Evaporative self-assembly from complex DNA-colloid suspensions

Self-Organization via Dewetting in Polymeric Assemblies

Dewetting is a spontaneous process involving a thin liquid film that minimizes interfacial energy by reducing the surface area via the generation of defects on the film. In industry, dewetting is regarded as a problem that results in defects or a heterogeneous surface; however, in this study, dewetting is intentionally induced to create various patterns at intended positions spontaneously with polymeric materials and nanoparticles. The dewetting-induced patterning process is conducted by controlling the capillary force and evaporation ratio through an evaporative self-assembly system. The linear-polymeric arrays on the substrate played an important role in modifying the surface geometry and treatment for a heterogeneous surface, and an additional patterning process is performed on patterned arrays to create dewetting-induced self-organizing patterns. Here, this method is used to introduce material arrays with specific shapes such as dots, dumbbells, potbellies, Vs, and trapezoids.

Deposition patterns formed by the evaporation of linear diblock copolymer solution nanodroplets on solid surfaces

The evaporation-induced deposition pattern of the linear diblock copolymer solution has attracted attention in recent years. Given its critical applications, we study deposition patterns of the linear diblock copolymer solution nanodroplet on a solid surface (the wall) by molecular dynamics simulations. This study focuses on the influence of the nonbonded interaction strength, including the interaction between the wall and polymer blocks (ɛAW and ɛBW), the interaction between the solvent and the wall (ɛSW), and the interaction between polymer blocks (ɛAB). Conditions leading to diverse deposition patterns are explored, including the coffee-ring and the volcano-like structures. The formation of the coffee-ring structure is attributed to receding interfaces, the heterogeneity inside the droplet, and the self-assembly of polymer chains. This study contributes to the establishment of guidelines for designing deposition patterns of the linear diblock copolymer solution nanodroplet, which facilitates practical applications such as inkjet printing.

Drying of bio-colloidal sessile droplets: Advances, applications, and perspectives

Drying of biologically-relevant sessile droplets, including passive systems such as DNA, proteins, plasma, and blood, as well as active microbial systems comprising bacterial and algal dispersions, has garnered considerable attention over the last decades. Distinct morphological patterns emerge when bio-colloids undergo evaporative drying, with significant potential in a wide range of biomedical applications, spanning bio-sensing, medical diagnostics, drug delivery, and antimicrobial resistance. Consequently, the prospects of novel and thrifty bio-medical toolkits based on drying bio-colloids have driven tremendous progress in the science of morphological patterns and advanced quantitative image-based analysis. This review presents a comprehensive overview of bio-colloidal droplets drying on solid substrates, focusing on the experimental progress during the last ten years. We provide a summary of the physical and material properties of relevant bio-colloids and link their native composition (constituent particles, solvent, and concentrations) to the patterns emerging due to drying. We specifically examined the drying patterns generated by passive bio-colloids (e.g., DNA, globular, fibrous, composite proteins, plasma, serum, blood, urine, tears, and saliva). This article highlights how the emerging morphological patterns are influenced by the nature of the biological entities and the solvent, micro- and global environmental conditions (temperature and relative humidity), and substrate attributes like wettability. Crucially, correlations between emergent patterns and the initial droplet compositions enable the detection of potential clinical abnormalities when compared with the patterns of drying droplets of healthy control samples, offering a blueprint for the diagnosis of the type and stage of a specific disease (or disorder). Recent experimental investigations of pattern formation in the bio-mimetic and salivary drying droplets in the context of COVID-19 are also presented. We further summarized the role of biologically active agents in the drying process, including bacteria, algae, spermatozoa, and nematodes, and discussed the coupling between self-propulsion and hydrodynamics during the drying process. We wrap up the review by highlighting the role of cross-scale in situ experimental techniques for quantifying sub-micron to micro-scale features and the critical role of cross-disciplinary approaches (e.g., experimental and image processing techniques with machine learning algorithms) to quantify and predict the drying-induced features. We conclude the review with a perspective on the next generation of research and applications based on drying droplets, ultimately enabling innovative solutions and quantitative tools to investigate this exciting interface of physics, biology, data sciences, and machine learning.

Effect of Nanoparticle Addition on Evaporation of Jet Fuel Liquid Films and Nanoparticle Deposition Patterns during Evaporation

Jet fuel-based nanofluid fuel has been proposed for improving the energy density and utilization efficiency of jet fuel that is widely applied in aircraft powered by aviation turbine engines. To recognize the evaporation behavior of the formed liquid film as a jet fuel-based nanofluid sprayed onto the engine wall or blades, this paper presents the evaporation and deposition characteristics of the jet fuel-based nanofluid liquid film adhering on the hydrophilic substrate. The changes in contact line, contact angle, volume, and deposition pattern during liquid film evaporation under different substrate temperatures, different nanoparticle concentrations, and different kinds of nanoparticle additions were investigated. The effect of nano-Al addition on the evaporation kinetics and deposition pattern of the nano-Al/jet fuel (nAl/JF) nanofluid fuel liquid film was explored. Repeated pinning and de-pinning of contact lines during evaporation occurred, resulting in the formation of concentric multi-ring deposition patterns. The addition of nano-Al increased the evaporation rate and shortened the evaporation lifetime, demonstrating a promotion effect on jet fuel liquid film evaporation. The existence of an energy barrier shows that the movement of three-phase contact lines on the hydrophilic solid surface presented not a continuous sliding behavior but a "stick-slip" behavior, and there were multiple jumps in contact lines and contact angles. Finally, a comparison was made with the deposition pattern of jet fuel liquid films with different graphite and Fe nanoparticle additions during evaporation. The mechanism of deposition phenomena was deeply revealed by the analysis of capillary flow and Marangoni recirculation.

Micro-deposition control of polysaccharides on evaporative air-LC interface to design quickly swelling hydrogels

Uniaxial orientation is highly desirable for fabricating advanced soft materials. Liquid crystal (LC) polymer deposition was strategically manipulated at the air-LC interface, by controlling the drying temperature and initial concentration of aqueous solution of xanthan gum in a limited space. Interface-assisted orientation led to membrane-like depositions bridging the millimeter-scale gap between the substrates both, vertically and horizontally. The applicability of this approach lies in synchronization of the molecular orientation beyond their individual LC domains into the condensed state. Cross-polarized microscopy and SEM analysis correlated the orientation of the deposited polymer with the controlled mobility of xanthan gum LC domains at the evaporative interface. Subsequently, a phase diagram was prepared for the variety of oriented structures, depending upon the drying conditions. The deposited membrane behaved as an oriented hydrogel showing reversible anisotropic swelling/deswelling only along its thickness.

The effect of particle wettability on the stick-slip motion of the contact line

Contact line dynamics is crucial in determining the deposition patterns of evaporating colloidal droplets. Using high-speed interferometry, we directly observe the stick-slip motion of the contact line in situ and are able to resolve the instantaneous shape of the inkjet-printed, evaporating pico-liter drops containing nanoparticles of varying wettability. Integrated with post-mortem optical profilometry of the deposition patterns, the instantaneous particle volume fraction and hence the particle deposition rate can be determined. The results show that the stick-slip motion of the contact line is a strong function of the particle wettability. While the stick-slip motion is observed for nanoparticles that are less hydrophilic (i.e., particle contact angle θ ≈ 74° at the water-air interface), which results in a multiring deposition, a continuous receding of the contact line is observed for more hydrophilic nanoparticles (i.e., θ ≈ 34°), which leaves a single-ring pattern. A model is developed to predict the number of particles required to pin the contact line based on the force balance of the hydrodynamic drag, interparticle interactions, and surface tension acting on the particles near the contact line with varying particle wettability. A three-fold increase in the number of particles required for pinning is predicted when the particle wettability increases from the wetting angle of θ ≈ 74° to θ ≈ 34°. This finding explains why particles with greater wettability form a single-ring pattern and those with lower wettability form a multi-ring pattern. In addition, the particle deposition rate is found to depend on the particle wettability and vary with time.

Multi-ring Deposition Pattern of Drying Droplets

We propose a theory for the multi-ring pattern of the deposits that are formed when droplets of the suspension are dried on a substrate. Assuming a standard model for the stick-slip motion of the contact line, we show that as droplets evaporate many concentric rings of deposits are formed but are taken over by a solid-circle pattern in the final stage of drying. An analytical expression is given to indicate when the ring pattern changes to a solid-circle pattern during the evaporation process. The results are in qualitative agreement with existing experiments, and the other predictions on how the evaporation rate, droplet radius, and receding contact angle affect the pattern are all subject to an experimental test.

Exploring drying pattern of a sessile droplet of genomic DNA in the presence of hematite nanoparticles

For the first time, drying pattern of a sessile droplet of genomic DNA, in the presence of hematite nanoparticles was sighted by polarizing optical microscopy (POM) in this research article. POM results indicated that only at an appreciably high concentration of hematite nanoparticles dried pattern of deoxyribonucleic acid from calf thymus (CT-DNA) was altered. Iron hybridized cetylpyridinium chloride was utilized for the preparation of iron oxide nanoparticles through hydrothermal method. Fourier transforms infrared spectroscopy (FTIR) and powder x-ray diffraction (PXRD) studies confirmed the formation of highly crystalline hematite i.e. α-Fe₂O₃ nanoparticles. Morphology of the synthesized nanoparticle was visualized by transmission electron microscope (TEM) and field emission scanning electron microscope (FESEM), which revealed that nanoparticles were rhombohedral in shape with a size of 45 ± 10 nm. Based upon all the findings, hydrothermal growth mechanism was also proposed having bilayer protection of surfactant around the nanoparticles. UV-Vis spectroscopy and fluorescence spectroscopy were explored to study the affinity of thus prepared nanoparticles towards calf thymus deoxyribonucleic acid (CT-DNA). The low value of binding constant calculated from the spectroscopy data confirmed the weak interaction between nanoparticles and the CT-DNA.

A New Label-Free Technique for Analysing Evaporation Induced Self-Assembly of Viral Nanoparticles Based on Enhanced Dark-Field Optical Imaging

Nanoparticle self-assembly is a complex phenomenon, the control of which is complicated by the lack of appropriate tools and techniques for monitoring the phenomenon with adequate resolution in real-time. In this work, a label-free technique based on dark-field microscopy was developed to investigate the self-assembly of nanoparticles. A bio-nanoparticle with complex shape (T4 bacteriophage) that self-assembles on glass substrates upon drying was developed. The fluid flow regime during the drying process, as well as the final self-assembled structures, were studied using dark-field microscopy, while phage diffusion was analysed by tracking of the phage nanoparticles in the bulk solutions. The concentrations of T4 phage nanoparticles and salt ions were identified as the main parameters influencing the fluid flow, particle motion and, consequently, the resulting self-assembled structure. This work demonstrates the utility of enhanced dark-field microscopy as a label-free technique for the observation of drying-induced self-assembly of bacteriophage T4. This technique provides the ability to track the nano-sized particles in different matrices and serves as a strong tool for monitoring self-assembled structures and bottom-up assembly of nano-sized building blocks in real-time.

A technique based on droplet evaporation to recognize alcoholic drinks

Chromatography is, at present, the most used technique to determine the purity of alcoholic drinks. This involves a careful separation of the components of the liquid elements. However, since this technique requires sophisticated instrumentation, there are alternative techniques such as conductivity measurements and UV-Vis and infrared spectrometries. We report here a method based on salt-induced crystallization patterns formed during the evaporation of alcoholic drops. We found that droplets of different samples form different structures upon drying, which we characterize by their radial density profiles. We prove that using the dried deposit of a spirit as a control sample, our method allows us to differentiate between pure and adulterated drinks. As a proof of concept, we study tequila.

Self-pinning of a nanosuspension droplet: Molecular dynamics simulations

Results are presented from molecular dynamics simulations of Pb(l) nanodroplets containing dispersed Cu nanoparticles (NPs) and spreading on solid surfaces. Three-dimensional simulations are employed throughout, but droplet spreading and pinning are reduced to two-dimensional processes by modeling cylindrical NPs in cylindrical droplets; NPs have radius R_{NP}≅3nm while droplets have initial R_{0}≅42nm. At low particle loading explored here, NPs in sufficient proximity to the initial solid-droplet interface are drawn into advancing contact lines; entrained NPs eventually bind with the underlying substrate. For relatively low advancing contact angle θ_{adv}, self-pinning on entrained NPs occurs; for higher θ_{adv}, depinning is observed. Self-pinning and depinning cases are compared and forces on NPs at the contact line are computed during a depinning event. Though significant flow in the droplet occurs in close proximity to the particle during depinning, resultant forces are relatively low. Instead, forces due to liquid atoms confined between the particles and substrate dominate the forces on NPs; that is, for the NP size studied here, forces are interface dominated. For pinning cases, a precursor wetting film advances ahead of the pinned contact line but at a significantly slower rate than for a pure droplet. This is because the precursor film is a bilayer of liquid atoms on the substrate surface but it is instead a monolayer film as it crosses over pinning particles; thus, mass delivery to the bilayer structure is impeded.

Hydrodynamic confinement and capillary alignment of gold nanorods

Controlling the alignment and orientation of nanorods on various surfaces poses major challenges. In this work, we investigate hydrodynamic confinement and capillary alignment of gold nanorod assembly on chemically stripe-patterned substrates. The surface patterns consist of alternating hydrophilic and hydrophobic micrometer wide stripes; a macroscopic wettability gradient enables controlling the dynamics of deposited suspension droplets. We show that drying of residual liquid on the hydrophilic stripes gives rise to spatially localized deposition and alignment of the nanorods. Moreover, a universal relation between the extent of order within the single layers of nanoparticles and the lateral dimension of the deposits is presented and discussed.

Modification for Uniform Surface of Nafion Ultrathin Film Deposited by Inkjet Printing

A lack of knowledge about the features of Nafion confined to ultrathin films at the interface has motivated additional examinations to promote the performance of polymer electrolyte membrane fuel cells (PEMFCs). In this work, we demonstrated the utilization of practical film-forming technique inkjet printing to fabricate a Nafion ultrathin film less than 10 nm thickness. However, the well-known "coffee-ring" effect caused poor quality of the printed pattern, which has restricted its application. This report describes a systematic investigation of necessary parameters such as ink concentration, substrate type, pitch, and offset for printing processes. Furthermore, post-treatment in an ethanol vapor atmosphere exhibited a significant effect on flattening and homogenizing the film surface morphology. Results show that the well-distributed Nafion ultrathin film modified by ethanol vapor annealing manifested much-improved proton conductivity.

Dynamics of the evaporative dewetting of a volatile liquid film confined within a circular ring

The dewetting dynamics of a toluene film confined within a copper ring on a deformable PMMA film is studied. The toluene film experiences evaporation and dewetting, which leads to the formation of a circular contact line around the center of the copper ring. The contact line recedes smoothly toward the copper ring at a constant velocity until reaching a dynamic "stick" state to form the first circular polymer ridge. The average receding velocity is found to be dependent on the dimensions of the copper ring (the copper ring diameter and the cross-sectional diameter of the copper wire) and the thickness of the PMMA films. A model is presented to qualitatively explain the evaporative dewetting phenomenon.

From multi-ring to spider web and radial spoke: competition between the receding contact line and particle deposition in a drying colloidal drop

Deposition morphologies of inkjet-printed colloidal drops are examined under various drying conditions, particle volume fractions, and particle sizes. Concentric multi-rings, radial spokes, spider web, foam, and island-like depositions are observed as a result of the competition between the receding contact line and particle deposition during drop drying. Experimentally measured multi-ring spacing, δR, shows good agreement with the model predicted linear correlation with the local ring radius R. The results also show that the instability near the contact line leads to the radial spoke and saw-toothed structures. The resulting wavelength of the radial structures, λ, satisfies λ ~ (3)√R and λ ~ 1/(3)√[1-RH], where RH is the relative humidity. A dimensionless parameter ξ, defined as the radial deposition growth rate to contact line velocity ratio, has been identified to determine the conditions under which the entire contact line can be pinned to leave a continuous ring deposit. Increasing the particle size while keeping the volume fraction the same is found to suppress the formation of the multi-ring deposition, due to a smaller number of particles available to pin the receding contact line.

Tuning the pore composition by two simultaneous interfacial self-assembly processes: breath figures and coffee stain

In the current paper, we prepared microstructured porous films by the breath figures approach using polymer blends consisting of polystyrene as the major component and an amphiphilic additive, either a synthetic block copolymer {two different polystyrene-b-poly[poly(ethylene glycol) methyl ether methacrylate] copolymers} or a series of commercial surfactants. Tetrahydrofuran was employed as the solvent. Confocal micro-Raman spectroscopy demonstrated the preferential location of the amphiphilic additives in the cavities of the film as a consequence of the breath figures mechanism. However, the distribution of the copolymer within the cavities varies depending upon the structure and, more precisely, the surface properties of the additives, leading to three different situations. First of all, the copolymer with a larger polystyrene segment, insoluble in the condensed water droplets, is homogeneously distributed along the whole surface of the cavities. On the contrary, when the copolymer is soluble in water (shorter polystyrene segment), it migrates inside the droplet and a coffee-stain phenomenon takes place during the water droplet evaporation, conducting to a ring-like deposition on the top edge of the cavities. Finally, when a water-soluble surfactant with high surface activity is used, the surfactant is solubilized inside the water droplets, which provokes a decrease on the surface tension and the coffee-ring effect is modified. In this situation, the copolymer covers the bottom of the pore.

Patterned deposition at moving contact lines

When a simple or complex liquid recedes from a smooth solid substrate it often leaves a homogeneous or structured deposit behind. In the case of a receding non-volatile pure liquid the deposit might be a liquid film or an arrangement of droplets depending on the receding speed of the meniscus and the wetting properties of the system. For complex liquids with volatile components as, e.g., polymer solutions and particle or surfactant suspensions, the deposit might be a homogeneous or structured layer of solute--with structures ranging from line patterns that can be orthogonal or parallel to the receding contact line via hexagonal or square arrangements of drops to complicated hierarchical structures. We review a number of recent experiments and modelling approaches with a particular focus on mesoscopic hydrodynamic long-wave models. The conclusion highlights open question and speculates about future developments.

Self-organized patterning through the dynamic segregation of DNA and silica nanoparticles

Exotic pattern formation as a result of drying of an aqueous solution containing DNA and silica nanoparticles is reported. The pattern due to segregation was found to critically depend on the relative ratio of nanoparticles and DNA, as revealed by polarization microscopy, scanning electron microscopy, and fluorescence microscopy. The blurred radial pattern that is usually observed in the drying of a colloidal solution was shown to be vividly sharpened in the presence of DNA. Uniquely curved, crescent-shaped micrometer-scale domains are generated in regions that are rich in nanoparticles. The characteristic segregated patterns observed in the present study are interpreted in terms of a large aspect ratio between the persistence length (∼50 nm) and the diameter (∼2 nm) of double-stranded DNA, and the relatively small silica nanoparticles (radius: 5 nm).

Profile control of inkjet printed silver electrodes and their application to organic transistors

We report on the cross-sectional profile control of printed electrodes fabricated from silver nanoparticle inks with water-based solvents by inkjet printing. Systematically varying the ambient conditions and time for the drying process corresponded to changes in electrode shape. In general, lower humidity levels resulted in concave electrode profiles due to the coffee-ring effect, while higher humidity levels resulted in convex profiles. Printed capacitors with trapezoidal-shaped lower electrodes showed much better electrical breakdown strength than those with concave-shaped lower electrodes. Solution-processed organic thin-film transistors with trapezoidal gate electrodes operated reproducibly and exhibited good electrical characteristics with very low gate-leakage currents. The methods can be utilized in the fabrication of printed electronic devices with stacked layers, such as thin-film capacitors and transistors.

High-resolution epifluorescence and time-of-flight secondary ion mass spectrometry chemical imaging comparisons of single DNA microarray spots

DNA microarray assay performance is commonly compromised by spot-spot probe and signal variations as well as heterogeneity within printed microspots. Accurate metrics for captured DNA target signal rely upon uniform spot distribution of both probe and target DNA to yield reliable hybridized signal. While often presumed, this is neither easily achieved nor often proven experimentally. High-resolution imaging techniques were used to determine spot heterogeneity in identical DNA array microspots comprising varied ratios of unlabeled and dye-labeled DNA probes contact-printed onto commercial arraying surfaces. Epifluorescence imaging data for individual array microspots were correlated with time-of-flight secondary ion mass spectrometry (TOF-SIMS) chemical state imaging of the same spots. Epifluorescence imaging intensity distinguished varying DNA density distributed both within a given spot and from spot to spot. TOF-SIMS chemical analysis confirmed these heterogeneous printed DNA distributions by tracking bound Cy3 dye, DNA base, and phosphate specific ion fragments often correlating to fluorescence patterns within identical spots. TOF-SIMS ion fragments originating from probe DNA and Cy3 dye are enriched in microspot centers, correlating with high fluorescence intensity regions. Both TOF-SIMS and epifluorescence support Marangoni flow effects on spot drying, with high-density DNA-Cy3 located in spot centers and nonhomogeneous DNA distribution within printed spots. Microspot image dimensional analysis results for DNA droplet spreading show differing DNA densities across printed spots. The study directly supports different DNA probe chemical and spatial microenvironments within spots that yield spot-spot signal variations known to affect DNA target hybridization efficiencies and kinetics. These variations critically affect probe-target duplex formation and DNA array signal generation.

Order-to-disorder transition in ring-shaped colloidal stains

A colloidal dispersion droplet evaporating from a surface, such as a drying coffee drop, leaves a distinct ring-shaped stain. Although this mechanism is frequently used for particle self-assembly, the conditions for crystallization have remained unclear. Our experiments with monodisperse colloidal particles reveal a structural transition in the stain, from ordered crystals to disordered packings. We show that this sharp transition originates from a temporal singularity of the flow velocity inside the evaporating droplet at the end of its life. When the deposition speed is low, particles have time to arrange by Brownian motion, while at the end, high-speed particles are jammed into a disordered phase.

Electrostatic and capillary force directed tunable 3D binary micro- and nanoparticle assemblies on surfaces

We report a simple, rapid and cost-effective method based on evaporation induced assembly to grow 3D binary colloidal assemblies on a hydrophobic/hydrophilic substrate by simple drop casting. The evaporation of a mixed colloidal drop results in ring-like or uniform area deposition depending on the concentration of particles, and thus assembly occurs at the periphery of a ring or uniformly all over the drop area. Binary colloidal assemblies of different crystal structure are successfully prepared over a wide range of size ratios (γ = small/large) from 0.06 to 0.30 by tuning the γ of the micro- and nanoparticles used during assembly. The growth mechanism of 3D binary colloidal assemblies is investigated and it is found that electrostatic forces facilitate assembly formation until the end of the evaporation process, with capillary forces also playing a role. In addition, the effects of solvent type, humidity, and salt concentration on crystal formation and ordering behaviour are also examined. Furthermore, long range, highly ordered binary colloidal assemblies can be fabricated by the choice of a low conducting solvent combined with evaporation induced assembly.

Complex Protein Patterns in Drying Droplets

We demonstrate that deposition patterns formed during drying droplets of aqueous protein solutions are complex, characteristic, and highly reproducible. Substrate, buffer as well as protein type are important factors largely influencing the patterned structure. Specifically, multiple growth zones in what we refer to as “soccer ball pattern” are formed when a droplet of albumin solution in sodium bicarbonate buffer is dried. Each growth zone has periodically patterned, concentric ringed structures surrounding a core at the center. Different macroscopic patterns are also found for streptavidin, fibrinogen, IgG antibody as well as rhodamine B base and polystyrene beads when droplets of their aqueous solutions are dried on the substrates with different degrees of hydrophilicity/hydrophobicity. Furthermore, distinguishable deposition patterns are formed in drying droplets of aqueous protein solutions containing albumin and fibrinogen at different ratios, suggesting that even the relative abundance of multiple proteins influences the deposition patterns. Since the protein pattern is reproducible for a given protein and variable among different proteins, the protein patterns from drying droplets might be useful to potentially identify a given protein under specific conditions.

Complex aggregation patterns in drying nanocolloidal suspensions: size matters when it comes to the thermomechanical stability of nanoparticle-based structures

We report the results of a model study on the interrelation among the occurrence of complex aggregation patterns in drying nanofluids, the size of the constitutive nanoparticles (NPs), and the drying temperature, which is a critical issue in the genesis of complex drying patterns that was never systematically reported before. We show that one can achieve fine control over the occurrence and topological features of these drying-mediated complex structures through the combination of the particle size, the drying temperature, and the substrate surface energy. Most importantly, we show that a transition in the occurrence of the patterns appears with the temperature and the particle size, which accounts for the size dependence of the thermomechanical stability of the aggregates in the nanoscale range. Using simple phenomenological and scaling considerations, we showed that the thermomechanical stability of the aggregates was underpinned by physical quantities that scale with the size of the NPs (R) either as R(-2) or R(-3). These insights into the size-dependent dissipation mechanisms in nanoclusters should help in designing NPs-based structures with tailored thermomechanical and environmental stability and hence with an optimized morphological stability that guarantees their long-term functional properties.

Chemical-modification-enhanced dielectrophoretic assembly of controllable and reversible silica submicrowires from nanoparticles

In this article, the dielectrophoretic (DEP) assembly of chemically-modified silica nanoparticles (SiNPs) was introduced. Five types of surface-modified SiNPs, including OH-SiNPs, COOH-SiNPs, CH(3)HPO(2)-SiNPs, PEG-SiNPs, and NH(2)-SiNPs, have been investigated. After applying an ac field with relatively high intensity and frequency, it was shown that only COOH-SiNPs and CH(3)HPO(2)-SiNPs could be self-assembled on the microelectrodes by the DEP forces. The results indicated that the anionic group modification could obviously enhance the DEP self-assembly of SiNPs on the microelectrodes. Then the DEP assembly of CH(3)HPO(2)-SiNPs was selected as a representative to be investigated further. By using Rubpy dye doped in the core of the CH(3)HPO(2)-SiNPs, the assembly process was visualized in real time by inverse fluorescence microscopy. Precise control over the frequency of the applied ac field showed that the DEP forces can assemble CH(3)HPO(2)-SiNPs from aqueous suspensions into submicrowires, and it was found that the number of assembled submicrowires between the microelectrode gaps could be well controlled with reversibility. Furthermore, the DEP assembly process of CH(3)HPO(2)-SiNPs was sensitive to the pH of the dispersed medium. These findings would provide a way to circumvent the difficulty in controlling the dielectrophoretic assembly process of nanoparticles and offer application opportunities for the DEP assembly of chemically modified SiNPs.

Dynamical density functional theory for the dewetting of evaporating thin films of nanoparticle suspensions exhibiting pattern formation

Recent experiments have shown that the striking structure formation in dewetting films of evaporating colloidal nanoparticle suspensions occurs in an ultrathin "postcursor" layer that is left behind by a mesoscopic dewetting front. Various phase change and transport processes occur in the postcursor layer that may lead to nanoparticle deposits in the form of labyrinthine, network, or strongly branched "finger" structures. We develop a versatile dynamical density functional theory to model this system which captures all these structures and may be employed to investigate the influence of evaporation or condensation, nanoparticle transport, and solute transport in a differentiated way. We highlight, in particular, the influence of the subtle interplay of decomposition in the layer and contact line motion on the observed particle-induced transverse instability of the dewetting front.

Modelling approaches to the dewetting of evaporating thin films of nanoparticle suspensions

We review recent experiments on dewetting thin films of evaporating colloidal nanoparticle suspensions (nanofluids) and discuss several theoretical approaches to describe the ongoing processes including coupled transport and phase changes. These approaches range from microscopic discrete stochastic theories to mesoscopic continuous deterministic descriptions. In particular, we describe (i) a microscopic kinetic Monte Carlo model, (ii) a dynamical density functional theory and (iii) a hydrodynamic thin film model. Models (i) and (ii) are employed to discuss the formation of polygonal networks, spinodal and branched structures resulting from the dewetting of an ultrathin 'postcursor film' that remains behind a mesoscopic dewetting front. We highlight, in particular, the presence of a transverse instability in the evaporative dewetting front, which results in highly branched fingering structures. The subtle interplay of decomposition in the film and contact line motion is discussed. Finally, we discuss a simple thin film model (iii) of the hydrodynamics on the mesoscale. We employ coupled evolution equations for the film thickness profile and mean particle concentration. The model is used to discuss the self-pinning and depinning of a contact line related to the 'coffee-stain' effect. In the course of the review we discuss the advantages and limitations of the different theories, as well as possible future developments and extensions.

Dielectrophoresis and AC-induced assembly in binary colloidal suspensions

Dielectrophoretic behaviors and assembly of a binary suspension in aqueous media are examined in the presence of nonuniform alternating current (AC) electric field. A peculiar low-frequency threshold and dielectrophoresis (DEP) crossover frequency determine the applicable frequency window for binary assembly under positive DEP, which can be effectively tuned by medium conductivity and particle size, suggesting that the dynamic double-layer effect is responsible for the interfacial polarization of micrometer to submicrometer-sized particles in aqueous suspensions. Strong effects of AC-field frequency, medium conductivity, and size ratio on binary assembly morphology have been observed. A frequency-medium conductivity phase diagram is obtained to illustrate the morphological transition of assembled colloidal aggregates from segregated, ordered assemblies to inverted segregation with the appearance of amorphous phases upon increasing frequency and/or medium conductivity, which is a direct consequence of the competition between DEP and hydrodynamic mobility. Significantly, our results demonstrate a rapid method to form hybrid nanostructured materials.

Dynamical visualization of "coffee stain phenomenon" in droplets of polymer solution via fluorescent microscopy

In the drying process of polymer solution droplets, we propose an experimental procedure for visualizing the solute concentration profile by combining the fluorescent microscopy with the lateral profile observation. We have conducted a dynamical observation of the transport process of the solute polymer toward the edge that causes the "coffee stain phenomenon". We have found that the polymer concentration increases sharply near the edge, while it remains almost constant in the central region until the last stage of drying. The method is useful to understand the dynamical process that occurs near the contact line.

Ripples in a wetting film formed by a moving meniscus

We carry out a theoretical investigation of the evolution of a wetting film formed by pressing a bubble against a solid substrate. Our model incorporates the effects of capillarity and Derjaguin-Landau-Verwey-Overbeek (DLVO) (van der Waals and electrostatic) components of the disjoining pressure. Rapid changes in the relative position of the bubble and the substrate are shown to result in surprisingly rich dynamics of wetting film deformations. Even for stable films, we find transient rippled deformations with several points of local maximum of wetting film thickness and discuss how their evolution depends on changes in the meniscus position relative to the substrate and the disjoining pressure parameters. A connection is made to the recently reported experimental observations of one such rippled deformation, the so-called wimple, characterized by a local minimum of the thickness in the center, surrounded by a ring of greater film thickness and bounded at the outer edge by the barrier rim. Guidelines are provided for experimental detection of more complex rippled deformations in stable wetting films. Development of instability is studied in a situation when the electrostatic component of disjoining pressure is destabilizing, with particular emphasis on the nonlinear evolution and rupture of the film. Potential applications of our findings to small-scale mixing and deposition of nanoparticles are discussed.