Covalent layer-by-layer functionalization of multiwalled carbon nanotubes by click chemistry

Development of Graphene-Based Polymeric Nanocomposites: A Brief Overview

Graphene (G) and its derivatives, such as graphene oxide (GO) and reduced GO (rGO), have outstanding electrical, mechanical, thermal, optical, and electrochemical properties, owed to their 2D structure and large specific surface area. Further, their combination with polymers leads to novel nanocomposites with enhanced structural and functional properties due to synergistic effects. Such nanocomposites are becoming increasingly useful in a wide variety of fields ranging from biomedicine to the electronics and energy storage applications. In this review, a brief introduction on the aforementioned G derivatives is presented, and different strategies to develop polymeric nanocomposites are described. Several functionalization methods including covalent and non-covalent approaches to increase their interaction with polymers are summarized, and selected examples are provided. Further, applications of this type of nanocomposites in the field of energy are discussed, including lithium-ion batteries, supercapacitors, transparent conductive electrodes, counter electrodes of dye-sensitized solar cells, and active layers of organic solar cells. Finally, the challenges and future outlook for G-based polymeric nanocomposites are discussed.

In situ preparation of hetero-polymers/clay nanocomposites by CUAAC click chemistry

A series of polymer/clay nanocomposites containing mechanistically two different polymers, poly(ethylene glycol) (PEG) and poly(epsilon caprolactone) (PCL), were prepared by simultaneous copper(I)-catalyzed alkyne-azide cycloaddition click reactions. Both clickable polymers, PEG-Alkyne and PCL-Alkyne, were simultaneously clicked on to azide-functional montmorillonite (MMT-N₃) nanoclay to get corresponding PEG-PCL/MMT nanocomposites. The chemical structures of the resulting nanocomposites were verified by following azide and silicone-oxygen bands using FT-IR and characteristic bands of PEG and PCL segments using ¹H-NMR spectroscopy. The combined XRD and TEM analysis confirmed that all PEG-PCL/MMT nanocomposites had partially exfoliated/intercalated morphologies. In addition, the increase of MMT-N₃ loading not only improved the onset and maximum degradation temperatures of the nanocomposites but also their char yields. Furthermore, the incorporation of MMT-N₃ in the polymer matrix did not significantly influence the crystallization behavior of both PEG and PCL segments.

Recent Advancements in Stimuli Responsive Drug Delivery Platforms for Active and Passive Cancer Targeting

The tumor-specific targeting of chemotherapeutic agents for specific necrosis of cancer cells without affecting the normal cells poses a great challenge for researchers and scientists. Though extensive research has been carried out to investigate chemotherapy-based targeted drug delivery, the identification of the most promising strategy capable of bypassing non-specific cytotoxicity is still a major concern. Recent advancements in the arena of onco-targeted therapies have enabled safe and effective tumor-specific localization through stimuli-responsive drug delivery systems. Owing to their promising characteristic features, stimuli-responsive drug delivery platforms have revolutionized the chemotherapy-based treatments with added benefits of enhanced bioavailability and selective cytotoxicity of cancer cells compared to the conventional modalities. The insensitivity of stimuli-responsive drug delivery platforms when exposed to normal cells prevents the release of cytotoxic drugs into the normal cells and therefore alleviates the off-target events associated with chemotherapy. Contrastingly, they showed amplified sensitivity and triggered release of chemotherapeutic payload when internalized into the tumor microenvironment causing maximum cytotoxic responses and the induction of cancer cell necrosis. This review focuses on the physical stimuli-responsive drug delivery systems and chemical stimuli-responsive drug delivery systems for triggered cancer chemotherapy through active and/or passive targeting. Moreover, the review also provided a brief insight into the molecular dynamic simulations associated with stimuli-based tumor targeting.

Functionalization of carbon nanotubes by combination of controlled radical polymerization and "grafting to" method

This paper reviews the recent advances in non-covalent and covalent tethering of small molecules and polymer chains onto carbon nanotube (CNT) and its derivatives. The functionalized CNT has recently attracted great attention because of an increasing number of its potential applications. In non-covalent functionalization of CNT, the sp²-hybridized network plays a crucial role. The non-covalent grafting of small molecules and polymers can mainly be carried out through hydrogen bonding and π-stacking interactions. In covalent functionalization of CNT, condensation, cycloaddition, and addition reactions play a key role. Polymer modification has been reported by using three main methods of "grafting from", "grafting through", and also "grafting to". The "grafting from" and "grafting through" rely on propagation of polymer chains in the presence of CNT modified with initiator and double bond moieties, respectively. In "grafting to" method, which is the main aim of this review, the pre-fabricated polymer chains are mainly grafted onto the surface using coupling reactions. The coupling reactions are used for grafting pre-fabricated polymer chains and also small molecules onto CNT. Recent studies on grafting polymer chains onto CNT via "grafting to" method have focused on the pre-fabricated polymer chains by conventional and controlled radical polymerization (CRP) methods. CRP includes reversible activation, atom transfer, degenerative (exchange) chain transfer, and reversible chain transfer mechanisms, and could result in polymer-grafted CNT with narrow polydispersity index of the grafted polymer chains. Based on the mentioned mechanisms, nitroxide-mediated polymerization, atom transfer radical polymerization, and reversible addition-fragmentation chain transfer are known as the three commonly used CRP methods. Such polymer-modified CNT has lots of applications in batteries, biomedical fields, sensors, filtration, solar cells, etc.

Covalent layer-by-layer thin films with charge-transfer chromophores: side chain engineering for efficient Ag+ ion recognition in aqueous solutions

Covalent layer-by-layer (LbL) thin films are fabricated by a highly efficient [2+2] cycloaddition-retroelectrocyclization (CA-RE) reaction of aniline-substituted alkyne and 7,7,8,8-tetracyanoquinodimethane (TCNQ) moieties. Polystyrene bearing aniline-substituted alkyne side chains and TCNQ polyester were prepared as precursor polymers, then sequentially deposited and fixed by covalent bonds on an indium-tin-oxide (ITO) substrate. The successful alternate growth of the films was demonstrated by many techniques including absorption spectroscopy, surface roughness, and redox activities. Interestingly, the water contact angles of the film surface were dependent on the side chains of the polystyrene derivatives. When hydrophilic triethylene glycol was employed, the surface hydrophilicity was similar to that of the TCNQ polyester. In contrast, the use of hydrophobic n-hexyl groups resulted in a significant difference in the water contact angles between the polystyrene and TCNQ polyester. A similar difference occurred when the Ag+ ion recognition was studied by soaking the LbL films in aqueous solutions. The LbL films constructed from the polystyrene with triethylene glycol chains displayed a more rapid and significant recognition of Ag+ ions than those constructed from the polystyrene with n-hexyl chains.

Functional Covalent Layer-by-Layer Thin Films by [2 + 2] Cycloaddition-Retroelectrocyclization

Covalent layer-by-layer (LbL) thin films with the well-defined charge-transfer (CT) chromophores were fabricated by the highly efficient [2 + 2] cycloaddition-retroelectrocyclization (CA-RE) reaction between the dialkylaniline-substituted alkynes and 7,7,8,8-tetracyanoquinodimethane (TCNQ) moieties. The resulting thin films showed potent redox activities and Ag⁺ ion sensing ability due to the formed CT chromophores.

Mechanistic applications of click chemistry for pharmaceutical drug discovery and drug delivery

The concept of click chemistry (CC), first introduced by K.B. Sharpless, has been widely adopted for use in drug discovery, novel drug delivery systems (DDS), polymer chemistry, and material sciences. In this review, we outline novel aspects of CC related to drug discovery and drug delivery, with a brief overview of molecular mechanisms underlying each click reaction commonly used by researchers, and the main patents that paved the way for further diverse medicinal applications. We also describe recent progress in drug discovery and polymeric and carbon material-based drug delivery for potential pharmaceutical applications and advancements based on the CC approach, and discuss some intrinsic limitations of this popular conjugation reaction. The use of CC is likely to significantly advance drug discovery and bioconjugation development.

Surface-Initiated ARGET ATRP of Poly(Glycidyl Methacrylate) from Carbon Nanotubes via Bioinspired Catechol Chemistry for Efficient Adsorption of Uranium Ions

Surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) integrated with mussel-inspired polydopamine (PDA) chemistry was, for the first time, employed for controlled grafting of poly(glycidyl methacrylate) (PGMA) brushes from carbon nanotubes (CNTs). The strategy initially involved deposition of a PDA layer by spontaneous self-polymerization, which is a benign and nonsurface specific way for anchoring 2-bromoisobutyryl bromide to form initiators on the CNTs. Dense and uniform PGMA brushes were then grown via ARGET ATRP using low concentration of Cu catalyst in different solvents. With abundant highly reactive epoxy groups, the PGMA-grafted CNTs could serve as a versatile platform for further modification or functionalization. Ethylenediamine ligands were facilely introduced, imparting the functionalized CNTs with record-high adsorption ability toward uranium ions among CNTs composites. The integrated strategy combining surface-initiated ARGET ATRP technique and PDA chemistry would provide new opportunities for surface engineering of nanomaterials for advanced applications.

A new route to fabricate biocompatible hydrogels with controlled drug delivery behavior

Hydrogels for drug delivery have attracted extensive interests since they can be used for biomaterials such as contact lenses. Here, we report that biocompatible hydrogels for contact lenses with controlled drug delivery behavior can be fabricated using copolymer hydrogels and Layer-by-Layer (LbL) surface modification technique. Methyl acrylic anhydride (MAA) modified β-cyclodextrin (β-CD) (MA-β-CD) was synthesized and copolymerized with hydroxyethyl methacrylate (HEMA) to form copolymer hydrogel. The introduction of second monomer of MA-β-CD would accelerate the polymerization of hydrogel, leading to increase of residual CC groups. The structure of copolymers was characterized by differential scanning calorimetry (DSC). Transparence, equilibrium swelling ratio and contact angle of copolymer hydrogel were also detailed discussed in the work. In vitro drug release results showed that copolymer hydrogel with higher MA-β-CD content exhibited a better drug loading capacity and drug release behaviors could be tuned by MA-β-CD/monomer ratio. Finally, alkynyl functional hyaluronic acid (HA-BP) and nitrine functional chitosan (CS-N3) were synthesized and covalently cross-linked to copolymer hydrogel surface using LbL technique through click chemistry. The successful LbL multilayers were confirmed by X-ray Photoelectron Spectroscopy (XPS). Resultsofcytotoxicityexperiment revealed that the hydrogels were biocompatible since they could support the growth of cells.

Recent advances in organic–inorganic well-defined hybrid polymers using controlled living radical polymerization techniques

Controlled living radical polymerizations, such as ATRP and RAFT polymerization, could be utilized for the preparation of well-defined organic–inorganic hybrid polymers based on POSS, PDMS, silica nanoparticles, graphene, CNTs and fullerene.

Preparation and properties of nylon 6/sulfonated graphene composites by an in situ polymerization process

Nylon 6/sulfonated graphene composites with high thermal conductivity, good mechanical properties and excellent processability were prepared using sulfonated graphene as a precursor by an in situ polymerization process.

Polydopamine-functionalized multi-walled carbon nanotubes-supported palladium–lead bimetallic alloy nanoparticles as highly efficient and robust catalysts for ethanol oxidation

High performance electrocatalysts of palladium–lead bimetallic alloy nanoparticles anchored onto polydopamine-functionalized multi-walled carbon nanotubes (PDA-MWCNTs) were fabricated by a facile one-step strategy.

Nickel stabilized by triazole-functionalized carbon nanotubes as a novel reusable and efficient heterogeneous nanocatalyst for the Suzuki–Miyaura coupling reaction

The synthesis of a MWCNT-grafted nickel catalyst through “click” reaction of azide-functionalized carbon nanotubes with propargyl alcohol, for the Suzuki–Miyaura coupling reaction.

Methacrylate Copolymers with Liquid Crystalline Side Chains for Organic Gate Dielectric Applications

Polymers for all-organic field-effect transistors are under development to cope with the increasing demand for novel materials for organic electronics. Besides the semiconductor, the dielectric layer determines the efficiency of the final device. Poly(methyl methacrylate) (PMMA) is a frequently used dielectric. In this work, the chemical structure of this material was stepwise altered by incorporation of cross-linkable and/or self-organizing comonomers to improve the chemical stability and the dielectric properties. Different types of cross-linking methods were used to prevent dissolution, swelling or intermixing of the dielectric e.g. during formation processes of top electrodes or semiconducting layers. Self-organizing comonomers were expected to influence the dielectric/semiconductor interface, and moreover, to enhance the chemical resistance of the dielectric. Random copolymers were obtained by free radical and reversible addition-fragmentation chain transfer (RAFT) polymerization. With 6-[4-(4'-cyanophenyl)phenoxy]alkyl side chains having hexyl or octyl spacer, thermotropic liquid crystalline (LC) behavior and nanophase separation into smectic layers was observed, while copolymerization with methyl methacrylate induced molecular disorder. In addition to chemical, thermal and structural properties, electrical characteristics like breakdown field strength (EBD) and relative permittivity (k) were determined. The dielectric films were studied in metal-insulator-metal setups. EBD appeared to be strongly dependent on the type of electrode used and especially the ink formulation. Cross-linking of PMMA yielded an increase in EBD up to 4.0 MV/cm with Ag and 5.7 MV/cm with

PEDOT

PSS electrodes because of the increased solvent resistance. The LC side chains reduce the ability for cross-linking resulting in decreased breakdown field strengths.

Effectiveness of carbon nanotube–cobalt ferrite nanocomposites for the adsorption of rhodamine B from aqueous solutions

Magnetic cobalt ferrite–carbon nanotube nanocomposites are effective and reusable adsorbents for remediation of wastewaters contaminated with dyes.

Synthesis of electroconductive hydrogel films by an electro-controlled click reaction and their application to drug delivery systems

Electroconductive hydrogels are composed of 3-dimensionally structured hydrogels and conducting molecules with electrical, optical, and reversible redox properties.

Covalently functionalized carbon nanotube supported Pd nanoparticles for catalytic reduction of 4-nitrophenol

Carbon nanotubes (CNTs) were covalently functionalized via 1,3-dipolar cycloaddition reaction under microwave conditions. The functionalized CNTs were characterized by thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), N2 adsorption isotherms and Raman spectroscopy. The surface concentration of phenolic hydroxyl groups on the surface of CNTs was adjusted by varying the reaction temperature. In addition, we prepared Pd nanoparticle/CNT (Pd NP/CNT) nanocomposites through strong electrostatic adsorption and hydrogen reduction. The results indicated that the functional groups could not only improve the dispersion of CNTs in water, but also enhance the interaction between Pd precursors and CNTs, thus preventing small Pd NPs (average diameter of 1.5 nm) from agglomerating. Furthermore, the Pd NP/CNT-220 nanocomposites showed high catalytic activity for the reduction of 4-nitrophenol. The turnover frequency (TOF) of this catalyst was up to 18 min(-1), which was attributed to the small size and uniform distribution of Pd NPs on the surface of CNTs.

Well-defined “clickable” copolymers prepared via one-pot synthesis

Novel propargyl-functional block copolymers were prepared via a fast and easy one-pot synthesis without the need to protect the propargyl functionality.

Noncovalent functionalization of multi-walled carbon nanotubes as metal-free catalysts for the reduction of nitrobenzene

Multi-walled carbon nanotubes were functionalized noncovalently with small organic molecules containing specific ketonic carbonyl groups. The comparison of intrinsic activities for a series of catalysts indicates that carbonyl groups are active sites in the reduction of nitrobenzene.

Nanoparticles produced by ring-opening metathesis polymerization using norbornenyl-poly(ethylene oxide) as a ligand-free generic platform for highly selective in vivo tumor targeting

We described a norbornenyl-poly(ethylene oxide) nanoparticles ligand-free generic platform, made fluorescent with straightforward preparation by ring-opening metathesis polymerization (ROMP). Our method allowed to easily obtain a drug delivery system (DDS) with facilitated functionalization by means of azide-alkyne click chemistry and with a high selectivity for the tumor in vivo, while cellular internalization is obtained without cell targeting strategy. We demonstrated that our nanoparticles are internalized by endocytosis and colocalized with acidic intracellular compartments in two models of aggressive tumoral cell lines with low prognostic and limited therapeutic treatments. Our nanoparticles could be of real interest to limit the toxicity and to increase the clinical benefit of drugs suffering rapid clearance and side effects and an alternative for cancers with poorly efficient therapeutic solutions by associating the drug delivery in the tumor tissue with an acid-sensitive release system.

Mesoporous silica coating on carbon nanotubes: layer-by-layer method

It is of great interest to develop a simple, general, and easy-handling procedure for mesoporous silica coating. A facile, single-step method to coat iron oxide nanoparticles has been reported by Hyeon's group. However, up to present, this method only successfully applied to those zero-dimensional nanostructures heavily capped by cetyltrimethyl ammonium bromide (CTAB); no others are reported. It is unknown how this simple method is feasible in coating those nanostructures not capped by CTAB. Herein, using carbon nanotubes (CNTs) as the model, through an analogous layer-by-layer assembly method, many more CTAB molecules were found to anchor to CNTs, on which uniform mesoporous silica shells can successfully be formed by Hyeon's coating method. We believe that this contribution will pave the way for advancing the single-step method to become a general protocol in the mesoporous silica coating field.

Constructing metal nanoparticle multilayers with polyphenylene dendrimer/gold nanoparticles via "click" chemistry

Multilayer films composed of azide-functional polymer and polyphenylene dendrimer-stabilized gold nanoparticles with alkynes in their peripheries have been fabricated using a layer-by-layer (LBL) approach via "click" chemistry. This method permits facile covalent linking of the polymer/nanoparticle interlayers in the mixture of DMF and water, which provides a general and powerful technique for preparing uniform nanoparticle (NP) thin films. The deposition process is linearly related to the number of bilayers as monitored by UV-vis spectroscopy. The multilayer structure and morphology have been characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and contact angle.

Ionic liquid integrated multiwalled carbon nanotube in a poly(vinylidene fluoride) matrix: formation of a piezoelectric β-polymorph with significant reinforcement and conductivity improvement

Multiwalled carbon nanotubes (MWNTs) are functionalized covalently with ionic liquid (IL, 3-aminoethyl imidazolium bromide) which helps good dispersion of IL-functionalized MWNTs (MWNT-IL) in the poly(vinylidene fluoride) (PVDF) matrix. Analysis of transmission electron microscopy (TEM) micrographs suggests ∼10 nm coating thickness of MWNTs by ILs, and the covalent linkage of ILs with MWNTs is confirmed from FT-IR and Raman spectra. PVDF nanocomposites with full β-polymorphic (piezoelectric) form are prepared using MWNT-IL by both the solvent cast and melt-blending methods. The FE-SEM and TEM micrographs indicate that IL-bound MWNTs are homogeneously dispersed within the PVDF matrix. Increasing MWNT-IL concentration in the composites results in increased β polymorph formation with a concomitant decrease of the α polymorph, and a 100% β polymorph formation occurs for 1 wt % MWNT-IL in both the fabrication conditions. A differential scanning calorimetry (DSC) study shows that the MWNT-ILs are an efficient nucleating agent for PVDF crystallization preferentially nucleating the β form due to its dipolar interactions with PVDF. The glass transition temperature (T(g)) gradually increases with an increase in MWNT-IL concentration, and the storage modulus (G') of the composites increases significantly, showing a maximum increase of 101.3% for 0.5 wt % MWNT-IL. The Young's modulus increases with MWNT-IL concentration, and analysis of the data using the Halpin-Tsai equation suggests that at low concentration they adopt an orientation parallel to the film surface; however, at higher MWNT-IL concentration it is randomly oriented. The tensile strength also increases with an increase in MWNT-IL concentration, and both the Young's modulus and the tensile strength of solvent cast films are lower than melt-blended samples. The elongation at break in the solvent cast samples shows a maximum, but in melt-blended samples it decreases continuously with increasing MWNT-IL concentration. The composites exhibit a very low conductivity percolation threshold at 0.05 wt %, and the three-dimensional conducting network is produced. Higher conductivity (∼1 S/cm for 1% MWNT-IL) than other MWNT/PVDF composites has been attributed to the anchored ionic liquid.

Surface-initiated Polymerization of Azidopropyl Methacrylate and its Film Elaboration via Click Chemistry

Azidopropyl methacrylate (AzPMA), a functional monomer with a pendent azido group, polymerizes from surfaces and provides polymer brushes amenable to subsequent elaboration via click chemistry. In DMF at 50 °C, click reactions between poly(AzPMA) brushes and an alkynylated dye proceed with >90% conversion in a few minutes. However, in aqueous solutions, reaction with an alkyne-containing poly(ethylene glycol) methyl ether (mPEG, Mn=5000) gives <10% conversion after a 12-h reaction at room temperature. Formation of copolymers with AzPMA and polyethylene glycol methyl ether methacrylate (mPEGMA) enables control over the hydrophilicity and functional group density in the copolymer to increase the yield of aqueous click reactions. The copolymers show reaction efficiencies as high as 60%. These studies suggest that for aqueous applications such as bioconjugation via click chemistry, control over brush hydrophilicity is vital.

One-dimensional hybrid nanostructures: synthesis via layer-by-layer assembly and applications

Assembly techniques are being intensely sought for preparing nanocomposites with tunable compositions and structures. Compared to other assembly techniques, the layer-by-layer (LBL) technique, which is based on the electrostatic attraction between oppositely charged species, provides a simple, versatile and powerful method to synthesize various types of one-dimensional (1D) hybrid nanostructures. In this review, we begin with the developments in the LBL synthesis of nanocomposites, with a focus on our recent results for synthesizing 1D hybrid nanostructures via LBL assembly. Compared to previous LBL processes, we conducted the in situ reaction on the surface of 1D nanostructures via electrostatic attraction between oppositely charged 1D nanostructures and ions in the solution in an attempt to produce 1D hybrid nanostructures. Moreover, these core-shell nanostructures can be transformed into nanotubes by the removal of the templates. The as-synthesized 1D hybrid nanostructures and nanotubes with tunable composition exhibited enhanced performance for various applications such as gas sensors, lithium-ion batteries and cellular imaging.

Reactive polymer multilayers fabricated by covalent layer-by-layer assembly: 1,4-conjugate addition-based approaches to the design of functional biointerfaces

We report on conjugate addition-based approaches to the covalent layer-by-layer assembly of thin films and the post-fabrication functionalization of biointerfaces. Our approach is based on a recently reported approach to the "reactive" assembly of covalently cross-linked polymer multilayers driven by the 1,4-conjugate addition of amine functionality in poly(ethyleneimine) (PEI) to the acrylate groups in a small-molecule pentacrylate species (5-Ac). This process results in films containing degradable β-amino ester cross-links and residual acrylate and amine functionality that can be used as reactive handles for the subsequent immobilization of new functionality. Layer-by-layer growth of films fabricated on silicon substrates occurred in a supra-linear manner to yield films ≈ 750 nm thick after the deposition of 80 PEI/5-Ac layers. Characterization by atomic force microscopy (AFM) suggested a mechanism of growth that involves the reactive deposition of nanometer-scale aggregates of PEI and 5-Ac during assembly. Infrared (IR) spectroscopy studies revealed covalent assembly to occur by 1,4-conjugate addition without formation of amide functionality. Additional experiments demonstrated that acrylate-containing films could be postfunctionalized via conjugate addition reactions with small-molecule amines that influence important biointerfacial properties, including water contact angles and the ability of film-coated surfaces to prevent or promote the attachment of cells in vitro. For example, whereas conjugation of the hydrophobic molecule decylamine resulted in films that supported cell adhesion and growth, films treated with the carbohydrate-based motif D-glucamine resisted cell attachment and growth almost completely for up to 7 days in serum-containing media. We demonstrate that this conjugate addition-based approach also provides a means of immobilizing functionality through labile ester linkages that can be used to promote the long-term, surface-mediated release of conjugated species and promote gradual changes in interfacial properties upon incubation in physiological media (e.g., over a period of at least 1 month). These covalently cross-linked films are relatively stable in biological media for prolonged periods, but they begin to physically disintegrate after ≈ 30 days, suggesting opportunities to use this covalent layer-by-layer approach to design functional biointerfaces that ultimately erode or degrade to facilitate elimination.