CTAB/water/chloroform reverse micelles: a closed or open association model?

Synergy between surfactants' stiffness and concentration on their self-assembly into reverse micelles as water droplet carriers in nonpolar solvents

A study of the self-assembly process into reverse micelles (RMs) of linear surfactants and monomeric aqueous solutes dissolved in nonpolar solvents, varying the concentration (cs) and the persistence length (Lp) of the surfactants is presented here. The influence of cs and Lp on the structural and dynamic properties of the aggregates is investigated through mesoscopic simulations carried out with the dissipative particle dynamics method. All simulations are performed at a fixed water/surfactant molecular ratio of 2:1, varying the surfactant concentration from c = 6 wt% up to c = 12 wt%, for increasing surfactants' rigidity from Lp = 0.73 nm up to Lp = 44.99 nm. It is found that there exists a collaborative interplay between cs and Lp that enhances the number of RMs assembled and their diffusion as carriers of water droplets. These results should be useful as guidelines to understand and improve processes where the RMs are implemented to carry aqueous solutes in nonpolar solvents.

Product Metrics for the Manufacturability of Single-Crystal Gold Nanorods via Reaction Engineering

Colloidal gold nanorods (AuNRs) are integral to a diverse array of technologies, ranging from plasmonic imaging, therapeutics, and sensors to large-area coatings, catalysts, filters, and optical attenuators. Different lab-scale strategies are available to fabricate AuNRs with a broad range of physiochemical properties; however, this is achieved at the cost of synthetic robustness and scalability, which limit broad adoption in these technologies. To address this, Product Metrics (Structural Precision, Shape Yield, and Reagent Utilization), measurable with UV-vis-NIR spectroscopy, are defined to evaluate the efficiency of AuNR production. The dependency of these metrics on reaction formulation (reagent concentrations, pH, and T) is established and used to develop a two-step method based on optimizing symmetry breaking of seed particles, followed by the controlled extension of AuNR length and volume. Reagent concentrations and their relative molar ratios with respect to HAuCl4 are adjusted for each step to optimize these adversarial processes. Based on these correlations, we successfully demonstrate the production of highly concentrated AuNRs with targeted volume and aspect ratio while reducing particle impurities and shape dispersity to less than 4 and 10%, respectively, by employing a rationalized formulation that maximizes both product quality and Reagent Utilization. This results in a product density of 1.6 mg/mL, which is 20 times higher than that of conventional literature methods, with commensurate reduction in environmental waste products.

Sulfated Well-Defined Mesoporous Nanostructured Zirconia for Levulinic Acid Esterification

Well-organized zirconia (ZrO₂) nanoparticles forming mesoporous materials have been successfully synthesized via a facile micelle-templating method using cetyltrimethylammonium bromide as a structure-directing template to control the nucleation/growth process and porosity. The systematic use of such a surfactant in combination with a microwave-assisted solvothermal (cyclohexane/water) reaction enabled the control of pore size in a narrow-size distribution range (3-17 nm). The effect of solvent mixture ratio on the porosity of the synthesized oxide was determined, and the controlled growth of zirconia nanoparticles was confirmed by means of powder X-ray diffraction, small-angle X-ray scattering, transmission electron microscopy, selected area electron diffraction, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, thermogravimetric analysis, and Fourier transform infrared spectroscopy as well as N₂ physisorption isotherm analysis. Then, the as-prepared nanostructured zirconia oxides were treated with sulfuric acid to have sulfated samples. The catalytic performances of these mesoporous zirconia nanoparticles and their sulfated samples were tested for levulinic acid (LA) esterification by ethanol, with quantitative conversions of LA to ethyl levulinate after 8 h of reaction.

Hydration of bromide at reverse micelle interfaces studied by X-ray absorption fine structure

Nanoconfined water exhibits various interesting properties, which are not only of fundamental importance but also of practical use. Because reverse micelles (RMs) provide versatile ways to prepare nanoconfined water, the understanding of their physicochemical properties is essential for developing efficient applications. Although the water properties in the RMs could be affected by its interaction with the RM interface, the details have not been well understood. This study focuses on the local structures of Br^- in hexadecyltrimethylammonium bromide (HTAB) RMs formed in chloroform and 10% hexanol/heptane. The dependence in Br^- hydration on the molar ratio of water to HTAB (w) is investigated using X-ray absorption fine structure (XAFS). These systems cover a wide range of w values (0-30) and allow us to study the impact of this parameter on the local structure of Br^- at the RM interface, which comprises water, surfactant headgroups, and organic solvent components. The presence of multiple scattering paths complicates the XAFS spectra and makes it difficult to analyze them using standard fitting methods. The linear combination of the spectra corresponding to the individual scattering paths captures the molecular processes that occur at the RM interface upon increasing w. The maximum hydration number of Br^- is found to be 4.5 at w > 15, suggesting that although most of the ions remain at the interface as partly hydrated ions, some of them dissociate as completely hydrated ones.

Versatility of Reverse Micelles: From Biomimetic Models to Nano (Bio)Sensor Design

This paper presents an overview of the principal structural and dynamics characteristics of reverse micelles (RMs) in order to highlight their structural flexibility and versatility, along with the possibility to modulate their parameters in a controlled manner. The multifunctionality in a large range of different scientific fields is exemplified in two distinct directions: a theoretical model for mimicry of the biological microenvironment and practical application in the field of nanotechnology and nano-based sensors. RMs represent a convenient experimental approach that limits the drawbacks of the conventionally biological studies in vitro, while the particular structure confers them the status of simplified mimics of cells by reproducing a complex supramolecular organization in an artificial system. The biological relevance of RMs is discussed in some particular cases referring to confinement and a crowded environment, as well as the molecular dynamics of water and a cell membrane structure. The use of RMs in a range of applications seems to be more promising due to their structural and compositional flexibility, high efficiency, and selectivity. Advances in nanotechnology are based on developing new methods of nanomaterial synthesis and deposition. This review highlights the advantages of using RMs in the synthesis of nanoparticles with specific properties and in nano (bio)sensor design.

Simple and Rapid (Extraction) Protocol for NMR Metabolomics-Direct Measurement of Hydrophilic and Hydrophobic Metabolites Using Slice Selection

Investigating the metabolic profiles of solid sample materials with solution nuclear magnetic resonance (NMR) spectroscopy requires the extraction of these metabolites. This is commonly done by using two immiscible solvents such as water and chloroform for extraction. Subsequent solvent removal makes these extraction procedures very time-consuming. To shorten the preparation time of the NMR sample, the following protocol is proposed: the metabolites from a solid or liquid sample are extracted directly in the NMR tube, the NMR tube is centrifuged, and the metabolite profiles in the aqueous and organic phases are determined by using slice-selective proton NMR experiments. This protocol was tested with 11 black teas and 11 green teas, which can be easily distinguished by their metabolic profiles in the aqueous phase. As a test case for liquid samples, 29 milk samples were investigated. The geographical origin of the diaries where the milk was processed could not be determined unequivocally from the metabolic profiles of the hydrophilic metabolites; however, this was easily seen in the lipid profiles. As shown for the different test samples, the extraction protocol in combination with slice-selection NMR experiments is suitable for metabolic investigations. Because samples are rapidly processed, this approach can be used to explore different extraction strategies for metabolite isolation.

Slow Proton Transfer in Nanoconfined Water

The transport of protons in nanoconfined environments, such as in nanochannels of biological or artificial proton conductive membranes, is essential to chemistry, biology, and nanotechnology. In water, proton diffusion occurs by hopping of protons between water molecules. This process involves the rearrangement of many hydrogen bonds and as such can be strongly affected by nanoconfinement. We study the vibrational and structural dynamics of hydrated protons in water nanodroplets stabilized by a cationic surfactant using polarization-resolved femtosecond infrared transient absorption spectroscopy. We determine the time scale of proton hopping in the center of the water nanodroplets from the dynamics of the anisotropy of the transient absorption signals. We find that in small nanodroplets with a diameter <4 nm, proton hopping is more than 10 times slower than in bulk water. Even in relatively large nanodroplets with a diameter of ∼7 nm, we find that the rate of proton hopping is slowed by ∼4 times compared with bulk water.

Mechanism for Transition of Reverse Cylindrical Micelles to Spherical Micelles Induced by Diverse Alcohols

Herein, the effects of various alcohols on lecithin/CaCl₂ organogels are investigated. Mixtures of lecithin and CaCl₂ form reverse cylindrical micelles, resulting in optically transparent organogels. The addition of various alcohols to a mixture of lecithin and CaCl₂ induces a decrease in viscosity through which reverse cylindrical micelles are transformed into spherical micelles (or short cylindrical micelles). Long-hydrocarbon-chain alcohols decrease the viscosity of lecithin/CaCl₂ mixtures more efficiently. Hydrogen bonding and hydrocarbon chain interactions between lecithin and alcohol play important roles in the morphological transition. More importantly, isothermal titration calorimetry was conducted to obtain thermodynamic variables such as the enthalpy, equilibrium constant, Gibbs free energy, entropy, and stoichiometry of the associated molecules observed in the transition. It was found that the transition is an entropically driven process, in which the endothermic and exothermic behaviors were observed depending on the hydrocarbon chain length in the alcohol. In addition, the enthalpy for the association of the alcohol with lecithin showed a linear relationship depending on the hydrocarbon chain length, in which the magnitude of hydrogen bonding and hydrocarbon chain interactions was obtained quantitatively. To the best of our knowledge, this is the first study reporting the thermodynamic properties of the morphological transition observed in a reverse self-assembly process.

Dynamic Equilibrium in the Cetyltrimethylammonium Bromide-Au Nanoparticle Bilayer, and the Consequent Impact on the Formation of the Nanoparticle Protein Corona

Nanoparticles in ionic solutions are usually surrounded by stabilizing molecules that avoid aggregation and determine their surface properties, which strongly influence their behavior. The present work aims to shed light on the static vs dynamic nature of the cetyltrimethylammonium bromide (CTAB) bilayer on gold nanoparticles and to understand its effects on nanoparticle evolution in biological systems. A systematic study of the CTAB bilayer of Au nanorods and nanospheres was carried out, exploring the role of excess free surfactant in solution on the surface properties of nanoparticles and their colloidal stability. The results indicated the presence of a CTAB bilayer in which the external layer was in rapid dynamic equilibrium with the free surfactant in solution. The internal surfactant layer of the gold nanospheres was also found to be in dynamic equilibrium. Conversely, the gold nanorods had a permanent internal layer. Consequently, the CTAB-nanoparticle dispersions always contained free CTAB in excess to maintain the colloidal stability of the NPs. In contrast, decreasing the free CTAB concentration resulted in nanoparticle aggregation. The impact of the dynamic equilibrium on the exposure of particles to biological fluids and on the formation of the nanoparticle protein corona was studied, revealing the different fates of the nanoparticles, which depended on the amount of free CTAB in solution.

Aggregation response of triglyceride hydrolysis products in cyclohexane and triolein

Aggregation mechanism and the existence of cmc depend on apolar solvent quality and surfactant head group polarity.

Photoswitching of Azobenzene-Based Reverse Micelles above and at Subzero Temperatures As Studied by NMR and Molecular Dynamics Simulations

We designed and studied the structure, dynamics, and photochemistry of photoswitchable reverse micelles (RMs) composed of azobenzene-containing ammonium amphiphile 1 and water in chloroform at room and subzero temperatures by NMR spectroscopy and molecular dynamics simulations. The NMR and diffusion coefficient analyses showed that micelles containing either the E or Z configuration of 1 are stable at room temperature. Depending on the water-to-surfactant molar ratio, the size of the RMs remains unchanged or is slightly reduced because of the partial loss of water from the micellar cores upon extensive E → Z or Z → E photoisomerization of the azobenzene group in 1. Upon freezing at 253 or 233 K, E-1 RMs partially precipitate from the solution but are redissolved upon warming whereas Z-1 RMs remain fully dissolved at all temperatures. Light-induced isomerization of 1 at low temperatures does not lead to the disintegration of RMs remaining in the solution; however, its scope is influenced by a precipitation process. To obtain a deeper molecular view of RMs, their structure was characterized by MD simulations. It is shown that RMs allow for amphiphile isomerization without causing any immediate significant structural changes in the micelles.

Hydrotrope induced structural modifications in CTAB/butanol/water/isooctane reverse micellar systems

SAXS and NMR studies to gain insight of structural alterations in reverse micellar nanotemplates in presence of hydrotropes.

Further Insight into the Definite Morphology and Formation Mechanism of Mesoporous Silica KCC-1

The unique three-dimensional pore structure of KCC-1 has attracted significant attention and has proven to be different compared to other conventional mesoporous silica such as the MCM-41 family, SBA-15, or even MSN nanoparticles. In this research, we carefully examine the morphology of KCC-1 to define more appropriate nomenclature. We also propose a formation mechanism of KCC-1 based on our experimental evidence. Herein, the KCC-1 morphology was interpreted mainly on the basis of compiling all observation and information taken from SEM and TEM images. Further analysis on TEM images was carried out. The gray value intensity profile was derived from TEM images in order to determine the specific pattern of this unique morphology that is found to be clearly different from that of other types of porous spherical-like morphologies. On the basis of these results, the KCC-1 morphology would be more appropriately reclassified as bicontinuous concentric lamellar morphology. Some physical characteristics such as the origin of emulsion, electrical conductivity, and the local structure of water molecules in the KCC-1 emulsion were disclosed to reveal the formation mechanism of KCC-1. The origin of the KCC-1 emulsion was characterized by the observation of the Tyndall effect, conductometry to determine the critical micelle concentration, and Raman spectroscopy. In addition, the morphological evolution study during KCC-1 synthesis completes the portrait of the formation of mesoporous silica KCC-1.

Morphological Evolution of Noble Metal Nanoparticles in Chloroform: Mechanism of Switching on/off by Protic Species

The morphological stability/morphological reshaping of noble metal nanoparticles are studied experimentally in order to unravel the chemical mechanisms lying beneath. Gold and silver nanoparticles (AuNPs and AgNPs, respectively) formed in chloroformic environment are used, as model synthetic systems, to study phenomena of morphological change. The morphological evolution of NPs that follows their formation, is characterized by spectroscopy (UV-Visible, Raman and FTIR) and TEM (Transmission Electron Microscopy). The change of NP morphology involves the increase of the average NP size and the broadening of size distribution, in a close resemblance with the effect characteristically obtained from the Ostwald ripening. The effect of the poor solvating properties of chloroform in stabilizing small charged species (H⁺, Ag⁺, Au⁺) as well as the principle of electroneutrality of matter are analyzed in order to formulate a feasible reaction scheme consisting of a three-step processes: the generation of soluble intermediary species by corrosion of nanoparticles, the diffusion of intermediary species from one nanoparticle to another, and the re-deposition process involving the reduction of intermediary species. This basic reaction scheme is used as hypothesis to plan and perform experiments, which reveal that molecular oxygen dissolved in the dispersive medium can drive NP corrosion, however, protic species are also required as co-reactant. The polarity of the hydrogen bond and the ligand properties of the anions produced by deprotonation are feature of the protic species that enable/disable the corrosion and, in turn, the NP morphological evolution.

Polar Solvents Trigger Formation of Reverse Micelles

We use molecular dynamics simulations and molecular thermodynamics to investigate the formation of reverse micelles in a system of surfactants and nonpolar solvents. Since the early observation of reverse micelles, the question has been whether the existence of polar solvent molecules such as water is the driving force for the formation of reverse micelles in nonpolar solvents. In this work, we use a simple coarse-grained model of surfactants and solvents to show that a small number of polar solvent molecules triggers the formation of large permanent aggregates. In the absence of polar molecules, both the thermodynamic model and molecular simulations show that small aggregates are more populated in the solution and larger ones are less frequent as the system evolves over time. The size and shape of reverse micelles depend on the size of the polar core: the shape is spherical for a large core and ellipsoidal for a smaller one. Using the coarse-grained model, we also investigate the effect of temperature and surfactant tail length. Our results reveal that the number of surfactant molecules in the micelle decreases as the temperature increases, but the average diameter does not change because the size of the polar core remains invariant. A reverse micelle with small polar core attracts fewer surfactants when the tail is long. The uptake of solvent particles by a micelle of longer surfactant tail is less than shorter ones when the polar solvent particles are initially distributed randomly.

Molecular dynamics simulation of water/BHDC cationic reverse micelles. structural characterization, dynamical properties, and influence of solvent on intermicellar interactions

We report results obtained from molecular dynamics (MD) experiments of benzylhexadecyldimethylammonium chloride (BHDC) cationic reverse micelles (RMs). In particular we analyzed equilibrium and dynamical characteristics of water/BHDC RMs in pure benzene, at two different water/BHDC ratios (W0 = 5 and W0 = 10). The RMs appear as elliptical aggregates with eccentricities close to ∼0.9. Analysis of the different spatial correlations reveals three different spatial domains in the RMs: a water inner pool, the surfactant interface, and the external solvent. The calculated accessible surface areas for the aqueous inner cores suggest a strong penetration of solvent molecules within the micellar interface domains. Comparison between the density profiles of both RMs shows an increment of the broadness in the distributions of all species at the interface, along with an increasing overlap between the tail segments of the surfactant and benzene molecules as one considers larger micelles. For the dynamical side, the rotational characteristic time scale for the confined water was found to be 1 order of magnitude larger than that of the bulk water. A similar effect was also observed for hydrogen bond dynamics. Both retardation effects diminish with the size of the aggregate. To the estimate the influence of the external solvent on the intermicellar interactions, free energy profiles for the coalescence process between RMs of similar size in pure benzene and in a n-heptane/benzene mixture were also investigated. The results indicate that the association process is facilitated by the presence of n-heptane in the external nonpolar phase. Comparison with previous theoretical and experimental results is also carried out.

A novel, rapid and automated conductometric method to evaluate surfactant-cells interactions by means of critical micellar concentration analysis

Conductometry is widely used to determine critical micellar concentration and micellar aggregates surface properties of amphiphiles. Current conductivity experiments of surfactant solutions are typically carried out by manual pipetting, yielding some tens reading points within a couple of hours. In order to study the properties of surfactant-cells interactions, each amphiphile must be tested in different conditions against several types of cells. This calls for complex experimental designs making the application of current methods seriously time consuming, especially because long experiments risk to determine alterations of cells, independently of the surfactant action. In this paper we present a novel, accurate and rapid automated procedure to obtain conductometric curves with several hundreds reading points within tens of minutes. The method was validated with surfactant solutions alone and in combination with Saccharomyces cerevisiae cells. An easy-to use R script, calculates conductometric parameters and their statistical significance with a graphic interface to visualize data and results. The validations showed that indeed the procedure works in the same manner with surfactant alone or in combination with cells, yielding around 1000 reading points within 20 min and with high accuracy, as determined by the regression analysis.