Adsorptive characterization of the ZIF-68 metal-organic framework: a complex structure with amphiphilic properties

Customized oxygen-rich biochar with ultrahigh microporosity for ideal solid phase microextraction of substituted benzenes

The synergistic effect of high microporosity and abundant heteroatoms is important for improving the performance of biochar in various fields. However, it is still challenging to create enough micropores for biochar, while simultaneously retaining the heteroatoms from biomass. A series of biochar with variable microstructures was successfully prepared by carbonization and following ball milling on lotus pedicel (LP), watermelon rind (WR), and litchi rind (LR). The pore structures and heteroatoms of biochar were characterized in detail. Notably, high microporosity could be realized by the carbonization of LR, and further ball milling resulted in a higher microporous surface area (1323.4 m²·g^-1) and richer oxygen. Furthermore, the obtained biochar was fabricated as solid phase microextraction (SPME) coatings with uniform morphologies and similar thicknesses to deeply investigate the relationships between the microstructures and extraction performance. The best performance was demonstrated by the LR800BM, with enrichment factors from 1780 to 155,217. Finally, it was coupled with gas chromatography-mass spectrometry (GC-MS) to develop an analytical method with a wide linear range (1-50,000 ng·L^-1), low limits of detection (0.10-1.4 ng·L^-1), good repeatability (0.83 %-7.5 %) and reproducibility (4.2 %-8.9 %). This work provides valuable insights into the structure-performance relationship of biochar, which is important for the design of high-performance biochar-based adsorbents and their applications in the environment.

New insights into hierarchical pore size and level of concentration in efficient removal of toluene vapor by activated carbon

The hierarchical pore structure of nanoporous carbon and gaseous toluene concentration co-mediated adsorption mechanism was examined. The KOH-activated carbons with tailorable high surface area (1126-3148 m²/g), large pore volume (0.446-2.08 cm³/g) and broadening average pore width (0.873-2.68 nm) were prepared. Dynamic adsorption was used to determine breakthrough curves and adsorption isotherms of toluene by as-prepared KOH-activated carbons and commercial activated carbons. The experimental results showed that the breakthrough time is positively correlated with ultramicropore volume of all activated carbons. The equilibrium amounts adsorbed (q_e) for toluene at 100 ppmv were as high as 454 mg/g on KOH-activated carbons. The q_e for toluene at P/P₀ < 0.017 dominated by ultramicropore volume of all activated carbons were attributed to the enhanced superposition of adsorption force field between adjacent ultramicropore walls. A large adsorption affinity is imperative to achieve high amounts adsorbed for toluene at low concentration. The toluene was firstly filled in ultramicropores then gradually occupied in wide micropores at 0.017 <P/P₀ < 0.1 and the q_e were linearly correlated with micropore volume. The q_e of toluene at P/P₀ > 0.1 were linearly correlated with volume of micropore and small mesopore. The governing porosity in adsorbing toluene is varied with the intruding concentration. These results provided new insights into adsorption mechanism and development of novel materials.

Role of molecular size of volatile organic compounds on their adsorption by KOH-activated micro-mesoporous carbon

KOH-activated carbon (KAC) with high surface area and abundant micropores are widely used in adsorbing volatile organic compounds (VOCs). Kinetic diameters (σ) of VOCs are an important factor controlling diffusion of VOCs into pores of adsorbent. Yet the influence of kinetic diameters of VOCs on their adsorption by KAC remains unclear. Here, we investigated the dynamic adsorption of VOCs with various kinetic diameters on a prepared KAC with high surface area of 3100 m²/g, pore volume of 2.08 cm³/g and average pore width (D) of 2.68 nm. Adsorption affinity was negatively correlated with size difference (D-σ), indicating that pore width of adsorbent should close to σ to obtain a strong interaction between VOCs and adsorbents. Amounts adsorbed were positively correlated with σ at low relative pressures (p/p₀ < 0.01), and negatively correlated with σ at high relative pressures (p/p₀ > 0.044). The above results suggest that larger molecules with higher affinities are preferentially adsorbed at low relative pressures, amounts adsorbed of smaller molecules are larger than that of bigger molecules at high relative pressures. This study provided new insights into adsorption mechanisms mediated by σ and the development of next generation adsorbents for efficient removal of VOCs.

Discriminating BTX Molecules by the Nonselective Metal Oxide Sensor-Based Smart Sensing System

Discriminating structurally similar volatile organic compounds (VOCs) molecules, such as benzene, toluene, and three xylene isomers (BTX), remains a significant challenge, especially, for metal oxide semiconductor (MOS) sensors, in which selectivity is a long-standing challenge. Recent progress indicates that temperature modulation of a single MOS sensor offers a powerful route in extracting the features of adsorbed gas analytes than conventional isothermal operation. Herein, a rectangular heating waveform is applied on NiO-, WO₃-, and SnO₂-based sensors to gradually activate the specific gas/oxide interfacial redox reaction and generate rich (electrical) features of adsorbed BTX molecules. Upon several signal preprocessing steps, the intrinsic feature of BTX molecules can be extracted by the linear discrimination analysis (LDA) or convolutional neural network (CNN) analysis. The combination of three distinct MOS sensors noticeably benefits the recognition accuracy (with a reduced number of training iterations). Finally, a prototype of a smart BTX recognition system (including sensing electronics, sensors, Wi-Fi module, UI, PC, etc.) based on temperature modulation has been explored, which enables a prompt, accurate, and stable identification of xylene isomers in the ambient air background and raises the hope of innovating the future advanced machine olfactory system.

Cisplatin uptake and release in pH sensitive zeolitic imidazole frameworks

Cancer remains hard to treat, partially due to the non-specificity of chemotherapeutics. Metal-organic frameworks (MOFs) are promising carriers for targeted chemotherapy, yet, to date, there have been few detailed studies to systematically enhance drug loading while maintaining controlled release. In this work, we investigate which molecular simulation methods best capture the experimental uptake and release of cisplatin from UiO-66 and UiO-66(NH₂). We then screen a series of biocompatible, pH-sensitive zeolitic imidazolate frameworks (ZIFs) for their ability to retain cisplatin in healthy parts of the patient and release it in the vicinity of a tumor. Pure-component GCMC simulations show that the maximum cisplatin loading depends on the pore volume. To achieve this maximum loading in the presence of water, either the pore size needs to be large enough to occupy both cisplatin and its solvation shell or the MOF-cisplatin interaction must be more favorable than the cisplatin-shell interaction. Both solvated and non-solvated simulations show that cisplatin release rates can be controlled by either decreasing the pore limiting diameters or by manipulating framework-cisplatin interaction energies to create strong, dispersed adsorption sites. The latter method is preferable if cisplatin loading is performed from solution into a pre-synthesized framework as weak interaction energies and small pore window diameters will hinder cisplatin uptake. Here, ZIF-82 is most promising. If it is possible to load cisplatin during crystallization, ZIF-11 would outcompete the other MOFs screened as cisplatin cannot pass through its pore windows; therefore, release rates would be purely driven by the pH triggered framework degradation.

Screening Metal-Organic Frameworks for Separation of Binary Solvent Mixtures by Compact NMR Relaxometry

Metal–organic frameworks (MOFs) have great potential as an efficient alternative to current separation and purification procedures of a large variety of solvent mixtures—a critical process in many applications. Due to the huge number of existing MOFs, it is of key importance to identify high-throughput analytical tools, which can be used for their screening and performance ranking. In this context, the present work introduces a simple, fast, and inexpensive approach by compact low-field proton nuclear magnetic resonance (NMR) relaxometry to investigate the efficiency of MOF materials for the separation of a binary solvent mixture. The mass proportions of two solvents within a particular solvent mixture can be quantified before and after separation with the help of a priori established correlation curves relating the effective transverse relaxation times T_2eff and the mass proportions of the two solvents. The new method is applied to test the separation efficiency of powdered UiO-66(Zr) for various solvent mixtures, including linear and cyclic alkanes and benzene derivate, under static conditions at room temperature. Its reliability is demonstrated by comparison with results from ¹H liquid-state NMR spectroscopy.

Stepwise collapse of a giant pore metal-organic framework

Defect engineering is a powerful tool that can be used to tailor the properties of metal-organic frameworks (MOFs). Here, we incorporate defects through ball milling to systematically vary the porosity of the giant pore MOF, MIL-100 (Fe). We show that milling leads to the breaking of metal-linker bonds, generating additional coordinatively unsaturated metal sites, and ultimately causes amorphisation. Pair distribution function analysis shows the hierarchical local structure is partially retained, even in the amorphised material. We find that solvents can be used to stabilise the MIL-100 (Fe) framework against collapse, which leads to a substantial retention of porosity over the non-stabilised material.

Ultrapermeable Organic Solvent Nanofiltration Membranes with Precisely Tailored Support Layers Fabricated Using Thin-Film Liftoff

Thin-film composite (TFC) membranes are favored for precise molecular sieving in liquid-phase separations; they possess high permeability due to the minimal thickness of the active layer and the high porosity of the support layer. However, current TFC membrane fabrication techniques are limited by the available materials for the selective layer and do not demonstrate the level of structural control needed to substantially advance organic solvent nanofiltration (OSN) membrane technology. In this work, we employ the newly developed thin-film lift-off (T-FLO) technique to fabricate polybenzimidazole (PBI) TFC membranes with porous support layers uniquely tailored to OSN. The drop-cast dense PBI selective layers endow the membranes with an almost complete rejection of common small dye molecules. The polymeric support layer is optimized by a combinatorial approach using four different monomers that alter the cross-linking density and polymer chain flexibility of the final composite. These two properties substantially affect the porogen holding capacity of the reticular polymer network, leading to the formation of different macropore structures. With a 150 nm thick PBI selective layer and fine-tuning of the support layer, the resulting membrane achieves stable and superior permeance of 14.0, 11.7, 16.4, 11.4, 17.1, and 19.7 L m^-2 h^-1 bar^-1 for water, ethanol, methanol, isopropanol, tetrahydrofuran (THF), and acetonitrile, respectively.

Velocity Measurements in Channel Gas Flows in the Slip Regime by means of Molecular Tagging Velocimetry

Direct measurements of the slip velocity in rarefied gas flows produced by local thermodynamic non-equilibrium at the wall represent crucial information for the validation of existing theoretical and numerical models. In this work, molecular tagging velocimetry (MTV) by direct phosphorescence is applied to argon and helium flows at low pressures in a 1-mm deep channel. MTV has provided accurate measurements of the molecular displacement of the gas at average pressures of the order of 1 kPa. To the best of our knowledge, this work reports the very first flow visualizations of a gas in a confined domain and in the slip flow regime, with Knudsen numbers up to 0.014. MTV is cross-validated with mass flowrate measurements by the constant volume technique. The two diagnostic methods are applied simultaneously, and the measurements in terms of average velocity at the test section are in good agreement. Moreover, preliminary results of the slip velocity at the wall are computed from the MTV data by means of a reconstruction method.

Hydrophobic Metal-Organic Frameworks: Assessment, Construction, and Diverse Applications

Tens of thousands of metal-organic frameworks (MOFs) have been developed in the past two decades, and only ≈100 of them have been demonstrated as porous and hydrophobic. These hydrophobic MOFs feature not only a rich structural variety, highly crystalline frameworks, and uniform micropores, but also a low affinity toward water and superior hydrolytic stability, which make them promising adsorbents for diverse applications, including humid CO2 capture, alcohol/water separation, pollutant removal from air or water, substrate-selective catalysis, energy storage, anticorrosion, and self-cleaning. Herein, the recent research advancements in hydrophobic MOFs are presented. The existing techniques for qualitatively or quantitatively assessing the hydrophobicity of MOFs are first introduced. The reported experimental methods for the preparation of hydrophobic MOFs are then categorized. The concept that hydrophobic MOFs normally synthesized from predesigned organic ligands can also be prepared by the postsynthetic modification of the internal pore surface and/or external crystal surface of hydrophilic or less hydrophobic MOFs is highlighted. Finally, an overview of the recent studies on hydrophobic MOFs for various applications is provided and suggests the high versatility of this unique class of materials for practical use as either adsorbents or nanomaterials.

The Steric Effect in Green Benzylation of Arenes with Benzyl Alcohol Catalyzed by Hierarchical H-beta Zeolite

For decades the steric effect was still ambiguously understood in catalytic benzylation reactions of arenes with benzyl alcohol, which limited the green synthesis of phenylmethane derivates in industrial scale. This research applies a series of silica–alumina beta zeolites to systematically evaluate factors like catalyst porosity, reactants molecule size, and reaction temperature on catalytic benzylation. First, a suitable hierarchical beta zeolite catalyst was screened out by X-ray powder diffraction, N2 adsorption−desorption, and probe benzylation with p-xylene. In the following substrates expanding study, for a typical benzylation of benzene, it showed extraordinary performance among literature reported ones that the conversion was 98% while selectivity was 90% at 353 K only after 10 min. The steric effect of aromatics with different molecular sizes on benzylation was observed. The reaction activities of four different aromatics followed the order: benzene > toluene > p-xylene > mesitylene. Combined with macroscopic kinetic analysis, this comprehensive study points out for the first time that the nature of this steric effect was dominated by the relative adsorption efficiency of different guest aromatic molecules on the host zeolite surface.

Host-Guest Complexation Using Pillar[5]arene Crystals: Crystal-Structure Dependent Uptake, Release, and Molecular Dynamics of an Alkane Guest

Host-guest complexation has been mainly investigated in solution, and it is unclear how guest molecules access the assembled structures of host and dynamics of guest molecules in the crystal state. In this study, we studied the uptake, release, and molecular dynamics of n-hexane vapor in the crystal state of pillar[5]arenes bearing different substituents. Pillar[5]arene bearing 10 ethyl groups yielded a crystal structure of herringbone-type 1:1 complexes with n-hexane, whereas pillar[5]arene with 10 allyl groups formed 1:1 complexes featuring a one-dimensional (1D) channel structure. For pillar[5]arene bearing 10 benzyl groups, one molecule of n-hexane was located in the cavity of pillar[5]arene, and another n-hexane molecule was located outside of the cavity between two pillar[5]arenes. The substituent-dependent differences in molecular arrangement influenced the uptake, release, and molecular dynamics of the n-hexane guest. The substituent effects were not observed in host-guest chemistry in solution, and these features are unique for the crystal state host-guest chemistry of pillar[5]arenes.

Zeolitic Imidazolate Framework Membranes for Organic Solvent Nanofiltration: A Molecular Simulation Exploration

Organic solvents are intensively used in chemical and pharmaceutical industries. Their separation and recovery account for a significant portion of energy consumption and capital cost in many industrial processes. In this study, three microporous crystalline zeolitic imidazolate frameworks (ZIF-25, ZIF-71, and ZIF-96) are investigated as organic solvent nanofiltration (OSN) membranes by molecular simulations. The fluxes of five solvents (methanol, ethanol, acetone, acetonitrile, and n-hexane) are predicted. Despite the smallest aperture size among the three ZIFs, ZIF-25 exhibits the highest flux for polar solvents (methanol, ethanol, acetone, and acetonitrile) because of its hydrophobic nature, whereas hydrophilic ZIF-96 shows the highest flux for nonpolar n-hexane. The analysis of structural information and interaction energy reveals that the solvent-framework interaction is crucial to determine solvent permeation. Good correlations between solvent permeances and a combination of solvent properties are found. In the presence of a model solute (paracetamol), solvent permeances are marginally affected; moreover, the rejection of paracetamol is 100% for the three ZIF membranes in all five solvents. This study highlights that the pore chemistry, in addition to pore size, plays an important role in solvent permeation, and it suggests that ZIFs are potential OSN membranes for the recovery of organic solvents.

Alkane-length sorting using activated pillar[5]arene crystals

We report a simple and easy-to-operate method for separating n-alkanes: when we immersed activated pillar[5]arene crystals into a mixture of n-alkanes with various chain lengths, the crystals preferentially took up n-alkanes with longer chain lengths.

Shape selective properties of the Al-fumarate metal–organic framework in the adsorption and separation of n-alkanes, iso-alkanes, cyclo-alkanes and aromatic hydrocarbons

Adsorption properties of a wide range of hydrocarbon adsorbates in the Al-fumarate metal–organic framework are reported. Trends in adsorption behaviour are related to the sorbate's molecular properties and as well as the properties of this MOF.

Separation of benzene from mixtures with water, methanol, ethanol, and acetone: highlighting hydrogen bonding and molecular clustering influences in CuBTC

Configurational-bias Monte Carlo (CBMC) simulations are used to establish the potential of CuBTC for separation of water/benzene, methanol/benzene, ethanol/benzene, and acetone/benzene mixtures. For operations under pore saturation conditions, the separations are in favor of molecules that partner benzene; this is due to molecular packing effects that disfavor benzene. CBMC simulations for adsorption of quaternary water/methanol/ethanol/benzene mixtures show that water can be selectively adsorbed at pore saturation, making CuBTC effective in drying applications. Ideal Adsorbed Solution Theory (IAST) calculations anticipate the right hierarchy of component loadings but the quantitative agreement with CBMC mixture simulations is poor for all investigated mixtures. The failure of the IAST to provide reasonable quantitative predictions of mixture adsorption is attributable to molecular clustering effects that are induced by hydrogen bonding between water-water, methanol-methanol, and ethanol-ethanol molecule pairs. There is, however, no detectable hydrogen bonding between benzene and partner molecules in the investigated mixtures. As a consequence of molecular clustering, the activity coefficients of benzene in the mixtures is lowered below unity by one to three orders of magnitude at pore saturation; such drastic reductions cannot be adequately captured by the Wilson model, that does not explicitly account for molecular clustering. Molecular clustering effects are also shown to influence the loading dependence of the diffusivities of guest molecules.

Separating mixtures by exploiting molecular packing effects in microporous materials

We examine mixture separations with microporous adsorbents such as zeolites, metal-organic frameworks (MOFs) and zeolitic imidazolate frameworks (ZIFs), operating under conditions close to pore saturation. Pore saturation is realized, for example, when separating bulk liquid phase mixtures of polar compounds such as water, alcohols and ketones. For the operating conditions used in industrial practice, pore saturation is also attained in separations of hydrocarbon mixtures such as xylene isomers and hexane isomers. Separations under pore saturation conditions are strongly influenced by differences in the saturation capacities of the constituent species; the adsorption is often in favor of the component with the higher saturation capacity. Effective separations are achieved by exploiting differences in the efficiency with which molecules pack within the ordered crystalline porous materials. For mixtures of chain alcohols, the shorter alcohol can be preferentially adsorbed because of its higher saturation capacity. With hydrophilic adsorbents, water can be selectively adsorbed from water-alcohol mixtures. For separations of o-xylene-m-xylene-p-xylene mixtures, the pore dimensions of MOFs can be tailored in such a manner as to allow optimal packing of the isomer that needs to be adsorbed preferentially. Subtle configurational differences between linear and branched alkane isomers result in significantly different packing efficiencies within the pore topology of MFI, AFI, ATS, and CFI zeolites. A common characteristic feature of most separations that are reliant on molecular packing effects is that adsorption and intra-crystalline diffusion are synergistic; this enhances the separation efficiencies in fixed bed adsorbers.

Unraveling the adsorption mechanism of mono- and diaromatics in faujasite zeolite

Monte Carlo simulations are performed to study the adsorption of aromatic molecules (toluene, styrene, o-xylene, m-xylene, p-xylene, 1,3,5-trimethylbenzene, and naphthalene) in all-silica faujasite (FAU) zeolite. For monoaromatics, a two-stage "ideal adsorption" and "insertion adsorption" mechanism is found by careful inspection of locations and distributions of the adsorbed toluene molecules. The validity of this mechanism is confirmed for all monoaromatics considered in the current study. Remarkably, the number of C atoms per unit cell corresponding to the inflection point of adsorbate loading (CI-P) is defined as a valid and convenient characterizing factor in the packing efficiency of monoaromatics in the FAU zeolite. For the case of naphthalene, a type of diaromatic, the three-stage mechanism is proposed, which consists of the first two stages and a third stage of "overideal adsorption". The so-called overideal adsorption is labeled because the naphthalene molecules start to occupy the S site nonideally at loadings that approach saturation, leading to a more localized feature of the adsorbates. The explicit adsorption mechanism can be used to understand the loading dependence of isosteric adsorption heat for the aromatics concerned.

Fluorescent metal–organic framework based on pyrene chromophore for sensing of nitrobenzene

A novel 3D MOF constructed by a dendritic ligand with pyrene chromophore and Mg was synthesized. The MOF shows specific fluorescence response to DMF and can sense nitrobenzene at a low detection level, making this a promising material for detecting explosive substances.

Separation of polar compounds using a flexible metal–organic framework

A flexible metal–organic framework, TetZB, shows remarkable affinity and separation capability of polar compounds (propanol isomers).