Modulating the lateral tension of solvent-free pore-spanning membranes

Mechanics of biomimetic free-standing lipid membranes: insights into the elasticity of complex lipid compositions

The creation of free-standing lipid membranes has been so far of remarkable interest to investigate processes occurring in the cell membrane since its unsupported part enables studies in which it is important to maintain cell-like physicochemical properties of the lipid bilayer, that nonetheless depend on its molecular composition. In this study, we prepare pore-spanning membranes that mimic the composition of plasma membranes and perform force spectroscopy indentation measurements to unravel mechanistic insights depending on lipid composition. We show that this approach is highly effective for studying the mechanical properties of such membranes. Furthermore, we identify a direct influence of cholesterol and sphingomyelin on the elasticity of the bilayer and adhesion between the two leaflets. Eventually, we explore the possibilities of imaging in the unsupported membrane regions. For this purpose, we investigate the adsorption and movement of a peripheral protein, the fibroblast growth factor 2, on the complex membrane.

Pore-spanning membranes as a tool to investigate lateral lipid membrane heterogeneity

Over the years, it has become more and more obvious that lipid membranes show a very complex behavior. This behavior arises in part from the large number of different kinds of lipids and proteins and how they dynamically interact with each other. In vitro studies using artificial membrane systems have shed light on the heterogeneity based on lipid-lipid interactions in multicomponent bilayer mixtures. Inspired by the raft hypothesis, the coexistence of liquid-disordered (ld) and liquid-ordered (lo) phases has drawn much attention. It was shown that ternary lipid mixtures containing low- and high-melting temperature lipids and cholesterol can phase separate into a lo phase enriched in the high-melting lipids and cholesterol and a ld phase enriched in the low-melting lipids. Depending on the model membrane system under investigation, different domain sizes, shapes, and mobilities have been found. Here, we describe how to generate phase-separated lo/ld phases in model membrane systems termed pore-spanning membranes (PSMs). These PSMs are prepared on porous silicon substrates with pore sizes in the micrometer regime. A proper functionalization of the top surface of the substrates is required to achieve the spreading of giant unilamellar vesicles (GUVs) to obtain PSMs. Starting with lo/ld phase-separated GUVs lead to membrane heterogeneities in the PSMs. Depending on the functionalization strategy of the top surface of the silicon substrate, different membrane heterogeneities are observed in the PSMs employing fluorescence microscopy. A quantitative analysis of the heterogeneity as well as the dynamics of the lipid domains is described.

From LUVs to GUVs─How to Cover Micrometer-Sized Pores with Membranes

Pore-spanning membranes (PSMs) are a versatile tool to investigate membrane-confined processes in a bottom-up approach. Pore sizes in the micrometer range are most suited to visualize PSMs using fluorescence microscopy. However, the preparation of these PSMs relies on the spreading of giant unilamellar vesicles (GUVs). GUV production faces several limitations. Thus, alternative ways to generate PSMs starting from large or small unilamellar vesicles that are more reproducibly prepared are highly desirable. Here we describe a method to produce PSMs obtained from large unilamellar vesicles, making use of droplet-stabilized GUVs generated in a microfluidic device. We analyzed the lipid diffusion in the free-standing and supported parts of the PSMs using z-scan fluorescence correlation spectroscopy and fluorescence recovery after photobleaching experiments in combination with finite element simulations. Employing atomic force indentation experiments, we also investigated the mechanical properties of the PSMs. Both lipid diffusion constants and lateral membrane tension were compared to those obtained on PSMs derived from electroformed GUVs, which are known to be solvent- and detergent-free, under otherwise identical conditions. Our results demonstrate that the lipid diffusion, as well as the mechanical properties of the resulting PSMs, is almost unaffected by the GUV formation procedure but depends on the chosen substrate functionalization. With the new method in hand, we were able to reconstitute the syntaxin-1A transmembrane domain in microfluidic GUVs and PSMs, which was visualized by fluorescence microscopy.

In vitro single vesicle fusion assays based on pore-spanning membranes: merits and drawbacks

Neuronal fusion mediated by soluble N-ethylmaleimide-sensitive-factor attachment protein receptors (SNAREs) is a fundamental cellular process by which two initially distinct membranes merge resulting in one interconnected structure to release neurotransmitters into the presynaptic cleft. To get access to the different stages of the fusion process, several in vitro assays have been developed. In this review, we provide a short overview of the current in vitro single vesicle fusion assays. Among those assays, we developed a single vesicle assay based on pore-spanning membranes (PSMs) on micrometre-sized pores in silicon, which might overcome some of the drawbacks associated with the other membrane architectures used for investigating fusion processes. Prepared by spreading of giant unilamellar vesicles with reconstituted t-SNAREs, PSMs provide an alternative tool to supported lipid bilayers to measure single vesicle fusion events by means of fluorescence microscopy. Here, we discuss the diffusive behaviour of the reconstituted membrane components as well as that of the fusing synthetic vesicles with reconstituted synaptobrevin 2 (v-SNARE). We compare our results with those obtained if the synthetic vesicles are replaced by natural chromaffin granules under otherwise identical conditions. The fusion efficiency as well as the different fusion states observable in this assay by means of both lipid mixing and content release are illuminated.

Lipid membranes supported by planar porous substrates

Biological membranes play key roles in cell life, but their intrinsic complexity motivated the study and development of artificial lipid membranes with the primary aim to reconstitute and understand the natural functions in vitro. Porous-supported lipid membrane (pSLM) has emerged as a flexible platform for studying the surface chemistry of the cell due to their high stability and fluidity, and their ability to study the transmembrane process of the molecules. In this review, the pSLM, for the first time, to our knowledge, was divided into three types according to the way of the porous materials support the lipid membrane, containing the lipid membrane on the pores of the porous materials, the lipid membrane on both sides of the porous materials, the lipid membrane in the pores of the porous materials. All of these pSLMs were systematically elaborated from several aspects, including the substrates, formation, and characterization. Meanwhile, the advantages and disadvantages of each model membranes were summarized. Finally, suggestions for selecting appropriate pSLM and future directions in this area are discussed.

Phase separation in pore-spanning membranes induced by differences in surface adhesion

A porous scaffold providing different adhesion energies alters the behaviour of coexisting phases in lipid membranes considerably.

Continuous Pore-Spanning Lipid Bilayers on Silicon Oxide-Coated Porous Substrates

A number of techniques has been developed and analyzed in recent years to generate pore-spanning membranes (PSMs). While quite a number of methods rely on nanoporous substrates, only a few use micrometer-sized pores to be able to individually resolve suspending membranes by means of fluorescence microscopy. To be able to produce PSMs on pores that are micrometer in size, an orthogonal functionalization strategy resulting in a hydrophilic surface is highly desirable. Here, we report on a method to prepare PSMs based on the evaporation of a thin layer of silicon monoxide on top of the porous substrate. PM-IRRAS experiments demonstrate that the final surface is composed of SiO_x with 1 < x < 2. The hydrophilic surface turned out to be well suited to spread giant unilamellar vesicles forming PSMs. As the method does not rely on a gold coating as frequently used for orthogonal functionalization, fluorescence micrographs provide information not only from the freestanding membrane areas but also from the supported ones. The observation of the entire PSM area enabled us to observe phase-separation in these membranes on the freestanding and supported parts as well as protein binding and possible lipid reorganization of the membranes induced by binding of the protein Shiga toxin.

Elastic Properties of Pore-Spanning Apical Cell Membranes Derived from MDCK II Cells

The mechanical response of adherent, polarized cells to indentation is frequently attributed to the presence of an endogenous actin cortex attached to the inner leaflet of the plasma membrane. Here, we scrutinized the elastic properties of apical membranes separated from living cells and attached to a porous mesh in the absence of intracellular factors originating from the cytosol, organelles, the substrate, neighbors, and the nucleus. We found that a tension-based model describes the data very well providing essentially the prestress of the shell generated by adhesion of the apical membrane patches to the pore rim and the apparent area compressibility modulus, an intrinsic elastic modulus modulated by the surface excess stored in membrane reservoirs. Removal of membrane-associated proteins by proteases decreases the area compressibility modulus, whereas fixation and cross-linking of proteins with glutaraldehyde increases it.

Size and mobility of lipid domains tuned by geometrical constraints

In the plasma membrane of eukaryotic cells, proteins and lipids are organized in clusters, the latter ones often called lipid domains or "lipid rafts." Recent findings highlight the dynamic nature of such domains and the key role of membrane geometry and spatial boundaries. In this study, we used porous substrates with different pore radii to address precisely the extent of the geometric constraint, permitting us to modulate and investigate the size and mobility of lipid domains in phase-separated continuous pore-spanning membranes (PSMs). Fluorescence video microscopy revealed two types of liquid-ordered (l_o) domains in the freestanding parts of the PSMs: (i) immobile domains that were attached to the pore rims and (ii) mobile, round-shaped l_o domains within the center of the PSMs. Analysis of the diffusion of the mobile l_o domains by video microscopy and particle tracking showed that the domains' mobility is slowed down by orders of magnitude compared with the unrestricted case. We attribute the reduced mobility to the geometric confinement of the PSM, because the drag force is increased substantially due to hydrodynamic effects generated by the presence of these boundaries. Our system can serve as an experimental test bed for diffusion of 2D objects in confined geometry. The impact of hydrodynamics on the mobility of enclosed lipid domains can have great implications for the formation and lateral transport of signaling platforms.

Fabrication of Au-Nanoparticle-Embedded Lipid Bilayer Membranes Supported on Solid Substrates

We fabricated gold nanoparticle (Au-NP)-embedded supported lipid bilayers (SLBs) by two methods. In the vesicle-vesicle fusion method, vesicles with hydrophobized Au-NPs are ruptured and fused on SiO₂/Si substrates. In the vesicle-membrane fusion method, SLBs without Au-NPs were preformed on the substrate and then vesicles with Au-NPs were fused into the preformed membranes. In the former method, Au-NP incorporation into the SLBs was observed as an increase in the membrane thickness in atomic force microscopy (AFM) images and directly observed by transmission electron microscopy. In the latter method, fusion of vesicles into the preformed membranes was confirmed by the fluorescent color change in the preformed membranes, and Au-NP incorporation was also confirmed by an increase in the membrane thickness in the AFM images. Key techniques for the successful vesicle-membrane fusion are hydrophobization of Au-NPs, approach control of vesicles by mixing the charged lipids, and destabilization of the lipid bilayers by adding lipids with a small polar headgroup.

Resolving single membrane fusion events on planar pore-spanning membranes

Even though a number of different in vitro fusion assays have been developed to analyze protein mediated fusion, they still only partially capture the essential features of the in vivo situation. Here we established an in vitro fusion assay that mimics the fluidity and planar geometry of the cellular plasma membrane to be able to monitor fusion of single protein-containing vesicles. As a proof of concept, planar pore-spanning membranes harboring SNARE-proteins were generated on highly ordered functionalized 1.2 μm-sized pore arrays in Si₃N₄. Full mobility of the membrane components was demonstrated by fluorescence correlation spectroscopy. Fusion was analyzed by two color confocal laser scanning fluorescence microscopy in a time resolved manner allowing to readily distinguish between vesicle docking, intermediate states such as hemifusion and full fusion. The importance of the membrane geometry on the fusion process was highlighted by comparing SNARE-mediated fusion with that of a minimal SNARE fusion mimetic.

Mechanics of lipid bilayers: What do we learn from pore-spanning membranes?

The mechanical properties of biological membranes have become increasingly important not only from a biophysical viewpoint but also as they play a substantial role in the information transfer in cells and tissues. This minireview summarizes some of our recent understanding of the mechanical properties of artificial model membranes with particular emphasis on membranes suspending an array of pores, so called pore-spanning membranes. A theoretical description of the mechanical properties of these membranes might pave the way to biophysically describe and understand the complex behavior of native biological membranes. This article is part of a Special Issue entitled: Mechanobiology.