Injectable and thermoresponsive self-assembled nanocomposite hydrogel for long-term anticancer drug delivery

Surface functionalized nanomaterial systems for targeted therapy of endocrine related tumors: a review of recent advancements

The application of multidisciplinary techniques in the management of endocrine-related cancers is crucial for harnessing the advantages of multiple disciplines and their coordinated efforts in eliminating tumors. Due to the malignant characteristics of cancer cells, they possess the capacity to develop resistance to traditional treatments such as chemotherapy and radiotherapy. Nevertheless, despite diligent endeavors to enhance the prediction of outcomes, the overall survival rate for individuals afflicted with endocrine-related malignancy remains quite miserable. Hence, it is imperative to investigate innovative therapy strategies. The latest advancements in therapeutic tactics have offered novel approaches for the therapy of various endocrine tumors. This paper examines the advancements in nano-drug delivery techniques and the utilization of nanomaterials for precise cancer cures through targeted therapy. This review provides a thorough analysis of the potential of combined drug delivery strategies in the treatment of thyroid cancer, adrenal gland tumors, and pancreatic cancer. The objective of this study is to gain a deeper understanding of current therapeutic approaches, stimulate the development of new drug DDS, and improve the effectiveness of treatment for patients with these diseases. The intracellular uptake of pharmaceuticals into cancer cells can be significantly improved through the implantation of synthetic or natural substances into nanoparticles, resulting in a substantial reduction in the development of endocrine malignancies.

Injectable long-acting formulations (ILAFs) and manufacturing techniques

INTRODUCTION

Most therapeutics delivered using short-acting formulations need repeated administration, which can harm patient compliance and raise failure risks related to inconsistent treatment. Injectable long-acting formulations (ILAFs) are controlled/sustained-release formulations fabricated to deliver active pharmaceutical ingredients (APIs) and extend their half-life over days to months. Longer half-lives of ILAFs minimize the necessity for frequent doses, increase patient compliance, and reduce the risk of side effects from intravenous (IV) infusions. Using ILAF technologies, the immediate drug release can also be controlled, thereby minimizing potential adverse effects due to high initial drug blood concentrations.

AREA COVERED

In this review, we have discussed various ILAFs, their physiochemical properties, fabrication technologies, advantages, and practical issues, as well as address some major challenges in their application. Especially, the approved ILAFs are highlighted.

EXPERT OPINION

ILAFs are sustained-release formulations with extended activity, which can improve patient compliance. ILAFs are designed to deliver APIs like proteins and peptides and extend their half-life over days to months. The specific properties of each ILAF preparation, such as extended-release and improved drug targeting capabilities, make them an effective approach for precise and focused therapy. Furthermore, this is especially helpful for biopharmaceuticals with short biological half-lives and low stability since most environmental conditions can protect them from sustained-release delivery methods.

Exploring the Progress of Hyaluronic Acid Hydrogels: Synthesis, Characteristics, and Wide-Ranging Applications

This comprehensive review delves into the world of hyaluronic acid (HA) hydrogels, exploring their creation, characteristics, research methodologies, and uses. HA hydrogels stand out among natural polysaccharides due to their distinct features. Their exceptional biocompatibility makes them a top choice for diverse biomedical purposes, with a great ability to coexist harmoniously with living cells and tissues. Furthermore, their biodegradability permits their gradual breakdown by bodily enzymes, enabling the creation of temporary frameworks for tissue engineering endeavors. Additionally, since HA is a vital component of the extracellular matrix (ECM) in numerous tissues, HA hydrogels can replicate the ECM's structure and functions. This mimicry is pivotal in tissue engineering applications by providing an ideal setting for cellular growth and maturation. Various cross-linking techniques like chemical, physical, enzymatic, and hybrid methods impact the mechanical strength, swelling capacity, and degradation speed of the hydrogels. Assessment tools such as rheological analysis, electron microscopy, spectroscopy, swelling tests, and degradation studies are employed to examine their attributes. HA-based hydrogels feature prominently in tissue engineering, drug distribution, wound recovery, ophthalmology, and cartilage mending. Crafting HA hydrogels enables the production of biomaterials with sought-after qualities, offering avenues for advancements in the realm of biomedicine.

Development of a thermosensitive hydrogel based on Polaxamer 407 and gellan gum with inclusion complexes (Sulfobutylated-β-cyclodextrin-Farnesol) as a local drug delivery system

This work proposes the development of a thermosensitive local drug release system based on Polaxamer 407, also known as Pluronic® F-127 (PF-127), Gellan Gum (GG) and the inclusion complex Sulfobutylated-β-cyclodextrin (CD) with Farnesol (FOH). Rheological properties of the hydrogels and their degradation were studied. According to the rheological results, a solution of 20% w/v of PF-127 forms a strong gel with a gelling temperature of about 25 °C (storage modulus of 15,000 Pa). The addition of the GG increased the storage modulus (optimal concentration of 0.5 % w/v) twofold without modifying the gelling temperature. Moreover, including 0.5% w/v of GG also increased 6 times the degradation time of the hydrogel. Regarding the inclusion complex, the addition of free CD decreased the viscosity and the gel strength since polymer chains were included in CD cavity without affecting the gelling temperature. Contrarily, the inclusion complex CD-FOH did not significantly modify any property of the formulation because the FOH was hosted in the CD. Furthermore, a mathematical model was developed to adjust the degradation time. This model highlights that the addition of the GG decreases the number of released chains from the polymeric network (which coincides with an increase in the storage modulus) and that the free CD reduces the degradation rate, protecting the polymeric chains. Finally, FOH release was quantified with a specific device, that was designed and printed for this type of system, observing a sustainable drug release (similar to FOH aqueous solubility, 8 μM) dependent on polymer degradation.

Injectable Poloxamer Hydrogels for Local Cancer Therapy

The widespread push to invest in local cancer therapies comes from the need to overcome the limitations of systemic treatment options. In contrast to intravenous administration, local treatments using intratumoral or peritumoral injections are independent of tumor vasculature and allow high concentrations of therapeutic agents to reach the tumor site with minimal systemic toxicity. Injectable biodegradable hydrogels offer a clear advantage over other delivery systems because the former requires no surgical procedures and promotes drug retention at the tumor site. More precisely, in situ gelling systems based on poloxamers have garnered considerable attention due to their thermoresponsive behavior, biocompatibility, ease of preparation, and possible incorporation of different anticancer agents. Therefore, this review focuses on the use of injectable thermoresponsive hydrogels based on poloxamers and their physicochemical and biological characterization. It also includes a summary of these hydrogel applications in local cancer therapies using chemotherapy, phototherapy, immunotherapy, and gene therapy.

Hepar-on-a-sensor-platform with hybridization chain reaction amplification strategy to intuitively monitor the hepatoxicity of natural compounds

The irrational use of natural compounds in the treatment of diseases can lead to serious side effects, especially hepatoxicity, and its toxic effects are usually cumulative and imperceptible. Therefore, an accurate sensing platform is urgently needed to monitor the hepatotoxicity of natural compounds. Here, we deposited a thermo-responsive alginate-RGD/Pluronic hydrogel to construct an in vitro three-dimensional(3D) hepar-platform, and a thorough validation was adopted to evaluate the bioprinted hepatic constructs. The engineered hepar-platform was then employed to access its biological response toward Emodin (EM) and Triptolide (TP), two typical hepatotoxic natural compounds. Subsequently, we integrated it with a robust fluorescent sensor based on hybridization chain reaction amplification strategy (HCR) to monitor the early hepatotoxic biomarker - glutathione-S-transferase-alpha (GST-α) secreted by this 3D constructs. Our study was the first attempt to construct an accurate hepar-on-a-sensor platform that could effectively detect GST-α for monitoring the hepatoxic effects of natural compounds. The limit of detection of the platform was 0.3 ng ml^-1 and the accuracy of this platform was verified by enzyme linked immunosorbent assay. Furthermore, the variation of GST-α induced by EM and TP was consistent with hepatotoxicity studies, thus providing an important application value for evaluating the hepatotoxicity of natural compounds. STATEMENT OF SIGNIFICANCE: 1. We deposited a thermo-responsive alginate-RGD/Pluronic hydrogel to construct an in vitro three-dimensional(3D) hepar-platform, and elucidated the essential reasons why hybrid bioinks more suitable for 3D extrusion from biomaterials itself. Also, a thorough validation associated with a series of important proteins and genes involved in liver cell metabolism was adopted to evaluate the bioprinted hepatic constructs accurately 2. Glutathione-S-transferase-alpha is a soluble trace biomarker for acute hepatotoxic injury, the hepatotoxic effects of natural compounds on the secretion of GST-α has not been reported to date. We integrated our 3D hepar-platform with recognition molecules-aptamers and HCR amplification strategy to monitor the variation of GST-α, aiming at developing a robust and stable fluorescent biosensing platform to monitor the hepatoxicity of natural compounds.

Smart stimuli-responsive injectable gels and hydrogels for drug delivery and tissue engineering applications: A review

Hydrogels are widely used biomaterials in the delivery of therapeutic agents, including drugs, genes, proteins, etc., as well as tissue engineering, due to obvious properties such as biocompatibility and their similarity to natural body tissues. Some of these substances have the feature of injectability, which means that the substance is injected into the desired place in the solution state and then turns into the gel, which makes it possible to administer them from a way with a minimal amount of invasion and eliminate the need for surgery to implant pre-formed materials. Gelation can be caused by a stimulus and/or spontaneously. Suppose this induces due to the effect of one or many stimuli. In that case, the material in question is called stimuli-responsive because it responds to the surrounding conditions. In this context, we introduce the different stimuli that cause gelation and investigate the different mechanisms of the transformation of the solution into the gel in them. Also, we study special structures, such as nano gels or nanocomposite gels.

Lyotropic liquid crystals for parenteral drug delivery

The necessity for long-term treatments of chronic diseases has encouraged the development of novel long-acting parenteral formulations intending to improve drug pharmacokinetics and therapeutic efficacy. Lately, one of the novel approaches has been developed based on lipid-based liquid crystals. The lyotropic liquid crystal (LLC) systems consist of amphiphilic molecules and are formed in presence of solvents with the most common types being cubic, hexagonal and lamellar mesophases. LC injectables have been recently developed based on polar lipids that spontaneously form liquid crystal nanoparticles in aqueous tissue environments to create the in-situ long-acting sustained-release depot to provide treatment efficacy over extended periods. In this manuscript, we have consolidated and summarized the various type of liquid crystals, recent formulation advancements, analytical evaluation, and therapeutic application of lyotropic liquid crystals in the field of parenteral sustained release drug delivery.

Fast-Forming Dissolvable Redox-Responsive Hydrogels: Exploiting the Orthogonality of Thiol-Maleimide and Thiol-Disulfide Exchange Chemistry

Fast-forming yet easily dissolvable hydrogels (HGs) have potential applications in wound healing, burn incidences, and delivery of therapeutic agents. Herein, a combination of a thiol–maleimide conjugation and thiol–disulfide exchange reaction is employed to fabricate fast-forming HGs which rapidly dissolve upon exposure to dithiothreitol (DTT), a nontoxic thiol-containing hydrophilic molecule. In particular, maleimide disulfide-terminated telechelic linear poly(ethylene glycol) (PEG) polymer and PEG-based tetrathiol macromonomers are employed as gel precursors, which upon mixing yield HGs within a minute. The selectivity of the thiol–maleimide conjugation in the presence of a disulfide linkage was established through ¹H NMR spectroscopy and Ellman’s test. Rapid degradation of HGs in the presence of thiol-containing solution was evident from the reduction in storage modulus. HGs encapsulated with fluorescent dye-labeled dextran polymers and bovine serum albumin were fabricated, and their cargo release was investigated under passive and active conditions upon exposure to DTT. One can envision that the rapid gelation and fast on-demand dissolution under relatively benign conditions would make these polymeric materials attractive for a range of biomedical applications.

Hybrid in situ- forming injectable hydrogels for local cancer therapy

Injectable in situ forming hydrogels are amongst the efficient local drug delivery systems for cancer therapy. Providing a 3D hydrogel network within the target tissue capable of sustained release of the chemotherapeutics made them attractive candidates for increasing the therapeutic index. Remarkable swelling properties, mechanical strength, biocompatibility, wide composition variety and tunable polymeric moieties have led to preparation of injectable hydrogels which also could be used as cavity adaptive chemotherapeutic-loaded implants to prevent post -surgical cancer recurrence. Implementation of various polymers, nanoparticles, peptide and proteins and different crosslinking chemistry facilitated the fabrication of hybrid hydrogels with favorable characteristics such as stimuli sensitive platforms or multifunctional systems. In the current review, we focused on design and fabrication strategies of injectable in situ forming hydrogels and summarized recent hybrid hydrogels used for local cancer therapy.

Injectable nanocomposite hydrogels as an emerging platform for biomedical applications: A review

Hydrogels have attracted much attention for biomedical and pharmaceutical applications due to the similarity of their biomimetic structure to the extracellular matrix of natural living tissues, tunable soft porous microarchitecture, superb biomechanical properties, proper biocompatibility, etc. Injectable hydrogels are an exciting type of hydrogels that can be easily injected into the target sites using needles or catheters in a minimally invasive manner. The more comfortable use, less pain, faster recovery period, lower costs, and fewer side effects make injectable hydrogels more attractive to both patients and clinicians in comparison to non-injectable hydrogels. However, it is difficult to achieve an ideal injectable hydrogel using just a single material (i.e., polymer). This challenge can be overcome by incorporating nanofillers into the polymeric matrix to engineer injectable nanocomposite hydrogels with combined or synergistic properties gained from the constituents. This work aims to critically review injectable nanocomposite hydrogels, their preparation methods, properties, functionalities, and versatile biomedical and pharmaceutical applications such as tissue engineering, drug delivery, and cancer labeling and therapy. The most common natural and synthetic polymers as matrices together with the most popular nanomaterials as reinforcements, including nanoceramics, carbon-based nanostructures, metallic nanomaterials, and various nanosized polymeric materials, are highlighted in this review.

In Situ Nanotransformable Hydrogel for Chemo-Photothermal Therapy of Localized Tumors and Targeted Therapy of Highly Metastatic Tumors

Metastasis is one of the predisposing factors for cancer-related mortalities worldwide. Patients with advanced cancers (stage IV) receive palliative care with minimal possibility of achieving complete remission. Antibody-based therapeutic modalities are capable of targeting tumors that are confined to a particular location but are ineffective in targeting distant secondary tumors. In the current study, we have developed a smart nano-transforming hydrogel (NTG) that transforms in situ to polymeric nanoparticles (PA NPs) of 100-150 nm when injected subcutaneously. These nanoparticles targeted the primary and secondary metastatic tumors for up to ∼5 and ∼3 days, respectively. The in situ-formed PA NPs also demonstrated a pH-responsive drug release resulting in about ∼80% release within 100 h at 5.8 pH. When tested in vivo, substantial inhibition of lung metastases was observed compared to chemotherapy, thus demonstrating the efficiency of nanotransforming hydrogels in targeting and inhibiting primary and secondary metastatic tumors.

Simple Formation of Cancer Drug-Containing Self-Assembled Hydrogels with Temperature and pH-Responsive Release

The purpose of a drug delivery system is to efficiently deliver drugs to a desired target, while simultaneously reducing the side effects caused by these drugs and maximizing their efficacy. However, in the manufacture of a drug delivery system, it is difficult to control the amount of drug encapsulation. In this study, we developed a simple formation process of self-assembled hydrogels that made it easier to package the desired amount of anticancer drugs. A self-assembled hydrogel was prepared by simply mixing transferrin, dithiothreitol, and an anticancer drug in a salt solvent. The structural conditions of the hydrogel were determined in order to control the concentration of the transferrin protein, dithiothreitol, and salt in the solvent. The self-assembled hydrogels contained the desired amount of anticancer drugs. With this system, changes in pH and temperature control the release rate and the release ratio of anticancer drugs. The cytotoxicity of the drug-loaded hydrogel was evaluated, which showed that 80% of the treated cells had been killed following 48 h of incubation.

Hyaluronic Acid-Functionalized Nanomicelles Enhance SAHA Efficacy in 3D Endometrial Cancer Models

Simple Summary

One of the major limitations to cancer therapies are the side effects caused by the drug interacting with any tissue in the body. There is often a balance between patient health and effectively treating the disease. To by-pass this balancing act nanoparticles are being used to deliver therapeutics straight to the tumors, acting as “Trojan Horses”. Endometrial cancers are known to have more of the cell surface protein CD44 than healthy tissues. Here, to efficiently target endometrial cancer, hyaluronic acid, which naturally binds to the CD44 protein was attached to the surface of nanoparticles and tested on microtissues or spheroids to better model a tumor and understand drug delivery performance. We show that our hyaluronic acid-nanoparticle formulations improve drug effects and interact with the cancer cells more than without this targeting agent.

Abstract

Histone Deacetylase (HDAC) enzymes are upregulated in cancer leading to the development of HDAC inhibiting compounds, several of which are currently in clinical trials. Side effects associated with toxicity and non-specific targeting indicate the need for efficient drug delivery approaches and tumor specific targeting to enhance HDAC efficacy in solid tumor cancers. SAHA encapsulation within F127 micelles functionalized with a surface hyaluronic acid moiety, was developed to target endometrial cancer cells expressing elevated levels of CD44. In vitro viability and morphology analyses was conducted in both 2D and 3D models to assess the translational potential of this approach. Encapsulation enhanced SAHA delivery and activity, demonstrating increased cytotoxic efficacy in 2D and 3D endometrial cancer models. High-content imaging showed improved nanoparticle internalization in 2D and CD44 enhanced penetration in 3D models. In addition, the nano-delivery system enhanced spheroid penetration resulting in cell growth suppression, p21 associated cell cycle arrest, as well as overcoming the formation of an EMT associated phenotype observed in free drug treated type II endometrial cancer cells. This study demonstrates that targeted nanoparticle delivery of SAHA could provide the basis for improving its efficacy in endometrial cancer. Using 3D models for endometrial cancer allows the elucidation of nanoparticle performance and CD44 targeting, likely through penetration and retention within the tumor model.

Thermoresponsive liquid crystalline formulation of Exemestane: Design and structural characterization

Exemestane (EXE), a drug used for the treatment of breast cancer, has limited aqueous solubility of 0.08 mg/mL and log P∼ 4.22. The only available marketed formulation in form of tablets possess limitations of poor oral absorption (∼ 42 %), low solubility, extensive hepatic metabolism and numerous adverse effects due to its peripheral absorption. In order to address these issues, an alternative route of topical application is attempted through a lamellar liquid crystal based formulation. Pluronic® was used as stabilizer due to its higher surface activity and gelling properties. The solubility enhancement of EXE was achieved using liquid crystal formulation. We have investigated the effect of concentration of oil, S_mix (surfactant - cosurfactant mixture) and EXE on lattice parameter, rheology and drug release for various combinations of the formulation. The small angle x-ray scattering (SAXS) measurement demonstrated an evidence of a lamellar structure with lattice parameter ∼15 nm, which increases with corresponding increase in oil and EXE due to increase in hydrophobic interactions leading to an expansion of lamella. The inter lamellar distance decreases at higher surfactant concentration, due to the distribution of the same amount of oil and drug within larger concentration of surfactant molecules. The rheology measurement exhibited gel like properties at low shear rate indicating soft gel formation, which converts to Newtonian type flowing liquid at higher shear rate. At constant S_mix with increasing oil content, the viscosity decreases, which is attributed to the dilution of the lamellar structures with oil. The temperature sweep rheology reveals a change in the viscosity near physiological temperature, which may be attributed to the structural transition of lamellae. The formulation remains gel like at room temperature, which aids in proper application to skin and converts it to free flowing liquid above 37 °C. The invitro drug release of optimized formulation for 24 h was ∼ 38 % at 37 °C, which increased to 50 % at 42 °C. Accordingly, this formulation containing thermoresponsive lamellar liquid crystal gels of EXE represents a viable option for hyperthermia induced enhanced drug release. The characteristic and advantageous features offered by this formulation includes improved bioavailability of EXE due to enhanced solubility, permeability and absorption.

Glycosaminoglycans: Carriers and Targets for Tailored Anti-Cancer Therapy

The tumor microenvironment (TME) is composed of cancerous, non-cancerous, stromal, and immune cells that are surrounded by the components of the extracellular matrix (ECM). Glycosaminoglycans (GAGs), natural biomacromolecules, essential ECM, and cell membrane components are extensively altered in cancer tissues. During disease progression, the GAG fine structure changes in a manner associated with disease evolution. Thus, changes in the GAG sulfation pattern are immediately correlated to malignant transformation. Their molecular weight, distribution, composition, and fine modifications, including sulfation, exhibit distinct alterations during cancer development. GAGs and GAG-based molecules, due to their unique properties, are suggested as promising effectors for anticancer therapy. Considering their participation in tumorigenesis, their utilization in drug development has been the focus of both industry and academic research efforts. These efforts have been developing in two main directions; (i) utilizing GAGs as targets of therapeutic strategies and (ii) employing GAGs specificity and excellent physicochemical properties for targeted delivery of cancer therapeutics. This review will comprehensively discuss recent developments and the broad potential of GAG utilization for cancer therapy.

Salinomycin-loaded injectable thermosensitive hydrogels for glioblastoma therapy

Local drug delivery approaches for treating brain tumors not only diminish the toxicity of systemic chemotherapy, but also circumvent the blood-brain barrier (BBB) which restricts the passage of most chemotherapeutics to the brain. Recently, salinomycin has attracted much attention as a potential chemotherapeutic agent in a variety of cancers. In this study, poly (ethylene oxide)/poly (propylene oxide)/poly (ethylene oxide) (PEO-PPO-PEO, Pluronic F127) and poly (dl-lactide-co-glycolide-b-ethylene glycol-b-dl-lactide-co-glycolide) (PLGA-PEG-PLGA), the two most common thermosensitive copolymers, were utilized as local delivery systems for salinomycin in the treatment of glioblastoma. The Pluronic and PLGA-PEG-PLGA hydrogels released 100% and 36% of the encapsulated salinomycin over a one-week period, respectively. While both hydrogels were found to be effective at inhibiting glioblastoma cell proliferation, inducing apoptosis and generating intracellular reactive oxygen species, the Pluronic formulation showed better biocompatibility, a superior drug release profile and an ability to further enhance the cytotoxicity of salinomycin, compared to the PLGA-PEG-PLGA hydrogel formulation. Animal studies in subcutaneous U251 xenograftednudemice also revealed that Pluronic + salinomycin hydrogel reduced tumor growth compared to free salinomycin- and PBS-treated mice by 4-fold and 6-fold, respectively within 12 days. Therefore, it is envisaged that salinomycin-loaded Pluronic can be utilized as an injectable thermosensitive hydrogel platform for local treatment of glioblastoma, providing a sustained release of salinomycin at the tumor site and potentially bypassing the BBB for drug delivery to the brain.

A Fluorescence Study of the Interaction of Anticancer Drug Molecule Doxorubicin Hydrochloride in Pluronic P123 and F127 Micelles

Drug delivery systems for the sustained and target delivery of doxorubicin to tumor cells are a topic of interest due to the efficacy of the doxorubicin in cancer treatment. The use of polymers such as Pluronic is being studied widely for the formulation of doxorubicin hydrochloride. However, the basic understanding of the physicochemical properties of pluronic micelles in presence of doxorubicin hydrochloride is a very essential topic of study. Doxorubicin hydrochloride is fluorescent; this helped us to study its sensitivity towards the Pluronic microenvironment using the fluorescence technique. In this work, the interaction and place of location of doxorubicin hydrochloride in Pluronic F127 and P123 micelles has been studied extensively using steady-state fluorescence intensity, dynamic fluorescence lifetime, quenching studies, dynamic light scattering, and zeta potential measurements, at different Pluronic concentrations. Using a fluorescence quenching experiment, doxorubicin hydrochloride was found to reside near the hydrophilic PEO corona region of the Pluronic micelles. For both the Pluronic, in the concentration range of study, the micellar size was found to be below 30 nm; this may have a greater advantage for various applications.

Evaluation of the activity of a chemo-ablative, thermoresponsive hydrogel in a murine xenograft model of lung cancer

BACKGROUND

Minimally invasive intratumoural administration of thermoresponsive hydrogels, that transition from liquid to gel in response to temperature, has been proposed as a potential treatment modality for solid tumours. The aim of this study was to assess the inherent cytotoxicity of a poloxamer-based thermoresponsive hydrogel in a murine xenograft model of lung cancer.

METHODS

In vitro viability assessment was carried out in a lung cancer (A549) and non-cancerous (Balb/c 3T3 clone A31) cell line. Following intratumoural administration of saline or the thermoresponsive hydrogel to an A549 xenograft model in female Athymic Nude-Foxn1nu mice (n = 6/group), localisation was confirmed using IVIS imaging. Tumour volume was assessed using callipers measurements over 14 days. Blood serum was analysed for liver and kidney damage and ex vivo tissue samples were histologically assessed.

RESULTS

The thermoresponsive hydrogel demonstrated a dose-dependent cancer cell-specific toxicity in vitro and was retained in situ for at least 14 days in the xenograft model. Tumour volume increase was statistically significantly lower than saline treated control at day 14 (n = 6, p = 0.0001), with no associated damage of hepatic or renal tissue observed.

CONCLUSIONS

Presented is a poloxamer-based thermoresponsive hydrogel, suitable for intratumoural administration and retention, which has demonstrated preliminary evidence of local tumour control, with minimal off-site toxicity.

New Developments in Medical Applications of Hybrid Hydrogels Containing Natural Polymers

New trends in biomedical applications of the hybrid polymeric hydrogels, obtained by combining natural polymers with synthetic ones, have been reviewed. Homopolysaccharides, heteropolysaccharides, as well as polypeptides, proteins and nucleic acids, are presented from the point of view of their ability to form hydrogels with synthetic polymers, the preparation procedures for polymeric organic hybrid hydrogels, general physico-chemical properties and main biomedical applications (i.e., tissue engineering, wound dressing, drug delivery, etc.).

Preparation of a size selective nanocomposite through temperature assisted co-assembly of gelatin and pluronic F127 for passive targeting of doxorubicin

The study demonstrates the importance of the weight ratio of F127 and gelatin in forming size selective nanoconjugate through a thermal relaxation approach and its potential as an efficient drug delivery system of doxorubicin with reduced side effects.

Localized controlled release of bevacizumab and doxorubicin by thermo-sensitive hydrogel for normalization of tumor vasculature and to enhance the efficacy of chemotherapy

In a malignant tumor, overexpression of pro-angiogenic factors like vascular endothelial growth factor (VEGF) provokes the production of pathologic vascular networks characterized by leaky, chaotically organized, immature, thin-walled, and ill-perfused. As a result, hostile tumor environment would be developed and profoundly hinders anti-cancer drug activities and fuels tumor progression. In this study, we develop a strategy of sequential sustain release of anti-angiogenic drug, Bevacizumab (BVZ), and anti-cancer drug, Doxorubicin (DOX), using poly (d, l-Lactide)- Poly (ethylene glycol) -Poly (d, l-Lactide) (PDLLA-PEG-PDLLA) hydrogel as a local delivery system. The release profiles of the drugs from the hydrogel were investigated in vitro which confirmed that relatively rapid release of BVZ (73.56 ± 1.39%) followed by Dox (61.21 ± 0.62%) at pH 6.5 for prolonged period. The in vitro cytotoxicity test revealed that the copolymer exhibited negligible cytotoxicity up to 2.5 mg ml^-1 concentration on HaCaT and HeLa cells. Likeways, the in vitro degradation of the copolymer showed 41.63 ± 2.62% and 73.25 ± 4.36% weight loss within 6 weeks at pH 7.4 and 6.5, respectively. After a single intratumoral injection of the drug-encapsulated hydrogel on Hela xenograft nude, hydrogel co-loaded with BVZ and Dox displayed the highest tumor suppression efficacy for up to 36 days with no noticeable damage on vital organs. Therefore, localized co-delivery of anti-angiogenic drug and anti-cancer drug by hydrogel system may be a promising approach for enhanced chemotherapeutic efficacy in cancer treatment.

Capecitabine-loaded anti-cancer nanocomposite hydrogel drug delivery systems: in vitro and in vivo efficacy against the 4T1 murine breast cancer cells

In this work, nanocomposite hydrogel drug delivery systems based on polyvinyl alcohol and montmorillonite loaded with the capecitabine, as an anti-cancer drug, were developed for oral administration. The gel fraction and swelling ability of the prepared nanocomposite hydrogels were experimentally measured. In vitro release kinetics of capecitabine in nanocomposite hydrogel drug delivery systems were studied. In vitro flow cytometry assay was utilized to exhibit the anti-cancer activity of the prepared nanocomposite hydrogel drug delivery systems against 4T1 cancer cell line. The anti-tumor efficacy of the nanocomposite hydrogel drug delivery systems was also studied in vivo on animal models. The results showed that the amount of montmorillonite incorporated into the nanocomposite hydrogel drug delivery systems could be recognized as a key parameter to adjust the values of the gel fraction, swelling and capecitabine release rate in a manner which by increasing the montmorillonite content, the gel fraction is increased while the swelling and drug release rate are decreased. The flow cytometry results demonstrated the better anti-cancer activity of the capecitabine-loaded nanocomposite hydrogel drug delivery systems as compared with the pure capecitabine. The in vivo assays indicated that the administration of nanocomposite hydrogel drug delivery systems had a significant effect on the reduction of the tumor growth in animal models as compared with pure capecitabine administration. In general, the prepared nanocomposite hydrogel drug delivery systems exhibited a suitable efficacy against 4T1 cancer cell line both in vitro and in vivo and they could be considered as promising candidates for controlled release of anti-cancer drugs in chemotherapy with enhanced therapeutic effects.

Injectable Hydrogels for Cancer Therapy over the Last Decade

The interest in injectable hydrogels for cancer treatment has been significantly growing over the last decade, due to the availability of a wide range of starting polymer structures with tailored features and high chemical versatility. Many research groups are working on the development of highly engineered injectable delivery vehicle systems suitable for combined chemo-and radio-therapy, as well as thermal and photo-thermal ablation, with the aim of finding out effective solutions to overcome the current obstacles of conventional therapeutic protocols. Within this work, we have reviewed and discussed the most recent injectable hydrogel systems, focusing on the structure and properties of the starting polymers, which are mainly classified into natural or synthetic sources. Moreover, mapping the research landscape of the fabrication strategies, the main outcome of each system is discussed in light of possible clinical applications.

Targeted therapy in chronic diseases using nanomaterial-based drug delivery vehicles

The application of nanomedicines is increasing rapidly with the promise of targeted and efficient drug delivery. Nanomedicines address the shortcomings of conventional therapy, as evidenced by several preclinical and clinical investigations indicating site-specific drug delivery, reduced side effects, and better treatment outcome. The development of suitable and biocompatible drug delivery vehicles is a prerequisite that has been successfully achieved by using simple and functionalized liposomes, nanoparticles, hydrogels, micelles, dendrimers, and mesoporous particles. A variety of drug delivery vehicles have been established for the targeted and controlled delivery of therapeutic agents in a wide range of chronic diseases, such as diabetes, cancer, atherosclerosis, myocardial ischemia, asthma, pulmonary tuberculosis, Parkinson's disease, and Alzheimer's disease. After successful outcomes in preclinical and clinical trials, many of these drugs have been marketed for human use, such as Abraxane®, Caelyx®, Mepact®, Myocet®, Emend®, and Rapamune®. Apart from drugs/compounds, novel therapeutic agents, such as peptides, nucleic acids (DNA and RNA), and genes have also shown potential to be used as nanomedicines for the treatment of several chronic ailments. However, a large number of extensive clinical trials are still needed to ensure the short-term and long-term effects of nanomedicines in humans. This review discusses the advantages of various drug delivery vehicles for better understanding of their utility in terms of current medical needs. Furthermore, the application of a wide range of nanomedicines is also described in the context of major chronic diseases.

Non-Anticoagulant Heparin Prodrug Loaded Biodegradable and Injectable Thermoresponsive Hydrogels for Enhanced Anti-Metastasis Therapy

Metastasis is a pathogenic spread of cancer cells from the primary site to surrounding tissues and distant organs, making it one of the primary challenges for effective cancer treatment and the major cause of cancer mortality. Heparin-based biomaterials exhibit significant inhibition of cancer cell metastasis. In this study, a non-anticoagulate heparin prodrug is developed for metastasis treatment with a localized treatment system using temperature sensitive, injectable, and biodegradable (poly-(ε-caprolactone-co-lactide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone-co-lactide) polymeric hydrogel. The drug molecule (heparin) is conjugated with the polymer via esterification, and its sustained release is ensured by hydrolysis and polymeric biodegradation. An aqueous solution of the polymer could be used as an injectable solution at below 25 °C and it achieves gel formation at 37 °C. The anti-metastasis effect of the hydrogels is investigated both in vitro and in vivo. The results demonstrated that local administration of injectable heparin-loaded hydrogels effectively promote an inhibitory effect on cancer metastasis.

A personalized and long-acting local therapeutic platform combining photothermal therapy and chemotherapy for the treatment of multidrug-resistant colon tumor

BACKGROUND

Local photothermal therapy (PTT) provides an easily applicable, noninvasive adjunctive therapy for colorectal cancer (CRC), especially when multidrug resistance (MDR) occurs. However, using PTT alone does not result in complete tumor ablation in many cases, thus resulting in tumor recurrence and metastasis.

MATERIALS AND METHODS

In this study, we aim to develop a personalized local therapeutic platform combining PTT with long-acting chemotherapy for the treatment of MDR CRC. The platform consists of polyethylene glycol (PEG)-coated gold nanorods (PEG-GNRs) and D-alpha-tocopheryl PEG 1000 succinate (TPGS)-coated paclitaxel (PTX) nanocrystals (TPGS-PTX NC), followed by the incorporation into an in situ hydrogel (gel) system (GNRs-TPGS-PTX NC-gel) before injection. After administration, PEG-GNRs can exert quick and efficient local photothermal response under near-infrared laser irradiation to shrink tumor; TPGS-PTX NC then provides a long-acting chemotherapy due to the sustained release of PTX along with the P-glycoprotein inhibitor TPGS to reverse the drug resistance.

RESULTS

The cytotoxicity studies showed that the IC50 of GNRs-TPGS-PTX NC-gel with laser irradiation decreased to ~178-folds compared with PTX alone in drug-resistant SW620 AD300 cells. In the in vivo efficacy test, after laser irradiation, the GNRs-TPGS-PTX NC-gel showed similar tumor volume inhibition compared with GNRs-gel at the beginning. However, after 14 days, the tumor volume of the mice treated with GNRs-gel quickly increased, while that of the mice treated with GNRs-TPGS-PTX NC-gel remained controllable due to the long-term chemotherapeutic effect of TPGS-PTX NC. The mice treated with GNRs-TPGS-PTX NC-gel also showed no weight loss and obvious organ damages and lesions during the treatment, indicating a low systemic side effect profile and a good biocompatibility.

CONCLUSION

Overall, the nano-complex may serve as a promising local therapeutic patch against MDR CRC with one-time dosing to achieve a long-term tumor control. The doses of PEG-GNRs and TPGS-PTX NC can be easily adjusted before use according to patient-specific characteristics potentially making it a personalized therapeutic platform.

A Custom Radiopaque Thermoresponsive Chemotherapy-Loaded Hydrogel for Intratumoural Injection: An In Vitro and Ex Vivo Assessment of Imaging Characteristics and Material Properties

PURPOSE

Thermoresponsive hydrogels are gels which have different properties at varying temperatures. The objective of this study was to assess the material characteristics, imaging properties and chemotherapeutic drug release profile of a novel radiopaque thermoresponsive hydrogel in vitro, which is liquid at room temperature but solidifies at body temperature, to determine potential suitability for intratumoural delivery.

MATERIALS AND METHODS

An iodinated radiopaque thermoresponsive hydrogel was formulated using iodixanol at a range of concentrations and assessed for sol-gel transition, radiopacity and imaging using CT and US. A lead formulation containing iodixanol at a concentration of 9.22% weight by weight (w/w, g of iodixanol per g of hydrogel) was evaluated in vitro for injectability, disintegration and dual drug release of cisplatin and paclitaxel from the hydrogel formulation.

RESULTS

Radiopacity of the hydrogel increased in a concentration-dependent manner, but the highest concentration of iodixanol evaluated in this study (13.83% w/w) adversely affected the sol-gel transition of the hydrogel; therefore, 9.22% w/w iodixanol hydrogel was identified as the lead formulation. This formulation was readily visible on both CT and US. The formulation was hand injectable through a range of clinically relevant devices, had a sustained disintegration profile for up to 28 days and was able to deliver a sustained release of chemotherapeutic drug for up to 10 days.

CONCLUSIONS

Favourable in vitro and ex vivo imaging and material characteristics of this thermoresponsive gel are demonstrated, suggesting potential interventional oncology applications for image-guided intratumoural delivery of sustained-release chemotherapy.

In Situ Drug Delivery to Breast Cancer-Associated Extracellular Matrix

The extracellular matrix (ECM) contributes to tumor progression through changes induced by tumor and stromal cell signals that promote increased ECM density and stiffness. The increase in ECM stiffness is known to promote tumor cell invasion into surrounding tissues and metastasis. In addition, this scar-like ECM creates a protective barrier around the tumor that reduces the effectiveness of innate and synthetic antitumor agents. Herein, clinically approved breast cancer therapies as well as novel experimental approaches that target the ECM are discussed, including in situ hydrogel drug delivery systems, an emerging technology the delivers toxic chemotherapeutics, gene-silencing microRNAs, and tumor suppressing immune cells directly inside the tumor. Intratumor delivery of therapeutic agents has the potential to drastically reduce systemic side effects experienced by the patient and increase the efficacy of these agents. This review also describes the opposing effects of ECM degradation on tumor progression, where some studies report improved drug delivery and delayed cancer progression and others report enhanced metastasis and decreased patient survival. Given the recent increase in ECM-targeting drugs entering preclinical and clinical trials, understanding and addressing the factors that impact the effect of the ECM on tumor progression is imperative for the sake of patient safety and survival outcome.

A hybrid genipin-crosslinked dual-sensitive hydrogel/nanostructured lipid carrier ocular drug delivery platform

The objective of this study was to develop a novel hybrid genipin-crosslinked dual-sensitive hydrogel/nanostructured lipid carrier (NLC) drug delivery platform. An ophthalmic anti-inflammatory drug, baicalin (BN) was chosen as the model drug. BN-NLC was prepared using melt-emulsification combined with ultra-sonication technique. Additionally, a dual pH- and thermo-sensitive hydrogel composed of carboxymethyl chitosan (CMCS) and poloxamer 407 (F127) was fabricated by a cross-linking reaction with a nontoxic crosslinker genipin (GP). GP-CMCS/F127 hydrogel was characterized by FTIR, NMR, XRD and SEM. The swelling studies showed GP-CMCS/F127 hydrogel was both pH- and thermo-sensitive. The results of in vitro release suggested BN-NLC gel can prolong the release of baicalin comparing with BN eye drops and BN-NLC. Ex vivo cornea permeation study was evaluated using Franz diffusion cells. The apparent permeability coefficient (P_app ) of BN-NLC gel was much higher (4.46-fold) than that of BN eye drops. Through the determination of corneal hydration levels, BN-NLC gel was confirmed that had no significant irritation to cornea. Ex vivo precorneal retention experiments were carried out by a flow-through approach. The results indicated that the NLC-based hydrogel can prolong precorneal residence time. In conclusion, the hybrid NLC-based hydrogel has a promising potential for application in ocular drug delivery.

The effect of PLGA-based hydrogel scaffold for improving the drug maximum-tolerated dose for in situ osteosarcoma treatment

Although hydrogel-based therapeutic agents have shown great potential for localized cancer treatments, the maximum tolerated dose (MTD) of these methods remains uncertain. To confirm this, doxorubicin (DOX) loaded PLGA-PEG-PLGA hydrogel was employed to investigate the MTD of DOX for localized osteosarcoma treatment. This hydrogel showed good injectable and biodegradable properties in vivo. And the drug remaining time was also obviously prolonged in the tumor site. Different doses of DOX (5.0, 15, 30 mg/kg) with/without hydrogel were adopted to the treatment of tumor-bearing mice. Despite both localized administrations of 5.0 mg/kg DOX showing no obvious systemic toxicity, this dose failed to control the persistent growth of tumors or prolong the survival time in comparison with the control groups. Localized administration of 30 mg/kg DOX showed a high efficacy for suppressing tumor growth, but exhibited obvious body weight losing at the same time. Correspondingly, the DOX-loaded hydrogel with the dose of 15 mg/kg achieved significantly improved anti-tumor efficacy and prolonged mean survival time compared with both the free DOX (15 mg/kg) and other control groups. Furthermore, during the whole therapeutic process, the mice showed no obvious body weight loss, major organs damage or death in this group. The MTD of DOX-loaded agent based on the PLGA-PEG-PLGA hydrogel gave a 2-fold increase compared to the MTD of free DOX (7.5 mg/kg, intravenous injection) for the mouse without significant systemic toxicity.

Biopolymers for Antitumor Implantable Drug Delivery Systems: Recent Advances and Future Outlook

In spite of remarkable improvements in cancer treatments and survivorship, cancer still remains as one of the major causes of death worldwide. Although current standards of care provide encouraging results, they still cause severe systemic toxicity and also fail in preventing recurrence of the disease. In order to address these issues, biomaterial-based implantable drug delivery systems (DDSs) have emerged as promising therapeutic platforms, which allow local administration of drugs directly to the tumor site. Owing to the unique properties of biopolymers, they have been used in a variety of ways to institute biodegradable implantable DDSs that exert precise spatiotemporal control over the release of therapeutic drug. Here, the most recent advances in biopolymer-based DDSs for suppressing tumor growth and preventing tumor recurrence are reviewed. Novel emerging biopolymers as well as cutting-edge polymeric microdevices deployed as implantable antitumor DDSs are discussed. Finally, a review of a new therapeutic modality within the field, which is based on implantable biopolymeric DDSs, is given.

Phenylboronic Acid Functionalized Polycarbonate Hydrogels for Controlled Release of Polymyxin B in Pseudomonas Aeruginosa Infected Burn Wounds

While physically crosslinked polycarbonate hydrogels are effective drug delivery platforms, their hydrophobic nature and lack of side chain functionality or affinity ligands for controlled release of hydrophilic drugs underscore the importance of their chemical compositions. This study evaluates an array of anionic hydrogel systems of phenylboronic acid functionalized triblock copolymers prepared via reversible physical interactions. Variation of key chemical functionalities while maintaining similar core structural features demonstrates the influence of the substitution position and protection of the boronic acid functionality on gel viscoelasticity and mechanical strength at physiological pH. The optimum gel systems obtained from the meta-substituted copolymers (m-PAP) are stable at physiological pH and nontoxic to mammalian dermal cells. The polymyxin B loaded m-PAP hydrogels demonstrate controlled in vitro drug release kinetics and in vitro antimicrobial activity against Pseudomonas aeruginosa over 48 h. In vivo antimicrobial efficacy of the drug loaded hydrogels further corroborates the in vitro results, demonstrating sustained antimicrobial activity against P. aeruginosa burn wound infections. The current strategy described in this study demonstrates a straightforward approach in designing physiologically relevant boronic acid hydrogel systems for controlled release of cationic antimicrobials for future clinical applications.

pH/NIR-Responsive Polypyrrole-Functionalized Fibrous Localized Drug-Delivery Platform for Synergistic Cancer Therapy

Localized drug-delivery systems (LDDSs) are a promising approach for cancer treatment because they decrease systematic toxicity and enhance the therapeutic effect of the drugs via site-specific delivery of active compounds and possible gradual release. However, the development of LDDS with rationally controlled drug release and intelligent functionality holds great challenge. To this end, we have developed a tailorable fibrous site-specific drug-delivery platform functionalized with pH- and near-infrared (NIR)-responsive polypyrrole (PPy), with the aim of cancer treatment via a combination of photothermal ablation and chemotherapy. First, a paclitaxel (PTX)-loaded polycaprolactone (PCL) (PCL-PTX) mat was prepared by electrospinning and subsequently in situ membrane surface-functionalized with different concentrations of PPy. The obtained PPy-functionalized mats exhibited excellent photostability and heating property in response to NIR exposure. PPy-coated mats exhibited enhanced PTX release in a pH 5.5 environment compared to pH 7.4. Release was further accelerated in response to NIR under both conditions; however, superior release was observed at pH 5.5 compared to pH 7.4, indicating a dual stimuli-responsive (pH and NIR) drug-delivery platform. More importantly, the 808 nm NIR irradiation enabled markedly accelerated PTX release from PPy-coated PCL-PTX mats and slowed and sustained release following termination of laser irradiation, confirming representative stepwise drug-release properties. PPy-coated PCL-PTX mats presented significantly enhanced in vitro and in vivo anticancer efficacy under NIR irradiation compared to PPy-coated PCL-PTX mats not exposed to NIR or uncoated mats (PCL-PTX). This study has thus developed a promising fibrous site-specific drug-delivery platform with NIR- and pH-triggering that notably utilizes PPy as a dopant for synergistic photothermal chemotherapy.

Thermoresponsive Hydrogels and Their Biomedical Applications: Special Insight into Their Applications in Textile Based Transdermal Therapy

Various natural and synthetic polymers are capable of showing thermoresponsive properties and their hydrogels are finding a wide range of biomedical applications including drug delivery, tissue engineering and wound healing. Thermoresponsive hydrogels use temperature as external stimulus to show sol-gel transition and most of the thermoresponsive polymers can form hydrogels around body temperature. The availability of natural thermoresponsive polymers and multiple preparation methods of synthetic polymers, simple preparation method and high functionality of thermoresponsive hydrogels offer many advantages for developing drug delivery systems based on thermoresponsive hydrogels. In textile field applications of thermoresponsive hydrogels, textile based transdermal therapy is currently being applied using drug loaded thermoresponsive hydrogels. The current review focuses on the preparation, physico-chemical properties and various biomedical applications of thermoresponsive hydrogels based on natural and synthetic polymers and especially, their applications in developing functionalized textiles for transdermal therapies. Finally, future prospects of dual responsive (pH/temperature) hydrogels made by these polymers for textile based transdermal treatments are mentioned in this review.

Thermoresponsive Hydrogels and Their Biomedical Applications: Special Insight into Their Applications in Textile Based Transdermal Therapy

Various natural and synthetic polymers are capable of showing thermoresponsive properties and their hydrogels are finding a wide range of biomedical applications including drug delivery, tissue engineering and wound healing. Thermoresponsive hydrogels use temperature as external stimulus to show sol-gel transition and most of the thermoresponsive polymers can form hydrogels around body temperature. The availability of natural thermoresponsive polymers and multiple preparation methods of synthetic polymers, simple preparation method and high functionality of thermoresponsive hydrogels offer many advantages for developing drug delivery systems based on thermoresponsive hydrogels. In textile field applications of thermoresponsive hydrogels, textile based transdermal therapy is currently being applied using drug loaded thermoresponsive hydrogels. The current review focuses on the preparation, physico-chemical properties and various biomedical applications of thermoresponsive hydrogels based on natural and synthetic polymers and especially, their applications in developing functionalized textiles for transdermal therapies. Finally, future prospects of dual responsive (pH/temperature) hydrogels made by these polymers for textile based transdermal treatments are mentioned in this review.

Controlled drug delivery vehicles for cancer treatment and their performance

Although conventional chemotherapy has been successful to some extent, the main drawbacks of chemotherapy are its poor bioavailability, high-dose requirements, adverse side effects, low therapeutic indices, development of multiple drug resistance, and non-specific targeting. The main aim in the development of drug delivery vehicles is to successfully address these delivery-related problems and carry drugs to the desired sites of therapeutic action while reducing adverse side effects. In this review, we will discuss the different types of materials used as delivery vehicles for chemotherapeutic agents and their structural characteristics that improve the therapeutic efficacy of their drugs and will describe recent scientific advances in the area of chemotherapy, emphasizing challenges in cancer treatments.

Improving the delivery of cancer therapies to tumor sites is crucial to reduce unwanted side effects and patient mortality rates. Pralay Maiti and colleagues at the Indian Institute of Technology in Varanasi, India, review the latest developments in drug delivery vehicles and treatment approaches designed to enhance the effectiveness of current cancer therapies. New nanoparticle-based carriers, hydrogels and hybrid materials that offer controlled and sustained drug release are showing great promise in animal models. Furthermore, materials that respond to stimuli such as heat, light, magnetic or electric fields are also being tested to aid target-specific drug delivery and, thus, avoid damage to healthy tissues. Although there are some challenges in translating these findings to the clinic, there is no doubt that technological advances are shaping better and safer treatment options.

A microscopic view of graphene-oxide/poly(acrylic acid) physical hydrogels: effects of polymer charge and graphene oxide loading

In this work we have examined in detail by means of fully atomistic molecular dynamics simulations, physical hydrogels formed by a polymer electrolyte, poly(acrylic acid), and graphene oxide, at two different charging states of the polymer and two different graphene oxide concentrations. It was found that variations of these parameters incurred drastic changes in general morphological characteristics of the composite materials, the degree of physical adsorption of polyelectrolyte chains onto the graphene oxide surface, the polymer dynamic response at local and global length scales, in the charge distributions around the components, and in the mobility of the counterions. All these microscopic features are expected to significantly affect macroscopic physical properties of the hydrogels, such as their mechanical responses and their electrical behaviors.

[The role of poloxamer 188 for cord blood mononuclear cells into megakaryocytes cultivation and induction in three-dimensional WAVE Bioreactor]

Objective: To observe the effect of poloxamer 188 (P188) on megakaryocyte cultivation and induction from cord blood mononuclear cells in order to obtain more megakaryocyte progenitor cells (MPC). Methods: The cord blood mononuclear cells were isolated and inoculated in cell culture bag or cell culture flask respectively. The WIGGENS shaker and cell culture bags were used to mimick WAVE Bioreactor for three-dimensional (3D) cell culture, and the P188 was added to induction medium, The cells were detected for morphology, surface marker, viability, and number on day 14. Results: In the two-dimensional (2D) culture, CD41(+), CD41(+)/CD61(+), CD61(+) megakaryocytic numbers increased significantly after adding P188 (all P<0.01). And in the 3D culture of adding P188, the cell volume became larger and the nuclear shape was irregular, the cytoplasm appeared magenta granules, and the megakaryocyte cells became more mature. By 3D culture, the expression of CD41/CD61 was (36.30±1.27)% vs (23.95±1.34)%, hence the differentiation for MPC was significantly higher than that in the 2D group (P<0.01). Furthermore, adding P188 in 3D culture resulted in highest differentiation efficiency for MPC [(59.45±1.20)%]. There were no significantly differences in terms of cell viability and cell number among 3D culture containing P188, 2D and 3D culture groups (all P>0.05). Conclusion: 3D culture was beneficial for the differentiation of MPC, but the cell viability was lower than 2D group; However, the satisfied cell growth and better induction efficiency were obtained by adding of P188, which might provide a new method of megakaryocytes production for clinical application.

Dextran hydrogels by crosslinking with amino acid diamines and their viscoelastic properties

Amine functionalized polysaccharide hydrogels such as those based on chitosan are widely examined as biomaterials. Here we set out to develop a facile procedure for developing such hydrogels by crosslinking dextran with amino acid diamines. The dextran-amino acid gels were formed by the addition of the amino acid diamines to a dextran and epichlorohydrin solution once it became homogeneous. This was demonstrated with three amino acid diamines, lysine, lysine methyl ester, and cystine dimethyl ester. Hydrogel networks with albumin entrapped were also demonstrated. These hydrogels were characterized by FTIR, SEM, rotational rheometry, swelling studies and cell biocompatibility analysis. These hydrogels showed the unexpected pH-responsive behavior of greater swelling at more basic pH, similar to that of an anionic hydrogel. This is uncharacteristic for amine functionalized gels as they typically exhibit cationic hydrogel behavior. All hydrogels showed similar biocompatibility to that of dextran crosslinked without amino acids.

Shear-responsive injectable supramolecular hydrogel releasing doxorubicin loaded micelles with pH-sensitivity for local tumor chemotherapy

In this study, glycol chitosan-Pluronic F127 conjugate (GC-PF127), produced by an amidation reaction between terminal-carboxylated PF127 and glycol chitosan (GC), was used to prepare doxorubicin (DOX)-loaded micelles. The DOX/GC-PF127 micelles produced at optimal conditions had sizes of about 150nm and pH-sensitive surface charges. DOX/GC-PF127 hydrogel formed after addition of α-cyclodextrin into DOX/GC-PF127 micelle solution. The hydrogel had good shear-responsive, injectable and rapid recovery properties. In vitro release experiment confirmed that the hydrogel could sustainedly release DOX/GC-PF127 micelles via the dissociation of the hydrogel. After peritumoral injection into H22 tumor-bearing mice, the hydrogel could greatly increase DOX accumulation in tumor tissue and synchronously avoid DOX accumulation in normal tissues including heart. At similar total DOX dose administrated, the tumors of free DOX treatment group grew slowly after thrice intravenous injections, the tumors of the micelle group did not grow after twice intravenous injections, and the tumors of the hydrogel group disappeared almost after once peritumoral injection. This study demonstrates that injectable DOX/GC-PF127 hydrogel, which can sustainedly release DOX-loaded micelles with tumor-targeting function, is a promising system for local tumor chemotherapy.

Polymeric Hydrogels as Technology Platform for Drug Delivery Applications

Hydrogels have become key players in the field of drug delivery owing to their great versatility in terms of composition and adjustability to various administration routes, from parenteral (e.g., intravenous) to non-parenteral (e.g., oral, topical) ones. In addition, based on the envisioned application, the design of bioadhesive or mucoadhesive hydrogels with prolonged residence time in the administration site may be beneficial. For example, hydrogels are used as wound dressings and patches for local and systemic therapy. In a similar way, they can be applied in the vaginal tract for local treatment or in the nasal cavity for a similar goal or, conversely, to target the central nervous system by the nose-to-brain pathway. Overall, hydrogels have demonstrated outstanding capabilities to ensure patient compliance, while achieving long-term therapeutic effects. The present work overviews the most relevant and recent applications of hydrogels in drug delivery with special emphasis on mucosal routes.