Different interfacial behaviors of N- and C-terminus cysteine-modified cecropin P1 chemically immobilized onto polymer surface

Functionalization of hydrophobic surfaces with antimicrobial peptides immobilized on a bio-interfactant layer

The design of functionalized polymer surfaces using bioactive compounds has grown rapidly over the past decade within many industries including biomedical, textile, microelectronics, bioprocessing and food packaging sectors. Polymer surfaces such as polystyrene (PS) must be treated using surface activation processes prior to the attachment of bioactive compounds. In this study, a new peptide immobilization strategy onto hydrocarbonaceus polymer surfaces is presented. A bio-interfactant layer made up of a tailored combination of laccase from trametes versicolor enzyme and maltodextrin is applied to immobilize peptides. Using this strategy, immobilization of the bio-inspired peptide KLWWMIRRWG-bromophenylalanine-3,4-dihydroxyphenylalanine-G and KLWWMIRRWG-bromophenylalanine-G on polystyrene (PS) was achieved. The interacting laccase layers allows to immobilize antimicrobial peptides avoiding the chemical modification of the peptide with a spacer and providing some freedom that facilitates different orientations. These are not strongly dominated by the substrate as it is the case on hydrophobic surfaces; maintaining the antimicrobial activity. Films exhibited depletion efficiency with respect to the growth of Escherichia coli bacteria and did not show cytotoxicity for fibroblast L929. This environmentally friendly antimicrobial surface treatment is both simple and fast, and employs aqueous solutions. Furthermore, the method can be extended to three-dimensional scaffolds as well as rough and patterned substrates.

A bio-interfactant layer is applied on hydrophobic surfaces to immobilize antimicrobial peptides.

Chemically Immobilized Antimicrobial Peptide on Polymer and Self-Assembled Monolayer Substrates

Surfaces with chemically immobilized antimicrobial peptides have been shown to have great potential in various applications such as biosensors and antimicrobial coatings. This research investigated the chemical immobilization of a cecropin-melittin hybrid antimicrobial peptide on two different surfaces, a polymer surface prepared by chemical vapor deposition (CVD) polymerization and a self-assembled monolayer surface. We probed the structure of immobilized peptides using spectroscopic methods and correlated such structural information to the measured antimicrobial activity. We found that the hybrid peptide adopts an α-helical structure after immobilization onto both surfaces. As we have shown previously for another α-helical peptide, MSI-78, immobilized on a SAM, we found that the α-helical hybrid peptide lies down when it contacts bacteria. This study shows that the antimicrobial activity of the surface-immobilized peptides on the two substrates can be well explained by the spectroscopically measured peptide structural data. In addition, it was found that the polymer-based antimicrobial peptide coating is more stable. This is likely due to the fact that the SAM prepared using silane may be degraded after several days whereas the polymer prepared by CVD polymerization is more stable than the SAM, leading to a more stable antimicrobial coating.

Collagen tethering of synthetic human antimicrobial peptides cathelicidin LL37 and its effects on antimicrobial activity and cytotoxicity

Wound infections, particularly of chronic wounds, pose a substantial challenge for designing antimicrobial dressings that are both effective against pathogens, and do not interfere with wound healing. Due to their broad-spectrum antimicrobial and immunomodulatory activities, naturally-occurring antimicrobial peptides (AMPs) are promising alternative treatments. However, their cytotoxicity at high concentrations and poor stability hinders their clinical use. To mitigate these undesirable properties, we investigated the effects of tethering human AMP cathelicidin LL37 to collagen, one of the main extracellular matrix proteins in wound sites, secreted by fibroblasts, and in commercially-available wound dressings. The active domain of human AMP cathelicidin, LL37, and two chimeric peptides containing LL37 fused to collagen binding domains (derived from collagenase - cCBD-LL37 or fibronectin - fCBD-LL37) were synthesized and adsorbed to PURACOL® type I collagen scaffolds. After 14days, 73%, 81% and 99% of LL37, cCBD-LL37 and fCBD-LL37, respectively, was retained on the scaffolds and demonstrated undiminished antimicrobial activity when challenged with both Gram-positive and Gram-negative bacterial strains. Loaded scaffolds were not cytotoxic to fibroblasts despite retaining peptides at concentrations 24 times higher than the reported cytotoxic concentrations in solution. These findings indicate that biopolymer-tethered AMPs may represent a viable alternative for preventing and treating wound infection while also supporting tissue repair.

STATEMENT OF SIGNIFICANCE

Over 6.5million people annually in the United States suffer chronic wounds; many will become infected with antibiotic-resistant bacteria. Treatments used to prevent and fight infection are toxic and may hinder wound healing. AMPs are broad-spectrum antimicrobials that also promote healing; however, their instability and toxicity are major challenges. To overcome treatment gaps, we functionalized collagen scaffolds with chimeric antimicrobial peptides (AMPs) with collagen binding domains to create antimicrobial and non-cytotoxic scaffolds that may promote healing. This is the first report of CBD-mediated delivery of AMPs onto collagen scaffolds that demonstrates no cytotoxicity toward fibroblasts. This study also suggests that retention of antimicrobial activity is CBD-dependent, which provides foundations for fundamental studies of CBD-AMP mechanisms and clinical explorations.

Bactericidal Hydrogels via Surface Functionalization with Cecropin A

The immobilization of antimicrobial peptides (AMPs) to surfaces, enabling their utilization in biosensor and antibacterial/antifouling coating applications, is typically performed using rigid, solid support materials such as glass or gold and may require lengthy, temperamental protocols. Here, we employ a hydrogel immobilization platform to afford facile fabrication and surface functionalization while offering improved biocompatibility for evaluating the influence of linker length, surface density, and AMP conjugation site on retained peptide activity. Rapid, interfacial photo-polymerization using the radical-mediated thiol-ene addition mechanism was used to generate cross-linked, polymeric coatings bearing residual thiol moieties on prefabricated poly(ethylene glycol) (PEG)-based hydrogel supports. The photo-polymerized coatings were 60 μm thick and contained 0.55 nmol of unreacted free thiols, corresponding to a concentration of 410 μM, for use as cecropin A (CPA) immobilization handles via thiol-maleimide conjugation, where the CPA-bound maleimide moiety was localized at either the carboxyl terminus or midsequence between Ala₂₂ and Gly₂₃. Surface presentation of the thiol handles was controlled by varying the thiolated PEG monomer (PEGSH) used in the photo-polymerizable formulation. Bactericidal activity of CPA functionalized hydrogels against E. coli K235 indicated that CPA immobilized at the carboxyl terminus killed 94 ± 6% of the inoculated pathogens when coatings were prepared with high molecular weight PEGSH and 99 ± 1% when prepared with low molecular weight PEGSH. E. coli cell death demonstrated a stronger dependence on peptide concentration than PEG linker length or degree of thiol functionalization, with activity ranging from 34 ± 13% to 99 ± 1% bacterial cells killed as the prefunctionalization thiol concentration in the coatings was increased from 90 to 990 μM. Finally, the immobilization site on the surface-bound CPA strongly affected antibacterial activity; when midsequence modified CPA was bound to a hydrogel coating bearing 990 μM thiol, only 20 ± 4% of the E. coli population was killed.

Secondary Structure Determination of Peptides and Proteins After Immobilization

The presentation of immobilized peptides and other small biomolecules attached to surfaces can be greatly affected by the attachment chemistry and linking moieties, resulting in altered activity and specificity. For this reason, it is critical to understand how the various aspects of surface immobilization-underlying substrate properties, tether structure, and site of linkage-affect the secondary and quaternary structures of the immobilized species. Here, we present methods for attaching cysteine-containing peptides to quartz surfaces and determining the secondary structure of surface-immobilized peptides. We specifically show that, even when covalently immobilized, changes in peptide conformation can still occur, with measurement occurring in real time.

Selective and Reversible Binding of Thiol-Functionalized Biomolecules on Polymers Prepared via Chemical Vapor Deposition Polymerization

We use chemical vapor deposition polymerization to prepare a novel dibromomaleimide-functionalized polymer for selective and reversible binding of thiol-containing biomolecules on a broad range of substrates. We report the synthesis and CVD polymerization of 4-(3,4-dibromomaleimide)[2.2]paracyclophane to yield nanometer thick polymer coatings. Fourier transformed infrared spectroscopy and X-ray photoelectron spectroscopy confirmed the chemical composition of the polymer coating. The reactivity of the polymer coating toward thiol-functionalized molecules was confirmed using fluorescent ligands. As a proof of concept, the binding and subsequent release of cysteine-modified peptides from the polymer coating were also demonstrated via sum frequency generation spectroscopy. This reactive polymer coating provides a flexible surface modification approach to selectively and reversibly bind biomolecules on a broad range of materials, which could open up new opportunities in many biomedical sensing and diagnostic applications where specific binding and release of target analytes are desired.

Comparison of the influence of humidity and D-mannitol on the organization of tetraethylene glycol-terminated self-assembled monolayers and immobilized antimicrobial peptides

We report the use of polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS) to characterize the effects of relative humidity (RH) and d-mannitol on the conformations of tetraethylene glycol (EG4)-terminated self-assembled monolayers (SAMs) and immobilized antimicrobial peptides (Cecropin P1 and a hybrid of Cecropin A (1-8) and Melittin (1-18)). These results are used to assess the extent to which d-mannitol can substitute for water in promoting conformational states of the SAMs and oligopeptides similar to those induced by hydration. Our measurements reveal a red shift of the COC asymmetric stretching vibration of the EG4-terminated SAMs with increasing humidity, consistent with a transition from a mixed all-trans/helical (7/2 helix) conformation at 0% RH to a predominantly helical conformation at 90% RH. Significantly, under dry conditions, a thin (2 nm in thickness) overlayer of d-mannitol generated the COC spectroscopic signature of the EG4-terminated SAM measured at high humidity. Comparisons of the effects of humidity and d-mannitol on the secondary structure of the two oligopeptides also revealed both to cause the amide I peak positions, which were measured in dry air (and without d-mannitol) to correspond to α-helical conformations, to undergo red-shifts. The magnitudes of the red-shifts, however, were more pronounced for dry d-mannitol than for high RH, with Cecropin P1 and the hybrid peptide exhibiting amide I peak positions under d-mannitol consistent with bulk aqueous solution secondary structures (random and β-sheet, respectively). These results are discussed in the context of prior reports of the tendency of d-mannitol to form glassy states in the absence of water. Overall, the results presented in this paper support the hypothesis that d-mannitol can substitute, in at least some ways, for the influence of water on the conformational states of biologically relevant molecules at interfaces. The results provide guidance for the design of interfaces for water-free biologics.