Synthesis of agarose-graft-poly[3-dimethyl (methacryloyloxyethyl) ammonium propanesulfonate] zwitterionic graft copolymers via ATRP and their thermally-induced aggregation behavior in aqueous media

Designing Zwitterionic Bottlebrush Polymers to Enable Long-Cycling Quasi-Solid-State Lithium Metal Batteries

Ionogel polymer electrolyte (IPE), incorporating ionic liquid (IL) within a polymer matrix, presents a promising avenue for safe quasi-solid-state lithium metal batteries. However, sluggish Li+ kinetics, resulting from the formation of [Li(anion)n]-(n-1) clusters and the occupation of Li+ transport sites by organic cations, limit their practical applications. In this study, we have developed zwitterionic bottlebrush polymers-based IPE with promoted Li+ conduction by employing poly(sulfobetaine methacrylate)-grafted poly(vinylidene fluoride-co-chlorotrifluoroethylene) (PVC-g-PSBMA) bottlebrushes as matrices of IL. The grafted zwitterionic side chains greatly facilitate the dissociation of [Li(anion)n]-(n-1) clusters to produce more movable Li+. Moreover, the positively charged -NR4 + groups in zwitterionic side chains effectively restrain anions migration, while the negatively charged -SO3 - groups immobilize IL cations, preventing them from occupying Li+ hopping sites and reducing the energy barrier for Li+ migration. These synergistic effects contribute to a notable ionic conductivity (7.5×10-4 S cm-1) and Li+ transference number (0.62) of PVC-g-PSBMA IPE at 25 °C. As a result, PVC-g-PSBMA IPE enables ultralong-term (over 6500 h) reversible and stable Li plating/stripping in Li||Li symmetric cells. Remarkably, the assembled Li||LiFePO4 full batteries demonstrate unprecedented cycling stability of more than 2000 cycles with a superior capacity retention of 93.7 %.

An electrochemically mediated ATRP synthesis of lignin-g-PDMAPS UCST-thermoresponsive polymer

It is a promising idea to graft zwitterionic polymers onto lignin and prepare lignin-grafted-poly [2-(methacryloyloxy) ethyl] dimethyl-(3-sulfopropyl) ammonium hydroxide (Lignin-g-PDMAPS) thermosensitive polymer with the upper critical solution temperature (UCST). In this paper, an electrochemically mediated atom transfer radical polymerization (eATRP) method was used to prepare Lignin-g-PDMAPS. The structure and property of the Lignin-g-PDMAPS polymer were characterized by the fourier transform infrared spectrum (FT-IR), nuclear magnetic resonance (NMR), X-ray electron spectroscopy (XPS), dynamic light scattering (DLS), differential scanning calorimeter (DSC). Furthermore, the effect of catalyst structure, applied potential, amount of Lignin-Br, Lignin-g-PDMAPS concentration, NaCl concentration on UCST of Lignin-g-PDMAPS were investigated. It was worth noting that polymerization was well controlled when the ligand was tris (2-aminoethyl) amine (Me₆TREN), applied potential was -0.38 V and the amount of Lignin-Br was 100 mg. And the UCST of the Lignin-g-PDMAPS aqueous solution (1 mg/ml) was 51.47 °C, the molecular weight was 8987 g/mol, and the particle size was 318 nm. It was also found that the UCST increased and the particle size decreased with the Lignin-g-PDMAPS polymer concentration increased, and the UCST decreased and the particle size increased with the NaCl concentration increases. This work investigated UCST-thermoresponsive polymer which possessed lignin main chain combining the zwitterionic side chain, and provided a new way for development of lignin based UCST-thermoresponsive materials and medical carrier materials, in addition to expand the scope of eATRP.

Novel zwitterionic vectors: Multi-functional delivery systems for therapeutic genes and drugs

Zwitterions consist of equal molar cationic and anionic moieties and thus exhibit overall electroneutrality. Zwitterionic materials include phosphorylcholine, sulfobetaine, carboxybetaine, zwitterionic amino acids/peptides, and other mix-charged zwitterions that could form dense and stable hydration shells through the strong ion-dipole interaction among water molecules and zwitterions. As a result of their remarkable hydration capability and low interfacial energy, zwitterionic materials have become ideal choices for designing therapeutic vectors to prevent undesired biosorption especially nonspecific biomacromolecules during circulation, which was termed antifouling capability. And along with their great biocompatibility, low cytotoxicity, negligible immunogenicity, systematic stability and long circulation time, zwitterionic materials have been widely utilized for the delivery of drugs and therapeutic genes. In this review, we first summarized the possible antifouling mechanism of zwitterions briefly, and separately introduced the features and advantages of each type of zwitterionic materials. Then we highlighted their applications in stimuli-responsive "intelligent" drug delivery systems as well as tumor-targeting carriers and stressed the multifunctional role they played in therapeutic gene delivery.

Structure-controlled zwitterionic nanocapsules with thermal-responsiveness

A facile approach is established to prepare zwitterionic nanocapsules (ZN C s) with controlled diameters and core/shell structures based on an inverse reversible addition-fragmentation transfer (RAFT) miniemulsion interfacial polymerization method. The diameters and core volume fractions of ZNCs can be tuned finely from 61 to 220 nm and from 0.22 to 0.61, respectively. Furthermore, the thermal-responsive property of the prepared zwitterionic nanocapsules was systematically studied relating to core/shell ratios and cross-linking degrees. These ZNCs could be particularly useful in constructing polymeric materials with well-defined nanoporous structures for nano-void membranes, drug delivery devices and catalytic carriers.

Thermosensitive double network of zwitterionic polymers for controlled mechanical strength of hydrogels

Zwitterionic hydrogels have promising potential as a result of their anti-fouling and biocompatible properties, but they have recently also gained further attention due to their controllable stimuli responses. We successfully synthesized two zwitterionic polymers, poly(2-methacryloyloxyethyl phosphorylcholine) (poly-MPC) and poly(2-(methacryloyloxy)ethyl dimethyl-(3-sulfopropyl)ammonium hydroxide) (poly-DMAPS), which have complementary ionic sequences in their respective zwitterionic side groups and likely form an interpenetrating double network to improve their mechanical strength. The synthesized poly-MPC was blended in a poly-DMAPS matrix (MD gel) and showed high viscosity, while poly-DMAPS was blended in a poly-MPC hydrogel (DM gel) and revealed UCST behavior as the temperature increased. In addition, cross-section images of the MD hydrogel exhibited its compact and uniform structure, while the DM gel was found to exhibit a porous micro-structure with clear boundaries. The results explained the low viscosity of the DM gel, which was also confirmed via 3D Raman mapping. To sum up, the preliminary data demonstrated that binary zwitterionic hydrogels have thermosensitive mechanical properties, promoting further bio-applications in the future, such as in wound healing.

Zwitterionic hydrogels have promising anti-fouling properties but weak mechanical strength. Here, we synthesized two polyzwitterions, formulated them as double network hydrogels for improving strength and for controlled by temperature stimuli.

Dissolution-Crystallization Transition within a Polymer Hydrogel for a Processable Ultratough Electrolyte

Although nonliquid electrolytes have been developed rapidly under the condition of safe demand of energy storage devices, the inherent weaknesses in ionic conductivity, mechanical properties, or interfacial compatibility severely hinder their application under a harsh environment. Inspired by the hybridized characteristics of composite materials and the potential advantages of hydrated crystals, a processable crystal-type gel electrolyte with good comprehensive performance via the dissolution-crystallization transition of NaAc within hydrogel is creatively prepared. The use of NaAc crystal within a hydrogel leads to nearly 26 000 times greater modulus (474.24 MPa) and higher operating voltage (2.0 V) than the hydrogel without the crystal. The reliable supercapacitor using this electrolyte can work in extreme environment (-40 to 80 °C, even in the fire or in liquid nitrogen within a short time) benefiting from its phase-transition capacity. This investigation offers a facile and versatile way to construct an ideal gel electrolyte for next-generation energy storage devices.

Synthesis of Zwitterionic Copolymers via Copper-Mediated Aqueous Living Radical Grafting Polymerization on Starch

[2-(Methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (SBMA) is a well-studied sulfobetaine-methacrylate as its zwitterionic structure allows the synthesis of polymers with attractive properties like antifouling and anti-polyelectrolyte behavior. In the present work, we report the Cu⁰-mediated living radical polymerization (Cu⁰-mediated LRP) of SBMA in sodium nitrate aqueous solution instead of previously reported solvents like trifluoroethanol and sodium chloride aqueous/alcoholic solution. Based on this, starch-g-polySBMA (St-g-PSBMA) was also synthesized homogeneously by using a water-soluble waxy potato starch-based macroinitiator and CuBr/hexamethylated tris(2-aminoethyl)amine (Me₆TREN) as the catalyst. The structure of the macroinitiator was characterized by ¹H-NMR, 13C-NMR, gHSQC, and FT-IR, while samples of PSBMA and St-g-PSBMA were characterized by ¹H-NMR and FT-IR. Monomer conversion was monitored by ¹H-NMR, on the basis of which the reaction kinetics were determined. Both kinetic study and GPC results indicate reasonable controlled polymerization. Furthermore, a preliminary study of the thermal response behavior was also carried through rheological tests performed on aqueous solutions of the prepared materials. Results show that branched zwitterionic polymers are more thermal-sensitive than linear ones.

Agarose-based biomaterials for tissue engineering

Agarose is a natural polysaccharide polymer having unique characteristics that give reason to consider it for tissue engineering applications. Special characteristics of agarose such as its excellent biocompatibility, thermo-reversible gelation behavior and physiochemical features support its use as a biomaterial for cell growth and/or controlled/localized drug delivery. The resemblance of this natural carbohydrate polymer to the extracellular matrix results in attractive features that bring about a strong interest in its usage in the field. The scope of this review is to summarize the extensive researches addressing agarose-based biomaterials in order to provide an in-depth understanding of its tissue engineering-related applications.

Nanogel-like UCST triblock copolymer micelles showing large volume expansion before abrupt dissolution

A comprehensive study of the thermally induced large expansion in volume prior to the abrupt dissociation of the micelles of a novel UCST triblock copolymer.

Preparation of Vascular Endothelial Cadherin Loaded-Amphoteric Copolymer Decorated Coronary Stents for Anticoagulation and Endothelialization

A new strategy for preparation of blood-contact materials, with their short-term anticoagulation depending on zwitterionic structure and long-term hemocompatibility based on endothelialization, was proposed, performed, and proved. The copolymer made of sulfonamide zwitterionic and acrylic acid was designed and synthesized, and grafted to the surface of the bare metal coronary stent. Then, the vascular endothelial cadherin (VE-Cad), one of the specific antibodies of endothelial progenitor cells (EPCs), was fixed onto the copolymer chain. Finally, it is proved by in vitro blood tests that the coronary stent decorated with VE-Cad loaded-amphoteric copolymer displayed good platelet anti-adhesion characteristic. This anti-adhesion characteristic was attributed to the zwitterionic structure and the biofunctionality of specifically capturing EPCs confirmed by the results that the antibody-decorated coronary stent was trapped with EPCs. Finally, the in vivo implantation experiments of the antibody-decorated coronary stent in rabbit for 4 weeks were carried out. Results indicated that the endothelium and smooth surface of the antibody-loaded stent was found to be due to the covered effect of EPCs, without obvious intimal hyperplasia. The strategy we proposed has great potential in the design and preparation of blood-contact biomedical materials and devices.

Temperature-/CO2-dual-responsiveness of a zwitterionic “schizophrenic” copolymer

A zwitterionic “schizophrenic” copolymer with dual-responsiveness to temperature and carbon dioxide self-assembles to undergo a reversible phase transition in a weakly alkaline borate buffer solution.

Importance of zwitterionic incorporation into polymethacrylate-based hydrogels for simultaneously improving optical transparency, oxygen permeability, and antifouling properties

The introduction of zwitterionic SBMA into HEMA hydrogels enables to improve optical transparency, oxygen permeability, and antifouling property for contact lenses-based ophthalmic applications.

Physical Cross-Linking Starch-Based Zwitterionic Hydrogel Exhibiting Excellent Biocompatibility, Protein Resistance, and Biodegradability

In this work, a novel starch-based zwitterionic copolymer, starch-graft-poly(sulfobetaine methacrylate) (ST-g-PSBMA), was synthesized via Atom Transfer Radical Polymerization. Starch, which formed the main chain, can be degraded completely in vivo, and the pendent segments of PSBMA endowed the copolymer with excellent protein resistance properties. This ST-g-PSBMA copolymer could self-assemble into a physical hydrogel in normal saline, and studies of the formation mechanism indicated that the generation of the physical hydrogel was driven by electrostatic interactions between PSBMA segments. The obtained hydrogels were subjected to detailed analysis by scanning electron microscopy, swelling ratio, protein resistance, and rheology tests. Toxicity and hemolysis analysis demonstrated that the ST-g-PSBMA hydrogels possess excellent biocompatibility and hemocompatibility. Moreover, the cytokine secretion assays (IL-6, TNF-α, and NO) confirmed that ST-g-PSBMA hydrogels had low potential to trigger the activation of macrophages and were suitable for in vivo biomedical applications. On the basis of these in vitro results, the ST-g-PSBMA hydrogels were implanted in SD rats. The tissue responses to hydrogel implantation and the hydrogel degradation in vivo were determined by histological analysis (Hematoxylin and eosin, Van Gieson, and Masson's Trichrome stains). The results presented in this study demonstrate that the physical cross-linking, starch-based zwitterionic hydrogels possess excellent protein resistance, low macrophage-activation properties, and good biocompatibility, and they are a promising candidate for an in vivo biomedical application platform.

A strategy for enhanced antibacterial activity against Staphylococcus aureus by the assembly of alamethicin with a thermo-sensitive polymeric carrier

We demonstrate here a strategy for enhanced antibacterial activity against microbial strains by the assembly of antimicrobial peptides with a temperature-responsive polymeric carrier. The assembly complex was less toxic to human cells and more stable to enzymatic cleavage. This work may provide a promising drug delivery system for antimicrobial peptides.

In Situ "Clickable" Zwitterionic Starch-Based Hydrogel for 3D Cell Encapsulation

Three-dimensional (3D) cell encapsulation in hydrogel provides superb methods to investigate the biochemical cues in directing cellular fate and behaviors outside the organism, the primary step of which is to establish suitable "blank platform" to mimic and simplify native ECM microenvironment. In this study, zwitterionic starch-based "clickable" hydrogels were fabricated via a "copper- and light- free" Michael-type "thiol-ene" addition reaction between acylated-modified sulfobetaine-derived starch (SB-ST-A) and dithiol-functionalized poly(ethylene glycol) (PEG-SH). By incorporating antifouling SB-ST and PEG, the hydrogel system would be excellently protected from nontarget protein adsorption to act as a "blank platform". The hydrogels could rapidly gel under physiological conditions in less than 7 min. Dynamic rheology experiments suggested the stiffness of the hydrogel was close to the native tissues, and the mechanical properties as well as the gelation times and swelling behaviors could be easily tuned by varying the precursor proportions. The protein and cell adhesion assays demonstrated that the hydrogel surface could effectively resist nonspecific protein and cell adhesion. The degradation study in vitro confirmed that the hydrogel was biodegradable. A549 cells encapsulated in the hydrogel maintained high viability (up to 93%) and started to proliferate in number and extend in morphology after 2 days' culture. These results indicated the hydrogel presented here could be a potential candidate as "blank platform" for 3D cell encapsulation and biochemical cues induced cellular behavior investigation in vitro.

Dynamics of polyzwitterions in salt-free and salt solutions

Dynamics of polyzwitterions remains largely unclear. We have prepared zwitterionic poly[1-(3-sulphopropyl) betaine-2-vinylpyridinium] (PSB) and investigated its dynamics in aqueous solution as a function of added salt (NaCl) concentration (Cs) by dynamic laser light scattering (DLS) and sedimentation velocity (SV) in analytical ultracentrifugation (AUC). A fast and a slow mode can be observed by DLS in a salt-free and low-salt solution, where the latter exhibits a maximum intensity at Cs ∼ 10(-3) M. SV measurements demonstrate that the fast mode corresponds to the diffusion of individual chains and the slow mode arises from the dynamic inhomogeneity due to interchain electrostatic repulsion. As Cs increases, the sedimentation coefficient exhibits a maximum at Cs ∼ 0.1 M whereas the diffusion coefficient has a minimum at Cs ∼ 10(-3) M and a maximum at Cs ∼ 0.1 M. Namely, PSB shows a complex dynamics in a salt-free and low-salt solution and anti-polyelectrolyte behavior in a high-salt solution. Our studies reveal that the dynamics of polyzwitterions is mediated by the long range interchain electrostatic repulsion and short range intrachain attraction, which are determined by effective charges on the chains.

Intriguingly tuning the fluorescence of AIEgen using responsive polyelectrolyte microspheres

We successfully synthesized counterion-sensitive TPE–METAC polyelectrolyte microspheres and tuned its fluorescence and size by ClO₄⁻, PF₆⁻ and TFSI⁻.

Functional modification mediated value addition of seaweed polysaccharides – a perspective

Value addition of seaweed polysaccharides by their functional modification with various substrates leading to new effects.

A thermoresponsive poly(N-vinylcaprolactam-co-sulfobetaine methacrylate) zwitterionic hydrogel exhibiting switchable anti-biofouling and cytocompatibility

A new class of hydrogels were prepared from the combination of the non-ionic VCL with zwitterionic SBMA monomers, exhibiting anti-biofouling and cytocompatibility.

The synthesis and aqueous solution properties of sulfobutylbetaine (co)polymers: comparison of synthetic routes and tuneable upper critical solution temperatures

With an additional methyl group in the ion bridge, sulfobutylbetaine (co)polymers show significantly higher UCSTs than their more common sulfopropylbetaine counterparts making them a promising class of smart materials.

Thermo-responsiveness and biocompatibility of star-shaped poly[2-(dimethylamino)ethyl methacrylate]-b-poly(sulfobetaine methacrylate) grafted on a β-cyclodextrin core

CDPDS star polymers exhibit tunable UCST behavior by varying arm density, solution pH and NaCl concentration, and can be good candidates used in biomedical relevant fields as well.

Quaternized poly(2-(dimethylamino)ethyl methacrylate)-grafted agarose copolymers for multipurpose antibacterial applications

Polymeric quaternary ammonium salts-functionalized agarose not only exhibit good antibacterial activity in solution form, but also can be solidified to construct antibacterial surfaces.

On the hydrophilicity of polyzwitterion poly (N,N-dimethyl-N-(3-(methacrylamido)propyl)ammoniopropane sulfonate) in water, deuterated water, and aqueous salt solutions

A series of zwitterionic model polymers with defined molar masses up to 150,000 Da and defined end groups are prepared from sulfobetaine monomer N,N-dimethyl-N-(3-(methacrylamido)propyl)ammoniopropanesulfonate (SPP). Polymers are synthesized by reversible addition-fragmentation chain transfer polymerization (RAFT) using a functional chain transfer agent labeled with a fluorescent probe. Their upper critical solution temperature-type coil-to-globule phase transition in water, deuterated water, and various salt solutions is studied by turbidimetry. Cloud points increase with polyzwitterion concentration and molar mass, being considerably higher in D2O than in H2O. Moreover, cloud points are strongly affected by the amount and nature of added salts. Typically, they increase with increasing salt concentration up to a maximum value, whereas further addition of salt lowers the cloud points again, mostly down to below freezing point. The different salting-in and salting-out effects of the studied anions can be correlated with the Hofmeister series. In physiological sodium chloride solution and in phosphate buffered saline (PBS), the cloud point is suppressed even for high molar mass samples. Accordingly, SPP-polymers behave strongly hydrophilic under most conditions encountered in biomedical applications. However, the direct transfer of results from model studies in D2O, using, e.g. (1)H NMR or neutron scattering techniques, to 'normal' systems in H2O is not obvious.

The first amphiphilic graft copolymer bearing a hydrophilic poly(2-hydroxylethyl acrylate) backbone synthesized by successive RAFT and ATRP

This paper reports the first synthesis of well-defined amphiphilic graft copolymers, consisting of a hydrophilic poly(2-hydroxyethyl acrylate) (PHEA) backbone and hydrophobic polystyrene side chains, by the combination of RAFT polymerization, ATRP, and the grafting-from strategy.

Thermo-sensitive zwitterionic block copolymers via ATRP

Novel thermo-sensitive zwitterionic block copolymers synthesized by ATRP exhibited distinct thermo-sensitivity and excellent antifouling property.