Hydrogen bond formation between citrate and phosphate ions in spherulites of fluorapatite

Amorphous Calcium Phosphate and Amorphous Calcium Phosphate Carboxylate: Synthesis and Characterization

Amorphous calcium phosphate (ACP) is the first solid phase precipitated from a supersaturated calcium phosphate solution. Naturally, ACP is formed during the initial stages of biomineralization and stabilized by an organic compound. Carboxylic groups containing organic compounds are known to regulate the nucleation and crystallization of hydroxyapatite. Therefore, from a biomimetic point of view, the synthesis of carboxylate ions containing ACP (ACPC) is valuable. Usually, ACP is synthesized with fewer steps than ACPC. The precipitation reaction of ACP is rapid and influenced by pH, temperature, precursor concentration, stirring conditions, and reaction time. Due to phosphates triprotic nature, controlling pH in a multistep approach becomes tedious. Here, we developed a new ACP and ACPC synthesis approach and thoroughly characterized the obtained materials. Results from vibration spectroscopy, nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS), true density, specific surface area, and ion release studies have shown a difference in the physiochemical properties of the ACP and ACPC. Additionally, the effect of a carboxylic ion type on the physiochemical properties of ACPC was characterized. All of the ACPs and ACPCs were synthesized in sterile conditions, and in vitro analysis was performed using MC-3T3E1 cells, revealing the cytocompatibility of the synthesized ACPs and ACPCs, of which the ACPC synthesized with citrate showed the highest cell viability.

Spherulitic Lead Calcium Apatite Minerals in Lead Water Pipes Exposed to Phosphate-Dosed Tap Water

Phosphate dosing is the principle strategy used in the United Kingdom to reduce the concentration of lead in tap waters supplied by lead water pipes. The mechanisms of phosphate-mediated lead control are not fully understood, but solid solutions of lead calcium apatite are thought to play an important role. This study investigated the microstructure of a lead pipe, supplied with high-alkalinity tap water, in which the lead calcium apatite crystals were spherulitic having rounded and dumb-bell-shaped morphologies. XRD, Fourier transform infrared spectroscopy, optical microscopy, Raman spectroscopy, scanning electron microscopy, and energy-dispersive spectroscopy showed that the lead pipe had a well-established inner layer of litharge; a middle layer containing lead calcium apatite spherulites, plumbonacrite, and some hydrocerussite; and an outer layer containing iron, lead, phosphorus, calcium, silicon, and aluminum. It was found that spherulitic lead calcium apatite could be grown in the laboratory by adding hydrocerussite to synthetic soft and hard water-containing phosphate, chloride, and citrate ions at pH 5.5 but not when the citrate was absent. This suggests that dissolved organic molecules might play a role in spherulite formation on lead water pipes. These molecules might inhibit the formation of lead calcium apatite, reducing the effectiveness of phosphate dosing in lead water pipes.

Nuclear Magnetic Resonance and Metadynamics Simulations Reveal the Atomistic Binding of l-Serine and O-Phospho-l-Serine at Disordered Calcium Phosphate Surfaces of Biocements

Interactions between biomolecules and structurally disordered calcium phosphate (CaP) surfaces are crucial for the regulation of bone mineralization by noncollagenous proteins, the organization of complexes of casein and amorphous calcium phosphate (ACP) in milk, as well as for structure-function relationships of hybrid organic/inorganic interfaces in biomaterials. By a combination of advanced solid-state NMR experiments and metadynamics simulations, we examine the detailed binding of O-phospho-l-serine (Pser) and l-serine (Ser) with ACP in bone-adhesive CaP cements, whose capacity of gluing fractured bone together stems from the close integration of the organic molecules with ACP over a subnanometer scale. The proximity of each carboxy, aliphatic, and amino group of Pser/Ser to the Ca²⁺ and phosphate species of ACP observed from the metadynamics-derived models agreed well with results from heteronuclear solid-state NMR experiments that are sensitive to the ¹³C-³¹P and ¹⁵N-³¹P distances. The inorganic/organic contacts in Pser-doped cements are also contrasted with experimental and modeled data on the Pser binding at nanocrystalline HA particles grown from a Pser-bearing aqueous solution. The molecular adsorption is driven mainly by electrostatic interactions between the negatively charged carboxy/phosphate groups and Ca²⁺ cations of ACP, along with H bonds to either protonated or nonprotonated inorganic phosphate groups. The Pser and Ser molecules anchor at their phosphate/amino and carboxy/amino moieties, respectively, leading to an extended molecular conformation across the surface, as opposed to an "upright standing" molecule that would result from the binding of one sole functional group.

Hydrogen Phosphates Play a Critical Structural Role in Amorphous Calcium Phosphates

Amorphous calcium phosphate (ACP) is an intriguing mineral phase of calcium phosphate in its own right, in addition to its relevance in biomineralization. We hereby demonstrate that ACPs prepared by...

Natural vs. Synthetic Phosphate as Efficient Heterogeneous Compounds for Synthesis of Quinoxalines

Natural phosphate (NP) and synthetic fluorapatite phosphate (SFAP) were proposed as stable, inexpensive, readily available and recyclable catalysts for the condensation of 1,2-diamines with 1,2-dicarbonyls in methanol to afford quinoxaline at room temperature. NP provided as high as 92-99% yield for quinoxalines in short reaction times (i.e., 1-45 min), while SFAP created quinoxalines with 87-97% yield in 60-120 min. From the chemical analyses, X-ray fluoresecency, X-ray diffraction, energy dispersive X-ray and Fourier-transform infrared spectroscopy methods, two main phases (CaO, P2O5) appeared in NP together with other low content phases (SiO2, Fe2O3). Compared to other phases, apatite (CaO and P2O5 as Ca10(PO4)6) played a major role in the catalytic activity of NP. SFAP with similar Ca/P atomic ratio showed a relatively lower catalytic activity than NP for the condensation of 1,2-diamine with 1,2-dicarbonyl in methanol at ambient temperature. To investigate the recyclability of catalysts, the surface properties of NP and 6-recycled NP were investigated using scanning electron microscopy, energy dispersive X-ray and Brunauer-Emmett-Teller and Barrett-Joyner-Halenda methods. Some differences were observed in NP and 6-recycled NP's particle size, surface area, the volume and size of pores, and the content of elements; nevertheless, the use-reuse process did not noticeably change the catalytic property of NP.

Evaluation of F, Ca, and P release and microhardness of eleven ion-leaching restorative materials and the recharge efficacy using a new Ca/P containing fluoride varnish

OBJECTIVES

The objectives of this study were to evaluate fluoride (F), calcium (Ca), and phosphate (P) release of ion-leaching restorative materials (ILMs), their recharge efficacy with a Ca/P-containing F varnish, and relative microhardness.

METHODS

Thirteen groups of materials were investigated. Cylindrical-shaped specimens were fabricated. Deionised water or lactic-acid solution were used as the storage media. Solutions were changed after 1d, 4d, 7d, and 14d of ion release and at the same periods after recharge with MI Varnish (7 -h storage). F, Ca, and P measurements were accomplished using a fluoride-ion selective electrode, atomic absorption spectrometry, and colourimetric method by spectrophotometer, respectively. Relative Vickers hardness was proceeded with similar specimens used in the F assay (4 periods). SEM/EDS was additionally performed. Statistical analyses were calculated in each parameter (p < 0.05).

RESULT

Hardness of several ILMs immediately increased after recharge. After 28d, Ketac Universal [a high-viscosity glass-ionomer cement (HVGIC)] showed the highest hardness similar to the resin composite control. Although 2 HVGICs (Zirconomer and Equia Forte Fil) ranked as first and second for F release/re-release, some HVGICs had inferior or comparable F capacity to RMGICs (Fuji VIII and Fuji II LC) and a resin-based (RB) ILM (Cention N). Cention N, Activa-Restorative (RB-ILM), and Zirconomer were the top-3 ranking for Ca release/re-release. Activa-Restorative showed the highest P release, whereas Cention N displayed the greatest recharge ability for P.

CONCLUSIONS

Zirconomer showed a versatile performance for ion-release/re-release, especially for F. Cention N had excellent capacity in relation to Ca release and recharge ability of Ca/P.

CLINICAL SIGNIFICANCE

With the F varnish recharge protocol, Zirconomer, Equia Forte, and Fuji VIII seems to have an ability to inhibit initial caries initiation. Cention N is a promising resin-based material that could be an alternative for high caries risk patients due to the high Ca release/recharge with acceptable F release.

Comparison of the Inhibitory Mechanisms of Diethyl Citrate, Sodium Citrate, and Phosphonoformic Acid on Calcification Induced by High Inorganic Phosphate Contents in Mouse Aortic Smooth Muscle Cells

OBJECTIVE

This study aimed to investigate the differences and inhibitory effects of diethyl citrate (Et2Cit), sodium citrate (Na3Cit), and phosphonoformic acid (PFA) on calcification induced by high inorganic phosphate (Pi) contents in mouse aortic smooth muscle cells (MOVAS) and to develop drugs that can induce anticoagulation and inhibit vascular calcification (VC).

METHODS

Alive and fixed MOVAS were assessed for 14 days in the presence of high Pi with increasing Et2Cit, Na3Cit, and PFA concentrations. Calcification on MOVAS was measured through Alizarin red staining and the deposited calcium amount; apoptosis was detected by annexin V staining; and cell transdifferentiation was examined by measuring smooth muscle lineage gene (α-SMA) expression and alkaline phosphatase activity.

RESULTS

Coincubation of MOVAS with Et2Cit, Na3Cit, and PFA significantly decreased Pi-induced VC in live MOVAS, and the apoptotic rate was reduced by low inhibitor concentrations. The 3 inhibitors could prevent the alkaline phosphatase activity induced by high Pi contents and increased the expression of α-smooth muscle actin genes. Thus, the transdifferentiation of MOVAS into osteoblast-like cells was blocked. Their inhibitory effects exhibited concentration dependence. The inhibitory effect of each inhibitor at the same concentration showed the following trend: PFA > Na3Cit > Et2Cit.

CONCLUSIONS

Et2Cit, Na3Cit, and PFA prevented the calcification of MOVAS and inhibited the osteochondrocytic conversion of vascular smooth muscle cells. Thus, Et2Cit and Na3Cit as anticoagulants may alleviate VC in clinical applications.

Isoexergonic Conformations of Surface-Bound Citrate Regulated Bioinspired Apatite Nanocrystal Growth

The superior biomechanical properties of bone and dentin are dictated, in part, by the unique plate-like morphology of hydroxyapatite (HAP) nanocrysals within a hierarchically assembled collagen matrix. Understanding the mechanism of crystal growth and thus morphology is important to the rational design of bioinspired apatite nanocrystals for orthopedic and dental applications. Citrate has long been proposed to modulate apatite crystal growth, but major questions exist regarding the HAP-bound citrate conformations and the identities of the interacting functional groups and HAP surface sites. Here, we conducted a comprehensive investigation of the mechanism from the angstrom to submicrometer scale by detailed correlation of the results of high-level metadynamics simulations, employing force-fields benchmarked to experiment and density functional theory calculations with the results of high resolution transmission electron microscopy, nuclear magnetic resonance spectroscopy, solution analysis, and thermogravimetric analysis. Crystal morphology changed from needle- to plate-like with increasing citrate concentration. Citrate adsorbed more strongly on the HAP (100) face than on the (001) face, thus resulting in preferential growth in the [001] direction and the plate-like morphology. Two very different bound conformations were obtained, involving interactions of either one or both terminal carboxyl groups with three or five surface calcium ions, respectively, and a hydrogen bond between the citrate hydroxyl and the HAP surface. Remarkably, despite fewer interaction sites in the single bound carboxyl conformation, the structures were isoexergonic, so both exist at equilibrium. Identification of the former conformation is significant because it allows a greater adsorption density than is traditionally assumed and can help explain concentration-dependence of citrate in modulating crystal morphology. These unique results were enabled first by the application of advanced metadynamics, a technique necessary for the accurate simulation of ionic materials but which is rarely employed in the biomaterials and biomineralization fields and second by the detailed correlation of computational, spectroscopic, and analytical results.

A potential mechanism for amino acid-controlled crystal growth of hydroxyapatite

The mineral component of bone, dentin and calcified parts of avian tendon, hydroxyapatite (HAP), has non-stoichiometric composition (idealized as Ca₁₀(PO₄)₆(OH)₂), plate-like morphology and nanometer size. This unique crystal morphology contributes to the physico-chemical and biochemical properties of bone. Thus, understanding the mechanism for the controlled growth of plate-like HAP nanocrystals is significant in the study of bone biomineralization. Previous studies have shown that acidic non-collagenous proteins (ANCPs), which are enriched in the residues of acidic amino acids, may play an important role in HAP crystal growth modulation. In this study, glutamic acid (Glu) and phosphoserine (Ser-OPO₃) were used as model compounds to modify the synthesis of HAP nanocrystals. To identify the mechanisms of amino acids as regulators, X-ray diffraction (XRD), transmission electron microscopy (TEM) and solid state nuclear magnetic resonance (ssNMR) were used. The crystals obtained in the inorganic controls were needle-like, while crystals synthesized in the presence of the amino acids presented a plate-like morphology. The plate-like crystals had a preferred crystal orientation on (300) face, which was lacking in the inorganically grown crystals, indicating preferential adsorption and suppression of growth in specific crystal directions. Ser-OPO₃ was more efficient than Glu in modulating HAP nucleation and crystal growth. Furthermore, NMR revealed interactions between the charged side chain groups in amino acids and the crystal surfaces. These results were successfully explained through our MD simulations for the free energy calculation of amino acid binding on HAP crystal faces. The present study revealed that amino acids may act as effective regulators of HAP morphology without the need to invoke large NCPs in bone biomineralization and in designing bioinspired materials for orthopaedic and dental applications.

An NMR Study of Biomimetic Fluorapatite - Gelatine Mesocrystals

The mesocrystal system fluoroapatite—gelatine grown by double-diffusion is characterized by hierarchical composite structure on a mesoscale. In the present work we apply solid state NMR to characterize its structure on the molecular level and provide a link between the structural organisation on the mesoscale and atomistic computer simulations. Thus, we find that the individual nanocrystals are composed of crystalline fluorapatite domains covered by a thin boundary apatite-like layer. The latter is in contact with an amorphous layer, which fills the interparticle space. The amorphous layer is comprised of the organic matrix impregnated by isolated phosphate groups, Ca₃F motifs and water molecules. Our NMR data provide clear evidence for the existence of precursor complexes in the gelatine phase, which were not involved in the formation of apatite crystals, proving hence theoretical predictions on the structural pre-treatment of gelatine by ion impregnation. The interfacial interactions, which may be described as the glue holding the composite materials together, comprise hydrogen bond interactions with the apatite PO₄³⁻ groups. The reported results are in a good agreement with molecular dynamics simulations, which address the mechanisms of a growth control by collagen fibers, and with experimental observations of an amorphous cover layer in biominerals.

Solid-state NMR studies of proteins immobilized on inorganic surfaces

Solid state NMR is the primary tool for studying the quantitative, site-specific structure, orientation, and dynamics of biomineralization proteins under biologically relevant conditions. Two calcium phosphate proteins, statherin (43 amino acids) and leucine rich amelogenin protein (LRAP; 59 amino acids), have been studied in depth and have different dynamic properties and 2D- and 3D-structural features. These differences make it difficult to extract design principles used in nature for building materials with properties such as high strength, unusual morphologies, or uncommon phases. Consequently, design principles needed for developing synthetic materials controlled by proteins are not clear. Many biomineralization proteins are much larger than statherin and LRAP, necessitating the study of larger biomineralization proteins. More recent studies of the significantly larger full-length amelogenin (180 residues) represent a significant step forward to ultimately investigate the full diversity of biomineralization proteins. Interactions of amino acids, a silaffin derived peptide, and the model LK peptide with silica are also being studied, along with qualitative studies of the organic matrices interacting with calcium carbonate. Dipolar recoupling techniques have formed the core of the quantitative studies, yet the need for isolated spin pairs makes this approach costly and time intensive. The use of multi-dimensional techniques to study biomineralization proteins is becoming more common, methodology which, despite its challenges with these difficult-to-study proteins, will continue to drive future advancements in this area.