Structure and properties of redox active self-assembled monolayers formed from norbornylogous bridges

Origins of non-ideal behaviour in voltammetric analysis of redox-active monolayers

Disorder in redox-active monolayers convolutes electrochemical characterization. This disorder can come from pinhole defects, loose packing, heterogeneous distribution of redox-active headgroups, and lateral interactions between immobilized redox-active molecules. Identifying the source of non-ideal behaviour in cyclic voltammograms can be challenging as different types of disorder often cause similar non-ideal cyclic voltammetry behaviour such as peak broadening, large peak-to-peak separation, peak asymmetry and multiple peaks for single redox processes. This Review provides an overview of ideal voltammetric behaviour for redox-active monolayers, common manifestations of disorder on voltammetric responses, common experimental parameters that can be varied to interrogate sources of disorder, and finally, examples of different types of disorder and how they impact electrochemical responses.

Investigation of the Interfacial Electron Transfer Kinetics in Ferrocene-Terminated Oligophenyleneimine Self-Assembled Monolayers

In this article, the synthesis, characterization, and cyclic voltammetry (CV) measurements are reported for ferrocene-terminated oligophenyleneimine (OPI_Fc) and ferrocene-terminated conjugation-broken oligophenyleneimine (CB-OPI_Fc) self-assembled monolayers (SAMs) in two different electrolytes, namely, 1-ethyl-3-methylimidazolium-bis (trifluoromethyl-sulfonyl) imide (EMITFSI) ionic liquid and tetrabutylammonium hexafluorophosphate (Bu₄NPF₆) in acetonitrile (0.1 M solution). The SAMs were synthesized on Au surfaces by the sequential imine condensation reactions. CV was used to investigate the kinetics of electron transfer (ET) to the ferrocene, and it was observed that the standard ET rate constant (k⁰) is a strong function of the electrolyte nature as well as the chemical composition of the SAM. Interestingly, when 0.1 M Bu₄NPF₆ in acetonitrile was used as the electrolyte, all of the SAMs exhibited quite similar k⁰ values. However, in the case of the ionic liquid, we found that k⁰ dramatically varies for each SAM and trends as OPI 6_Fc > CB3-OPI 6_Fc > CB5-OPI 6_Fc > CB3,5-OPI 6_Fc. We also examined the temperature dependence of ET kinetics for OPI 2_Fc, OPI 4_Fc, OPI 8_Fc, CB3-OPI 6_Fc, CB5-OPI 6_Fc, and CB3,5-OPI 6_Fc SAMs in EMITFSI ionic liquid. It was found that the activation energies of the ET in these SAMs are very similar (∼0.2 eV). Moreover, it was observed that ln k⁰ varies linearly with the molecular length for three SAMs, OPI 2_Fc, OPI 4_Fc, and OPI 8_Fc. These findings suggest that the ET to the ferrocene in OPI_Fc and CB-OPI _Fc SAMs takes place via a direct tunneling mechanism.

Electron-Transfer Properties of Phenyleneethynylene Linkers Bound to Gold via a Self-Assembled Monolayer of Molecular Tripod

The three-point adsorption of tripod-shaped molecules enables the formation of robust self-assembled monolayers (SAMs) on solid surfaces, where the component molecules are fixed in a strictly upright orientation. In the present study, SAMs of a rigid molecular tripod consisting of an adamantane core and three CH₂SH groups were employed to arrange ferrocene on a gold surface through oligo(p-phenyleneethynylene) linkers. Cyclic voltammetry of the monolayers demonstrated high surface coverage of ferrocene, yet the molecular interaction among adjacent ferrocene units was negligible. This was because of the extended intermolecular distance caused by the bulky tripod framework. The rates of electron transfer from the ferrocene to the gold surface through different linker lengths were determined by electrochemical measurements, from which the decay factor for oligo(p-phenyleneethynylene) wire was evaluated.

Structural changes in a Schiff base molecular assembly initiated by scanning tunneling microscopy tip

We report the controlled self-organization and switching of newly designed Schiff base (E)-4-((4-(phenylethynyl) benzylidene) amino) benzenethiol (EPBB) molecules on a Au (111) surface at room temperature. Scanning tunneling microscopy and spectroscopy (STM/STS) were used to image and analyze the conformational changes of the EPBB molecules. The conformational change of the molecules was induced by using the STM tip while increasing the tunneling current. The switching of a domain or island of molecules was shown to be induced by the STM tip during scanning. Unambiguous fingerprints of the switching mechanism were observed via STM/STS measurements. Surface-enhanced Raman scattering was employed, to control and identify quantitatively the switching mechanism of molecules in a monolayer. Density functional theory calculations were also performed in order to understand the microscopic details of the switching mechanism. These calculations revealed that the molecular switching behavior stemmed from the strong interaction of the EPBB molecules with the STM tip. Our approach to controlling intermolecular mechanics provides a path towards the bottom-up assembly of more sophisticated molecular machines.

Electrochemistry of the self-assembled monolayers of dyads consisting of tripod-shaped trithiol and bithiophene on gold

Self-assembled monolayers (SAMs) of tripod-shaped trithiols, consisting of an adamantane core with three CH2SH legs and a bithiophene group, were prepared on a Au(111) surface. Adsorption in a tripod-like fashion was supported by polarization modulation-infrared reflection absorption spectroscopy (PM-IRRAS) of the SAMs, which indicated the absence of free SH groups. Cyclic voltammetry showed an irreversible cathodic wave due to reductive desorption. The SAM also showed an anodic wave due to the single-electron oxidation of the bithiophene moiety without concomitant desorption of the molecules. Although oxidation was irreversible in the absence of a protecting group, it became reversible with the introduction of a terminal phenyl group. The charge of the oxidation was one-third that of the reductive desorption, confirming a three-point adsorption. The surface coverage was ca. 50% of that expected for the anti bithiophene conformation, which suggested that an increase in the surface area per molecule had been caused by the presence of an energetically high-lying syn conformer. In accordance with this, the line shape of the oxidation wave suggested an electrostatic repulsive interaction between neighboring molecules.

Ideal redox behavior of the high-density self-assembled monolayer of a molecular tripod on a Au(111) surface with a terminal ferrocene group

A dyad consisting of a tripod-shaped trithiol with an adamantane core and a terminal ferrocenyl group linked through ap-phenyleneethynylene bridge was synthesized. The trithiol formed a stable self-assembled monolayer (SAM) on Au(111), wherein each molecule is bound to the surface by three-point adsorption using all sulfur atoms, with confirmation by PM-IRRAS and XPS analyses. Cyclic voltammetry of the SAM showed a line shape typical of an ideal adsorbed system, that is, a monolayer with negligible electrostatic interaction among the terminal ferrocenyl groups. Thus, a rare SAM was achieved, in which the component molecules were isolated from adjacent molecules without the coadsorption of nonelectroactive molecules.

Self-assembled monolayers formed using zero net curvature norbornylogous bridges: the influence of potential on molecular orientation

A new class of electroactive norbornylogous bridges, with no net curvature, that form self-assembled monolayers on gold electrodes were studied by electrochemistry and in situ infrared spectroscopy. The influence of the electrode potential on the structure and conformation of the self-assembled monolayers (SAMs) was investigated. This was performed using two different lengths of rigid norbornylogous bridges with terminal ferrocene moieties and ω-hydroxyalkanethiols. It was found that single component monolayers of the rigid norbornylogous bridges changed their tilt angle with their transition from the ferrocene to ferricinium. However, when the norbornylogous SAMs were diluted with ω-hydroxyalkanethiols the tilt angle remained unchanged upon oxidation of ferrocene to ferricinium. It was also observed that the tilt angle of the diluent, ω-hydroxyalkanethiols changed at potentials exceeding 500 mV.

Electrochemistry of redox-active self-assembled monolayers

Redox-active self-assembled monolayers (SAMs) provide an excellent platform for investigating electron transfer kinetics. Using a well-defined bridge, a redox center can be positioned at a fixed distance from the electrode and electron transfer kinetics probed using a variety of electrochemical techniques. Cyclic voltammetry, AC voltammetry, electrochemical impedance spectroscopy, and chronoamperometry are most commonly used to determine the rate of electron transfer of redox-activated SAMs. A variety of redox species have been attached to SAMs, and include transition metal complexes (e.g., ferrocene, ruthenium pentaammine, osmium bisbipyridine, metal clusters) and organic molecules (e.g., galvinol, C(60)). SAMs offer an ideal environment to study the outer-sphere interactions of redox species. The composition and integrity of the monolayer and the electrode material influence the electron transfer kinetics and can be investigated using electrochemical methods. Theoretical models have been developed for investigating SAM structure. This review discusses methods and monolayer compositions for electrochemical measurements of redox-active SAMs.

Kinetic dispersion in redox-active dithiocarbamate monolayers

Dithiocarbamates (dtcs) have been implicated as important gold-binding groups in molecular electronics. Dtcs have two alkane branches connected at a single anchoring point that has a bidentate resonance structure. Forming readily in situ by the combination of secondary amines and CS(2), dtcs adsorb quickly onto gold surfaces. Electroactive self-assembled monolayers (eSAMs) were prepared by the coadsorption of ferrocene dialkyldithiocarbamates (Fc dtcs) with diluent dtcs on gold electrodes. Short and long alkane chains were used (11 and 16 methylene groups, respectively), and a polar ester group was incorporated. Cyclic voltammetry (CV) shows that the electrochemistry is quasi-reversible. At high surface coverage, the peak separations and full widths at half-maximum for Fc dtcs deviate from theoretical values and are analogous to that of ferrocene alkane thiols on gold at high surface coverage. Importantly, these features do not change at low Fc dtc surface coverage as observed for ferrocene alkane thiols. Ferrocene dtcs were used to label monolayer defect sites and to demonstrate the exchange of surface-bound dtcs with solution dtcs. Finally, the rate of electron transfer was analyzed using Tafel plots and ac voltammetric methods. The results for both techniques are consistent with a kinetically disperse population of redox sites. The length of the diluent alkane chain appears to have an effect on the distribution of electron-transfer rates, likely because of the eSAM structure. This work indicates that structurally, Fc dtc eSAMs are fundamentally different from alkane thiol SAMs on gold.