Stress and DNA assembly differences on cantilevers gold coated by resistive and e-beam evaporation techniques

A Genosensor Based on the Modification of a Microcantilever: A Review

When the free end of a microcantilever is modified by a genetic probe, this sensor can be used for a wider range of applications, such as for chemical analysis, biological testing, pharmaceutical screening, and environmental monitoring. In this paper, to clarify the preparation and detection process of a microcantilever sensor with genetic probe modification, the core procedures, such as probe immobilization, complementary hybridization, and signal extraction and processing, are combined and compared. Then, to reveal the microcantilever's detection mechanism and analysis, the influencing factors of testing results, the theoretical research, including the deflection principle, the establishment and verification of a detection model, as well as environmental influencing factors are summarized. Next, to demonstrate the application results of the genetic-probe-modified sensors, based on the classification of detection targets, the application status of other substances except nucleic acid, virus, bacteria and cells is not introduced. Finally, by enumerating the application results of a genetic-probe-modified microcantilever combined with a microfluidic chip, the future development direction of this technology is surveyed. It is hoped that this review will contribute to the future design of a genetic-probe-modified microcantilever, with further exploration of the sensitive mechanism, optimization of the design and processing methods, expansion of the application fields, and promotion of practical application.

Vertically aligned nanostructured gold microtube assisted by polymer template with combination of wet phase inversion and Cu grid mask

Tubular architecture has been extensively exploited in diverse applications such as solar cells and sensors. However, the synthesis of microtubes with high aspect ratio using polymer templates has been rarely reported. In this study, we designed a facile avenue for the synthesis of well-aligned Au nanoparticle-agglomerate microtubes with an aspect ratio of ~ 30 using a hollow polyetherimide (PEI) template. The combination of wet phase inversion and use of a Cu grid mask enabled straightforward production of a hollow PEI template with vertically aligned tubular architecture. During wet-phase inversion, exchange between a solvent (N-methyl-2-pyrrolidone) and a non-solvent (water) occurred at the corners of the square mask cells rather than along their side, thereby producing pores at the corners due to geometrical and entropic factors. The hollow microtubes were comprised of agglomerated Au nanoparticles that coated the inner surfaces of the pores during an electroless plating process performed after wet-phase inversion. This finding is applicable to diverse applications such as sensors and catalysis.

The pH-dependent elastic properties of nanoscale DNA films and the resultant bending signals for microcantilever biosensors

The diverse mechanical properties of nanoscale DNA films on solid substrates have a close correlation with complex detection signals of micro-/nano-devices. This paper is devoted to formulating several multiscale models to study the effect of pH-dependent ionic inhomogeneity on the graded elastic properties of nanoscale DNA films and the resultant bending deflections of microcantilever biosensors. First, a modified inverse Debye length is introduced to improve the classical Poisson-Boltzmann equation for the electrical potential of DNA films to consider the inhomogeneous effect of hydrogen ions. Second, the graded characteristics of the particle distribution are taken into consideration for an improvement in Parsegian's mesoscopic potential for both attraction-dominated and repulsion-dominated films. Third, by the improved interchain interaction potential and the thought experiment about the compression of a macroscopic continuum DNA bar, we investigate the diversity of the elastic properties of single-stranded DNA (ssDNA) films due to pH variations. The relevant theoretical predictions quantitatively or qualitatively agree well with the relevant DNA experiments on the electrical potential, film thickness, condensation force, elastic modulus, and microcantilever deflections. The competition between attraction and repulsion among the fixed charges and the free ions endows the DNA film with mechanical properties such as a remarkable size effect and a non-monotonic behavior, and a negative elastic modulus is first revealed in the attraction-dominated ssDNA film. There exists a transition between the pH-sensitive parameter interval and the pH-insensitive one for the bending signals of microcantilevers, which is predominated by the initial stress effect in the DNA film.

Effect of surface charge state on the surface stress of a microcantilever

The surface charge state at a liquid-solid interface is important to the variations in the physical/chemical properties of adsorbate film such as surface stress and the ensuing tip deflection of the microcantilever. The well-known Stoney's equation, derived more than 100 years ago, conceals the film electrical properties with the replacement of substrate deformation induced by adsorptions of particles. This implicit expression provides a shortcut to circumvent the difficulty in identifying some film properties, however, it limits the capacity to ascertain the relation between surface stress variation and the surface charge state. In this paper, we present an analytical expression to quantify the cantilever deflection/surface stress and the film potential difference by combining the piezoelectric theory and Poisson-Boltzmann equation for electrolyte solution. This updated version indicates that the two linear correlations between surface stress and surface charge density or the bias voltage are not contradictory, but two aspects of one thing under different conditions. Based on Parsegian's mesoscopic interaction potential, a multiscale prediction for the piezoelectric coefficient of double-stranded DNA (dsDNA) film is done, and the results show that the distinctive size effect with variations in salt concentration and nucleotide number provides us with an opportunity to obtain a more sensitive potential-actuated microcantilever sensor by careful control of packing conditions.

Influence of disordered packing pattern on elastic modulus of single-stranded DNA film on substrate

Determining mechanical properties of single-stranded DNA film grafted on gold surface is critical for analysis and design of DNA-microcantilever biosensors. However, it remains an open issue to quantify the relations among the disordered packing patterns of DNA chains, the mechanical properties of DNA film and the resultant biodetection signals. In this paper, first, the bending experiment of microcantilever is carried out to provide the basic data for a refined multi-scale model of microcantilever deflection induced by ssDNA immobilization. In the model, the complicated interactions in DNA film (consisting of DNA, water molecules and salt ions) are simplified as effective interactions among coarse-grained soft cylinders, which can reveal the varieties of DNA structure in the circumstances of different lengths and salt concentrations; Ohshima's distribution of net charge density is employed to incorporate compositional variations of salt ions along the thickness direction into the Strey's mesoscopic empirical potential on molecular interactions in DNA solutions, and the related model parameters for ssDNA film on substrate are obtained from the curve fitting with our microcantilever bending experiment. Second, the effect of nanoscopic distribution of DNA chains on elastic modulus of ssDNA film is studied by a thought experiment of uniaxial compression, and the disordered patterns of DNA chains are generated by Monte Carlo method. Simulation results point out that nanoscale ssDNA film shows size effect, gradient and diversity in elastic modulus and can achieve maximum stiffness by preferring a disordered and energetically favorable packing pattern collectively induced by electrostatic force, hydration force and configurational entropy.

Hydration induced stress on DNA monolayers grafted on microcantilevers

Surface tethered single-stranded DNA films are relevant biorecognition layers for oligonucleotide sequence identification. Also, hydration induced effects on these films have proven useful for the nanomechanical detection of DNA hybridization. Here, we apply nanomechanical sensors and atomic force microscopy to characterize in air and upon varying relative humidity conditions the swelling and deswelling of grafted single stranded and double stranded DNA films. The combination of these techniques validates a two-step hybridization process, where complementary strands first bind to the surface tethered single stranded DNA probes and then slowly proceed to a fully zipped configuration. Our results also demonstrate that, despite the slow hybridization kinetics observed for grafted DNA onto microcantilever surfaces, ex situ sequence identification does not require hybridization times typically longer than 1 h, while quantification is a major challenge.

Structural modifications of gold thin films produced by thiol-derivatized single-stranded DNA immobilization

Recent experiments have reported an opposite sign of the differential surface stress produced on gold-coated cantilevers by a thiol-derivatized single-stranded DNA (SH-DNA) immobilization process. The sign of the surface stress depends on the method used to evaporate the gold thin film, being compressive (negative) or tensile (positive) for e-beam or resistively deposited gold, respectively. This study investigates the origin of this effect by means of a combination of x-ray diffraction and x-ray photoelectron spectroscopy. Both e-beam and resistively grown gold thin films are characterized to find the subtle differences responsible for this intriguing stress behaviour. Somewhat remarkably, these studies show a tight relation between the surface structure of the gold overlayer and the SH-DNA immobilization efficiency. The average grain size variation seems to correlate well with the differential surface stress triggered by the SH-DNA immobilization previously reported. These results suggest that the relation of the probe molecules with the surface structure must be considered to understand surface stress changes.