Titration of ionizable monolayers by measurement of the electric double-layer force

Chemically Functionalizing Controlled Dielectric Breakdown Silicon Nitride Nanopores by Direct Photohydrosilylation

Nanopores are a prominent enabling tool for single-molecule applications such as DNA sequencing, protein profiling, and glycomics, and the construction of ionic circuit elements. Silicon nitride (SiN_x) is a leading scaffold for these <100 nm-diameter nanofluidic ion-conducting channels, but frequently challenging surface chemistry remains an obstacle to their use. We functionalized more than 100 SiN_x nanopores with different surface terminations-acidic (Si-R-OH, Si-R-CO₂H), basic (Si-R-NH₂), and nonionizable (Si-R-C₆H₃(CF₃)₂)-to chemically tune the nanopore size, surface charge polarity, and subsequent chemical reactivity and to change their conductance by changes of solution pH. The initial one-reaction-step covalent chemical film formation was by hydrosilylation and could be followed by straightforward condensation and click reactions. The hydrosilylation reaction step used neat reagents with no special precautions such as guarding against water content. A key feature of the approach was to combine controlled dielectric breakdown (CDB) with hydrosilylation to create and functionalize SiN_x nanopores. CDB thus replaced the detrimental but conventionally necessary surface pretreatment with hydrofluoric acid. Proof-of-principle detection of the canonical test molecule, λ-DNA, yielded signals that showed that the functionalized pores were not obstructed by chemical treatments but could translocate the biopolymer. The characteristics were tuned by the surface coating character. This robust and flexible surface coating method, freed by CDB from HF etching, portends the development of nanopores with surface chemistry tuned to match the application, extending even to the creation of biomimetic nanopores.

Divalent-anion salt effects in polyelectrolyte multilayer depositions

We systematically investigate the effects of divalent anions on the assembly of polyelectrolyte multilayers by fabricating polystyrene sulfonate (PSS)/polyallylamine hydrochloride (PAH) multilayer films from aqueous solutions containing SO(4)(2-), HPO(4)(2-), or organic dicarboxylate dianions. The chosen concentrations of these anions (i.e., ≤0.05 M) allow us to isolate their effects on the assembly process from those of the polyelectrolyte solubility or solution ionic strength (maintained constant at μ = 1.00 M by added NaCl). Compared to a control film prepared from solutions containing only Cl(-) anions, stratified multilayers deposited in the presence of dianions exhibit increased UV absorbance, thickness, and roughness. From the dependence of film properties on the solution concentration of SO(4)(2-) and number of polyelectrolyte layers deposited, we derive a generic model for the PSS/PAH multilayer formation that involves adsorption of PAH aggregates formed in solution via electrostatic interactions of PAH with bridging dianions. Experiments using HPO(4)(2-) and organic dicarboxylate species of varying structure indicate that the separation, rigidity, and angle between the discrete negatively charged sites in the dianion govern the formation of the PAH aggregates, and therefore also the properties of the multilayer film. A universal linear relationship between film UV absorbance and thickness is observed among all dianion types or concentrations, consistent with the model.

Surface-enhanced Raman spectroscopy investigation of the potential-dependent acid-base chemistry of silver-immobilized 2-mercaptobenzoic acid

The acid-base chemistry of 2-mercaptobenzoic acid (2-MBA) immobilized on a polycrystalline silver surface was investigated by surface-enhanced Raman spectroscopy under potential control. The COO(-) bending mode of the benzoate form and the C-COOH stretching mode of the benzoic acid form of 2-MBA were used to determine the relative deprotonated and protonated populations of the bound ligand, respectively. In addition, shifts in the symmetric carboxylate stretching mode of 2-MBA reveal interactions between the benzoate group and the silver surface, interactions which could be displaced by acetate and other buffer anions from solution. It was found that the applied potential has a significant effect on the proton dissociation equilibrium of immobilized 2-MBA. This effect arises from the surface potential governing the activity of protons at the interface, which changes the interfacial pH relative to bulk solution. The results are fit to a Poisson-Boltzmann model, corrected for potential distribution across the monolayer and interactions between adjacent immobilized ligands. The results show a significant increase in the intrinsic pK(a) of the immobilized ligand compared to 2-MBA in free solution, which is likely due to an increase in electron density on the benzoic acid group that occurs upon binding of the thiol group to the silver surface.

Dynamic response of AFM cantilevers to dissimilar functionalized silica surfaces in aqueous electrolyte solutions

The dynamic response of an oscillating microcantilever with a gold-coated tip interacting with dissimilar functionalized silica surfaces was studied in electrolyte solutions with pH ranging from 4 to 9. Silica surfaces were chemically modified, yielding dissimilar surfaces with -Br, -NH(2), and -CH(3) functional group terminations. The relative hydrophobicity of the surfaces was characterized by contact angle measurements. The surface charge of the functionalized surfaces was first probed with commonly used static AFM measurements and serves as a reference to the dynamic response data. The amplitude and phase of the cantilever oscillation were monitored and used to calculate the effective interaction stiffness and damping coefficient, which relate to the electrical double layer interactions and also to distance-dependent hydrodynamic damping at the solid/water interface. The data for the dynamic response of the AFM over silica surfaces as a function of chemical functionalization and electrolyte pH show that the effective stiffness has a distinctive dependence on the surface charge of functionalized silica surfaces. The hydrodynamic damping also correlates strongly with the relative hydrophobicity of the surface. The data reported here indicate that interfacial properties can be strongly affected by changing the chemical composition of surfaces.

Direct surface force measurements of polyelectrolyte multilayer films containing nanocrystalline cellulose

Polyelectrolyte multilayer films containing nanocrystalline cellulose (NCC) and poly(allylamine hydrochloride) (PAH) make up a new class of nanostructured composite with applications ranging from coatings to biomedical devices. Moreover, these materials are amenable to surface force studies using colloid-probe atomic force microscopy (CP-AFM). For electrostatically assembled films with either NCC or PAH as the outermost layer, surface morphology was investigated by AFM and wettability was examined by contact angle measurements. By varying the surrounding ionic strength and pH, the relative contributions from electrostatic, van der Waals, steric, and polymer bridging interactions were evaluated. The ionic cross-linking in these films rendered them stable under all solution conditions studied although swelling at low pH and high ionic strength was inferred. The underlying polymer layer in the multilayered film was found to dictate the dominant surface forces when polymer migration and chain extension were facilitated. The precontact normal forces between a silica probe and an NCC-capped multilayer film were monotonically repulsive at pH values where the material surfaces were similarly and fully charged. In contrast, at pH 3.5, the anionic surfaces were weakly charged but the underlying layer of cationic PAH was fully charged and attractive forces dominated due to polymer bridging from extended PAH chains. The interaction with an anionic carboxylic acid probe showed similar behavior to the silica probe; however, for a cationic amine probe with an anionic NCC-capped film, electrostatic double-layer attraction at low pH, and electrostatic double-layer repulsion at high pH, were observed. Finally, the effect of the capping layer was studied with an anionic probe, which indicated that NCC-capped films exhibited purely repulsive forces which were larger in magnitude than the combination of electrostatic double-layer attraction and steric repulsion, measured for PAH-capped films. Wherever possible, DLVO theory was used to fit the measured surface forces and apparent surface potentials and surface charge densities were calculated.

Manipulation and charge determination of proteins in photopatterned solid supported bilayers

This work demonstrates the use of deep UV micropatterned chlorotrimethylsilane (TMS) monolayers to support lipid membranes on SiO(2) surfaces. After immersing such a patterned surface into a solution containing small unilamellar vesicles of egg PC, supported bilayer lipid membranes were formed on the hydrophilic, photolyzed regions and lipid monolayer over the hydrophobic, non-photolyzed regions. A barrier between the lipid monolayer and bilayer regions served to stop charged lipids migrating between the two. This allows the system to be used to separate charged lipids or proteins by electrophoresis. Either oppositely charged fluorescence labeled lipids [Texas Red DHPE (negative charge) and D291 (positive charge)] or lipids with different charge numbers [Texas Red DHPE (one negative charge) and NBD PS (two negative charges)] can be separated. We have also studied the migration of streptavidin attached to a biotinylated lipid. Negatively charged streptavidin responds to the applied electric field by moving in the direction of electroosmotic flow, i.e. towards the negative electrode. However the direction of streptavidin movement can be controlled by altering the difference in zeta potential between that of the streptavidin (zeta(1)) and the lipid membrane (zeta(2)). If zeta(1) > zeta(2), streptavidin moves to the negative electrode, while if zeta(1) < zeta(2), streptavidin moves to the positive electrode. This balance was manipulated by adding positively charged lipid DOTAP to the membrane. After measuring the average drift velocity of streptavidin as a function of DOTAP concentration, the point where zeta(1) approximately zeta(2) was found. At this point zeta(1) was calculated to be -9.8 mV which is in good agreement with the value of -13 mV from force measurements and corresponds to a charge of -2e per streptavidin, thus demonstrating the applicability of this method for determining protein charge.