Composition effects of FePt alloy nanoparticles on the electro-oxidation of formic acid

A hybrid FeOx/CoOx/Pt ternary nanocatalyst for augmented catalysis of formic acid electro-oxidation

Platinum-based catalysts that have long been used as the anodes for the formic acid electro-oxidation (FAO) in the direct formic acid fuel cells (DFAFCs) were susceptible to retrogradation in performance due to CO poisoning that impaired the technology transfer in industry. This work is designed to overcome this challenge by amending the Pt surface sequentially with nanosized cobalt (nano-CoOx, fibril texture of ca. 200 nm in particle size) and iron (nano-FeOx, nanorods of particle size and length of 80 and 253 nm, respectively) oxides. This enriched the Pt surface with oxygenated groups that boosted FAO and mitigated the CO poisoning. The unfilled d-orbitals of the transition metals and their tendency to vary their oxidations states presumed their participation in a faster mechanism of FAO. Engineering the Pt surface in this FeOx/CoOx/Pt hierarchy resulted in a remarkable activity toward FAO, that exceeded four times that of the Pt catalyst with up to ca. 2.5 times improvement in the catalytic tolerance against CO poisoning. This associated a ca. - 32 mV shift in the onset potential of FAO which increased to - 40 mV with a post-activation of the same catalyst at - 0.5  in 0.2 mol L-1 NaOH, displaying the catalyst's competitiveness in reducing overpotentials in DFAFCs. It also exhibited a favorable amelioration in the catalytic durability in long-termed chronoamperometric electrolysis. The electrochemical impedance spectroscopy and the CO stripping voltammetry were employed to elucidate the origin of enhancement.

Recent Advances in Anode Electrocatalysts for Direct Formic Acid Fuel Cell-II-Platinum-Based Catalysts

Platinum-based catalysts have a long history of application in formic acid oxidation (FAO). The single metal Pt is active in FAO but expensive, scarce, and rapidly deactivates. Understanding the mechanism of FAO over Pt important for the rational design of catalysts. Pt nanomaterials rapidly deactivate because of the CO poisoning of Pt active sites via the dehydration pathway. Alloying with another transition metal improves the performance of Pt-based catalysts through bifunctional, ensemble, and steric effects. Supporting Pt catalysts on a high-surface-area support material is another technique to improve their overall catalytic activity. This review summarizes recent findings on the mechanism of FAO over Pt and Pt-based alloy catalysts. It also summarizes and analyzes binary and ternary Pt-based catalysts to understand their catalytic activity and structure relationship.

Pt–Cu nanoalloy catalysts: compositional dependence and selectivity for direct electrochemical oxidation of formic acid

A PtCu3 nanoalloy catalyst showed much enhanced catalytic activity for the direct electrochemical oxidation of formic acid compared to a commercial platinum catalyst.

Tailor-designed nanowire-structured iron and nickel oxides on platinum catalyst for formic acid electro-oxidation

This investigation is concerned with designing efficient catalysts for direct formic acid fuel cells. A ternary catalyst containing iron (nano-FeOx) and nickel (nano-NiOx) nanowire oxides assembled sequentially onto a bare platinum (bare-Pt) substrate was recommended for the formic acid electro-oxidation reaction (FAOR). While nano-NiOx appeared as fibrillar nanowire bundles (ca. 82 nm and 4.2 μm average diameter and length, respectively), nano-FeOx was deposited as intersecting nanowires (ca. 74 nm and 400 nm average diameter and length, respectively). The electrocatalytic activity of the catalyst toward the FAOR depended on its composition and loading sequence. The FeOx/NiOx/Pt catalyst exhibited ca. 4.8 and 1.6 times increases in the catalytic activity and tolerance against CO poisoning, respectively, during the FAOR, relative to the bare-Pt catalyst. Interestingly, with a simple activation of the FeOx/NiOx/Pt catalyst at −0.5 V vs. Ag/AgCl/KCl (sat.) in 0.2 mol L⁻¹ NaOH, a favorable Fe²⁺/Fe³⁺ transformation succeeded in mitigating the permanent CO poisoning of the Pt-based catalysts. Interestingly, this activated a-FeOx/NiOx/Pt catalyst had an activity 7 times higher than that of bare-Pt with an ca. −122 mV shift in the onset potential of the FAOR. The presence of nano-FeOx and nano-NiOx enriched the catalyst surface with extra oxygen moieties that counteracted the CO poisoning of the Pt substrate and electronically facilitated the kinetics of the FAOR, as revealed from CO stripping and impedance spectra.

A FeOx/NiOx/Pt catalyst was recommended for formic acid electro-oxidation; the essential anodic reaction in direct formic acid fuel cells.

Noble Metal-Based Multimetallic Nanoparticles for Electrocatalytic Applications

Noble metal-based multimetallic nanoparticles (NMMNs) have attracted great attention for their multifunctional and synergistic effects, which offer numerous catalytic applications. Combined experimental and theoretical studies have enabled formulation of various design principles for tuning the electrocatalytic performance through controlling size, composition, morphology, and crystal structure of the nanoparticles. Despite significant advancements in the field, the chemical synthesis of NMMNs with ideal characteristics for catalysis, including high activity, stability, product-selectivity, and scalability is still challenging. This review provides an overview on structure-based classification and the general synthesis of NMMN electrocatalysts. Furthermore, postsynthetic treatments, such as the removal of surfactants to optimize the activity, and utilization of NMMNs onto suitable support for practical electrocatalytic applications are highlighted. In the end, future direction and challenges associated with the electrocatalysis of NMMNs are covered.

Photocatalytic selective H2release from formic acid enabled by CO2captured carbon nitride

The selective decomposition of formic acid (FA) traditionally needs to be carried out under high temperature with the noble metal-based catalysts. Meanwhile, it also encounters a separation of H₂and CO₂for pure H₂production. The photocatalytic FA dehydrogenation under mild conditions can meet a growing demand for sustainable H₂generation. Here, we reported a photocatalytic selective H₂release from FA decomposition at low temperature for pure H₂production by Pt/g-C₃N₄. Low-cost and easy-to-obtained urea was utilized to produce carbon nitride as the metal-free semiconductor photocatalyst, along with a photodeposition to obtain Pt/g-C₃N₄. The electrochemical evidences clearly demonstrate the photocatalytic activity of Pt/g-C₃N₄to produce H₂and CO₂in one-step FA decomposition. And, the impedance is the lowest under simulated solar light of 70 mW cm^-2with a faster electron transfer kinetic. Under simulated solar light, H₂production rate is up to 1.59 mmol · h^-1· g^-1for FA with concentration at 2.65 mol l^-1, 1700 000 times larger than that under visible light and 1928 times under ultraviolet (UV) light. DFT calculations further elucidate that nitrogen (N) active site at the g-C₃N₄has an excellent adsorption towards CO₂molecule capture. Then, H₂molecules are selectively released to simultaneously separate H₂and CO₂in solution. Platinum (Pt) at Pt/g-C₃N₄as the catalytic site contributes into the acceleration of H₂production.

Zinc-Coordination Polymer-Derived Porous Carbon-Supported Stable PtM Electrocatalysts for Methanol Oxidation Reaction

Porous carbon (PC) is obtained by carbonizing a zinc-coordination polymer (MOF-5) at 950 °C and PtM (M = Fe, Co, Ni, Cu, Zn) nanoparticles (NPs), which are deposited on PC using the polyol method. Structural and morphological characterizations of the synthesized materials are carried out by powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), and high-resolution transmission electron microscopy (HRTEM), and the porosity was determined using a N2 adsorption/desorption technique. The results revealed that PtM NPs are alloyed in the fcc phase and are well dispersed on the surface of PC. The electrochemical results show that PtM/PC 950 catalysts have higher methanol oxidation reaction (MOR) performances than commercial Pt/C (20%) catalysts. After 3000 s of chronoamperometry (CA) test, the MOR performances decreased in the order of Pt1Cu1/PC 950 > Pt1Ni1/PC 950 > Pt1Fe1/PC 950 > Pt1Zn1/PC 950 > Pt1Co1/PC 950. The high MOR activities of the synthesized catalysts are attributed to the effect of M on methanol dissociative chemisorption and improved tolerance of Pt against CO poisoning. The high specific surface area and porosity of the carbon support have an additional effect in boosting the MOR activities. Screening of the first row transition metals (d 5+n , n = 1, 2, 3, 4, 5) alloyed with Pt binary catalysts for MOR shows that Pt with d 8 (Ni) and d 9 (Cu) transition metals, in equivalent atomic ratios, are good anode catalysts for alcohol fuel cells.

Methanol, Ethanol, and Formic Acid Oxidation on New Platinum-Containing Catalysts

Electrooxidation of methanol, ethanol, and formic acid was studied on three platinum-containing electrocatalysts: PtCu/C, Pt/(SnO2/C), and Pt/C, Pt content being about 20 wt%. In all reactions, the integral specific activity of the catalysts, estimated from the results of cyclic voltammetry, grows in the Pt/C < Pt/(SnO2/C) < PtCu/C row. The influence of the reagent nature subjected to electrooxidation is manifested both in the difference of the absolute rate values of the corresponding reactions, decreasing in the order CH3OH > HCOOH > C2H5OH, and in the different ratio of these rates on different catalysts and at different potentials. Pt/(SnO2/C) catalyst containing SnO2 nanoparticles is the most active among the studied catalysts in methanol and formic acid electrooxidation reactions under potentiostatic conditions at the E = 0.60 V. Moreover, in formic acid electrooxidation reaction it is significantly superior to even the PtRu/C commercial catalyst. The reasons for the positive influence of Cu atoms and SnO2 nanoparticles on the catalytic activity of platinum are presumably associated with different effects: Interaction of the d-orbitals of copper and platinum atoms in bimetallic nanoparticles and implementation of the bifunctional catalysis mechanism on the adjacent platinum and tin dioxide nanoparticles.

Recent advances in formic acid electro-oxidation: from the fundamental mechanism to electrocatalysts

Direct formic acid fuel cells have attracted significant attention because of their low fuel crossover, high safety, and high theoretical power density among all the proton-exchange membrane fuel cells. Much effort has been devoted to the study of formic acid oxidation, including the reaction processes and electrocatalysts. However, as a model reaction, the anodic electro-oxidation process of formic acid is still not very clear, especially regarding the confirmation of the intermediates, which is not helpful for the design and synthesis of high-performance electrocatalysts for formic acid oxidation or conducive to understanding the reaction mechanisms of other small fuel molecules. Herein, we briefly review the recent advances in investigating the mechanism of formic acid electro-oxidation and the basic design concepts of formic acid oxidation electrocatalysts. Rather than an exhaustive overview of all aspects of this topic, this mini-review mainly outlines the progress of this field in recent years.

Random alloy and intermetallic nanocatalysts in fuel cell reactions

Fuel cells that use small organic molecules or hydrogen as the anode fuel can power clean electric vehicles. From an experimental perspective, the possible fuel cells' electrocatalytic reaction mechanisms are obtained through in situ electrochemical spectroscopy techniques and density functional theory calculations, providing theoretical guidance for further development of novel nanocatalysts. As advanced nanocatalysts for fuel cells' electrochemical reactions, alloy nanomaterials have greatly improved electrocatalytic activity and stability and have attracted widespread attention. Enhanced electrocatalytic performance of alloy nanocatalysts could be closely related to the synergistic effects, such as electronic and strain effects. Depending on the arrangement of atoms, alloys can be classified into random alloy and intermetallic compounds (ordered structure). Intermetallic compounds generally have lower heats of formation and stronger heteroatomic bonding strength relative to the random alloy, resulting in high chemical and structural stability in either full pH solutions or electrochemical tests. Here, we summarize the latest advances and the structure-function relationship of noble metal alloy nanocatalysts, among which Pt-based catalysts are the main ones, as well as comprehensively understand why they significantly affect the electrocatalytic performance of fuel cells. Novel alloy nanocatalysts with a robust three-phase interface to achieve efficient charge and mass transfer can obtain desirable activity and stability in the electrochemical workstation tests, and is expected to acquire a higher power density on fuel cell test systems with harsh test conditions.

Enhancement of the performance of Pd nanoclusters confined within ultrathin silica layers for formic acid oxidation

The optimized design of highly active and stable anode electrocatalysts is essential for high performance direct formic acid fuel cells (DFAFCs). Herein, a facile and cost-effective strategy was proposed to fabricate a robust ultrasmall Pd nanocluster confined within ultrathin protective silica layers anchored on nitrogen doped reduced GO (NrGO) through generating amine functionalized graphene oxide with 3-aminopropyl triethoxysilane (APTES), followed by tuning the thickness of protective silica layers by precisely controlling the amount of tetraethylorthosilicate (TEOS). Amine functionalized graphene oxide generated by using APTES favors the formation of ultrasmall Pd nanoclusters due to the coordination of amine to PdCl24- while the confinement effect of ultrathin protective silica layers stabilizes ultrasmall Pd nanoclusters and impedes the agglomeration and sintering of ultrasmall Pd nanoclusters during electrocatalysis. As a result, the ultrasmall Pd nanoclusters (∼1.4 nm) confined in silica layers on NrGO (Pd/NrGO@SiO2) demonstrate a very high forward peak current density for formic acid oxidation (FAO) of 2.37 A mg-1, outperforming the Pd/C catalyst (0.30 A mg-1) and the Pd/rGO catalyst obtained by a conventional method (0.42 A mg-1). More importantly, our confined Pd catalysts show the highest stability of only 5% inconspicuous degradation of the initial mass activity after 1000 cycles, compared with Pd/C (almost 100% loss), Pd/rGO (61.5% loss) and Pd/NrGO (73.2% loss). These strategies in this work provide a new prospect for the design of excellent noble catalysts to overcome the challenges in the practical application of DFAFCs.

Ligand-free gold nanoclusters confined in mesoporous silica nanoparticles for styrene epoxidation

We present a novel approach to produce gold nanoclusters (Au NCs) in the pores of mesoporous silica nanoparticles (MSNs) by sequential and controlled addition of metal ions and reducing agents. This impregnation technique was followed to confine Au NCs inside the pores of MSNs without adding external ligands or stabilizing agents. TEM images show a uniform distribution of monodisperse NCs with an average size of 1.37 ± 0.4 nm. Since the NCs are grown in situ in MSN pores, additional support and high temperature calcination are not required to use them as catalysts. The use of Au NC/MSNs as a catalyst for the epoxidation of styrene in the presence of tert-butyl hydroperoxide (TBHP) as a terminal oxidant resulted in an 88% conversion of styrene in 12 h with a 74% selectivity towards styrene epoxide. Our observations suggest that this remarkable catalytic performance is due to the small size of Au NCs and the strong interaction between gold and the MSNs. This catalytic conversion is environmentally friendly as it is solvent free. We believe our synthetic approach can be extended to other metal NCs offering a wide range of applications.

In Situ Exfoliation and Pt Deposition of Antimonene for Formic Acid Oxidation via a Predominant Dehydrogenation Pathway

Direct formic acid fuel cell (DFAFC) has been considered as a promising energy conversion device for stationary and mobile applications. Advanced platinum (Pt) electrocatalysts for formic acid oxidation reaction (FAOR) are critical for DFAFC. However, the oxidation of formic acid on Pt catalysts often occurs via a dual pathway mechanism, which hinders the catalytic activity owing to the CO poisoning. Herein, we directly exfoliate bulk antimony to 2D antimonene (Sb) and in situ load Pt nanoparticles onto antimonene sheets with the assistance of ethylenediamine. According to the Bader charge analysis, the charge transfer from antimonene to Pt occurs, confirming the electronic interaction between Pt and Sb. Interestingly, antimonene, as a cocatalyst, alters the oxidation pathway for FAOR over Pt catalyst and makes FAOR follow the more efficient dehydrogenation pathway. The density functional theory (DFT) calculation demonstrates that antimonene can activate Pt to be a lower oxidative state and facilitate the oxidation of HCOOH into CO₂ via a direct pathway, resulting in a weakened intermediate binding strength and better CO tolerance for FAOR. The specific activity of FAOR on Pt/Sb is 4.5 times, and the mass activity is 2.6 times higher than the conventional Pt/C.

Effective immobilization of nanoscale Pd on a carbon hybrid for enhanced electrocatalytic performances: stabilization mechanism investigations

The grand challenge inhibiting the use of electrocatalysts is the degradation of active species which results in poor durability and long-term performances. Studying the origin of active metal particle stabilization mechanisms by using supports and the immobilization-induced changes of active particles is of significant importance. This study describes the preparation of Pd nanoparticles supported by carbon hybrid NPG-CN, revealing that the mass and specific activities (1987 A g-1 Pd and 28.7 A m-2) of this catalyst for formic acid oxidation significantly exceed those of commercial Pd/C, and excellent stability and enhanced CO-poisoning tolerance properties are obtained. The origin of this behavior is probed by surface analytical techniques and identical-location transmission electron microscopy (IL-TEM), and the enhanced activity of Pd/NPG-CN is ascribed to the electronic effect of the substrate, the high content of surface metallic Pd0, and the reduced extent of active Pd leaching and physical ripening during the FOA process compared with commercial Pd/C. In addition, theoretical calculations demonstrate that NPG-CN can efficiently trap Pd atoms, which accumulate and form Pd clusters at trapping (nucleation) sites.

Conformal Solution Deposition of Pt-Pd Titania Nanocomposite Coatings for Light-Assisted Formic Acid Electro-Oxidation

Many nanofabrication processes require sophisticated equipment, elevated temperature, vacuum or specific atmospheric conditions, templates, and exotic chemicals, which severely hamper their implementation in real-world applications. In this study, we outline a fully wet-chemical procedure for equipping a 3D carbon felt (CF) substrate with a multifunctional, titania nanospike-supported Pt-Pd nanoparticle (Pt-Pd-TiO₂@CF) layer in a facile and scalable manner. The nanostructure, composition, chemical speciation, and formation of the material was meticulously investigated, evidencing the conformal coating of the substrate with a roughened layer of nanocrystalline rutile spikes by chemical bath deposition from Ti³⁺ solutions. The spikes are densely covered by bimetallic nanoparticles of 4.4 ± 1.1 nm in size, which were produced by autocatalytic Pt deposition onto Pd seeds introduced by Sn²⁺ ionic layer adsorption and reaction. The as-synthesized nanocomposite was applied to the (photo)electro-oxidation of formic acid (FA), exhibiting a superior performance compared to Pt-plated, Pd-seeded CF (Pt-Pd@CF) and commercial Pt-C, indicating the promoting electrocatalytic role of the TiO₂ support. Upon UV-Vis illumination, the performance of the Pt-Pd-TiO₂@CF electrode is remarkably increased (22-fold), generating a current density of 110 mA cm^-2, distinctly outperforming titania-free Pt-Pd@CF (5 mA cm^-2) and commercial Pt-C (6 mA cm^-2) reference catalysts. In addition, the Pt-Pd-TiO₂@CF showed a much better stability, characterized by a very high poisoning tolerance for in situ-generated CO intermediates, whose formation is hindered in the presence of TiO₂. This overall performance boost is attributed to a dual enhancement mechanism (∼30% electrocatalytic and ∼70% photoelectrocatalytic). The photogenerated electrons from the TiO₂ conduction band enrich the electron density of the Pt nanoparticles, promoting the generation of active oxygen species on their surfaces from adsorbed oxygen and water molecules, which facilitate the direct FA electro-oxidation into CO₂.

Ternary CoPtAu Nanoparticles as a General Catalyst for Highly Efficient Electro-oxidation of Liquid Fuels

Efficient electro-oxidation of formic acid, methanol, and ethanol is challenging owing to the multiple chemical reaction steps required to accomplish full oxidation to CO₂ . Herein, a ternary CoPtAu nanoparticle catalyst system is reported in which Co and Pt form an intermetallic L1₀ -structure and Au segregates on the surface to alloy with Pt. The L1₀ -structure stabilizes Co and significantly enhances the catalysis of the PtAu surface towards electro-oxidation of ethanol, methanol, and formic acid, with mass activities of 1.55 A/mg_Pt , 1.49 A/mg_Pt , and 11.97 A/mg_Pt , respectively in 0.1 m HClO₄ . The L1₀ -CoPtAu catalyst is also stable, with negligible degradation in mass activities and no obvious Co/Pt/Au composition changes after 10 000 potential cycles. The in situ surface-enhanced infrared absorption spectroscopy study indicates that the ternary catalyst activates the C-C bond more efficiently for ethanol oxidation.

Synthesis of catalytically active bimetallic nanoparticles within solution-processable metal–organic-framework scaffolds

Bimetallic alloy nanoparticles are synthesized by in situ reduction of mixed metal ions inside CD-MOFs.

The effect of core-shell engineering on the energy product of magnetic nanometals

Solution-based growth of magnetic FePt-FeCo (core-shell) nanoparticles with a controllable shell thickness has been demonstrated. The transition from spin canting to exchange coupling of FePt-FeCo core-shell nanostructures leads to a 28% increase in the coercivity (12.8 KOe) and a two-fold enhancement in the energy product (9.11 MGOe).

Charge transfer interactions of pyrazine with Ag12 clusters towards precise SERS chemical mechanism

We have synthesized Ag12 nanoclusters (NCs) with mercaptosuccinic acid (H2SMA) as the ligand. This cluster is found to be water-soluble and has satisfactory stability with [Ag12(HSMA)6Na6]2+, as determined by high-resolution mass spectrometry. Interestingly, it is noted that both the H2SMA ligand and Ag12 clusters do not display interference Raman signals, suggesting that this material is a good candidate as a substrate for surface-enhanced Raman spectroscopy (SERS). As a result, we observe enhanced Raman activity of pyrazine molecules adsorbed on Ag12 NCs along with a large red-shift up to ∼27 cm-1. To fully demonstrate the charge transfer interactions between pyrazine and Ag12 clusters, by utilizing first-principles calculations, we estimate polarizability tensor and conduct electronic natural population analysis (NPA), natural bond orbital (NBO) analysis, deformation density analysis (DDA) and charge decomposition analysis (CDA). In view of the minimized contribution from local surface plasmon resonance (LSPR), such a comprehensive study of metal NCs, which are free of Raman interference, provides a modelling method towards the long-debated chemical mechanism in SERS theory.

Random Alloyed versus Intermetallic Nanoparticles: A Comparison of Electrocatalytic Performance

As synthetic methods advance for metal nanoparticles, more rigorous studies of structure-function relationships can be made. Many electrocatalytic processes depend on the size, shape, and composition of the nanocatalysts. Here, the properties and electrocatalytic behavior of random alloyed and intermetallic nanoparticles are compared. Beginning with an introduction of metallic nanoparticles for catalysis and the unique features of bimetallic compositions, the discussion transitions to case studies of nanoscale electrocatalysts where direct comparisons of alloy and intermetallic compositions are undertaken for methanol electrooxidation, formic acid electrooxidation, the oxygen reduction reaction, and the electroreduction of carbon dioxide (CO2 ). Design and synthesis strategies for random alloyed and intermetallic nanoparticles are discussed, with an emphasis on Pt-M and Cu-M compositions as model systems. The differences in catalytic performance between alloys and intermetallic nanoparticles are highlighted in order to provide an outlook for future electrocatalyst design.

Branched PdAu nanowires with superior electrocatalytic formic acid oxidation activities

Branched PdAu nanowires supported on graphene were prepared as catalysts for formic acid electro-oxidation, and they exhibited higher catalytic activity and durability than Pd/graphene and commercial Pd/C catalysts.

Formate: A Possible Replacement for Formic Acid in Fuel Cells

We present a facile thermodynamic strategy for identifying formate electrooxidation at a Pt electrode in a fuel cell. Mixtures of formate and sulfuric acid are used as fuel solutions for maintaining formic acid at a low concentration and reducing CO poisoning of the Pt electrode. Pt is modified by a polyaniline porous film to improve the electrocatalytic activity towards formate oxidation. The result indicates that formate can bypass the poisoning path to form CO2 at a low potential. Additionally, we propose a new mechanism of formate electrooxidation and investigate the possibility of an independent oxidation path starting from free formate in solution.

Synergistic effect of graphene and multi-walled carbon nanotubes composite supported Pd nanocubes on enhancing catalytic activity for electro-oxidation of formic acid

Synergistic effect of rGO/MWCNTs composite supported Pd nanocubes enhanced the performance of direct formic acid fuel cells.

Synthesis of hollow PtAg alloy nanospheres with excellent electrocatalytic performances towards methanol and formic acid oxidations

Hollow PtAg alloy nanospheres were synthesized via galvanic replacement reaction between silver nanoparticles and K₂PtCl₄ at 60 °C.

Enhanced electrocatalytic activity and durability of highly monodisperse Pt@PPy–PANI nanocomposites as a novel catalyst for the electro-oxidation of methanol

Highly monodisperse Pt NPs@PPy–PANI exhibits superior electrocatalytic activity and stability toward electro-oxidation of methanol as a new electrode material.

Identifying the Atomic-Level Effects of Metal Composition on the Structure and Catalytic Activity of Peptide-Templated Materials

Bioinspired approaches for the formation of metallic nanomaterials have been extensively employed for a diverse range of applications including diagnostics and catalysis. These materials can often be used under sustainable conditions; however, it is challenging to control the material size, morphology, and composition simultaneously. Here we have employed the R5 peptide, which forms a 3D scaffold to direct the size and linear shape of bimetallic PdAu nanomaterials for catalysis. The materials were prepared at varying Pd:Au ratios to probe optimal compositions to achieve maximal catalytic efficiency. These materials were extensively characterized at the atomic level using transmission electron microscopy, extended X-ray absorption fine structure spectroscopy, and atomic pair distribution function analysis derived from high-energy X-ray diffraction patterns to provide highly resolved structural information. The results confirmed PdAu alloy formation, but also demonstrated that significant surface structural disorder was present. The catalytic activity of the materials was studied for olefin hydrogenation, which demonstrated enhanced reactivity from the bimetallic structures. These results present a pathway to the bioinspired production of multimetallic materials with enhanced properties, which can be assessed via a suite of characterization methods to fully ascertain structure/function relationships.

Optimal Electrocatalytic Pd/MWNTs Nanocatalysts toward Formic Acid Oxidation

The operating conditions such as composition of electrolyte and temperature can greatly influence the formic acid (HCOOH) oxidation reaction (FAOR). Palladium decorated multi-walled carbon nanotubes (Pd/MWNTs) were successfully synthesized and employed as nanocatalysts to explore the effects of formic acid, sulfuric acid (H₂SO₄) concentration and temperature on FAOR. Both the hydrogen adsorption in low potential range and the oxidation of poisoning species during the high potential range in cyclic voltammetry were demonstrated to contribute to the enhanced electroactivity of Pd/MWNTs. The as-synthesized Pd/MWNTs gave the best performance under a condition with balanced adsorptions of HCOOH and H₂SO₄ molecules. The dominant dehydrogenation pathway on Pd/MWNTs can be largely depressed by the increased dehydration pathway, leading to an increased charge transfer resistance (R_ct ). Increasing HCOOH concentration could directly increase the dehydration process proportion and cause the production of CO_ads species. H₂SO₄ as donor of H⁺ greatly facilitated the onset oxidation of HCOOH in the beginning process but it largely depressed the HCOOH oxidation with excess amount of H⁺. Enhanced ion mobility with increasing the temperature was mainly responsible for the increased current densities, improved tolerance stabilities and reduced R_ct values, while dehydration process was also increased simultaneously.