Partially crystalline Zn₂GeO₄ nanorod/graphene composites as anode materials for high performance lithium ion batteries

Microwave-Assisted Metal-Organic Frameworks Derived Synthesis of Zn2GeO4 Nanowire Bundles for Lithium-Ion Batteries

Germanium-based multi-metallic-oxide materials have advantages of low activation energy, tunable output voltage, and high theoretical capacity. However, they also exhibit unsatisfactory electronic conductivity, sluggish cation kinetics, and severe volume change, resulting in inferior long-cycle stability and rate performance in lithium-ion batteries (LIBs). To solve these problems, we synthesize metal-organic frameworks derived from rice-like Zn2GeO4 nanowire bundles as the anode of LIBs via a microwave-assisted hydrothermal method, minimizing the particle size and enlarging the cation's transmission channels, as well as, enhancing the electronic conductivity of the materials. The obtained Zn2GeO4 anode exhibits superior electrochemical performance. A high initial charge capacity of 730 mAhg-1 is obtained and maintained at 661 mAhg-1 after 500 cycles at 100 mA g-1 with a small capacity degradation ratio of ~0.02% for each cycle. Moreover, Zn2GeO4 exhibits a good rate performance, delivering a high capacity of 503 mA h g-1 at 5000 mA g-1. The good electrochemical performance of the rice-like Zn2GeO4 electrode can be attributed to its unique wire-bundle structure, the buffering effect of the bimetallic reaction at different potentials, good electrical conductivity, and fast kinetic rate.

Ambiguity in indexing electron diffraction patterns of R 3 crystals

The R 3 space group inherently lacks 2110, m 001 and m_{{\bar 1}10} symmetry operations. However, in crystals with R 3 symmetry, these transformations produce `pseudoplanes' with the same interplanar spacing and angles as the original crystallographic planes, causing a lack of uniqueness in the electron diffraction (ED) pattern. The difference in atomic arrangements of pseudoplanes and original planes is reflected in the intensities of diffraction spots; it is hard to differentiate in standard ED patterns, frequently causing wrong assignment of the zone axes. The implications of this ambiguity in analysis of crystal orientations are discussed in detail and a suitable routine to follow while indexing R 3 ED patterns is proposed.

White Latex: Appealing "Green" Alternative for PVdF in Electrode Manufacturing for Sustainable Li-Ion Batteries

Nowadays, poly(vinylidene fluoride) (PVdF) has been dominantly utilized as a polymeric binder in commercialized Li-ion batteries. However, standardized PVdF-based electrode manufacturing seems cost-intensive and environmentally hazardous, which relies on the usage of toxic N-methyl-2-pyrrolidone (NMP) as a dispersant. In view of cost control and environmental awareness, switching to a water-processable green binder, as a substitute for PVdF, has been imperative with realistic significance. Herein, commercially available white latex (WL), containing poly(vinyl acetate) as a staple ingredient, was directly used as an alternative aqueous binder for PVdF in the fabrication of graphite/Li₄Ti₅O₁₂-based lithium-ion anodes. WL exhibits robust adhesion of the electrode coating to the current collector; meanwhile, the restricted electrolyte swelling of the binder is verified by in situ electrochemical dilatometry. Outperforming PVdF, WL endows graphite with extensive surface coverage by the binding agent, dramatically reducing irreversible decomposition of the electrolyte (SEI formation) on graphite. Consequently, the WL-based graphite anode delivers the highest initial coulombic efficiency (CE) of 92% and remarkable long cyclic stability with a high capacity retention of 332.7 mAh/g, compared to the PVdF- and carboxymethyl cellulose (CMC)-based ones. Moreover, WL is also compatible with Li₄Ti₅O₁₂, endowing it with more stable cycling behavior than that of the counterparts prepared with both PVdF and even CMC. Our described WL represents an appealing "green" alternative for PVdF in manufacturing sustainable and ecofriendly energy storage devices.

Size-controllable synthesis of Zn2GeO4 hollow rods supported on reduced graphene oxide as high-capacity anode for lithium-ion batteries

Germanium-based ternary oxides have aroused wide attention as an anode for high-performance lithium-ion batteries (LIBs). Nevertheless, they usually suffer a large volume expansion and rapid capacity fading during lithiation/delithiation cycles. To address this issue, herein, Zn₂GeO₄/RGO composites are synthesized with Zn₂GeO₄ hollow rods in-situ grown on reduced graphene oxide (RGO) sheets. The Zn₂GeO₄ hollow rods can be facilely adjusted from nano- to micro-size. The lithium storage performances of the composites strongly depend on the size of Zn₂GeO₄ hollow rods and the content of RGO. The optimized Zn₂GeO₄/RGO composite exhibits a pseudocapacitance-dominated Li⁺ storage performance, with a large reversible capacity of 1005 mAh g^-1 after 100 cycles at 0.5 A g^-1, an excellent rate capability (515 mAh g^-1 at a high rate of 5 A g^-1) and a good long cycling stability of 500 cycles with a low capacity loss of 0.05% per cycle at 1 A g^-1. The outstanding electrochemical performance can be attributed to the unique composition and microstructure of the material as well as the synergistic effect of the conductive RGO sheets and the hollow Zn₂GeO₄ nanostructure. This work provides a promising anode for high-performance LIBs and a useful inspiration for further improving the Ge-based ternary oxide anodes.

SnS2 Nanocrystalline-Anchored Three-Dimensional Graphene for Sodium Batteries with Improved Rate Performance

Tin disulfide (SnS₂) is regarded as one of the most suitable candidates as the electrode material for sodium-ion batteries (SIBs). However, the easy restacking and volume expansion properties of SnS₂ during the charge/discharge process lead to the destruction of the electrode structure and a decrease in capacity. We successfully synthesized a SnS₂ nanocrystalline-anchored three-dimensional porous graphene composite (SnS₂/3DG) by combining hydrothermal and high-temperature reduction methods. The SnS₂ nanocrystalline was uniformly dispersed within the connected reduced graphene oxide matrix. The SnS₂/3DG battery showed a high reversible capacity of 430 mAh/g after 50 cycles at 100 mA/g. The SnS₂/3DG composite showed an excellent rate capability with the current density increasing from 100 mA/g to 2 A/g. The excellent performance of the novel SnS₂/3DG composite is attributed to the porous structure, which not only promoted the infiltration of electrolytes and hindered volume expansion for the porous structure, but also improved the conductivity of the whole electrode, demonstrating that the SnS₂/3DG composite is a prospective anode for the next generation of sodium-ion batteries.

Decoding of Oxygen Network Distortion in a Layered High-Rate Anode by In Situ Investigation of a Single Microelectrode

Sluggish conversion reactions severely impair the rate capability for lithium storage, which is the main disadvantage of the conversion-type anode materials. Here, the microplatform based on a single microelectrode is designed and utilized for the fundamental understanding of the conversion reaction. The kinetic-favorable layered structure of the anode material is on-site synthesized in the microplatform. The in situ characterization reveals that introducing an oxygen network distortion in the layered oxide anode effectively circumvents the severe passivation of the electrode material by lithium oxide, thus leading to highly reversible conversion reactions. As a result, the high-rate capability of the conversion-type anode materials is realized. The on-site synthesis strategy is further applied in the large-scale synthesis of nanomaterials for lithium-ion batteries. As such, oxide nanorods with the layered structure are synthesized by a facile chemical strategy, showing high rate performance (574 mAh g^-1 at 10 A g^-1). This work unveils the beneficial effect of oxygen network distortion in the layered anode for conversion reactions over cycling, thus providing an alternative strategy to enhance the rate capability of conversion-type anodes for lithium storage.

Graphene oxide wrapped Cu3V2O7(OH)2 · 2H2O nanocomposite with enhanced electrochemical performance for lithium-ion storage

Transition metal oxides (TMOs) are widely accepted as one of the alternatives for the graphite anode in lithium-ion batteries (LIBs) owing to the high specific capacity and facile synthesis of nanoscale materials facilitating fast ionic transfer. However, the lower electronic conductivity always impedes the application of TMOs. Herein, we report a graphene oxide wrapped layer-structured Cu₃V₂O₇(OH)₂ · 2H₂O nanocomposite (CVO/GO) synthesized via an in situ co-precipitation method. It is corroborated that the introduction of GO not only provides more active sites for lithium-ion storage, but also improves the charge transfer rate of the electrode, issuing an enhanced electrochemical performance. As expected, the CVO/GO nanocomposite exhibits an ultrahigh specific capacity of 870 mA h g^-1 at 0.1 A g^-1 compared with CVO nanoparticles. Even at a high current density of 5 A g^-1, a specific capacity of 158 mA h g^-1 could be achieved for the CVO/GO nanocomposite.

CTAB-assisted growth of self-supported Zn2GeO4 nanosheet network on a conductive foam as a binder-free electrode for long-life lithium-ion batteries

The Ge-based compounds show great potential as replacements for traditional graphite anode in lithium-ion batteries (LIBs). However, large volume changes and low conductivity of such materials result in a poor electrochemical cycling and rate performance. Herein, we fabricate a self-supported and three-dimensional (3D) sponge-like structure of interlinked Zn₂GeO₄ ultrathin nanosheets anchored vertically on a nickel foam (ZGO NSs@NF) via a simple hydrothermal process assisted by cetyltrimethyl ammonium bromide (CTAB). Such robust self-supported hybrid structures greatly improve the structural tolerance of the active materials and accommodate the volume variation that occurs during repeated electrochemical cycling. As expected, the self-supported ZGO NSs@NF composites demonstrate an excellent lithium storage with a high discharge capacity, a long cycling life, and a good rate capability when used as binder-free anodes for LIBs. A high reversible discharge capacity of 794 mA h g^-1 is maintained after 500 cycles at 200 mA g^-1, corresponding to 81% capacity retention of the second cycle. Further evaluation at a higher current density (2 A g^-1) also delivers a reversible discharge capacity (537 mA h g^-1) for this binder-free anode. This novel 3D structure of the self-supported ultrathin nanosheets on a conductive substrate, with its volume buffer effect and good interfacial contacts, can stimulate the progress of other energy-efficient technologies.

Advances in Subcritical Hydro-/Solvothermal Processing of Graphene Materials

Many promising graphene-based materials are kept away from mainstream applications due to problems of scalability and environmental concerns in their processing. Hydro-/solvothermal techniques overwhelmingly satisfy both the aforementioned criteria, and have matured as alternatives to wet-chemical methods with advances made over the past few decades. The insolubility of graphene in many solvents poses considerable difficulties in their processing. In this context hydro-/solvothermal techniques present an ideal opportunity for processing of graphenic materials with their versatility in manipulating the physical and thermodynamic properties of the solvent. The flexibility in hydro-/solvothermal techniques for manipulation of solvent composition, temperature and pressure provides numerous handles to manipulate graphene-based materials during synthesis. This review provides a comprehensive look at the subcritical hydro-/solvothermal synthesis of graphene-based functional materials and their applications. Several key synthetic strategies governing the morphology and properties of the products such as temperature, pressure, and solvent effects are elaborated. Advances in the synthesis, doping, and functionalization of graphene in hydro-/solvothermal media are highlighted together with our perspectives in the field.

Hierarchical Structural Evolution of Zn2GeO4 in Binary Solvent and Its Effect on Li-ion Storage Performance

Zinc germinate (Zn₂GeO₄) with a hierarchical structure was successfully synthesized in a binary ethylenediamine/water (En/H₂O) solvent system by wet chemistry methods. The morphological evolution process of the Zn₂GeO₄ was investigated in detail by tuning the ratio of En to H₂O in different solvent systems, and a series of compounds with awl-shaped, fascicular, and cross-linked hierarchical structures was obtained and employed as anode materials in lithium-ion batteries. The materials with fascicular structure exhibited excellent electrochemical performance, and a specific reversible capacity of 1034 mA h g^-1 was retained at a current density of 0.5 A g^-1 after 160 cycles. In addition, the as-prepared nanostructured electrode also delivered impressive rate capability of 315 mA h g^-1 at the current density of 10 A g^-1. The remarkable electrochemical performances could be ascribed to the following aspects. First, each unit in the three-dimensional fascicular structure can effectively buffer the volume expansions during the Li⁺ extraction/insertion process, accommodate the strain induced by the volume variation, and stabilize its whole configuration. Meanwhile, the small fascicular units can enlarge the electrode/electrolyte contact area and form an integrated interlaced conductive network which provides continuous electron/ion pathways.

Novel high-efficiency visible-light responsive Ag4(GeO4) photocatalyst

The existence of an internal electric field promotes the separation of generated carriers and enhances the photocatalytic activity of polar materials.

Carbon-Free Porous Zn2GeO4 Nanofibers as Advanced Anode Materials for High-Performance Lithium Ion Batteries

In this work, carbon-free, porous, and micro/nanostructural Zn₂GeO₄ nanofibers (p-ZGONFs) have been prepared via a dissolution-recrystallization-assisted electrospinning technology. The successful electrospinning to fabricate the uniform p-ZGONFs mainly benefits from the preparation of completely dissolved solution, which avoids the sedimentation of common Ge-containing solid-state precursors. Electrochemical tests demonstrate that the as-prepared p-ZGONFs exhibit superior Li-storage properties in terms of high initial reversible capacity of 1075.6 mA h g^-1, outstanding cycling stability (no capacity decay after 130 cycles at 0.2 A g^-1), and excellent high-rate capabilities (e.g., still delivering a capacity of 384.7 mA h g^-1 at a very high current density of 10 A g^-1) when used as anode materials for lithium ion batteries (LIBs). All these Li-storage properties are much better than those of Zn₂GeO₄ nanorods prepared by a hydrothermal process. The much enhanced Li-storage properties should be attributed to its distinctive structural characteristics including the carbon-free composition, plentiful pores, and macro/nanostructures. Carbon-free composition promises its high theoretical Li-storage capacity, and plentiful pores cannot only accommodate the volumetric variations during the successive lithiation/delithiation but can also serve as the electrolyte reservoirs to facilitate Li interaction with electrode materials.

Bottom-up Approach Design, Band Structure, and Lithium Storage Properties of Atomically Thin γ-FeOOH Nanosheets

As a novel class of soft matter, two-dimensional (2D) atomic nanosheet-like crystals have attracted much attention for energy storage devices due to the fact that nearly all of the atoms can be exposed to the electrolyte and involved in redox reactions. Herein, atomically thin γ-FeOOH nanosheets with a thickness of ∼1.5 nm are synthesized in a high yield, and the band and electronic structures of the γ-FeOOH nanosheet are revealed using density-functional theory calculations for the first time. The rationally designed γ-FeOOH@rGO composites with a heterostacking structure are used as an anode material for lithium-ion batteries (LIBs). A high reversible capacity over 850 mAh g(-1) after 100 cycles at 200 mA g(-1) is obtained with excellent rate capability. The remarkable performance is attributed to the ultrathin nature of γ-FeOOH nanosheets and 2D heterostacking structure, which provide the minimized Li(+) diffusion length and buffer zone for volume change. Further investigation on the Li storage electrochemical mechanism of γ-FeOOH@rGO indicates that the charge-discharge processes include both conversion reaction and capacitive behavior. This synergistic effect of conversion reaction and capacitive behavior originating from 2D heterostacking structure casts new light on the development of high-energy anode materials.

Structure Interlacing and Pore Engineering of Zn2GeO4 Nanofibers for Achieving High Capacity and Rate Capability as an Anode Material of Lithium Ion Batteries

An interlaced Zn2GeO4 nanofiber network with continuous and interpenetrated mesoporous structure was prepared using a facile electrospinning method followed by a thermal treatment. The mesoporous structure in Zn2GeO4 nanofibers is directly in situ constructed by the decomposition of polyvinylpyrolidone (PVP), while the interlaced nanofiber network is achieved by the mutual fusion of the junctions between nanofibers in higher calcination temperatures. When used as an anode material in lithium ion batteries (LIBs), it exhibits superior lithium storage performance in terms of specific capacity, cycling stability, and rate capability. The pore engineering and the interlaced network structure are believed to be responsible for the excellent lithium storage performance. The pore structure allows for easy diffusion of electrolyte, shortens the pathway of Li(+) transport, and alleviates large volume variation during repeated Li(+) extraction/insertion. Moreover, the interlaced network structure can provide continuous electron/ion pathways and effectively accommodate the strain induced by the volume change during the electrochemical reaction, thus maintaining structural stability and mechanical integrity of electrode materials during lithiation/delithiation process. This strategy in current work offers a new perspective in designing high-performance electrodes for LIBs.

Green synthesis of GeO2/graphene composites as anode material for lithium-ion batteries with high capacity

A facile green solution route using only GeO₂ powder, graphene oxide and purified water has been developed to prepare a GeO₂/graphene composite, in which the GeO₂ particles are wrapped in graphene nanosheets.

An overview of AB2O4- and A2BO4-structured negative electrodes for advanced Li-ion batteries

Energy-storage devices are state-of-the-art devices with many potential technical and domestic applications.