Carboxyl enriched monodisperse porous Fe3O4 nanoparticles with extraordinary sustained-release property

Au/Fe3O4-based nanozymes with peroxidase-like activity integrated in immunochromatographic strips for highly-sensitive biomarker detection

Because of their simplicity, rapidity, and cost-effectiveness, immunochromatographic strips (ICTs) have been widely used as an effective tool in various fields. However, typical strips for the preliminary screening suffer from limited detection sensitivity, particularly in biomarker detection with trace concentration. Herein, to tackle this challenge, we integrated homemade gold-decorated Fe₃O₄ nanoparticles (Au/Fe₃O₄ NPs) with flexible strips, exploring the excellent peroxidase-like activity of this labeled material, and then enhancing the detection sensitivity via signal amplification. The limit of detection (LOD) of the strips is as low as 0.05 mIU mL^-1 when human chorionic gonadotropin (hCG) is as a biomarker model, which is 500 times lower than that of the traditional color-based strip. Overall, our results demonstrated the potential for Au/Fe₃O₄ NP based-ICTs for the rapid detection of the biomarker in an instrument-free and point-of-care testing format.

Intumescent flame retardancy and smoke suppression of Eucommia ulmoides gum/natural rubber blends based on synergistic g-C3N4@Fe3O4 nanocomposites

A flame retardant synergist (g-C3N4@Fe3O4) was designed through an in situ co-precipitation method by using graphitized carbon nitride (g-C3N4) and Fe3O4, and its structure was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). A series of different contents of g-C3N4@Fe3O4 and intumescent flame retardant (IFR) were simultaneously added into eucommia ulmoides gum/natural rubber (EUG/NR) blends to improve the flame retardancy and reduce the smoke release. The flame retardancy, smoke suppression performance, thermal degradation behaviors and thermal stability of EUG/NR blends were evaluated by the limiting oxygen index (LOI), UL-94, cone calorimetry test (CCT) and thermogravimetric analysis (TGA). The results showed that using g-C3N4@Fe3O4 as a flame retardant synergist, the LOI value of the 9 phr g-C3N4@Fe3O4 synergist (EUG/NR 5) blend was 29.5%, which was much higher than the 20.0% of the original composite. Moreover, the 6 phr g-C3N4@Fe3O4 synergist (EUG/NR 4) and EUG/NR 5 passed the UL-94 V-0 rating, while the pristine EUG/NR blends showed no rating. Moreover, the total heat release rate (THR), peak of heat release rate (PHRR) and total smoke production (TSP) of the EUG/NR blends in the CCT test were much lower than those of the pristine EUG/NR blends. In particular, PHRR, THR and TSP of EUG/NR 5 decreased by 37.1%, 16.2% and 18.0%, respectively. This indicated that the introduction of g-C3N4@Fe3O4 decreased the release of combustible gases. TGA results also showed that the addition of g-C3N4@Fe3O4 accelerated the thermal degradation of the EUG/NR blends and changed the thermal degradation mechanism of the EUG/NR blends, indicating the synergistic effect of g-C3N4@Fe3O4. Finally, a possible degradation mechanism of EUG/NR blend composites was proposed.

Preparation of iron oxide mesoporous magnetic microparticles as novel multidrug carriers for synergistic anticancer therapy and deep tumor penetration

The preparation of mesoporous iron oxides with controllable physiochemical properties for effective therapeutic drug delivery remains a formidable challenge. Herein, iron oxide mesoporous magnetic microparticles (IO-MMMs) were prepared by a modified reverse hard-templating approach using, for the first time, acid-prepared mesoporous spheres (APMS) as the hard silica template. The obtained mesostructures exhibited remarkably high surface area and large pore volumes (S_BET = 240 m²/g and V_pore = 0.55 cm³/g), controllable average sizes, generally uniform morphologies, and excellent biocompatibilities, allowing them to achieve optimal drug release in cancer cells and tumor tissues. IO-MMM carriers were able to co-load high amounts of hydrophilic chemotherapeutic drugs (Dox or Daun) and/or hydrophobic hormonal anticancer drugs (Tam), and release them sustainably in a pH-dependent manner, utilizing the fluorescence of Daun to real-time trace the intracellular drug distribution, and employing Daun/Tam to treat cancer by combined chemo/hormonal therapy. Cytotoxicity assays against different types of cancerous cells showed that the combinatory Daun/Tam@IO-MMM formulation significantly reduced the viability of metastatic MCF7 and KAIMRC1 breast as well as HCT8 colorectal cancer cells, with the least potency towards non-cancerous normal primary cells (up to 10-fold). Electron, flow, and live confocal microscopy imaging confirmed that the loaded vehicles were successfully and differentially uptaken by the different tested cells, gradually releasing their payloads, and causing apoptotic cell death. Importantly, compared to free drugs, Daun/Tam@IO-MMMs displayed enhanced drug accumulation in patient breast primary tumor tissues, deeply penetrating into the tumor region and killing the tumor cells inside. The designed carriers described here, thus, constitute a novel promising magnetic mesoporous smart system that entraps different kinds of drugs and release them in a controlled manner for combinatorial chemo/hormonal cancer theranostics. This multifactorial platform may open new avenues in cancer therapy as efficient synergistic antitumor system through overcoming limitations of conventional cancer therapy.

A one-pot and modular self-assembly strategy for high-performance organized enzyme cascade bioplatforms based on dual-functionalized protein–PtNP@mesoporous iron oxide hybrid

A one-pot and modular self-assembly strategy for high-performance enzyme cascade bioplatform based on dual-functionalized protein/inorganic hybrid.

One-pot synthesis of poly (acrylic acid)-stabilized Fe3O4 nanocrystal clusters for the simultaneously qualitative and quantitative detection of biomarkers in lateral flow immunoassay

Lateral flow immunoassay (LFIAs) has found widespread applications in point-of-care testing (POCT). However, conventional LFIAs based on gold nanoparticles can only provide limited information (qualitative or semi-quantitative information) and suffer from low sensitivity. To address this issue, we developed a Fe₃O₄ nanocrystal cluster-based highly sensitive LFIAs for the simultaneously qualitative and quantitative detection of trace-level biomarkers. The synthesis of poly (acrylic acid)-stabilized superparamagnetic nanocrystal clusters (PAA-MNCs) is a one-pot, simple and convenient technique, and the polyelectrolyte coating provides enough stability, good dispersity and downstream conjugation sites. Using these PAA-MNCs as a label nanomaterial in LFIAs, a model biomarker (amino-terminal pro-B-type natriuretic peptide (NT-proBNP) antibody) was detected qualitatively and quantitatively. The results show that tests have a qualitative detection limit of 100 pg/mL and a quantitative linear relationship between the magnetic signal and antibody concentration (20-8000 pg/mL) under the optimized experimental conditions. The developed LFIA based on PAA-MNCs for NT-proBNP could be used for the clinical assessment of heart failure, offering tremendous potential for personalized medicine.

Molecular mechanisms for delicately tuning the morphology and properties of Fe3O4 nanoparticle clusters

After being oxidized, dihydric alcohols drive the formation of monodisperse Fe₃O₄ particle clusters.

Selective Removal of Hemoglobin from Blood Using Hierarchical Copper Shells Anchored to Magnetic Nanoparticles

Hierarchical copper shells anchored on magnetic nanoparticles were designed and fabricated to selectively deplete hemoglobin from human blood by immobilized metal affinity chromatography. Briefly, CoFe₂O₄ nanoparticles coated with polyacrylic acid were first synthesized by a one-pot solvothermal method. Hierarchical copper shells were then deposited by immobilizing Cu²⁺ on nanoparticles and subsequently by reducing between the solid CoFe₂O₄@COOH and copper solution with NaBH₄. The resulting nanoparticles were characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectrometry, X-ray photoelectron spectroscopy, and vibrating sample magnetometry. The particles were also tested against purified bovine hemoglobin over a range of pH, contact time, and initial protein concentration. Hemoglobin adsorption followed pseudo-second-order kinetics and reached equilibrium in 90 min. Isothermal data also fit the Langmuir model well, with calculated maximum adsorption capacity 666 mg g⁻¹. Due to the high density of Cu²⁺ on the shell, the nanoparticles efficiently and selectively deplete hemoglobin from human blood. Taken together, the results demonstrate that the particles with hierarchical copper shells effectively remove abundant, histidine-rich proteins, such as hemoglobin from human blood, and thereby minimize interference in diagnostic and other assays.

Magnetism-assisted modification of screen printed electrode with magnetic multi-walled carbon nanotubes for electrochemical determination of dopamine

A simple and sensitive dopamine (DA) electrochemical sensor was fabricated based on magnetism-assisted modification of screen printed electrode (SPE) with magnetic multi-walled carbon nanotubes (mMWCNTs). The mMWCNTs modified electrodes (mMWCNTs/SPE) combines the advantages of SPE and the simultaneous contribution of magnetic nanoparticles (MNPs) and MWCNTs, increasing sensitivity and selectivity of DA detection. The linearity was found between 5μM to 180μM, with the limit of detection (LOD) of 0.43μM. In the mean time, this modified electrode exhibited excellent selectivity for DA detection with almost no interference from ascorbic acid (AA), which co-exists with DA in many bio-samples and causes common interference. Finally, this novel electrode has been applied to determine DA concentration in spiked human blood serum and satisfactory recovery was found in the range of 97.43-102.94% with the RSDs of less than 2.27%. This work developed a sensitive and reliable electrochemical analytical method based on mMWCNTs/SPE, which exhibits great potential for diagnosis of the diseases related to DA.

Investigation on a smart nanocarrier with a mesoporous magnetic core and thermo-responsive shell for co-delivery of doxorubicin and curcumin: a new approach towards combination therapy of cancer

A novel and smart MIO-P(NIPAM-MAm) nanocomposite has been prepared for combinational delivery of Dox and Cur for cancer treatment.

Double loaded self-decomposable SiO₂ nanoparticles for sustained drug release

Sustained drug release for a long duration is a desired feature of modern drugs. Using double-loaded self-decomposable SiO2 nanoparticles, we demonstrated sustained drug release in a controllable manner. The double loading of the drugs was achieved using two different mechanisms-the first one via a co-growth mechanism, and the second one by absorption. A two-phase sustained drug release was firstly revealed in an in vitro system, and then further demonstrated in mice. After a single intravenous injection, the drug was controllably released from the nanoparticles into blood circulation with a Tmax of about 8 h, afterwards a long lasting release pattern was achieved to maintain drug systemic exposure with a plasma elimination half-life of approximately 28 h. We disclosed that the absorbed drug molecules contributed to the initial fast release for quickly reaching the therapeutic level with relatively higher plasma concentrations, while the "grown-in" drugs were responsible for maintaining the therapeutic level via the later controlled slow and sustained release. The present nanoparticle carrier drug configuration and the loading/maintenance release mechanisms provide a promising platform that ensures a prolonged therapeutic effect by controlling drug concentrations within the therapeutic window-a sustained drug delivery system with a great impact on improving the management of chronic diseases.

Self-assembly with orthogonal-imposed stimuli to impart structure and confer magnetic function to electrodeposited hydrogels

A magnetic nanocomposite film with the capability of reversibly collecting functionalized magnetic particles was fabricated by simultaneously imposing two orthogonal stimuli (electrical and magnetic). We demonstrate that cathodic codeposition of chitosan and Fe3O4 nanoparticles while simultaneously applying a magnetic field during codeposition can (i) organize structure, (ii) confer magnetic properties, and (iii) yield magnetic films that can perform reversible collection/assembly functions. The magnetic field triggered the self-assembly of Fe3O4 nanoparticles into hierarchical "chains" and "fibers" in the chitosan film. For controlled magnetic properties, the Fe3O4-chitosan film was electrodeposited in the presence of various strength magnetic fields and different deposition times. The magnetic properties of the resulting films should enable broad applications in complex devices. As a proof of concept, we demonstrate the reversible capture and release of green fluorescent protein (EGFP)-conjugated magnetic microparticles by the magnetic chitosan film. Moreover, antibody-functionalized magnetic microparticles were applied to capture cells from a sample, and these cells were collected, analyzed, and released by the magnetic chitosan film, paving the way for applications such as reusable biosensor interfaces (e.g., for pathogen detection). To our knowledge, this is the first report to apply a magnetic field during the electrodeposition of a hydrogel to generate magnetic soft matter. Importantly, the simple, rapid, and reagentless fabrication methodologies demonstrated here are valuable features for creating a magnetic device interface.

From porous gold nanocups to porous nanospheres and solid particles--a new synthetic approach

We report a versatile approach for the synthesis of porous gold nanocups, porous gold nanospheres and solid gold nanoparticles. Gold nanocups are formed by the slow reduction of gold salt (HAuCl4⋅3H2O) using aminoantipyrene (AAP) as a reducing agent. Adding polyvinylpyrrolidone (PVP) to the gold salt followed by reduction with AAP resulted in the formation of porous gold nanospheres. Microwave irradiation of both of these porous gold particles resulted in the formation of slightly smaller but solid gold particles. All these nanoparticles are thoroughly characterized by UV-visible spectroscopy, scanning electron microscopy (SEM), high resolution transmission electron microscopy (HR-TEM) and bright-field tomography. Due to the larger size, porous nature, low density and higher surface area, these nanomaterials may have interesting applications in catalysis, drug delivery, phototherapy and sensing.

A magnetically-separable Fe3O4nanoparticle surface grafted with polyacrylic acid for chromium(iii) removal from tannery effluents

A magnetically-separable nanoadsorbent was synthesized, and evaluated as an alternative for chromium(iii) removal from tannery effluent.

A comparative study on the structural, optical and magnetic properties of Fe3O4 and Fe3O4@SiO2 core–shell microspheres along with an assessment of their potentiality as electrochemical double layer capacitors

Study on magnetic and hyperfine properties of Fe₃O₄ and Fe₃O₄@SiO₂ microspheres. Both can be used as EDLC.

Photo-induced electric polarizability of Fe3O4 nanoparticles in weak optical fields

Using a developed co-precipitation method, we synthesized spherical Fe3O4 nanoparticles with a wide nonlinear absorption band of visible radiation. Optical properties of the synthesized nanoparticles dispersed in an optically transparent copolymer of methyl methacrylate with styrene were studied by optical spectroscopy and z-scan techniques. We found that the electric polarizability of Fe3O4 nanoparticles is altered by low-intensity visible radiation (I ≤ 0.2 kW/cm2; λ = 442 and 561 nm) and reaches a value of 107 Å3. The change in polarizability is induced by the intraband phototransition of charge carriers. This optical effect may be employed to improve the drug uptake properties of Fe3O4 nanoparticles. PACS: 33.15.Kr78.67.Bf42.70.Nq.

Influences of surface charge, size, and concentration of colloidal nanoparticles on fabrication of self-organized porous silica in film and particle forms

Studies on preparation of porous material have attracted tremendous attention because existence of pores can provide material with excellent performances. However, current preparation reports described successful production of porous material with only partial information on charges, interactions, sizes, and compositions of the template and host materials. In this report, influences of self-assembly parameters (i.e., surface charge, size, and concentration of colloidal nanoparticles) on self-organized porous material fabrication were investigated. Silica nanoparticles (as a host material) and polystyrene (PS) spheres (as a template) were combined to produce self-assembly porous materials in film and particle forms. The experimental results showed that the porous structure and pore size were controllable and strongly depended on the self-assembly parameters. Materials containing highly ordered pores were effectively created only when process parameters fall within appropriate conditions (i.e., PS surface charge ≤ -30 mV; silica-to-PS size ratio ≤0.078; and silica-to-PS mass ratio of about 0.50). The investigation of the self-assembly parameter landscape was also completed using geometric considerations. Because optimization of these parameters provides significant information in regard to practical uses, results of this report could be relevant to other functional properties.

Understanding the particokinetics of engineered nanomaterials for safe and effective therapeutic applications

Increasing numbers of engineered nanomaterials (ENMs) are being developed for therapeutic and diagnostic applications. However, the tunable and varied physicochemical properties of ENMs pose a new challenge for understanding their biological behavior, trafficking, and biodistribution. Herein the concept of "particokinetics" is introduced to address the dynamic biological behavior of ENMs at the molecular level (including gravitational sedimentation, dispersion, aggregation, and interaction with biomolecules in suspending media), cellular level (including cellular uptake, transport, biotransformation, and elimination), and whole-organism level (including absorption, distribution, metabolism, and excretion in vivo). Several mathematical modeling methods are introduced which guide a quantitative description of their biological behavior at different levels. Examples are also provided to delineate the impact of the physicochemical properties of ENMs on their particokinetics. A comprehensive understanding of the in vivo and in vitro particokinetics of ENMs will facilitate the design of tailor-made functional ENMs that act as highly effective and controllable drug-delivery systems with minimal side-effects.

Poly(acrylic acid)-modified Fe3O4 microspheres for magnetic-targeted and pH-triggered anticancer drug delivery

Monodisperse poly(acrylic acid)-modified Fe(3)O(4) (PAA@Fe(3)O(4)) hybrid microspheres with dual responses (magnetic field and pH) were successfully fabricated. The PAA polymer was encapsulated into the inner cavity of Fe(3)O(4) hollow spheres by a vacuum-casting route and photo-initiated polymerization. TEM images show that the samples consist of monodisperse porous spheres with a diameter around 200 nm. The Fe(3)O(4) spheres, after modification with the PAA polymer, still possess enough space to hold guest molecules. We selected doxorubicin (DOX) as a model drug to investigate the drug loading and release behavior of as-prepared composites. The release of DOX molecules was strongly dependent on the pH value due to the unique property of PAA. The HeLa cell-uptake process of DOX-loaded PAA@Fe(3)O(4) was observed by confocal laser scanning microscopy (CLSM). After being incubated with HeLa cells under magnet magnetically guided conditions, the cytotoxtic effects of DOX-loaded PAA@Fe(3)O(4) increased. These results indicate that pH-responsive magnetic PAA@Fe(3)O(4) spheres have the potential to be used as anticancer drug carriers.

Fe3O4 nanobelts: one-pot and template-free synthesis, magnetic property, and application for lithium storage

We report on the synthesis of Fe(3)O(4) nanobelts with good magnetic properties and lithium storage performances by using a one-pot and template-free hydrothermal method with Na(2)CO(3) and FeCl(2) as the reactants. By controlling the amount of Na(2)CO(3), we obtained pure Fe(3)O(4) nanobelts with widths of 0.1-2 μm, thicknesses of about 10 nm and lengths of 20-30 μm, showing a high aspect ratio. XRD and SAED patterns of the obtained sample demonstrated that the Fe(3)O(4) nanobelts were well crystallized. Nitrogen adsorption/desorption measurements showed that Fe(3)O(4) nanobelts manifested a BET surface area of 25.04 m(2) g(-1). Further experiments demonstrated that the amount of Na(2)CO(3) played an important role in controlling both the morphologies and crystal structures of the products. The formation mechanism of Fe(3)O(4) nanobelts was also studied. More importantly, we found that the Fe(3)O(4) nanobelts showed magnetic properties with a magnetic saturation value of 77.0 emu g(-1) and lithium storage performances with a high initial discharge capacity of 1090 mAh g(-1) at a current rate of 500 mA g(-1), and a reversible capacity of 404 mAh g(-1) retained after 60 charge/discharge cycles. These results suggest that the Fe(3)O(4) nanobelts might be promising for magnetic and lithium battery applications.

Superparamagnetic Ag@Fe3O4 core-shell nanospheres: fabrication, characterization and application as reusable nanocatalysts

Superparamagnetic Ag@Fe(3)O(4) nanospheres with core-shell nanostructures have been prepared by a facile one-pot method. The diameter of the as-synthesized nanospheres was about 200 nm and the core sizes were between 50 and 100 nm. By varying the concentrations, particles with tunable core size and total size are successfully achieved. Time dependent experiments were constructed to investigate the synthesis mechanism, which indicated that the present method corresponded to an Ostwald ripening progress. The BET area of the core-shell nanospheres is about 22.6 m(2)/g and this result indicates that the product shows a porous character. The saturated magnetization of the superparamagnetic Ag@Fe(3)O(4) nanospheres is 27.4 emu g(-1) at room temperature, which enables them to be recycled from the solution by simply applying a small magnet. Due to the unique nanostructure, these particles show high performance in catalytic reduction of 4-nitrophenol and can be used as reusable nanocatalysts.

Highly porous, water-soluble, superparamagnetic, and biocompatible magnetite nanocrystal clusters for targeted drug delivery

Magnetic particles have become very promising materials for drug delivery. However, preparation of magnetite particles with high surface area, biocompatibility, strong magnetic response, and suitable particle size still remains a major challenge. In this report, magnetite nanocrystal clusters with high surface areas were fabricated through a solvothermal process by introducing ammonium acetate as a porogen and trisodium citrate as a surface modification agent. The porosity, which was controlled by the reactant concentration, has been investigated in detail. The surface area of the nanocrystal clusters was as high as 141 m(2) g(-1). Ibuprofen, as a model drug, was entrapped into the magnetite carriers. The interfacial interaction between the carboxylic groups on the drug molecules and the carboxylate groups on the carriers enhanced the loading efficiency. Low cytotoxicity in MCF-7 cell and in vitro constant drug release behavior combined with the high drug loading efficiency and high saturation magnetization values demonstrated the potential of the as-synthesized magnetite materials in targeted drug release systems.

Synthesis of biocompatible, mesoporous Fe(3)O(4) nano/microspheres with large surface area for magnetic resonance imaging and therapeutic applications

This article reports the fabrication of mesoporous Fe(3)O(4) nano/microspheres with a high surface area value (163 m(2)/g, Brunauer-Emmett-Teller) and demonstrates their use for drug loading, release, and magnetic resonance imaging (MRI). These monodispersed, mesoporous Fe(3)O(4) nano/microspheres with controllable average sizes ranging from 50 to 200 nm were synthesized using a Fe(3)O(4)/poly(acrylic acid) hybrid sphere template and subsequent silica shell formation and removal. We found that the SiO(2) coating is a crucial step for the successful synthesis of uniform mesoporous Fe(3)O(4) nano/microspheres. The as-synthesized mesoporous Fe(3)O(4) nanospheres show a high magnetic saturation value (M(s) = 48.6 emu/g) and could be used as MRI contrast agents (r(2) = 36.3 s(-1) mM(-1)). Trypan blue exclusion and MTT assay (see Supporting Information ) cytotoxicity analyses of the nanospheres based on HepG2 and MDCK cells showed that the products were biocompatible, with a lower toxicity than lipofectamine (positive control). Hydrophilic ibuprofen and hydrophobic zinc(II) phthalocyanine drug loading into mesoporous Fe(3)O(4) nanospheres and selected release experiments were successfully achieved. The potential use of mesoporous Fe(3)O(4) nanospheres in biomedical applications, in light of the nano/microspheres' efficient drug loading and release, MRI, and low cytotoxicity, has been demonstrated. It is envisaged that mesoporous Fe(3)O(4) nanospheres can be used as drug carriers and MRI contrast agents for the reticuloendothelial system; they can also be delivered locally, such as via a selective catheter.