Enhancement of surface graft density of MPEG on alginate/chitosan hydrogel microcapsules for protein repellency

Respiration-Triggered Release of Cinnamaldehyde from a Biomolecular Schiff Base Composite for Preservation of Perishable Food

One-third of the food produced worldwide is wasted annually and never consumed, of which ≈ 40-50% are perishable vegetables and fruits (VFs). Although various methods are proposed to reduce this loss, high manufacturing costs and food safety concerns pose significant challenges for the preservation of VFs. Herein, a respiration-triggered, self-saving strategy for the preservation of perishable products based on a biomolecular Schiff base composite fabricated by imidization of chitosan and cinnamaldehyde (CS-Cin) is reported. Ripening of VFs produces acid moisture and triggers a Schiff base reaction in CS-Cin, permitting the release of volatile Cin into the storage space. This enables versatile preservation by placing CS-Cin on the side without the need to touch the food, like the desiccant packet in a food packaging bag, while the rotting of VFs is retarded in a self-saving manner. As a result, the lifetimes of broccoli and strawberries are extended from 2 to 8 days. Furthermore, CS-Cin with restored preservative properties can be repeatedly recycled from used CS via imidization with Cin. Compared with conventional techniques, the preservatives are easy to use, versatile, and cost-effective, and the respiration-responsive release of Cin empowers a self-saving approach toward the smart preservation of perishable food.

Cell microencapsulation technologies for sustained drug delivery: Latest advances in efficacy and biosafety

The development of cell microencapsulation systems began several decades ago. However, today few systems have been tested in clinical trials. For this reason, in the last years, researchers have directed efforts towards trying to solve some of the key aspects that still limit efficacy and biosafety, the two major criteria that must be satisfied to reach the clinical practice. Regarding the efficacy, which is closely related to biocompatibility, substantial improvements have been made, such as the purification or chemical modification of the alginates that normally form the microspheres. Each of the components that make up the microcapsules has been carefully selected to avoid toxicities that can damage the encapsulated cells or generate an immune response leading to pericapsular fibrosis. As for the biosafety, researchers have developed biological circuits capable of actively responding to the needs of the patients to precisely and accurately release the demanded drug dose. Furthermore, the structure of the devices has been subject of study to adequately protect the encapsulated cells and prevent their spread in the body. The objective of this review is to describe the latest advances made by scientist to improve the efficacy and biosafety of cell microencapsulation systems for sustained drug delivery, also highlighting those points that still need to be optimized.

Microfluidic Fabrication of Structure-Controlled Chitosan Microcapsules via Interfacial Cross-Linking of Droplet Templates

In this work, a simple and flexible method for the fabrication of chitosan microcapsules with controllable structures and functions via the interfacial cross-linking reaction of the water-in-oil (W/O) emulsion templates is developed. The interfacial cross-linking reactions of chitosan and terephthalaldehyde (TPA) in W/O emulsion templates are comprehensively studied. The interfacial cross-linking reactions of the droplet templates in both batchwise and continuous conditions are studied. A poly(dimethylsiloxane) (PDMS) droplet-capture microfluidic chip is fabricated to investigate the interfacial reaction in continuous conditions online. In this study, the size and shell thickness of the microcapsules are affected by the preparation condition, such as the template size, emulsifier concentration, TPA concentration, and cross-linking time. Moreover, the size and shell thickness changes of chitosan microcapsules prepared in continuous conditions are much faster than those prepared in batchwise conditions. By regulating the preparation parameters, the microcapsules with controllable structures are fabricated in both batchwise and continuous conditions. The drug release behaviors of the microcapsules with controllable structures are studied. Furthermore, by adding magnetic nanoparticles to the aqueous solution, magnetic-responsive microcapsules are fabricated easily. This work provides valuable guidance for the controllable fabrication of chitosan microcapsules with designed structures and functions via single emulsion templates.

Carbohydrate-Based Micro/Nanocapsules With Controlled External Surface for Medical Applications

Micro/nanocapsules would have many more applications if we were able to controllably populate their surface with various chemical moieties. The present review introduces a novel variant of interfacial polymerization (IP) as a very robust method of manufacturing reservoir micro/nanocapsules equipped with several different functionalities on the capsules' surface. We call the method—IPCESCO (Interfacial Polymerization for Capsules' External Surface Control). As always in IP, the capsules' forming reaction is between monomers dissolved in opposite phases (oil or water) and takes place at the interface. Each monomer carries two or more functionalities reacting with functional groups of the monomer dissolved in the other phase. IPCESCO requires that one or both monomers are additionally equipped with (protected) functional groups interfering neither with the payload nor with the polymer formation. These additional groups end up everywhere in the polymeric shell but most importantly they are present on the external surface of capsules. These “handles” allow for the introduction of various moieties onto the capsules' surface. Since carbohydrate chemists developed a plurality of protecting and deprotecting methods for various functional groups such as aldehyde and hydroxyl, modified mono, and oligosaccharides are particularly well-suited to act as monomers in IPCESCO. The article discusses possible monomers and their synthesis, the transformation of protected reactive groups on the external capsules' surface into the desired functionalities, the control of the number of moieties on the surface and the capsules surface's architecture. The most important application of the novel encapsulation technology is in drug delivery. Possible surface units facilitating capsules' transport in the body, delivery to specific locations and mechanisms of capsules rupture are also addressed. Other applications of novel capsules include an ultra-sensitive quantitation and removal of pathogens, transport of nutrients in plants, detection of various antigens and other parameters in single cells.

Three-Dimensional (3-D) Printing Technology Exploited for the Fabrication of Drug Delivery Systems

BACKGROUND

The conventional dosage forms cannot be administered to all patients because of interindividual variability found among people of different race coupled with different metabolism and cultural necessities. Therefore, to address this global issue there is a growing focus on the fabrication of new drug delivery systems customised to individual needs. Medicinal products printed using 3-D technology are transforming the current medicine business to a plausible alternative of conventional medicines.

METHODS

The PubMed database and Google scholar were browsed by keywords of 3-D printing, drug delivery, and personalised medicine. The data about techniques employed in the manufacturing of 3-D printed medicines and the application of 3-D printing technology in the fabrication of individualised medicine were collected, analysed and discussed.

RESULTS

Numerous techniques can fabricate 3-D printed medicines however, printing-based inkjet, nozzle-based deposition and laser-based writing systems are the most popular 3-D printing methods which have been employed successfully in the development of tablets, polypills, implants, solutions, nanoparticles, targeted and topical dug delivery. In addition, the approval of Spritam® containing levetiracetam by FDA as the primary 3-D printed drug product has boosted its importance. However, some drawbacks such as suitability of manufacturing techniques and the available excipients for 3-D printing need to be addressed to ensure simple, feasible, reliable and reproducible 3-D printed fabrication.

CONCLUSION

3-D printing is a revolutionary in pharmaceutical technology to cater the present and future needs of individualised medicines. Nonetheless, more investigations are required on its manufacturing aspects in terms cost effectiveness, reproducibility and bio-equivalence.

Fabrication of Composite Hydrogels Based on Soy Protein Isolate and their Controlled Globular Protein Delivery

Soy protein isolate (SPI) protein/polymer composite hydrogels (PPCGs) are fabricated in a urea solution of SPI using acrylic acid as monomer, ammonium persulphate (APS) as initiator, and N,N-methylenebisacrylamide (BIS) and glutaraldehyde (GA) as cross-linking agents. The scanning electron microscope (SEM) results show that SPI/polyacrylic (PAA) composite hydrogels formed network structure. In particular, in the absence of cross-linking agent (GA), the network structure of composite hydrogels is also formed by BIS cross-linking chains of PAA and the hydrophobic interactions between peptides from SPI and chain of PAA. In addition, composite hydrogels have good water absorption and present excellent pH sensitivity. Composite hydrogels adsorb bovine serum albumin (BSA) with higher adsorption capacity. BSA is the control released in pH 7.4 buffers and the accumulative release ratio achieved is 90%. It will be expected that these protein/polymer composite hydrogels could be applied for drug sustained release materials.

Preparation of Novel Nano-Sized Hydrogel Microcapsules via Layer-By-Layer Assembly as Delivery Vehicles for Drugs onto Hygiene Paper

Hydrogel microcapsules are improved transplantation delivery vehicles for pharmaceuticals by effectively segregating the active ingredients from the surroundings and delivering them to a certain target site. Layer-by-layer (LbL) assembly is an attractive process to fabricate the nano-sized hydrogel microcapsules. In this study, nano-sized hydrogel microcapsules were prepared through LbL assembly using calcium carbonate nanoparticles (CaCO₃ NPs) as the sacrificial inorganic template, sodium alginate (SA) and polyethyleneimine (PEI) as the shell materials. Ciprofloxacin was used to study the encapsulation and release properties of the hydrogel microcapsules. The hydrogel microcapsules were further adsorbed onto the paper to render antimicrobial properties. The results showed that the mean size of the CaCO₃ template was reduced after dispersing into sodium n-dodecyl sulfate (SDS) solution under sonication. Transmission electron microscope (TEM) and atomic force microscope (AFM) revealed that some hydrogel microcapsules had a diameter under 200 nm, typical creases and collapses were found on the surface. The nano-sized PEI/SA hydrogel microcapsules showed high loading capacity of ciprofloxacin and a sustained release. PEI/SA hydrogel microcapsules rendered good antimicrobial properties onto the paper by the adsorption of hydrogel microcapsules, however, the mechanical properties of the hygiene paper were decreased.

Made-on-demand, complex and personalized 3D-printed drug products

Layer-by-layer fabrication of three dimensional (3D) objects from digital models is called 3D printing. This technology established just about three decades ago at the confluence of materials science, chemistry, robotics, and optics researches to ease the fabrication of UV-cured resin prototypes. The 3D technology was rapidly considered as a standard instrument in the aerospace, automotive, and consumer goods production factories. Nowadays, research interests in the 3D printed products have been raised and achieved ever-increasing traction in the pharmaceutical industry; so that, the first 3D printed drug product was approved by FDA in August 2015. This editorial summarizes the competitive advantages of the 3D printing for the made-on-demand, personalized and complex products, manufacturing of which establish opportunities for enhancing the accessibility, effectiveness, and safety of drugs.

In Vitro and In Vivo Biocompatibility Evaluation of Polyallylamine and Macromolecular Heparin Conjugates Modified Alginate Microbeads

Host reactivity to biocompatible immunoisolation devices is a major challenge for cellular therapies, and a human screening model would be of great value. We designed new types of surface modified barium alginate microspheres, and evaluated their inflammatory properties using human whole blood, and the intraperitoneal response after three weeks in Wistar rats. Microspheres were modified using proprietary polyallylamine (PAV) and coupled with macromolecular heparin conjugates (Corline Heparin Conjugate, CHC). The PAV-CHC strategy resulted in uniform and stable coatings with increased anti-clot activity and low cytotoxicity. In human whole blood, PAV coating at high dose (100 µg/ml) induced elevated complement, leukocyte CD11b and inflammatory mediators, and in Wistar rats increased fibrotic overgrowth. Coating of high dose PAV with CHC significantly reduced these responses. Low dose PAV (10 µg/ml) ± CHC and unmodified alginate microbeads showed low responses. That the human whole blood inflammatory reactions paralleled the host response shows a link between inflammatory potential and initial fibrotic response. CHC possessed anti-inflammatory activity, but failed to improve overall biocompatibility. We conclude that the human whole blood assay is an efficient first-phase screening model for inflammation, and a guiding tool in development of new generation microspheres for cell encapsulation therapy.

Co-encapsulation and co-transplantation of mesenchymal stem cells reduces pericapsular fibrosis and improves encapsulated islet survival and function when allografted

Pericapsular fibrotic overgrowth (PFO) is associated with poor survival of encapsulated islets. A strategy to combat PFO is the use of mesenchymal stem cells (MSC). MSC have anti-inflammatory properties and their potential can be enhanced by stimulation with proinflammatory cytokines. This study investigated whether co-encapsulation or co-transplantation of MSC with encapsulated islets would reduce PFO and improve graft survival. Stimulating MSC with a cytokine cocktail of IFN-γ and TNF-α enhanced their immunosuppressive potential by increasing nitric oxide production and secreting higher levels of immunomodulatory cytokines. In vitro, co-encapsulation with MSC did not affect islet viability but significantly enhanced glucose-induced insulin secretion. In vivo, normoglycemia was achieved in 100% mice receiving islets co-encapsulated with stimulated MSC as opposed to 71.4% receiving unstimulated MSC and only 9.1% receiving encapsulated islets alone. Microcapsules retrieved from both unstimulated and stimulated MSC groups had significantly less PFO with improved islet viability and function compared to encapsulated islets alone. Levels of peritoneal immunomodulatory cytokines IL-4, IL-6, IL-10 and G-CSF were significantly higher in MSC co-encapsulated groups. Similar results were obtained when encapsulated islets and MSC were co-transplanted. In summary, co-encapsulation or co-transplantation of MSC with encapsulated islets reduced PFO and improved the functional outcome of allotransplants.

Encapsulated Islet Transplantation: Where Do We Stand?

Transplantation of pancreatic islets encapsulated within immuno-protective microcapsules is a strategy that has the potential to overcome graft rejection without the need for toxic immunosuppressive medication. However, despite promising preclinical studies, clinical trials using encapsulated islets have lacked long-term efficacy, and although generally considered clinically safe, have not been encouraging overall. One of the major factors limiting the long-term function of encapsulated islets is the host's immunological reaction to the transplanted graft which is often manifested as pericapsular fibrotic overgrowth (PFO). PFO forms a barrier on the capsule surface that prevents the ingress of oxygen and nutrients leading to islet cell starvation, hypoxia and death. The mechanism of PFO formation is still not elucidated fully and studies using a pig model have tried to understand the host immune response to empty alginate microcapsules. In this review, the varied strategies to overcome or reduce PFO are discussed, including alginate purification, altering microcapsule geometry, modifying alginate chemical composition, co-encapsulation with immunomodulatory cells, administration of pharmacological agents, and alternative transplantation sites. Nanoencapsulation technologies, such as conformal and layer-by-layer coating technologies, as well as nanofiber, thin-film nanoporous devices, and silicone based NanoGland devices are also addressed. Finally, this review outlines recent progress in imaging technologies to track encapsulated cells, as well as promising perspectives concerning the production of insulin-producing cells from stem cells for encapsulation.

Controlling Gel Structure to Modulate Cell Adhesion and Spreading on the Surface of Microcapsules

The surface properties of implanted materials or devices play critical roles in modulating cell behavior. However, the surface properties usually affect cell behaviors synergetically so that it is still difficult to separately investigate the influence of a single property on cell behavior in practical applications. In this study, alginate-chitosan (AC) microcapsules with a dense or loose gel structure were fabricated to understand the effect of gel structure on cell behavior. Cells preferentially adhered and spread on the loose gel structure microcapsules rather than on the dense ones. The two types of microcapsules exhibited nearly identical surface positive charges, roughness, stiffness, and hydrophilicity; thus, the result suggested that the gel structure was the principal factor affecting cell behavior. X-ray photoelectron spectroscopy analyses demonstrated that the overall percentage of positively charged amino groups was similar on both microcapsules. The different gel structures led to different states and distributions of the positively charged amino groups of chitosan, so we conclude that the loose gel structure facilitated greater cell adhesion and spreading mainly because more protonated amino groups remained unbound and exposed on the surface of these microcapsules.

Contribution of polymeric materials to progress in xenotransplantation of microencapsulated cells: a review

Cell microencapsulation and subsequent transplantation of the microencapsulated cells require multidisciplinary approaches. Physical, chemical, biological, engineering, and medical expertise has to be combined. Several natural and synthetic polymeric materials and different technologies have been reported for the preparation of hydrogels, which are suitable to protect cells by microencapsulation. However, owing to the frequent lack of adequate characterization of the hydrogels and their components as well as incomplete description of the technology, many results of in vitro and in vivo studies appear contradictory or cannot reliably be reproduced. This review addresses the state of the art in cell microencapsulation with special focus on microencapsulated cells intended for xenotransplantation cell therapies. The choice of materials, the design and fabrication of the microspheres, as well as the conditions to be met during the cell microencapsulation process, are summarized and discussed prior to presenting research results of in vitro and in vivo studies. Overall, this review will serve to sensitize medically educated specialists for materials and technological aspects of cell microencapsulation.

3D-printing and the effect on medical costs: a new era?

3D-printing (3DP) is the art and science of printing in a new dimension using 3D printers to transform 3D computer aided designs (CAD) into life-changing products. This includes the design of more effective and patient-friendly pharmaceutical products as well as bio-inspired medical devices. It is poised as the next technology revolution for the pharmaceutical and medical-device industries. After decorous implementation scientists in collaboration with CAD designers have produced innovative medical devices ranging from pharmaceutical tablets to surgical transplants of the human face and skull, spinal implants, prosthetics, human organs and other biomaterials. While 3DP may be cost-efficient, a limitation exists in the availability of 3D printable biomaterials for most applications. In addition, the loss of skilled labor in producing medical devices such as prosthetics and other devices may affect developing economies. This review objectively explores the potential growth and impact of 3DP costs in the medical industry.

Unimolecular micelles from graft copolymer with binary side chains

A novel amphiphilic binary graft copolymer was synthesized and used to prepare unimolecular micelles by intramolecular association.

An improved model for exploring the effect of physicochemical properties of alginate-based microcapsules on their fibrosis formation in vivo

An effectivein vitromodel established forexploring the effect ofthephysicochemical properties of alginate-based microcapsules on their fibrosis formation.

Redox-mediated dissociation of PEG–polypeptide-based micelles for on-demand release of anticancer drugs

The biocompatible polypeptide-based micelles that can rapidly disassemble for on-demand release of DOX under a redox environment are reported.

BMSCs laden injectable amino-diethoxypropane modified alginate-chitosan hydrogel for hyaline cartilage reconstruction

We developed an injectable hydrogel composed of amino-diethoxypropane modified alginate and chitosan, and also investigated bone marrow mesenchy + mal stromal cells (BMSCs) laden hydrogel for cartilage reconstruction in vitro and in vivo.

The relationship between the inflammatory response and cell adhesion on alginate-chitosan-alginate microcapsules after transplantation

Cell microencapsulation technology is a potential alternative therapy, but cell overgrowth and adhesion on the microcapsules after transplantation shortens their time of therapeutic efficacy. Inflammatory cells were the main cells that adhered to the microcapsules, so understanding the body's inflammatory processes would help to better identify the mechanisms of cell adhesion to the outer surface of the microcapsules. Our study measured the inflammatory cells and the cytokines and characterized the associated changes in the alginate-chitosan-alginate (ACA) microcapsules 1, 7, 14, and 28 days after implantation in the peritoneal cavity. Then the relationship between the inflammatory response and cell adhesion on the microcapsules was evaluated by multiple regression analysis. The results showed that the microcapsules did not evoke a systemic inflammatory response, but initiated a local inflammatory response in the peritoneal cavity. Furthermore, the correlation analysis showed that the level of cell adhesion on the microcapsules was related to the number of lymphocytes and macrophages, and the amount of IL-6, IL-10, and MCP-1 in the peritoneal cavity. Our results may provide a foundation for reducing the immune response to these microcapsules, prolonging graft survival and improving the efficacy of these treatments.

3-dimensional (3D) fabricated polymer based drug delivery systems

Drug delivery from 3-dimensional (3D) structures is a rapidly growing area of research. It is essential to achieve structures wherein drug stability is ensured, the drug loading capacity is appropriate and the desired controlled release profile can be attained. Attention must also be paid to the development of appropriate fabrication machinery that allows 3D drug delivery systems (DDS) to be produced in a simple, reliable and reproducible manner. The range of fabrication methods currently being used to form 3D DDSs include electrospinning (solution and melt), wet-spinning and printing (3-dimensional). The use of these techniques enables production of DDSs from the macro-scale down to the nano-scale. This article reviews progress in these fabrication techniques to form DDSs that possess desirable drug delivery kinetics for a wide range of applications.

Stabilization of layer-by-layer engineered multilayered hollow microspheres

Polymer multilayered hollow microspheres prepared by layer-by-layer (LbL) self-assembly attract more and more interest due to their unique application, especially as drug delivery system (DDS). Unfortunately, the multilayered hollow microspheres assembled via weak linkages could fuse and/or aggregate in high ionic strength media or strong acidic or basic media. This severely restricts the practical applications of the multilayered hollow microspheres as DDS in human physiological medium. In the present work, the progress in stabilization of the multilayered hollow microspheres is reviewed, with emphasis on the assembling process and their crosslinking mechanism.

Chemically crosslinked alginate porous microcarriers modified with bioactive molecule for expansion of human hepatocellular carcinoma cells

Microcarrier is an essential matrix for the large-scale culture of anchorage-dependent cells. In this study, chemical cross-linked alginate porous microcarriers (AMC) were prepared using microemulsion and freeze-drying technology. Moreover, chitosan was coated on the surface of microcarriers (AMC-CS) via electrostatic interactions to improve the mechanical strength. The size of AMC can be modulated through adjusting the concentration of alginate, amount of dispersant and stirring rate. The surface chemical characteristics and morphology of AMC-CS were evaluated by Fourier transformed infrared, X-ray photoelectron spectroscopy, and scanning electron microscope. Fibronectin (Fn) or heparin/basic fibroblast growth factor (bFGF) was then immobilized on the surface of microcarriers via layer-by-layer technology to improve the cytocompatibility. Our data suggested that the size of AMC can be accurately modulated from 90 μm to 900 μm with a narrow size distribution. Micropore structures of AMC-CS were relatively disordered and the pore size ranged between 20 μm and 100 μm. Using AMC after modified with Fn or bFGF as the cell expansion microcarriers, we showed that the proliferation rates of HepG2 cells increased significantly, reaching to more than 30-fold of cell expansion after 10 days of culture, with minor cellular damage caused by the microcarriers. Moreover, the AMC microcarriers modified with Fn or bFGF can increase albumin secretion of HepG2. We suggest that our new modified AMC-based microcarriers will be an attractive candidate for the large-scale cell culture of therapeutic cells.

Properties of polylactide inks for solvent-cast printing of three-dimensional freeform microstructures

Solvent-cast printing is a highly versatile microfabrication technique that can be used to construct various geometries such as filaments, towers, scaffolds, and freeform circular spirals by the robotic deposition of a polymer solution ink onto a moving stage. In this work, we have performed a comprehensive characterization of the solvent-cast printing process using polylactide (PLA) solutions by analyzing the flow behavior of the solutions, the solvent evaporation kinetics, and the effect of process-related parameters on the crystallization of the extruded filaments. Rotational rheometry at low to moderate shear rates showed a nearly Newtonian behavior of the PLA solutions, while capillary flow analysis based on process-related data indicated shear thinning at high shear rates. Solvent vaporization tests suggested that the internal diffusion of the solvent through the filaments controlled the solvent removal of the extrudates. Different kinds of three-dimensional (3D) structures including a layer-by-layer tower, nine-layer scaffold, and freeform spiral were fabricated, and a processing map was given to show the proper ranges of process-related parameters (i.e., polymer content, applied pressure, nozzle diameter, and robot velocity) for the different geometries. The results of differential scanning calorimetry revealed that slow solvent evaporation could increase the ability of PLA to complete its crystallization process during the filament drying stage. The method developed here offers a new perspective for manufacturing complex structures from polymer solutions and provides guidelines to optimize the various parameters for 3D geometry fabrication.

Improving stability and biocompatibility of alginate/chitosan microcapsule by fabricating bi-functional membrane

Cell encapsulation technology holds promise for the cell-based therapy. But poor mechanical strength and biocompatibility of microcapsule membrane are still obstacles for the clinical applications. A novel strategy is presented to prepare AC₁ C₂ A microcapsules with bi-functional membrane (that is, both desirable biocompatibility and membrane stability) by sequentially complexing chitosans with higher deacetylation degree (C₁) and lower deacetylation degree (C₂) on alginate (A) gel beads. Both in vitro and in vivo evaluation of AC₁C₂ A microcapsules demonstrate higher membrane stability and less cell adhesion, because the introduction of C₂ increases membrane strength and decreases surface roughness. Moreover, diffusion test of AC₁C₂ A microcapsules displays no inward permeation of IgG protein suggesting good immunoisolation function. The results demonstrate that AC₁C₂ A microcapsules with bi-functional membrane could be a promising candidate for microencapsulated cell implantation with cost effective usage of naturally biocompatible polysaccharides.