Enzyme-modified field effect transistors based on surface-conductive single-crystalline diamond

Regenerative field effect transistor biosensor for in vivo monitoring of dopamine in fish brains

The detection of dopamine, one of the neurotransmitters in cerebral physiology, is critical in studying brain activities and understanding brain functions. However, regenerative biosensor for monitoring dopamine in the progress of physiological and pathological events is still challenging, due to lack of the platform for repetitive on-line detection-regeneration cycle. Herein, we have developed a regenerated field effect transistor (FET) combined with in vivo monitoring system. In this biosensor, gold-coated magnetic nanoparticles (Fe₃O₄@AuNPs) acts as a regenerated recognition unit for dopamine. Just by simple removal of a permanent magnet, dopamine on the biosensor interface are catalyzed by tyrosinase, thus achieving the regeneration of the biosensor. As a result, this FET biosensor not only reveals high sensitivity and selectivity, but also exhibits excellent stability after 15 regeneration processing. This biosensor is capable of monitor dopamine with a linear range between 1 μmol L^-1 and 120 μmol L^-1 and low detection limit (DL) of 3.3 nmol L^-1. Then, the platform has been successfully applied in dopamine analysis in fish brain under global cerebral cortical neurons. This FET biosensor is the first to on-line and remote control the sensitivity and DL by permanent magnet. It opens the door to reusable, inexpensive and large-scale productions.

Conductive diamond: synthesis, properties, and electrochemical applications

This review summarizes systematically the growth, properties, and electrochemical applications of conductive diamond.

Water-Gated n-Type Organic Field-Effect Transistors for Complementary Integrated Circuits Operating in an Aqueous Environment

The first demonstration of an n-type water-gated organic field-effect transistor (WGOFET) is here reported, along with simple water-gated complementary integrated circuits, in the form of inverting logic gates. For the n-type WGOFET active layer, high-electron-affinity organic semiconductors, including naphthalene diimide co-polymers and a soluble fullerene derivative, have been compared, with the latter enabling a high electric double layer capacitance in the range of 1 μF cm-2 in full accumulation and a mobility-capacitance product of 7 × 10-3 μF/V s. Short-term stability measurements indicate promising cycling robustness, despite operating the device in an environment typically considered harsh, especially for electron-transporting organic molecules. This work paves the way toward advanced circuitry design for signal conditioning and actuation in an aqueous environment and opens new perspectives in the implementation of active bio-organic interfaces for biosensing and neuromodulation.

Oxidation of the silicon terminated (1 0 0) diamond surface

The oxidation of the silicon terminated (1 0 0) diamond surface is investigated with a combination of high resolution photoelectron spectroscopy, low energy electron diffraction and near edge x-ray absorption fine structure spectroscopy. The effects of molecular [Formula: see text] and [Formula: see text] dosing under UHV conditions, as well as exposure to ambient conditions, have been explored. Our findings indicate that the choice of oxidant has little influence over the resulting surface chemistry, and we attribute approximately 85% of the surface oxygen to a peroxide-bridging arrangement. Additionally, oxidation does not alter the silicon-carbon bonding at the surface and therefore the [Formula: see text] reconstruction is still present.

Biofunctional electrolyte-gated organic field-effect transistors

The surface modification of solution-gated organic field-effect transistors is investigated. The introduction of different surface groups leads to a control of the pH sensitivity, determined by the pKa value of the added surface moiety. Together with the successful demonstration of enzyme modification of the surface, this work reveals the large potential of organic SGFETs for biosensor applications.

Charge state manipulation of qubits in diamond

The nitrogen-vacancy (NV) centre in diamond is a promising candidate for a solid-state qubit. However, its charge state is known to be unstable, discharging from the qubit state NV(-) into the neutral state NV(0) under various circumstances. Here we demonstrate that the charge state can be controlled by an electrolytic gate electrode. This way, single centres can be switched from an unknown non-fluorescent state into the neutral charge state NV(0), and the population of an ensemble of centres can be shifted from NV(0) to NV(-). Numerical simulations confirm the manipulation of the charge state to be induced by the gate-controlled shift of the Fermi level at the diamond surface. This result opens the way to a dynamic control of transitions between charge states and to explore hitherto inaccessible states, such as NV(+).

The chemistry of C-H bond activation on diamond

The surface of hydrogen-terminated diamond resembles a solid hydrocarbon substrate. Interestingly, the C-H bonds on the diamond surface are not as unreactive as that of saturated hydrocarbon molecules owing to its unique surface electronic properties. The invention of C-H bond activation and C-C coupling reactions on the diamond surface allows chemists to develop powerful chemical transistors, biosensors, and photovoltaic cells on the diamond platform.

A HREELS and DFT study of the adsorption of aromatic hydrocarbons on diamond (111)

Ultrathin layers of organic molecules can be assembled on group IV (e.g., silicon, germanium, diamond) semiconductor surfaces using surface analogues of cycloaddition reactions. We present a study of the chemisorption of benzene, toluene, and styrene on the Pandey chain of C(111) using high resolution electron energy loss spectroscopy and density functional theory calculations. Two cycloaddition reactions, namely, the [4 + 2] and [2 + 2], were examined. The [4 + 2] reaction is found to be thermodynamically unfavorable on C(111), while the [2 + 2] reaction involving the ring is slightly exothermic. In the case of aromatic molecules with an external unsaturated functional group, the reaction can proceed via the external functionality, thereby preserving the aromatic ring and providing further stability. Different reactivity patterns to the C(100) surface are rationalized on the basis of steric effects imposed by the geometrical structure of the Pandey chain. Our study demonstrates the potential of employing the Pandey chain as a template for assembling one-dimensional molecular structures on the diamond surface.

Ion-sensitive field-effect transistor for biological sensing

In recent years there has been great progress in applying FET-type biosensors for highly sensitive biological detection. Among them, the ISFET (ion-sensitive field-effect transistor) is one of the most intriguing approaches in electrical biosensing technology. Here, we review some of the main advances in this field over the past few years, explore its application prospects, and discuss the main issues, approaches, and challenges, with the aim of stimulating a broader interest in developing ISFET-based biosensors and extending their applications for reliable and sensitive analysis of various biomolecules such as DNA, proteins, enzymes, and cells.