Nanophase separation in polystyrene-polyfluorene block copolymers thin films prepared through the breath figure procedure

Antimicrobial Porous Surfaces Prepared by Breath Figures Approach

Herein, efficient antimicrobial porous surfaces were prepared by breath figures approach from polymer solutions containing low content of block copolymers with high positive charge density. In brief, those block copolymers, which were used as additives, are composed of a polystyrene segment and a large antimicrobial block bearing flexible side chain with 1,3-thiazolium and 1,2,3-triazolium groups, PS54-b-PTTBM-M44, PS54-b-PTTBM-B44, having different alkyl groups, methyl or butyl, respectively. The antimicrobial block copolymers were blended with commercial polystyrene in very low proportions, from 3 to 9 wt %, and solubilized in THF. From these solutions, ordered porous films functionalized with antimicrobial cationic copolymers were fabricated, and the influence of alkylating agent and the amount of copolymer in the blend was investigated. Narrow pore size distribution was obtained for all the samples with pore diameters between 5 and 11 µm. The size of the pore decreased as the hydrophilicity of the system increased; thus, either as the content of copolymer was augmented in the blend or as the copolymers were quaternized with methyl iodide. The resulting porous polystyrene surfaces functionalized with low content of antimicrobial copolymers exhibited remarkable antibacterial efficiencies against Gram positive bacteria Staphylococcus aureus, and Candida parapsilosis fungi as microbial models.

Hierarchically porous bio-inspired films prepared by combining “breath figure” templating and selectively degradable block copolymer directed self-assembly

Hierarchically porous bio-inspired honeycomb films prepared by combining the breath figure bottom-up process and selectively degradable block copolymer directed self-assembly.

Single-step shaping of fluorescent polymer beads by a reverse breath figure approach

A fast and facile approach is proposed to decorate a substrate with micrometric fluorescent polymer beads of many different materials.

Self-assembly of graphene oxide at interfaces

Due to its amphiphilic property, graphene oxide (GO) can achieve a variety of nanostructures with different morphologies (for example membranes, hydrogel, crumpled particles, hollow spheres, sack-cargo particles, Pickering emulsions, and so on) by self-assembly. The self-assembly is mostly derived from the self-concentration of GO sheets at various interfaces, including liquid-air, liquid-liquid and liquid-solid interfaces. This paper gives a comprehensive review of these assembly phenomena of GO at the three types of interfaces, the derived interfacial self-assembly techniques, and the as-obtained assembled materials and their properties. The interfacial self-assembly of GO, enabled by its fantastic features including the amphiphilicity, the negatively charged nature, abundant oxygen-containing groups and two-dimensional flexibility, is highlighted as an easy and well-controlled strategy for the design and preparation of functionalized carbon materials, and the use of self-assembly for uniform hybridization is addressed for preparing hybrid carbon materials with various functions. A number of new exciting and potential applications are also presented for the assembled GO-based materials. This contribution concludes with some personal perspectives on future challenges before interfacial self-assembly may become a major strategy for the application-targeted design and preparation of functionalized carbon materials.

Multiple interfaces in self-assembled breath figures

Progress in the breath figure method is reviewed by emphasizing the role of the multiple interfaces and the applications of honeycomb films in separation, biocatalysis, biosensing, templating, stimuli-responsive surfaces and adhesive surfaces.

Hierarchically structured multifunctional porous interfaces through water templated self-assembly of ternary systems

Herein, a facile water-assisted templating approach, the so-called breath figures method, has been employed to prepare multifunctional and hierarchically structured porous patterned films with order at different length scales (nano- and micrometer). Tetrahydrofuran solutions of ternary blends consisting on high molecular weight polystyrene, an amphiphilic block copolymer, polystyrene-b-poly[poly(ethylene glycol) methyl ether methacrylate] (PS(40)-b-P(PEGMA300)(48)), and a fluorinated copolymer, polystyrene-b-poly(2,3,4,5,6-pentafluorostyrene) (P5FS(21)-b-PS(31)), have been used to obtain films varying the proportion of the three components. Confocal micro-Raman spectroscopy and atomic force microscopy demonstrated the preferential location of the different functionalities in the films. Because of the breath figures mechanism, the amphiphilic copolymer yield pores enriched in hydrophilic functionality while the fluorinated copolymer remained mixed with the PS matrix and eventually also forming self-assembled nanostructures at the surface. As a consequence, two levels of order can be observed, i.e., micrometer size pores with nanostructured domains due to the block copolymer self-assembly. In addition, the distribution of the amphiphilic copolymer within the holes is not regular being located principally on the edges of the cavities. This can be attributed to the coffee stain phenomenon occurring in the water droplets as a consequence of the segregation of the block copolymers to the droplets and their self-assembly.

Hierarchically structured materials from block polymer confinement within bicontinuous microemulsion-derived nanoporous polyethylene

The self-assembly behavior of block polymers under strong two-dimensional and three-dimensional confinement has been well-studied in the past decade. Confinement effects enable access to a large suite of morphologies not typically observed in the bulk. We have used nanoporous polyethylene, derived from a polymeric bicontinuous microemulsion, as a novel template for the confinement of several different cylinder-forming block polymer systems: poly(isoprene-b-2-vinylpyridine), poly(styrene-b-isoprene), and poly(isoprene-b-dimethylsiloxane). The resultant materials exhibit unique hierarchical arrangements of structure with two distinct length scales. First, the polyethylene template imparts a disordered, microemulsion-like periodicity between bicontinuous polyethylene and block polymer networks with sizes on the order of 100 nm. Second, the block polymer networks display internal periodic arrangements produced by the spontaneous segregation of their incompatible constituents. The microphase-separated morphologies observed are similar to those previously reported for confinement of block polymers in cylindrical pores. However, at present, the morphologies are spatially variant in a complex manner, due to the three-dimensionally interconnected nature of the confining geometry and its distribution in pore sizes. We have further exploited the unique structure of the polyethylene template to generate new hierarchically structured porous monoliths. Poly(isoprene-b-2-vinylpyridine) is used as a model system in which the pyridine block is cross-linked, post-infiltration, and the polyethylene template is subsequently extracted. The resultant materials possess a three-dimensionally continuous pore network, of which the pore walls retain the unique, microphase-separated morphology of the confined block polymer.

Micropatterned polyvinyl butyral membrane for acid-base diodes

Until now, polyvinyl alcohol (PVA) gel cylinders have been used in electrolyte diodes as a connecting element between the acidic and alkaline reservoirs. In this paper, a new connecting element is reported: a breath figure templated polyvinyl butyral (PVB) membrane prepared with dip-coating from a dichloromethane solution of the polymer in a humid atmosphere. The procedure gives a 1.5-2 μm thick membrane with a hexagonal pattern, the average characteristic length of which is 1 μm. After an acidic etching, it was found to be a good connecting element. The voltage-current characteristics and dynamic properties of PVA and PVB were measured and compared. The PVB membrane has a faster response to voltage changes than the PVA gel, but in both cases, there was a slow drift in the current that prevented it from reaching a steady state. Reproducible characteristics can be obtained, however, after the current reaches a well-defined quasi-steady state.

Self-organized honeycomb-patterned microporous polystyrene thin films fabricated by calix[4]arene derivatives

Calix[4]arene derivatives bearing carboxyl groups at the upper rim and alkyl groups at the lower rim were synthesized. Micrometer-size porous honeycomb-patterned thin films were prepared by evaporating chloroform solution of polystyrene containing the calixarene derivatives under high humidity. These films were coated on gold electrodes of QCM, and the high-frequency changes were observed to detect volatile organic compounds such as dichlorobenzene.