Amine modification of thermally carbonized porous silicon with silane coupling chemistry

Ultrathin Ionic Diodes with Electrostatically Heterogeneous Hybrid Interfaces of Nanoporous SiO2 Nanofilms and Polymer Layer-by-Layer Multilayers

Nanofluidic ionic diodes have attracted much attention due to their unique functions as unidirectional ion transportation ability and promising applications from molecular sensing, and energy harvesting to emerging neuromorphic devices. However, it remains a challenge to fabricate diode-like nanofluidic systems with ultrathin film thickness <100 nm. Herein the formation of ultrathin ionic diodes from hybrid nanoassemblies of nanoporous (NP) SiO2 nanofilms and polyelectrolyte layer-by-layer (LbL) multilayers is described. Ultrathin ionic diodes are prepared by integrating polyelectrolyte multilayers onto photo-oxidized NP SiO2 nanofilms obtained from silsesquioxane-containing block copolymer thin films as a template. The obtained ultrathin ionic diodes exhibit ion current rectification (ICR) properties with high ICR factor = ≈20 under low ionic strength and asymmetric pH conditions. It is concluded that this ICR behavior arises from effective ion accumulation and depletion at the interface of NP SiO2 nanofilms and LbL multilayers attributed to high ion selectivity by combining the experimental data and theoretical calculations using finite element methods. These results demonstrate that the hybrid nano assemblies of NP SiO2 nanofilms and polyelectrolyte LbL multilayers have potential applications for (bio)sensing materials and integrated ionic circuits for seamless connection of human-machine interfaces.

Surface chemistry of spiky silica nanoparticles tailors polyethyleneimine binding and intracellular DNA delivery

Cellular delivery of DNA using silica nanoparticles has attracted great attention. Typically, polyethyleneimine (PEI) is used to form a silica/PEI composite vector. Understanding the interactions at the silica and PEI interface is important for successful DNA delivery and transfection, especially for silica with different surface functionality. Herein, we report that a higher content of hydrogen boning formed between PEI molecules and phosphonate modified silica nanoparticles could slow down the PEI dissolution from the freeze-dried solid composites into aqueous solution than the bare silica counterpart. The pronounced PEI retention ability through phosphonation of silica nanoparticles effectively improves the transfection efficiency due to the high DNA binding affinity extracellularly, effective lysosome escape and high nuclear entry of both PEI and DNA intracellularly. Our study provides a fundamental understanding on designing effective silica-PEI-based nano-vectors for DNA delivery applications.

Effect of Saccharides Coating on Antibacterial Potential and Drug Loading and Releasing Capability of Plasma Treated Polylactic Acid Films

More than half of the hospital-associated infections worldwide are related to the adhesion of bacteria cells to biomedical devices and implants. To prevent these infections, it is crucial to modify biomaterial surfaces to develop the antibacterial property. In this study, chitosan (CS) and chondroitin sulfate (ChS) were chosen as antibacterial coating materials on polylactic acid (PLA) surfaces. Plasma-treated PLA surfaces were coated with CS either direct coating method or the carbodiimide coupling method. As a next step for the combined saccharide coating, CS grafted samples were immersed in ChS solution, which resulted in the polyelectrolyte complex (PEC) formation. Also in this experiment, to test the drug loading and releasing efficiency of the thin film coatings, CS grafted samples were immersed into lomefloxacin-containing ChS solution. The successful modifications were confirmed by elemental composition analysis (XPS), surface topography images (SEM), and hydrophilicity change (contact angle measurements). The carbodiimide coupling resulted in higher CS grafting on the PLA surface. The coatings with the PEC formation between CS-ChS showed improved activity against the bacteria strains than the separate coatings. Moreover, these interactions increased the lomefloxacin amount adhered to the film coatings and extended the drug release profile. Finally, the zone of inhibition test confirmed that the CS-ChS coating showed a contact killing mechanism while drug-loaded films have a dual killing mechanism, which includes contact, and release killing.

Designing Electrochemical Biosensing Platforms Using Layered Carbon-Stabilized Porous Silicon Nanostructures

Porous silicon (pSi) is an established porous material that offers ample opportunities for biosensor design thanks to its tunable structure, versatile surface chemistry, and large surface area. Nonetheless, its potential for electrochemical sensing is relatively unexplored. This study investigates layered carbon-stabilized pSi nanostructures with site-specific functionalities as an electrochemical biosensor. A double-layer nanostructure combining a top hydrophilic layer of thermally carbonized pSi (TCpSi) and a bottom hydrophobic layer of thermally hydrocarbonized pSi (THCpSi) is prepared. The modified layers are formed in a stepwise process, involving first an electrochemical anodization step to generate a porous layer with precisely defined pore morphological features, followed by deposition of a thin thermally carbonized coating on the pore walls via temperature-controlled acetylene decomposition. The second layer is then generated beneath the first by following the same two-step process, but the acetylene decomposition conditions are adjusted to deposit a thermally hydrocarbonized coating. The double-layer platform features excellent electrochemical properties such as fast electron-transfer kinetics, which underpin the performance of a TCpSi-THCpSi voltammetric DNA sensor. The biosensor targets a 28-nucleotide single-stranded DNA sequence with a detection limit of 0.4 pM, two orders of magnitude lower than the values reported to date by any other pSi-based electrochemical DNA sensor.

Reinforcing Poly(methyl methacrylate) with Bacterial Cellulose Nanofibers Chemically Modified with Methacryolyl Groups

Nanofibrillated bacterial cellulose (NFBC), a type of cellulose nanofiber biosynthesized by Gluconacetobacter sp., has extremely long (i.e., high-aspect-ratio) fibers that are expected to be useful as nanofillers for fiber-reinforced composite resins. In this study, we investigated a composite of NFBC and poly(methyl methacrylate) (PMMA), a highly transparent resin, with the aim of improving the mechanical properties of the latter. The abundant hydroxyl groups on the NFBC surface were silylated using 3-(methacryloyloxy)propyltrimethoxysilane (MPTMS), a silane coupling agent bearing a methacryloyl group as the organic functional group. The surface-modified NFBC was homogeneously dispersed in chloroform, mixed with neat PMMA, and converted into PMMA composites using a simple solvent-casting method. The tensile strength and Young’s modulus of the composite increased by factors of 1.6 and 1.8, respectively, when only 0.10 wt% of the surface-modified NFBC was added, without sacrificing the maximum elongation rate. In addition, the composite maintained the high transparency of PMMA, highlighting that the addition of MPTMS-modified NFBC easily reinforce PMMA. Furthermore, interactions involving the organic functional groups of MPTMS were found to be very important for reinforcing PMMA.

Quantitative Analysis of Porous Silicon Nanoparticles Functionalization by 1H NMR

Porous silicon (PSi) nanoparticles have been applied in various fields, such as catalysis, imaging, and biomedical applications, because of their large specific surface area, easily modifiable surface chemistry, biocompatibility, and biodegradability. For biomedical applications, it is important to precisely control the surface modification of PSi-based materials and quantify the functionalization density, which determines the nanoparticle’s behavior in the biological system. Therefore, we propose here an optimized solution to quantify the functionalization groups on PSi, based on the nuclear magnetic resonance (NMR) method by combining the hydrolysis with standard ¹H NMR experiments. We optimized the hydrolysis conditions to degrade the PSi, providing mobility to the molecules for NMR detection. The NMR parameters were also optimized by relaxation delay and the number of scans to provide reliable NMR spectra. With an internal standard, we quantitatively analyzed the surficial amine groups and their sequential modification of polyethylene glycol. Our investigation provides a reliable, fast, and straightforward method in quantitative analysis of the surficial modification characterization of PSi requiring a small amount of sample.

Mesoporous Silica Particles as Drug Delivery Systems-The State of the Art in Loading Methods and the Recent Progress in Analytical Techniques for Monitoring These Processes

Conventional administration of drugs is limited by poor water solubility, low permeability, and mediocre targeting. Safe and effective delivery of drugs and therapeutic agents remains a challenge, especially for complex therapies, such as cancer treatment, pain management, heart failure medication, among several others. Thus, delivery systems designed to improve the pharmacokinetics of loaded molecules, and allowing controlled release and target specific delivery, have received considerable attention in recent years. The last two decades have seen a growing interest among scientists and the pharmaceutical industry in mesoporous silica nanoparticles (MSNs) as drug delivery systems (DDS). This interest is due to the unique physicochemical properties, including high loading capacity, excellent biocompatibility, and easy functionalization. In this review, we discuss the current state of the art related to the preparation of drug-loaded MSNs and their analysis, focusing on the newest advancements, and highlighting the advantages and disadvantages of different methods. Finally, we provide a concise outlook for the remaining challenges in the field.

Optimized microwave-assisted functionalization and quantification of superficial amino groups on porous silicon nanostructured microparticles

This work presents an optimized microwave (MW)-assisted method for the chemical functionalization of porous silicon particles (PSip). 3-(Aminopropyl)triethoxysilane (APTES) was grafted on previously stabilized PSip. The functionalization efficiency was studied and optimized in terms of reaction time (Rt) and reaction temperature (RT) using a central composite design (CCD). The effect of MW irradiation on the surface coverage was found to strongly depend on the PSip surface chemistry, Rt, RT, and percentage of APTES. Quantification of grafted amino groups was performed by the ninhydrin method (NHIM); confirming the results by thermogravimetric analysis (TGA). Reacting with 5% APTES solution at 95 °C for 26 min was the best functionalization conditions. The efficiency of PSip-APTES prepared under the optimized conditions was compared to those functionalized by the traditional method; MW irradiation increases by 39% the number of functional groups grafted onto the PSip surfaces with the additional benefit of having a drastic reduction in Rt.

Nanofibrillated Bacterial Cellulose Modified with (3-Aminopropyl)trimethoxysilane under Aqueous Conditions: Applications to Poly(methyl methacrylate) Fiber-Reinforced Nanocomposites

The development of eco-friendly fiber-reinforced composite resins is an important objective from an environmental perspective, and nanofibrillated bacterial cellulose (NFBC), with extremely long high-aspect-ratio fibers, is a filler material with high potential for use in such composite resins. In this study, we investigated chemical modification of the surfaces of NFBC fibers by coupling with (3-aminopropyl)trimethoxysilane and fabricated nanocomposite materials using the prepared surface-modified NFBC. The product prepared by the one-pot reaction of (3-aminopropyl)trimethoxysilane with NFBC microfibrils dispersed in aqueous acid retained the same nanofibril structure as the intact NFBC. The degree of molar substitution and the silicon states on the surface of the product depended on the NFBC/(3-aminopropyl)trimethoxysilane ratio. The thermal analysis revealed that the thermal degradation temperature of the products increases with an increase of degree of molar substitution. Highly transparent (78-89% at 600 nm) poly(methyl methacrylate)-based nanocomposites were prepared by solvent casting; the nanocomposite containing 1.0 wt % (3-aminopropyl)trimethoxysilylated NFBC was only 8% less transparent than neat poly(methyl methacrylate) at 600 nm. In addition, the tensile strength of the nanocomposite was more than twice that of neat poly(methyl methacrylate) when 1 wt % of the surface-modified NFBC was added. The surface-modified NFBC is expected to be a reinforcing nanofiber material that imparts excellent physical properties to fiber-reinforced resins.

Lyophilization enabled disentanglement of polyethylenimine on rambutan-like silica nanoparticles for enhanced plasmid DNA delivery

Polyethylenimine (PEI) functionalization onto nanoparticles is a widely used strategy for constructing particulate vectors for gene delivery. However, how to control the conformation of PEI chains and the resultant impact on gene transfection efficiency remains largely unexplored. Herein, we report that drying methods dramatically affect the conformation of PEI chains modified on the surface of silica nanoparticles and consequently the plasmid DNA transfection performance. Specifically, lyophilization renders less entangled PEI compared to commonly used vacuum drying as evidenced by an elevated glass transition temperature. The lyophilization induced disentangled conformation is likely associated with the solid-to-gas phase transition drying mechanism, which removes the bound crystal water content and thus reduces hydrogen bonding between amines. Moreover, we find that the stretched PEI chains on the surface of rambutan-like silica nanoparticles promote their binding capacity towards plasmid DNA molecules and thereby enhanced gene delivery and transfection efficiency. Our findings have provided new understanding about amine based polymers modified on nanoparticles, and have significant implications on the design of efficient particulate vectors for gene delivery.

Preparation and in vivo evaluation of red blood cell membrane coated porous silicon nanoparticles implanted with 155Tb

INTRODUCTION

Porous silicon (PSi) nanoparticles are capable of delivering therapeutic payloads providing targeted delivery and sustained release of the payloads. In this work we describe the development and proof-of-concept in vivo evaluation of thermally hydrocarbonized porous silicon (PSi) nanoparticles that are implanted with radioactive ¹⁵⁵Tb atoms and coated with red blood cell (RBC) membrane (¹⁵⁵Tb-THCPSi). The developed nanocomposites can be utilized as an intravenous delivery platform for theranostic radionuclides.

METHODS

THCPSi thin films were implanted with ¹⁵⁵Dy ions that decay to ¹⁵⁵Tb at the ISOLDE radioactive ion-beam (RIB) facility at CERN. The films were processed to nanoparticles by ball-milling and sonication, and subsequently coated with either a solid lipid and RBC membrane or solely with RBC membrane. The nanocomposites were evaluated in vitro for stability and in vivo for circulation half-life and ex vivo for biodistribution in Balb/c mice.

RESULTS

Nanoporous THCPSi films were successfully implanted with ¹⁵⁵Tb and processed to coated nanoparticles. The in vitro stability of the particles in plasma and buffer solutions was not significantly different between the particle types, and therefore the RBC membrane coated particles with less laborious processing method were chosen for the biological evaluation. The RBC membrane coating enhanced significantly the blood half-life compared to bare THCPSi particles. In the ex vivo biodistribution study a pronounced accumulation to the spleen was found, with lower uptake in the liver and a minor uptake in the lung, gall bladder and bone marrow.

CONCLUSIONS

We have demonstrated, using ¹⁵⁵Tb RIB-implanted PSi nanoparticles coated with mouse RBC membranes, the feasibility of using such a theranostic nanosystem for the delivery of RIB based radionuclides with prolonged circulation time.

ADVANCES IN KNOWLEDGE AND IMPLICATIONS FOR PATIENT CARE

For the first time, the RIB implantation technique has been utilized to produce PSi nanoparticle with a surface modified for better persistence in circulation. When optimized, these particles could be used in targeted radionuclide therapy with a combination of chemotherapeutic payload within the PSi structure.

Single-Cell Response to the Rigidity of Semiconductor Nanomembranes on Compliant Substrates

Single-crystalline semiconductor nanomembranes (NMs) bonded to compliant substrates are increasingly used for biomedical research and in health care. Nevertheless, there is a limited understanding of how individual cells sense the unique mechanical properties of these substrates and adjust their behavior in response to them. In this work, we performed proliferation assays, cytoskeleton analysis, and focal adhesion (FA) studies for NIH-3T3 fibroblasts on 220 and 20 nm single-crystalline Si on polydimethylsiloxane (PDMS) substrates with an elastic modulus of ∼31 kPa. We also characterized cell response on bulk Si as a reference. Our in vitro studies show that varying the thickness of the NM between 20 and 220 nm affects the proliferation rate of the cells, their cytoskeleton, fiber organization, spread area, and degree of FA. For example, cultured cells on 220 nm Si/PMDS exhibit the same response as on bulk Si, that is, they are well-spread with a pentagonal (or dendritic) shape and show a good organization of stress fibers and FAs. On the other hand, the cells on 20 nm Si/PDMS are spherical, with fiber organization and FAs in undetectable levels. We explained the results of our in vitro studies through a shear-lag mechanical model. The calculated FA-substrate contact stiffnesses for fibroblasts on bulk Si and 220 nm Si/PDMS closely match, and they are significantly higher than the stiffness of the integrin clutches and the plaque. Conversely, focal contacts with 20 nm Si/PDMS have comparable lateral compliance to adhesion-mediating intracellular organisms. In conclusion, our work relies on recent advances in NM technology to fill a critical knowledge gap about how individual cells sense and react to the mechanical properties of NM-based substrates. Our findings will have a major impact on the design of flexible electronic materials for applications in biomedical science and health care.

Fabrication and Characterization of Drug-Loaded Conductive Poly(glycerol sebacate)/Nanoparticle-Based Composite Patch for Myocardial Infarction Applications

Heart tissue engineering is critical in the treatment of myocardial infarction, which may benefit from drug-releasing smart materials. In this study, we load a small molecule (3i-1000) in new biodegradable and conductive patches for application in infarcted myocardium. The composite patches consist of a biocompatible elastomer, poly(glycerol sebacate) (PGS), coupled with collagen type I, used to promote cell attachment. In addition, polypyrrole is incorporated because of its electrical conductivity and to induce cell signaling. Results from the in vitro experiments indicate a high density of cardiac myoblast cells attached on the patches, which stay viable for at least 1 month. The degradation of the patches does not show any cytotoxic effect, while 3i-1000 delivery induces cell proliferation. Conductive patches show high blood wettability and drug release, correlating with the rate of degradation of the PGS matrix. Together with the electrical conductivity and elongation characteristics, the developed biomaterial fits the mechanical, conductive, and biological demands required for cardiac treatment.

Controlling and Predicting the Dissolution Kinetics of Thermally Oxidised Mesoporous Silicon Particles: Towards Improved Drug Delivery

Porous silicon (pSi) continues to receive considerable interest for use in applications ranging from sensors, biological scaffolds, therapeutic delivery systems to theranostics. Critical to all of these applications is pSi degradation and stabilization in biological media. Here we report on progress towards the development of a mechanistic understanding for the dissolution behavior of native (unoxidized) and thermally oxidized (200-600 °C) pSi microparticles. Fourier transform infrared (FTIR) spectroscopy was used to characterize the pSi surface chemistry after thermal oxidation. PSi dissolution was assessed using a USP method II apparatus by monitoring the production of orthosilicic acid, and the influence of gastro-intestinal (GI) fluids were examined. Fitting pSi dissolution kinetics with a sum of the exponential model demonstrated that the dissolution process strongly correlates with the three surface hydride species and their relative reactivity, and was supported by the observed FTIR spectral changes of pSi during dissolution. Finally, the presence of GI proteins was shown to hamper pSi dissolution by adsorption to the pSi surface acting as a barrier preventing water attack. These findings are significant in the optimal design of pSi particles for oral delivery and other controlled drug delivery applications.

Optically Active Nanomaterials for Bioimaging and Targeted Therapy

Non-invasive tracking for monitoring the selective delivery and transplantation of biotargeted agents in vivo has been employed as one of the most effective tools in the field of nanomedicine. Different nanoprobes have been developed and applied to bioimaging tissues and the treatment of diseases ranging from inflammatory and cardiovascular diseases to cancer. Herein, we will review the recent advances in the development of optics-responsive nanomaterials, including organic and inorganic nanoparticles, for multimodal bioimaging and targeted therapy. The main focus is placed on nanoprobe fabrication, mechanistic illustrations, and diagnostic, or therapeutical applications. These nanomedicine strategies have promoted a better understanding of the biological events underlying diverse disease etiologies, thereby facilitating diagnosis, illness evaluation, therapeutic effect, and drug discovery.

Automatic methodologies to perform loading and release assays of anticancer drugs from mesoporous silicon nanoparticles

Two automatic methodologies were developed to perform the loading and release assays of drugs from porous silicon (PSi) nanoparticles. 5-Fluorouracil (5-FU) was selected as a model drug, and different functionalized PSi nanoparticles were used. While for drug loading studies the reproducible characteristics of flow systems were explored regarding mixture and volumes taken, in the drug release flow methodology versatility in accommodating different devices around the valve were tested. Fluorescent properties of 5-FU were used with detection limit of 9 × 10^-4 mg L^-1 and a linear response up to 5 mg L^-1 The drug loading and release procedures were optimized in sequential injection analysis (SIA) systems obtaining a huge economy regarding the time spent (4 min towards 2 h). Batch and SIA methods were tested and compared for the different behaviours of the PSi nanoparticles towards both methodologies and no noteworthy differences were obtained with Student's t-test for loading with a calculated t value of 2.04 showing the absence of statistical differences. All the results present a RSD less than 10%. So, the developed automatic methodologies are a viable alternative to load drugs and to study the release profiles from PSi nanoparticles.

Surface Modification to Improve Properties of Materials

Surface properties of modern materials are usually inadequate in terms of wettability, adhesion properties, biocompatibility etc., so they should be modified prior to application or any further processing such as coating with functional materials. Both the morphological properties and chemical structure/composition should be modified in order to obtain a desired surface finish. Various treatment procedures have been employed, and many are based on the application of non-equilibrium gaseous media, especially gaseous plasma. Although such treatments have been studied extensively in past decades and actually commercialized, the exact mechanisms of interaction between reactive gaseous species and solid materials is still inadequately understood. This special issue provides recent trends in nanostructuring and functionalization of solid materials with the goal of improving their functional properties.

Visible Light Assisted Organosilane Assembly on Mesoporous Silicon Films and Particles

Porous silicon (PSi) is a versatile matrix with tailorable surface reactivity, which allows the processing of a range of multifunctional films and particles. The biomedical applications of PSi often require a surface capping with organic functionalities. This work shows that visible light can be used to catalyze the assembly of organosilanes on the PSi, as demonstrated with two organosilanes: aminopropyl-triethoxy-silane and perfluorodecyl-triethoxy-silane. We studied the process related to PSi films (PSiFs), which were characterized by X-ray photoelectron spectroscopy (XPS), time of flight secondary ion mass spectroscopy (ToF-SIMS) and field emission scanning electron microscopy (FESEM) before and after a plasma patterning process. The analyses confirmed the surface oxidation and the anchorage of the organosilane backbone. We further highlighted the surface analytical potential of ¹³C, ¹⁹F and ²⁹Si solid-state NMR (SS-NMR) as compared to Fourier transformed infrared spectroscopy (FTIR) in the characterization of functionalized PSi particles (PSiPs). The reduced invasiveness of the organosilanization regarding the PSiPs morphology was confirmed using transmission electron microscopy (TEM) and FESEM. Relevantly, the results obtained on PSiPs complemented those obtained on PSiFs. SS-NMR suggests a number of siloxane bonds between the organosilane and the PSiPs, which does not reach levels of maximum heterogeneous condensation, while ToF-SIMS suggested a certain degree of organosilane polymerization. Additionally, differences among the carbons in the organic (non-hydrolyzable) functionalizing groups are identified, especially in the case of the perfluorodecyl group. The spectroscopic characterization was used to propose a mechanism for the visible light activation of the organosilane assembly, which is based on the initial photoactivated oxidation of the PSi matrix.

Cellular Internalization-Induced Aggregation of Porous Silicon Nanoparticles for Ultrasound Imaging and Protein-Mediated Protection of Stem Cells

Nanotechnology employs multifunctional engineered materials in the nanoscale range that provides many opportunities for translational stem cell research and therapy. Here, a cell-penetrating peptide (virus-1 transactivator of transcription)-conjugated, porous silicon nanoparticle (TPSi NP) loaded with the Wnt3a protein to increase both the cell survival rate and the delivery precision of stem cell transplantation via a combinational theranostic strategy is presented. The TPSi NP with a pore size of 10.7 nm and inorganic framework enables high-efficiency loading of Wnt3a, prolongs Wnt3a release, and increases antioxidative stress activity in the labeled mesenchymal stem cells (MSCs), which are highly beneficial properties for cell protection in stem cell therapy for myocardial infarction. It is confirmed that the intracellular aggregation of TPSi NPs can highly amplify the acoustic scattering of the labeled MSCs, resulting in a 2.3-fold increase in the ultrasound (US) signal compared with that of unlabeled MSCs. The translational potential of the designed nanoagent for real-time US imaging-guided stem cell transplantation is confirmed via intramyocardial injection of labeled MSCs in a nude mouse model. It is proposed that the intracellular aggregation of protein drug-loaded TPSi NPs could be a simple but robust strategy for improving the therapeutic effect of stem cell therapy.

Impact of Pore Size and Surface Chemistry of Porous Silicon Particles and Structure of Phospholipids on Their Interactions

By exploiting its porous structure and high loading capacity, porous silicon (PSi) is a promising biomaterial to fabricate protocells and biomimetic reactors. Here, we have evaluated the impact of physicochemical properties of PSi particles [thermally oxidized PSi, TOPSi; annealed TOPSi, AnnTOPSi; (3-aminopropyl) triethoxysilane functionalized thermally carbonized PSi, APTES-TCPSi; and thermally hydrocarbonized PSi, THCPSi] on their surface interactions with different phospholipids. All of the four phospholipids were similarly adsorbed by the surface of PSi particles, except for TOPSi. Among four PSi particles, TOPSi with hydrophilic surface and smaller pore size showed the weakest adsorption toward phosphatidylcholines. By increasing the pore size from roughly 12.5 to 18.0 nm (TOPSi vs AnnTOPSi), the quantity of phosphatidylcholines adsorbed by TOPSi was enhanced to the same level of hydrophilic APTES-TCPSi and hydrophobic THCPSi. The 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) exhibited the highest release ratio of phospholipids from all four PSi particles, and phosphatidylserine (DPPS) showed the lowest release ratio of phospholipids from PSi particles, except for TOPSi, which adsorbed less phospholipids due to the small pore size. There is consistency in the release extent of phospholipids from PSi particles and the isosteric heat of adsorption. Overall, our study demonstrates the importance of pore size and surface chemistry of PSi particles as well as the structure of phospholipids on their interactions. The obtained information can be employed to guide the selection of PSi particles and phospholipids to fabricate highly ordered structures, for example, protocells, or biomimetic reactors.

Tailoring Porous Silicon for Biomedical Applications: From Drug Delivery to Cancer Immunotherapy

In the past two decades, porous silicon (PSi) has attracted increasing attention for its potential biomedical applications. With its controllable geometry, tunable nanoporous structure, large pore volume/high specific surface area, and versatile surface chemistry, PSi shows significant advantages over conventional drug carriers. Here, an overview of recent progress in the use of PSi in drug delivery and cancer immunotherapy is presented. First, an overview of the fabrication of PSi with various geometric structures is provided, with particular focus on how the unique geometry of PSi facilitates its biomedical applications, especially for drug delivery. Second, surface chemistry and modification of PSi are discussed in relation to the strengthening of its performance in drug delivery and bioimaging. Emerging technologies for engineering PSi-based composites are then summarized. Emerging PSi advances in the context of cancer immunotherapy are also highlighted. Overall, very promising research results encourage further exploration of PSi for biomedical applications, particularly in drug delivery and cancer immunotherapy, and future translation of PSi into clinical applications.

Thermally Carbonized Porous Silicon and Its Recent Applications

Recent progress in research on thermally carbonized porous silicon (TCPSi) and its applications is reported. Despite a slow start, thermal carbonization has now started to gain interest mainly due to new emerging areas for applications. These new areas, such as optical sensing, drug delivery, and energy storage, require stable surface chemistry and physical properties. TCPSi is known to have all of these desired properties. Herein, the above-listed properties of TCPSi are summarized, and the carbonization processes, functionalization, and characterization of TCPSi are reviewed. Moreover, some of the emerging fields of TCPSi applications are discussed and recent advances in the fields are introduced.

The impact of porous silicon nanoparticles on human cytochrome P450 metabolism in human liver microsomes in vitro

Engineered nanoparticles are increasingly used as drug carriers in pharmaceutical formulations. This study focuses on the hitherto unaddressed impact of porous silicon (PSi) nanoparticles on human cytochrome P450 (CYP) metabolism, which is the major detoxification route of most pharmaceuticals and other xenobiotics. Three different surface chemistries, including thermally carbonized PSi (TCPSi), aminopropylsilane-modified TCPSi (APTES-TCPSi) and alkyne-terminated thermally hydrocarbonized PSi (Alkyne-THCPSi), were compared for their effects on the enzyme kinetics of the major CYP isoforms (CYP1A2, CYP2A6, CYP2D6, and CYP3A4) in human liver microsomes (HLM) in vitro. The enzyme kinetic parameters, K_m and V_max, and the intrinsic clearance (CL_int) were determined using FDA-recommended, isoenzyme-specific model reactions with and without PSi nanoparticles. Data revealed statistically significant alterations of most isoenzyme activities in HLM in the presence of nanoparticles at 1mg/ml concentration, and polymorphic CYP2D6 was the most vulnerable to enzyme inhibition. However, the observed CYP2D6 inhibition was shown to be dose-dependent in case of TCPSi and Alkyne-THCPSi nanoparticles and attenuated at the concentrations below 1μg/ml. Adsorption of the probe substrates onto the hydrophobic Alkyne-THCPSi particles was also observed and taken into account in the determination of the kinetic parameters. Three polymer additives commonly used in pharmaceutical nanoformulations (Pluronics F68 and F127, and polyvinylalcohol) were also separately screened for their effects on CYP isoenzyme activities. These polymers had less effect on the enzyme kinetic parameters, and resulted in increased activity rather than enzyme inhibition, in contrast to the PSi nanoparticles. Although the chosen subcellular model (HLM) is not able to predict the cellular disposition of PSi nanoparticles in hepatocytes and thus provides limited information of probability of CYP interactions in vivo, the present study suggests that mechanistic interactions by the PSi nanoparticles or the polymer stabilizers may appear if these are effectively uptaken by the hepatocytes.

Active diffusion of nanoparticles of maternal origin within the embryonic brain

Aim: To investigate porous silicon (PSi) nanoparticles (NPs) behavior in the embryonic brain. Materials & methods: Fluorescently labeled PSi NPs were injected into the embryonic brains intraventricularly and to the mother intravenously (iv.). Brain histology from different time points up to 3 days was analyzed and live brains imaged with two-photon microscopy. Results: PSi NPs were able to penetrate 80% of the embryonic cortical depth. Particle motility was confirmed in real-time in vivo. PSi NPs were able to penetrate the embryonic cortex after either iv. maternal or intraventricular injection. No developmental of macromorphological changes or increased cell apoptosis was observed. Conclusion: PSi NPs penetrate deep in the brain tissues of embryos after intraventricular injection and after iv. injection to the mother.

Phenyl-functionalized magnetic palm-based powdered activated carbon for the effective removal of selected pharmaceutical and endocrine-disruptive compounds

Triethoxyphenylsilane (TEPS)-functionalized magnetic palm-based powdered activated carbon (MPPAC-TEPS) was prepared and characterized using various spectroscopic methods, and then tested for the removal of bisphenol A, carbamazepine, ibuprofen and clofibric acid. Magnetite film on MPPAC-TEPS was homogeneously coated on the outer surface of palm-based powdered activated carbon (PPAC) through a hydrothermal co-precipitation technique. Followed by silanization of phenyl-functionalized organosilane on MPPAC's magnetic film. As results, micro/mesopore surface area and volume increased without significant pore clogging and iron (Fe) dissolution under the acidic conditions was greatly decreased. The unique structural and chemical features of MPPAC-TEPS were found to be the main reasons for the enhanced adsorption rates and removal capacities of POPs. The presence of electrolytes and different pH values greatly affected the sorption efficiencies. The dominant sorption mechanism of POPs by MPPAC-TEPS was determined to be π-π interaction (physisorption), based on thermodynamic (ΔG°) and differential scanning calorimetry (DSC). Thermal regeneration at a low temperature (350 °C) was an effective method to desorb the retained POPs and enabled to reactivate MPPAC-TEPS with sustained sorption rates and capacities, whereas PPAC was largely exhausted. As a new type of sorbent for POPs, MPPAC-TEPS has operational advantages, such as magnetic separation and stable regeneration.

Aminosilane-Grafted Zirconia-Titiania-Silica Nanoparticles/Torlon Hollow Fiber Composites for CO2 Capture

In this work, the development of novel binary and ternary oxide/Torlon hollow fiber composites comprising zirconia, titania, and silica as amine supports was demonstrated. The resulting binary (Zr-Si/PAI-HF, Ti-Si/PAI-HF) and ternary (Zr-Ti-Si/PAI-HF) composites were then functionalized with monoamine-, diamine-, and triamine-substituted trialkoxysilanes and were evaluated in CO2 capture. Although the introduction of both Zr and Ti improved the CO2 adsorption capacity relative to that with Si/PAI-HF sorbents, zirconia was found to have a more favorable effect on the CO2 adsorption performance than titania, as previously demonstrated for amine sorbents in the powder form. The Zr-Ti-Si/PAI-HF sample with an oxide content of 20 wt % was found to exhibit a relatively high CO2 capacity, that is, 1.90 mmol g(-1) at atmospheric pressure under dry conditions, owing to more favorable synergy between the metal oxides and CO2 . The ternary fiber sorbent showed improved sorption kinetics and long-term stability in cyclic adsorption/desorption runs.

Antibacterial properties of nitric oxide-releasing porous silicon nanoparticles

In this study, the antibacterial efficacy of NO-releasing porous silicon nanoparticles (pSiNPs) is reported. NO-releasing pSiNPs were produced via the conjugation of S-nitrosothiol (SNO) and S-nitrosoglutathione (GSNO) donors to the nanoparticle surfaces. The release of the conjugated NO caused by the decomposition of the conjugated SNO and GSNO was boosted in the presence of ascorbic acid. The released NO was bactericidal to Gram-positive (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli), and eliminated bacterial growth within 2 h of incubation without compromising the viability of mammalian cells. These results demonstrate the advantages of NO-releasing pSiNPs for antibacterial applications, for example, in chronic wound treatment.

Novel delivery systems for improving the clinical use of peptides

Peptides have long been recognized as a promising group of therapeutic substances to treat various diseases. Delivery systems for peptides have been under development since the discovery of insulin for the treatment of diabetes. The challenge of using peptides as drugs arises from their poor bioavailability resulting from the low permeability of biological membranes and their instability. Currently, subcutaneous injection is clinically the most common administration route for peptides. This route is cost-effective and suitable for self-administration, and the development of appropriate dosing equipment has made performing the repeated injections relatively easy; however, only few clinical subcutaneous peptide delivery systems provide sustained peptide release. As a result, frequent injections are needed, which may cause discomfort and additional risks resulting from a poor administration technique. Controlled peptide delivery systems, able to provide required therapeutic plasma concentrations over an extended period, are needed to increase peptide safety and patient compliancy. In this review, we summarize the current peptidergic drugs, future developments, and parenteral peptide delivery systems. Special emphasis is given to porous silicon, a novel material in peptide delivery. Biodegradable and biocompatible porous silicon possesses some unique properties, such as the ability to carry exceptional high peptide payloads and to modify peptide release extensively. We have successfully developed porous silicon as a carrier material for improved parenteral peptide delivery. Nanotechnology, with its different delivery systems, will enable better use of peptides in several therapeutic applications in the near future.

Deferasirox-coated iron oxide nanoparticles as a potential cytotoxic agent

Two broad strategies for the use of iron chelators in cancer treatment have been explored.

Potential of porous silicon nanoparticles as an emerging platform for cancer theranostics

Currently, nanoscience is a major part of biomedical research, due to material advances that aid the development of new tools and techniques to replace traditional methods. Here we describe the theranostic potential of multifunctional porous silicon nanoparticles to target, image and treat cancer.

In situ Formation of a Monodispersed Spherical Mesoporous Nanosilica-Torlon Hollow-Fiber Composite for Carbon Dioxide Capture

We describe a new template-free method for the in situ formation of a monodispersed spherical mesoporous nanosilica-Torlon hollow-fiber composite. A thin layer of Torlon hollow fiber that comprises silica nanoparticles was created by the in situ extrusion of a tetraethyl orthosilicate/N-methyl-2-pyrrolidone solution in a sheath layer and a Torlon polymer dope in a core support layer. This new method can be integrated easily into current hollow-fiber composite fabrication processes. The hollow-fiber composites were then functionalized with 3-aminopropyltrimethoxy silane (APS) and evaluated for their CO2 -capture performance. The resulting APS-functionalized mesoporous silica nanoparticles/Torlon hollow fibers exhibited a high CO2 equilibrium capacity of 1.5 and 1.9 mmol g(-1) at 35 and 60 °C, respectively, which is significantly higher than values for fiber sorbents without nanoparticles reported previously.

Rapid, metal-free hydrosilanisation chemistry for porous silicon surface modification

Here, we report a novel surface modification for porous silicon (pSi). Hydroxyl-terminated pSi surfaces are modified with a hydrosilane via Si-H activation using the Lewis acid catalyst tris(pentafluorophenyl) borane. This surface reaction is fast and efficient at room temperature, and leads to a surface stabilised against hydrolytic attack in aqueous media. The resulting surface shows promise as a substrate for surface-assisted laser desorption/ionisation mass spectrometry.

Dual-drug delivery by porous silicon nanoparticles for improved cellular uptake, sustained release, and combination therapy

Dual-drug delivery of antiangiogenic and chemotherapeutic drugs can enhance the therapeutic effect for cancer therapy. Conjugation of methotrexate (MTX) to porous silicon (PSi) nanoparticles (MTX-PSi) with positively charged surface can improve the cellular uptake of MTX and inhibit the proliferation of cancer cells. Herein, MTX-PSi conjugates sustained the release of MTX up to 96 h, and the released fragments including MTX were confirmed by mass spectrometry. The intracellular distribution of the MTX-PSi nanoparticles was confirmed by transmission electron microscopy. Compared to pure MTX, the MTX-PSi achieved similar inhibition of cell proliferation in folate receptor (FR) over-expressing U87 MG cancer cells, and a higher effect in low FR-expressing EA.hy926 cells. Nuclear fragmentation analysis demonstrated programmed cell apoptosis of MTX-PSi in the high/low FR-expressing cancer cells, whereas PSi alone at the same dose had a minor effect on cell apoptosis. Finally, the porous structure of MTX-PSi enabled a successful concomitant loading of another anti-angiogenic hydrophobic drug, sorafenib, and considerably enhanced the dissolution rate of sorafenib. Overall, the MTX-PSi nanoparticles can be used as a platform for combination chemotherapy by simultaneously enhancing the dissolution rate of a hydrophobic drug and sustaining the release of a conjugated chemotherapeutic drug.

Systematic in vitro and in vivo study on porous silicon to improve the oral bioavailability of celecoxib

Mesoporous materials are promising candidates for improving dissolution rate of poorly water-soluble drugs in vitro and their bioavailability in vivo. In the present study, sixteen batches of celecoxib-loaded PSi particles with pore sizes ranging from 17 to 58 nm and celecoxib content from 5 to 36 w-% were prepared and a detailed physicochemical characterization of the drug was performed by several methods. Interaction between co-culture of Caco-2/HT29-MTX cells and unloaded PSi particles was tested in toxicity assays, and increased toxicity for particles with large pore size was observed. Dissolution rate of celecoxib was improved in vitro by lowering the drug loading degree which hindered the recrystallization of celecoxib on the external surface of the particles. The fastest permeation of loaded celecoxib through the co-culture monolayer as well as the highest bioavailability in rats was observed with the particles with small pore size and low loading degree. New insights were obtained on how various parameters of the mesoporous delivery system affect the state of the drug inside the pores and its release in vitro and in vivo.

Electrostatic interaction on loading of therapeutic peptide GLP-1 into porous silicon nanoparticles

Porous silicon (PSi) nanoparticles' tunable properties are facilitating their use at highly challenging medical tasks such as peptide delivery. Because of many different mechanisms that are affecting the interaction between the peptide and the particle, the drug incorporation into the mesoporous delivery system is not straightforward. We have studied the adsorption and loading of incretin hormone glucagon like peptide 1 (GLP-1) on PSi nanoparticles. The results show that the highest loading degree can be achieved in pH values near the isoelectric point of peptide, and the phenomenon is independent of the surface's zeta potential. In order to study the interaction between the peptide and the nanoparticle, we studied the adsorption with lower concentrations and noticed that also non-Coulombic forces have a big role in adsorption of GLP-1. Adsorption is effective and pH-independent especially on low peptide concentrations and onto more hydrophobic nanoparticles. Reversibility of adsorption was studied as a function of buffer pH. When the loading is compared to the total mass of the formulation, the loading degree is 29%, and during desorption experiments 25% is released in 4 h and can be considered as a reversible loading degree. Thus, the peptides adsorbed first seem to create irreversibly adsorbed layer that facilitates reversible adsorption of following peptides.

Functionalization of alkyne-terminated thermally hydrocarbonized porous silicon nanoparticles with targeting peptides and antifouling polymers: effect on the human plasma protein adsorption

Porous silicon (PSi) nanomaterials combine a high drug loading capacity and tunable surface chemistry with various surface modifications to meet the requirements for biomedical applications. In this work, alkyne-terminated thermally hydrocarbonized porous silicon (THCPSi) nanoparticles were fabricated and postmodified using five bioactive molecules (targeting peptides and antifouling polymers) via a single-step click chemistry to modulate the bioactivity of the THCPSi nanoparticles, such as enhancing the cellular uptake and reducing the plasma protein association. The size of the nanoparticles after modification was increased from 176 to 180-220 nm. Dextran 40 kDa modified THCPSi nanoparticles showed the highest stability in aqueous buffer. Both peptide- and polymer-functionalized THCPSi nanoparticles showed an extensive cellular uptake which was dependent on the functionalized moieties presented on the surface of the nanoparticles. The plasma protein adsorption study showed that the surface modification with different peptides or polymers induced different protein association profiles. Dextran 40 kDa functionalized THCPSi nanoparticles presented the least protein association. Overall, these results demonstrate that the "click" conjugation of the biomolecules onto the alkyne-terminated THCPSi nanoparticles is a versatile and simple approach to modulate the surface chemistry, which has high potential for biomedical applications.

Effective activation of halloysite nanotubes by piranha solution for amine modification via silane coupling chemistry

Piranha solution is shown to be an effective agent in activating the surface of HNTs for silanization modification.