Direct facile approach to the fabrication of chitosan-gold hybrid nanospheres

Supramolecular Assembly and Reversible Transition and of Chitosan Fluorescent Micelles by Noncovalent Modulation

Chitosan-based intelligent artificial systems have been of increasing interest for their biocompatibility, multifunctionality, biological activity, and low cost. Herein, we report the fabrication of supramolecular nanoparticles based on water-soluble chitosan (WCS) and 1,1 ${}^{\prime }$ ,1 ${}^{″}$ ,1 ${}^{″\prime }$ -(ethene-1,1,2,2-tetrayl)tetrakis(benzene-4,1-diyl) tetrakis(azanediyl)tetraacetic acid (TPE-(N-COOH)4), which is capable of reversible transition between polyion complexes (PICs) and hydrogen bonding complexes (HBCs) with tunable aggregation-induced emission driven by pH value. The PIC micelles could be formed via electrostatic interaction between ammonium cations and carboxylate anions under mild alkaline conditions. The formation of the micelles dramatically blocks the nonradiative pathway and enhances the fluorescence of TPE moieties, and the maximum fluorescence intensity was achieved near the isoelectric point due to the restriction of intramolecular motion. In addition, the fluorescence intensity and size of the PIC micelles exhibited a temperature response in the range from 20 to 80°C. Upon adjusting the solution pH to 2, the PIC micelles were reconstructed into hydrogen-bonding complexes while the hydrogen bonding interaction between the protonated carboxyl groups of TPE-(N-COOH)4 and chitosan. Moreover, the size of the micelles underwent a remarkable decrease, whereas the fluorescence emission was further enhanced by ~6.25-fold. The pH actuated micellar transition from PIC to HBC with tunable fluorescence performance is fully reversible. This study provides novel multifunctional materials that are of great importance for their potential application in the fields of optoelectronic devices and chemical and biomedical sensors.

In situ formation of gold nanoparticles in polymer inclusion membrane: Application as platform in a label-free potentiometric immunosensor for Salmonella typhimurium detection

Polymeric ion selective electrodes are highly sensitive to changes in zero current ion flow and this offers a route to signal amplification in label-free potentiometric immunosensors. In this work, a label-free potentiometric immunosensor toward Salmonella typhimurium (ST) assembled in a home-made pipette-tip electrode is described. The signal-output amplification was implemented on a gold nanoparticle polymer inclusion membrane (AuNPs-PIM) which was used as sensing platform and for antibody immobilization. Additionally, a marker ion was used to detect the antibody-antigen binding event at the electrode surface. The immunosensor construction was performed in several steps: i) gold salt ions extraction in PVC membrane; ii) AuNPs formation using Na₂EDTA as reduction agent; iii) antibody anti-Salmonella conjugation on AuNPs-PIM in pipette-tip electrodes. The potential shift observed in potentiometric measurements was derived simply from the blocking effect in the ionic flux caused by antigen-antibody conjugation, without no extra steps, mimetizing the ion-channel sensors. A detection limit of 6 cells mL^-1 was attained. As proof-of-concept, recovery studies were performed in spiked commercial apple juice samples with success. Due to the simplicity of use, the appealing cost of equipment and sensor production and being able to provide a quick analytical response (less than 1 h for a complete assay, including sample preparation for analysis), this scheme represents a good prototype device for the detection of foodborne pathogens like ST or other immune-responsive bacteria.

Shape-Controlled Synthesis of Au Nanostructures Using EDTA Tetrasodium Salt and Their Photothermal Therapy Applications

Tuning the optical properties of Au nanostructures is of paramount importance for scientific interest and has a wide variety of applications. Since the surface plasmon resonance properties of Au nanostructures can be readily adjusted by changing their shape, many approaches for preparing Au nanostructures with various shapes have been reported to date. However, complicated steps or the addition of several reagents would be required to achieve shape control of Au nanostructures. The present work describes a facile and effective shape-controlled synthesis of Au nanostructures and their photothermal therapy applications. The preparation procedure involved the reaction of HAuCl₄ and ethylenediaminetetraacetic acid (EDTA) tetrasodium salt, which acted as a reducing agent and ligand, at room temperature without the need for any toxic reagent or additives. The morphology control from spheres to branched forms and nanowire networks was easily achieved by varying the EDTA concentration. Detailed investigations revealed that the four carboxylic groups of the EDTA tetrasodium salt are essential for effective growth and stabilization. The produced Au nanowire networks exhibited a broad absorption band in the near-infrared (NIR) region, thereby showing efficient cancer therapeutic performance by inducing the selective photothermal destruction of cancerous glioblastoma cells (U87MG) under NIR irradiation.

A gold–chitosan composite with low symmetry zinc phthalocyanine for enhanced singlet oxygen generation and improved photodynamic therapy activity

A gold–chitosan composite with low symmetry zinc phthalocyanine showed no dark cytotoxicity activity and improved photodynamic therapy compared to that of the phthalocyanine alone.

Polymer particles filled with multiple colloidal silica via in situ sol-gel process and their thermal property

The in situ formation of dielectric silica (SiO₂) particles was carried out in the presence of temperature-responsive poly(N-isopropylacrylamide) particles. Unlike the typical sol-gel method used to prepare various SiO₂ particles, the highly uniform growth of SiO₂ particles was achieved within the cross-linked polymer particles (i.e., the polymer particles were filled with the SiO₂ particles) simply by utilizing interfacial interactions, including the van der Waals attractive force and hydrogen bonding in nanoscale environments. The structural and morphological features as well as the thermal behaviors of these composites were thoroughly examined by electron microscopes, dynamic light scattering, and thermal analyzers. In particular, the thermal properties of these composites were completely different from the bare polymer, SiO₂ particles, and their mixtures, which clearly suggested the successful incorporation of multiple SiO₂ particles within the cross-linked polymer particles. Similarly, titanium oxide (TiO₂) particles were easily embedded within the polymer particle template which exhibited improved overall properties. As a whole, understanding in situ formation of nanoscale inorganic particles within polymer particle templates can allow for designing novel composite materials possessing enhanced chemical and physical properties.

Chitosan supraparticles with fluorescent silica nanoparticle shells and nanodiamond-loaded cores

Supraparticles with a biopolymer chitosan core and templated with (ultra)small nanoparticles are reported. Nanoparticle density on the template surface could be controlled and the template core could be loaded with nanodiamonds.

Phenylboronic Acid-Mediated Tumor Targeting of Chitosan Nanoparticles

The phenylboronic acid-conjugated chitosan nanoparticles were prepared by particle surface modification. The size, zeta potential and morphology of the nanoparticles were characterized by dynamic light scattering, zeta potential measurement and transmission electron microscopy. The cellular uptake, tumor penetration, biodistribution and antitumor activity of the nanoparticles were evaluated by using monolayer cell model, 3-D multicellular spheroid model and H22 tumor-bearing mice. The incorporation of phenylboronic acid group into chitosan nanoparticles impart a surface charge-reversible characteristic to the nanoparticles. In vitro evaluation using 2-D and 3-D cell models showed that phenylboronic acid-decorated nanoparticles were more easily internalized by tumor cells compared to non-decorated chitosan nanoparticles, and could deliver more drug into tumor cells due to the active targeting effect of boronic acid group. Furthermore, the phenylboronic acid-decorated nanoparticles displayed a deeper penetration and persistent accumulation in the multicellular spheroids, resulting in better inhibition growth to multicellular spheroids than non-decorated nanoparticles. Tumor penetration, drug distribution and near infrared fluorescence imaging revealed that phenylboronic acid-decorated nanoparticles could penetrate deeper and accumulate more in tumor area than non-decorated ones. In vivo antitumor examination demonstrated that the phenylboronic acid-decorated nanoparticles have superior efficacy in restricting tumor growth and prolonging the survival time of tumor-bearing mice than free drug and drug-loaded chitosan nanoparticles.

Nanogels as imaging agents for modalities spanning the electromagnetic spectrum

In the past few decades, advances in imaging equipment and protocols have expanded the role of imaging in in vivo diagnosis and disease management, especially in cancer. Traditional imaging agents have rapid clearance and low specificity for disease detection. To improve accuracy in disease identification, localization and assessment, novel nanomaterials are frequently explored as imaging agents to achieve high detection specificity and sensitivity. A promising material for this purpose are hydrogel nanoparticles, whose high hydrophilicity, biocompatibility, and tunable size in the nanometer range make them ideal for imaging. These nanogels (10 to 200 nm) can circumvent uptake by the reticuloendothelial system, allowing longer circulation times than small molecules. In addition, their size/surface properties can be further tailored to optimize their pharmacokinetics for imaging of a particular disease. Herein, we provide a comprehensive review of nanogels as imaging agents in various modalities with sources of signal spanning the electromagnetic spectrum, including MRI, NIR, UV-vis, and PET. Many materials and formulation methods will be reviewed to highlight the versatility of nanogels as imaging agents.

Green synthesis of folic acid-conjugated gold nanoparticles with pectin as reducing/stabilizing agent for cancer theranostics

The one pot aqueous green synthesis of gold nanoparticles (GNPs) decorated with folic acid and loaded with doxorubicin suitable for anti-cancer drug delivery was potentially promising as a new therapeutic system for cancer treatment.

Ultra-high relaxivity iron oxide nanoparticles confined in polymer nanospheres for tumor MR imaging

Superparamagnetic iron oxide nanoparticles encapsulated in hydrophilic chitosan nanospheres were prepared by nonsolvent-aided counterion complexation completely in an aqueous solution. The T₂ relaxation of these hybrid nanospheres in vitro and in vivo was investigated. It was found that the molar transverse relaxivity rate r₂ of hybrid nanospheres highly depends upon the payload of iron oxide nanoparticles within hybrid nanospheres. Compared to free iron oxide nanoparticles, the molar transverse relaxivity rate, r₂ of hybrid nanospheres shows an approximately 8-fold increase and reaches the maximum of 533 Fe mM^-1 s^-1. Such a high r₂ value is probably associated with the clustering effect of iron oxide nanoparticles, which are confined in the chitosan nanospheres. The in vivo magnetic resonance imaging (MRI) demonstrates that the hybrid nanospheres shorten transverse relaxation time, T₂ and significantly decrease the signal intensity of the tumor area, giving rise to high contrast tumor MR imaging at a relatively low dose.

Delivery of platinum(IV) drug to subcutaneous tumor and lung metastasis using bradykinin-potentiating peptide-decorated chitosan nanoparticles

Selectively activating tumor vessels to increase drug delivery and reduce interstitial fluid pressure of tumors is actively pursued. Here we developed a vasoactive peptide-decorated chitosan nanoparticles for enhancing drug accumulation and penetration in subcutaneous tumor and lung metastasis. The vasoactive peptide used here is bradykinin-potentiating peptide (BPP) containing 9 amino acid residues and the drug is bioreductively sensitive platinum(IV) compound which becomes cisplatin in intracellular reductive environments. Both peptide and drug are covalently linked with chitosan nanoparticles with a diameter of 120 nm. We demonstrate that BPP-decorated chitosan nanoparticles increase the tumorous vascular permeability and reduce the interstitial fluid pressure of tumor simultaneously, both of which improve the penetration of nanoparticles in tumor tissues. The in vivo biodistribution and tumor inhibition examinations demonstrate that the BPP-decorated nanoparticle formulation has more superior efficacy in enhancing drug accumulation in tumor, restraining tumor growth and prolonging the lifetime of tumor-bearing mice than free drug and non-decorated nanoparticle formulation. Meanwhile, the drug accumulation in the lung with metastasis reaches 17% and 20% injected dose per gram of lung for the chitosan nanoparticles without and with BPP decoration, respectively, which is 10-fold larger than that of free cisplatin. The examination of lung metastasis inhibition further indicates that BPP-decorated chitosan nanoparticle formulations can more effectively inhibit lung metastasis.

Rapid hybridization of chitosan-gold-antibodies via metal-free click in water-based systems: a model approach for naked-eye detectable antigen sensors

A surface plasmon resonance (SPR) expression after hybridization of chitosan-gold nanoparticle-antibody (CS-AuNPs-Ab) based on: i) metal-free click chemistry, and, ii) in water system as an approach for a rapid antigen sensing, is proposed. The chitosan-hydroxybenzyl triazole complex enables us to carry out the conjugation of mPEG and trifluoromethylated oxanorbornadiene (OND) in water. CS-mPEG-OND further allows metal-free click to hybridize chitosan (CS) with azido-modified gold nanoparticles (azido-AuNPs) in aqueous solution at room temperature. The CS-mPEG-OND conjugated with LipL32 antibody (Ab) not only effectively binds with LipL32 antigen (Ag) but also performs the cycloaddition with azido-AuNPs to display a change in color within 2 min. The phenomenon leads to a simple and efficient naked-eye antigen detection technique.

In situ preparation of gold nanoparticle-loaded lysozyme-dextran nanogels and applications for cell imaging and drug delivery

An effective, green, and facile approach to synthesize gold nanoparticle-loaded protein-polysaccharide nanogels was developed in this study. Biocompatible gold nanoparticle-loaded lysozyme-dextran (Au@Lys-Dex) nanogels were produced using lysozyme-dextran nanogels as reducing and stabilizing agents. Lysozyme-dextran nanogels have a size of about 200 nm and a structure of lysozyme core and dextran shell. At pH around 4, AuCl4(-) ions are attracted and locally enriched by lysozyme due to the electrostatic and coordination interactions. When the solution is under UV irradiation, the AuCl4(-) ions are reduced to gold nanoparticles in situ by solvated electrons and reactive radicals produced from aromatic amino acid residues in the lysozyme. The produced gold nanoparticles with a size of about 8 nm are trapped inside the nanogels and the Au@Lys-Dex nanogels are well dispersible by virtue of the dextran shell. Antitumor drug, doxorubicin, can be loaded effectively inside Au@Lys-Dex nanogels via diffusion. In vitro study demonstrates the doxorubicin loaded Au@Lys-Dex nanogels have the same antitumor activity as free doxorubicin. The nanogels can be used as a contrasting agent in optical cell imaging, in which direct visual images of the subcellular distributions of the gold nanoparticles and the released doxorubicin are presented synchronously. The dual functional drug loaded Au@Lys-Dex nanogels are a promising system for simultaneous drug delivery and biomedical imaging.

Fabrication and characterization of gold-nanoparticles/chitosan film: a scaffold for L929-fibroblasts

The objective of the present study was to fabricate a gold nanoparticle crosslinked chitosan (Ch/AuNPs) composite film simple and to evaluate its use as a carrier matrix for L929- fibroblasts. L929- fibroblasts were seeded either onto Ch or Ch/AuNPs scaffolds. The Ch/AuNPs scaffold exhibited a higher cell proliferation and growth rate. The cytotoxicity test determined trypan blue staining indicated that Ch scaffolds devoid of AuNPs expressed almost no toxicity while the Ch/AuNPs composite scaffolds expressed a very limited toxicity only at higher doses. The Ch/AuNPs scaffold promotes cell attachment, growth and proliferation with almost no cytotoxicity.

Functional enhancement of chitosan and nanoparticles in cell culture, tissue engineering, and pharmaceutical applications

As a biomaterial, chitosan has been widely used in tissue engineering, wound healing, drug delivery, and other biomedical applications. It can be formulated in a variety of forms, such as powder, film, sphere, gel, and fiber. These features make chitosan an almost ideal biomaterial in cell culture applications, and cell cultures arguably constitute the most practical way to evaluate biocompatibility and biotoxicity. The advantages of cell cultures are that they can be performed under totally controlled environments, allow high throughput functional screening, and are less costly, as compared to other assessment methods. Chitosan can also be modified into multilayer composite by combining with other polymers and moieties to alter the properties of chitosan for particular biomedical applications. This review briefly depicts and discusses applications of chitosan and nanoparticles in cell culture, in particular, the effects of chitosan and nanoparticles on cell adhesion, cell survival, and the underlying molecular mechanisms: both stimulatory and inhibitory influences are discussed. Our aim is to update the current status of how nanoparticles can be utilized to modify the properties of chitosan to advance the art of tissue engineering by using cell cultures.

Preparation of hybrid hydrogel containing Ag nanoparticles by a green in situ reduction method

In this Article, large and uniform Ag nanoparticle-containing hybrid hydrogels were prepared by in situ reduction of Ag ions in cross-linked tapioca dialdehyde starch (DAS)-chitosan hydrogels. In the hybrid hydrogels, chitosan was chosen as a macromolecular cross-linker because of its abundant source and good biocompatibility. The hybrid hydrogel showed good water-swelling properties, which could be controlled by varying the ratio of chitosan to tapioca DAS in the hydrogel. The reductive aldehyde groups in the cross-linked hydrogels could be used to reduce Ag ions to Ag nanoparticles without any additional chemical reductants. Interestingly, by controlling the reduction conditions such as the tapioca DAS concentration, aqueous AgNO(3) concentration, reaction time, and aqueous ammonium concentration, Ag nanoparticles with different sizes and morphologies were obtained. Because of their biocompatibility, degradable constituents, mild reaction conditions, and controlled preparation of Ag nanoparticles, these tapioca DAS-chitosan/Ag nanoparticle hybrid hydrogels show promise as functional hydrogels.

Gold-nanoparticle-stabilized pluronic micelles exhibiting glutathione triggered morphology evolution properties

Nanocomposites constructed from metallic nanoparticles and amphiphilic copolymers have attracted substantial interest for various potential applications. Here we report on the nanocomposites prepared through cross-linking pluronic micelles with gold nanoparticles. The covalent binding of gold nanoparticles onto the micelles and the thermoresponsibility of the system was followed via ultraviolet-visible spectroscopy, dynamic light scattering, transmission electron microscopy, and fluorescence spectroscopy. The gold-nanoparticle-stabilized pluronic micelles can take thiol-exchange reaction with glutathione and their morphology spontaneously evolved and reassembled into large "vesicular"-like nanocapsules. Obvious temperature responsibility was followed in the gold-nanoparticle-stabilized pluronic micelles system and also the glutathione triggered nanocapsules systems. It is believed that the high stability and glutathione responsibility of the Au-NPs shell-cross-linked micelles allowed for high potential in drug delivery and biosensors.

Synthesis of gold and silver nanoparticles stabilized with glycosaminoglycans having distinctive biological activities

Metal nanoparticles have been studied for their anticoagulant and anti-inflammatory efficacy in various models. Specifically, gold and silver nanoparticles exhibit properties that make these ideal candidates for biological applications. The typical synthesis of gold and silver nanoparticles incorporates contaminants that could pose further problems. Here we demonstrate a clean method of synthesizing gold and silver nanoparticles that exhibit biological functions. These nanoparticles were prepared by reducing AuCl(4) and AgNO(3) using heparin and hyaluronan as both reducing and stabilizing agents. The particles show stability under physiological conditions and narrow size distributions for heparin particles and wider distribution for hyaluronan particles. Studies show that the heparin nanoparticles exhibit anticoagulant properties. Additionally, either gold- or silver-heparin nanoparticles exhibit local anti-inflammatory properties without any significant effect on systemic hemostasis upon administration in carrageenan-induced paw edema models. In conclusion, gold and silver nanoparticles complexed with heparin demonstrated effective anticoagulant and anti-inflammatory efficacy, having potential in various local applications.

Surface-potential-regulated transmembrane and cytotoxicity of chitosan/gold hybrid nanospheres

Chitosan-gold hybrid nanospheres with varying surface zeta potentials were designed as a model system to investigate cell internalization. Gold nanoparticle was selected as optical marker to facilitate the visualization of the hybrid polymeric nanosphere internalization course and the localization in the cell by dark-field optical microscopy and transmission electron microscopy. It is found that surface potential has significant biological implications in the transmembrane efficiency, intracellular fate, and cytotoxicity of the hybrid nanospheres. Compared to those with lower surface potential, the spheres with higher surface potential show a faster cell uptake and enhance the nucleus targeting. However, too high a surface potential may destabilize the cell membrane and induce cell damage as well as cytotoxicity. These finding can help us to design suitable drug or gene nanocarriers with low cytotoxicity and high delivering ability.

Multifunctional nanocarriers for cell imaging, drug delivery, and near-IR photothermal therapy

Multifunctional nanocarriers based on chitosan/gold nanorod (CS-AuNR) hybrid nanospheres have been successfully fabricated by a simple nonsolvent-aided counterion complexation method. Anticancer drug cisplatin was subsequently loaded into the obtained hybrid nanospheres, utilizing the loading space provided by the chitosan spherical matrix. In vitro cell experiments demonstrated that the CS-AuNR hybrid nanospheres can not only be utilized as contrast agents for real-time cell imaging but also serve as a near-infrared (NIR) thermotherapy nanodevice to achieve irradiation-induced cancer cell death owing to the unique optical properties endowed by the encapsulated gold nanorods. In addition, an effective attack on the cancer cells by the loaded anticancer drug cisplatin has also been observed, rendering the obtained nanocarriers an all-in-one system possessing drug delivery, cell imaging, and photothermal therapy functionalities.