Pyranine-induced micellization of poly(ethylene glycol)-block-poly(4-vinylpyridine) and pH-triggered release of pyranine from the complex micelles

pH-Responsive Poly(ethylene glycol)-b-poly(2-vinylpyridine) Micelles for the Triggered Release of Therapeutics

The use of pH-responsive polymeric micelles is a promising approach to afford the targeted, pH-mediated delivery of hydrophobic drugs within the low-pH tumour milieu and intracellular organelles of cancer cells. However, even for a common pH-responsive polymeric micelle system-e.g., those utilising poly(ethylene glycol)-b-poly(2-vinylpyridine) (PEG-b-PVP) diblock copolymers-there is a lack of available data describing the compatibility of hydrophobic drugs, as well as the relationships between copolymer microstructure and drug compatibility. Furthermore, synthesis of the constituent pH-responsive copolymers generally requires complex temperature control or degassing procedures that limit their accessibility. Herein we report the facile synthesis of a series of diblock copolymers via visible-light-mediated photocontrolled reversible addition-fragmentation chain-transfer polymerisation, with a constant PEG block length (90 repeat units (RUs)) and varying PVP block lengths (46-235 RUs). All copolymers exhibited narrow dispersity values (Đ ≤ 1.23) and formed polymeric micelles with low polydispersity index (PDI) values (typically <0.20) at physiological pH (7.4), within a suitable size range for passive tumour targeting (<130 nm). The encapsulation and release of three hydrophobic drugs (cyclin-dependent kinase inhibitor (CDKI)-73, gossypol, and doxorubicin) were investigated in vitro at pH 7.4-4.5 to simulate drug release within the tumour milieu and cancer cell endosome. Marked differences in drug encapsulation and release were observed when the PVP block length was increased from 86 to 235 RUs. With a PVP block length of 235 RUs, the micelles exhibited differing encapsulation and release properties for each drug. Minimal release was observed for doxorubicin (10%, pH 4.5) and CDKI-73 exhibited moderate release (77%, pH 4.5), whereas gossypol exhibited the best combination of encapsulation efficiency (83%) and release (91% pH 4.5) overall. These data demonstrate the drug selectivity of the PVP core, where both the block molecular weight and hydrophobicity of the core (and accordingly the hydrophobicity of the drug) have a significant effect on drug encapsulation and release. These systems remain a promising means of achieving targeted, pH-responsive drug delivery-albeit for select, compatible hydrophobic drugs-which warrants their further investigation to develop and evaluate clinically relevant micelle systems.

Spatiotemporal Control of Supramolecular Polymerization and Gelation of Metal-Organic Polyhedra

In coordination-based supramolecular materials such as metallogels, simultaneous temporal and spatial control of their assembly remains challenging. Here, we demonstrate that the combination of light with acids as stimuli allows for the spatiotemporal control over the architectures, mechanical properties, and shape of porous soft materials based on metal-organic polyhedra (MOPs). First, we show that the formation of a colloidal gel network from a preformed kinetically trapped MOP solution can be triggered upon addition of trifluoroacetic acid (TFA) and that acid concentration determines the reaction kinetics. As determined by time-resolved dynamic light scattering, UV-vis absorption, and ¹H NMR spectroscopies and rheology measurements, the consequences of the increase in acid concentration are (i) an increase in the cross-linking between MOPs; (ii) a growth in the size of the colloidal particles forming the gel network; (iii) an increase in the density of the colloidal network; and (iv) a decrease in the ductility and stiffness of the resulting gel. We then demonstrate that irradiation of a dispersed photoacid generator, pyranine, allows the spatiotemporal control of the gel formation by locally triggering the self-assembly process. Using this methodology, we show that the gel can be patterned into a desired shape. Such precise positioning of the assembled structures, combined with the stable and permanent porosity of MOPs, could allow their integration into devices for applications such as sensing, separation, catalysis, or drug release.

Biodegradable PEI modified complex micelles as gene carriers with tunable gene transfection efficiency for ECs

In recent years, gene therapy has evoked an increasing interest in clinical treatments of coronary diseases because it is a potential strategy to realize rapid endothelialization of artificial vascular grafts. The balance of high transfection efficiency and low cytotoxicity of nonviral gene carriers is an important issue to be solved. In this study, we aim to establish a gene delivery system offering an elegant way to tune the transfection activity and cytotoxicity. Biodegradable complex micelles were prepared from polyethylenimine-b-poly(lactide-co-3(S)-methyl-morpholine-2,5-dione)-b-polyethylenimine (PEI-b-PLMD-b-PEI) and methoxy-poly(ethylene glycol)-b-poly(lactide-co-3(S)-methyl-morpholine-2,5-dione) (mPEG-b-PLMD) copolymers by a co-assembly method. Then the ZNF580 gene plasmid (pDNA) was encapsulated into the complex micelles. The hydrodynamic size and zeta potential of these complex micelles and micelles/pDNA complexes indicated that they were feasible for use in cellular uptake and gene transfection. As expected, the transfection efficiency and cytotoxicity of these micelles/pDNA complexes could be conveniently tuned by changing the mass ratio of mPEG-b-PLMD to PEI-b-PLMD-b-PEI (3/1, 2/2, 1/3 and 0/4) in the mixed mPEG/PEI shell. The transfection efficiency increased as the mass ratio of mPEG-b-PLMD/PEI-b-PLMD-b-PEI decreased from 3/1 to 0/4, while the cytotoxicity showed an opposite tendency. Moreover, ZNF580 protein expression determined by Western blot analysis and the migration of transfected endothelial cells (ECs) by wound healing assay were consistent with the result of transfection efficiency. All these results indicated that the co-assembled complex micelles could act as suitable gene carriers with tunable gene transfection efficiency and cytotoxicity, which should have great potential for the transfection of vascular ECs.

Steroidal Surfactants: Detection of Premicellar Aggregation, Secondary Aggregation Changes in Micelles, and Hosting of a Highly Charged Negative Substance

CHAPSO and CHAPS are zwitterionic surfactants derived from bile salts which are usually employed in protein purification and for the preparation of liposomes and bicelles. Despite their spread use, there are significant discrepancies on the critical concentrations that determine their aggregation behavior. In this work, we study the interaction between these surfactants with the negative fluorescent dye pyranine (HPTS) by absorbance, fluorescence, and infrared spectrometry to establish their concentration-dependent aggregation. For the studied surfactants, we detect three critical concentrations showing their concentration-dependent presence as a monomeric form, premicellar aggregates, micelles, and a second type of micelle in aqueous medium. The nature of the interaction of HPTS with the surfactants was studied using analogues of their tails and the negative bile salt taurocholate (TC) as reference for the sterol ring. The results indicate that the chemical groups involved are the hydroxyl groups of the polar face of the sterol ring and the sulfonate groups of the dye. This interaction causes not only the incorporation of the negative dye in CHAPSO and CHAPS micelles but also its association with their premicellar aggregates. Surprisingly, this hosting behavior for a negative charged molecule was also detected for the negative bile salt TC, bypassing, in this way, the electrostatic repulsion between the guest and the host.

Glucose-responsive polymer vesicles templated by α-CD/PEG inclusion complex

Polymeric nanoparticles with glucose-responsiveness are of great interest in developing a self-regulated drug delivery system. In this work, glucose-responsive polymer vesicles were fabricated based on the complexation between a glucosamine (GA)-containing block copolymer PEG45-b-P(Asp-co-AspGA) and a phenylboronic acid (PBA)-containing block copolymer PEG114-b-P(Asp-co-AspPBA) with α-CD/PEG45 inclusion complex as the sacrificial template. The obtained polymer vesicles composed of cross-linked P(Asp-co-AspGA)/P(Asp-co-AspPBA) layer as wall and PEG chains as both inner and outer coronas. The vesicular morphology was observed by transmission electron microscopy (TEM), and the glucose-responsiveness was investigated by monitoring the variations of hydrodynamic diameter (Dh) and light scattering intensity (LSI) in the polymer vesicle solution with glucose using dynamic light scattering (DLS). Vancomycin as a model drug was encapsulated in the polymer vesicles and sugar-triggered drug release was carried out. This kind of polymer vesicle may be a promising candidate for glucose-responsive drug delivery.

On the stability and morphology of complex coacervate core micelles: from spherical to wormlike micelles

We present a systematic study of the stability and morphology of complex coacervate core micelles (C3Ms) formed from poly(acrylic acid) (PAA) and poly(N-methyl-2-vinylpyridinium)-b-poly(ethylene oxide) (PM2VP-b-PEO). We use polarized and depolarized dynamic and static light scattering, combined with small-angle X-ray scattering, to investigate how the polymer chain length and salt concentration affect the stability, size, and shape of these micelles. We show that C3Ms are formed in aqueous solution below a critical salt concentration, which increases considerably with increasing PAA and PM2VP length and levels off for long chains. This trend is in good agreement with a mean-field model of polyelectrolyte complexation based on the Voorn-Overbeek theory. In addition, we find that salt induces morphological changes in C3Ms when the PAA homopolymer is sufficiently short: from spherical micelles with a diameter of several tens of nanometers at low salt concentration to wormlike micelles with a contour length of several hundreds of nanometers just before the critical salt concentration. By contrast, C3Ms of long PAA homopolymers remain spherical upon addition of salt and shrink slightly. A critical review of existing literature on other C3Ms reveals that the transition from spherical to wormlike micelles is probably a general phenomenon, which can be rationalized in terms of a classical packing parameter for amphiphiles.

Pyranine-induced self-assembly of colloidal structures using poly(allylamine-hydrochloride)

Complexes of dyes and polyelectrolytes have found widespread use in a variety of functional materials and interfaces. Here it is found that upon mixing the anionic dye pyranine and a cationic polyelectrolyte, poly(allylamine-hydrochloride), two different colloidal structures may form. Above a certain concentration of anionic dye, crosslinking of the polyelectrolyte is initiated, and the formation of sheet-like colloidal structures was observed. Addition of hydroxyl ions resulted in the formation of micron-sized spherical colloids. It was also found that the colloidal shape transition was accompanied by a significant red-shift in the fluorescence emission. Combining fluorescence measurements with studies of the particle size with time, it was found that red-shift was related to the crosslinking of the dye and the polyelectrolyte, and was not influenced significantly by the aggregation and particle growth. Further information about the colloidal behavior and stability was obtained by letting droplets dry and follow the kinetics of this process. It was found that the particles collapsed near the contact line and formed a ring deposit, in agreement with previous studies. However, unlike previous studies, the thickness of the ring deposit did not grow significantly with time, due to the peculiar process of formation found here.

Complex coacervate core micelles

In this review we present an overview of the literature on the co-assembly of neutral-ionic block, graft, and random copolymers with oppositely charged species in aqueous solution. Oppositely charged species include synthetic (co)polymers of various architectures, biopolymers - such as proteins, enzymes and DNA - multivalent ions, metallic nanoparticles, low molecular weight surfactants, polyelectrolyte block copolymer micelles, metallo-supramolecular polymers, equilibrium polymers, etcetera. The resultant structures are termed complex coacervate core/polyion complex/block ionomer complex/interpolyelectrolyte complex micelles (or vesicles); i.e., in short C3Ms (or C3Vs) and PIC, BIC or IPEC micelles (and vesicles). Formation, structure, dynamics, properties, and function will be discussed. We focus on experimental work; theory and modelling will not be discussed. Recent developments in applications and micelles with heterogeneous coronas are emphasized.