Stable supported lipid bilayers on zirconium phosphonate surfaces

Nanoscale structural response of biomimetic cell membranes to controlled dehydration

Although cell membranes exist in excess of water under physiological conditions, there are a number of biochemical processes, such as adsorption of biomacromolecules or membrane fusion events, that require partial or even complete transient dehydration of lipid membranes. Even though the dehydration process is crucial for understanding all fusion events, still little is known about the structural adaptation of lipid membranes when their interfacial hydration layer is perturbed. Here, we present the study of the nanoscale structural reorganization of phase-separated, supported lipid bilayers (SLBs) under a wide range of hydration conditions. Model lipid membranes were characterised using a combination of fluorescence microscopy and atomic force microscopy and, crucially, without applying any chemical or physical modifications that have previously been considered essential for maintaining the membrane integrity upon dehydration. We revealed that decreasing the hydration state of the membrane leads to an enhanced mixing of lipids characteristic of the liquid-disordered (Ld) phase with those forming the liquid-ordered (Lo) phase. This is associated with a 2-fold decrease in the hydrophobic mismatch between the Ld and Lo lipid phases and a 3-fold decrease in the line tension for the fully desiccated membrane. Importantly, the observed changes in the hydrophobic mismatch, line tension, and lipid miscibility are fully reversible upon subsequent rehydration of the membrane. These findings provide a deeper insight into the fundamental processes, such as cell-cell fusion, that require partial dehydration at the interface of two membranes.

Hybrid bilayer membranes as platforms for biomimicry and catalysis

Hybrid bilayer membrane (HBM) platforms represent an emerging nanoscale bio-inspired interface that has broad implications in energy catalysis and smart molecular devices. An HBM contains multiple modular components that include an underlying inorganic surface with a biological layer appended on top. The inorganic interface serves as a support with robust mechanical properties that can also be decorated with functional moieties, sensing units and catalytic active sites. The biological layer contains lipids and membrane-bound entities that facilitate or alter the activity and selectivity of the embedded functional motifs. With their structural complexity and functional flexibility, HBMs have been demonstrated to enhance catalytic turnover frequency and regulate product selectivity of the O₂ and CO₂ reduction reactions, which have applications in fuel cells and electrolysers. HBMs can also steer the mechanistic pathways of proton-coupled electron transfer (PCET) reactions of quinones and metal complexes by tuning electron and proton delivery rates. Beyond energy catalysis, HBMs have been equipped with enzyme mimics and membrane-bound redox agents to recapitulate natural energy transport chains. With channels and carriers incorporated, HBM sensors can quantify transmembrane events. This Review serves to summarize the major accomplishments achieved using HBMs in the past decade.

Nanoarchitectured air-stable supported lipid bilayer incorporating sucrose-bicelle complex system

Cell-membrane-mimicking supported lipid bilayers (SLBs) provide an ultrathin, self-assembled layer that forms on solid supports and can exhibit antifouling, signaling, and transport properties among various possible functions. While recent material innovations have increased the number of practically useful SLB fabrication methods, typical SLB platforms only work in aqueous environments and are prone to fluidity loss and lipid-bilayer collapse upon air exposure, which limits industrial applicability. To address this issue, herein, we developed sucrose-bicelle complex system to fabricate air-stable SLBs that were laterally mobile upon rehydration. SLBs were fabricated from bicelles in the presence of up to 40 wt% sucrose, which was verified by quartz crystal microbalance-dissipation (QCM-D) and fluorescence recovery after photobleaching (FRAP) experiments. The sucrose fraction in the system was an important factor; while 40 wt% sucrose induced lipid aggregation and defects on SLBs after the dehydration-rehydration process, 20 wt% sucrose yielded SLBs that exhibited fully recovered lateral mobility after these processes. Taken together, these findings demonstrate that sucrose-bicelle complex system can facilitate one-step fabrication of air-stable SLBs that can be useful for a wide range of biointerfacial science applications.

Hydration Layer of Only a Few Molecules Controls Lipid Mobility in Biomimetic Membranes

Self-assembly of biomembranes results from the intricate interactions between water and the lipids’ hydrophilic head groups. Therefore, the lipid–water interplay strongly contributes to modulating membrane architecture, lipid diffusion, and chemical activity. Here, we introduce a new method of obtaining dehydrated, phase-separated, supported lipid bilayers (SLBs) solely by controlling the decrease of their environment’s relative humidity. This facilitates the study of the structure and dynamics of SLBs over a wide range of hydration states. We show that the lipid domain structure of phase-separated SLBs is largely insensitive to the presence of the hydration layer. In stark contrast, lipid mobility is drastically affected by dehydration, showing a 6-fold decrease in lateral diffusion. At the same time, the diffusion activation energy increases approximately 2-fold for the dehydrated membrane. The obtained results, correlated with the hydration structure of a lipid molecule, revealed that about six to seven water molecules directly hydrating the phosphocholine moiety play a pivotal role in modulating lipid diffusion. These findings could provide deeper insights into the fundamental reactions where local dehydration occurs, for instance during cell–cell fusion, and help us better understand the survivability of anhydrobiotic organisms. Finally, the strong dependence of lipid mobility on the number of hydrating water molecules opens up an application potential for SLBs as very precise, nanoscale hydration sensors.

Immobilising giant unilamellar vesicles with zirconium metal-organic framework anchors

Lipid bilayer vesicles have provided a window into the function and fundamental properties of cells. However, as is the case for most living and soft matter, vesicles do not remain still. This necessitates some microscopy experiments to include a preparatory immobilisation step. Here, we describe a straightforward method to immobilise giant unilamellar vesicles (GUVs) using zirconium-based metal-organic frameworks (MOFs) and demonstrate that GUVs bound in this way will stay in position on a timescale of minutes to hours.

Bridging exosome and liposome through zirconium–phosphate coordination chemistry: a new method for exosome detection

An exosomes–zirconium–liposomes sandwich structure is proposed to detect exosomes by using zirconium–phosphate coordination chemistry with lower cost, no modified label, and simplicity.

Interactions and Translational Dynamics of Phosphatidylinositol Bisphosphate (PIP2) Lipids in Asymmetric Lipid Bilayers

Phosphatidylinositol phosphate (PIP) lipids are critical to many cell signaling pathways, in part by acting as molecular beacons that recruit peripheral membrane proteins to specific locations within the plasma membrane. Understanding the biophysics of PIP-protein interactions is critical to developing a chemically detailed model of cell communication. Resolving such interactions is challenging, even in model membrane systems, because of the difficulty in preparing PIP-containing membranes with high fluidity and integrity. Here we report on a simple, vesicle-based protocol for preparing asymmetric supported lipid bilayers in which fluorescent PIP lipid analogues are found only on the top leaflet of the supported membrane facing the bulk solution. With this asymmetric distribution of lipids between the leaflets, the fluorescent signal from the PIP lipid analogue reports directly on interactions between the peripheral molecules and the top leaflet of the membrane. Asymmetric PIP-containing bilayers are an ideal platform to investigate the interaction of PIP with peripheral membrane proteins using fluorescence-based imaging approaches. We demonstrate their usefulness here with a combined fluorescence correlation spectroscopy and single particle tracking study of the interaction between PIP2 lipids and a polycationic polymer, quaternized polyvinylpyridine (QPVP). With this approach we are able to quantify the microscopic features of the mobility coupling between PIP2 lipids and polybasic QPVP. With single particle tracking we observe individual PIP2 lipids switch from Brownian to intermittent motion as they become transiently trapped by QPVP.

Using a patterned grating structure to create lipid bilayer platforms insensitive to air bubbles

Supported lipid bilayers (SLBs) have been used for various biosensing applications. The bilayer structure enables embedded lipid membrane species to maintain their native orientation, and the two-dimensional fluidity is crucial for numerous biomolecular interactions to occur. The platform integrated with a microfluidic device for reagent transport and exchange has great potential to be applied with surface analytical tools. However, SLBs can easily be destroyed by air bubbles during assay reagent transport and exchange. Here, we created a patterned obstacle grating structured surface in a microfluidic channel to protect SLBs from being destroyed by air bubbles. Unlike all of the previous approaches using chemical modification or adding protection layers to strengthen lipid bilayers, the uniqueness of this approach is that it uses the patterned obstacles to physically trap water above the bilayers to prevent the air-water interface from directly coming into contact with and peeling the bilayers. We showed that our platform with certain grating geometry criteria can provide promising protection to SLBs from air bubbles. The required obstacle distance was found to decrease when we increased the air-bubble movement speed. In addition, the interaction assay results from streptavidin and biotinylated lipids in the confined SLBs suggested that receptors at the SLBs retained the interaction ability after air-bubble treatment. The results showed that the developed SLB platform can preserve both high membrane fluidity and high accessibility to the outside environment, which have never been simultaneously achieved before. Incorporating the built platforms with some surface analytical tools could open the bottleneck of building highly robust in vitro cell-membrane-related bioassays.

Formation of highly stable self-assembled alkyl phosphonic acid monolayers for the functionalization of titanium surfaces and protein patterning

A protocol for the preparation of improved phosphonate monolayers on a titanium (Ti) substrate is presented. Zirconium ions were used to enhance the bonding between the phosphonate headgroup and the pretreated Ti surface. Contact angle and X-ray photoelectron spectroscopy were used to characterize self-assembled monolayers (SAMs) of alkylphosphonic acid that formed spontaneously on Zr-mediated Ti (Zr/Ti) surfaces. The surfaces that were treated with an aqueous solution of zirconium oxychloride showed significantly enhanced stability in buffer compared with those formed directly on the native oxidized Ti. A bifunctional molecule, 10-mercaptodecanyl phosphonic acid (MDPA), was also used to form SAMs on Zr/Ti surfaces using an identical method, which enabled us to regulate the surface functionality through the terminal functional group. Protein patterning on the surface was carried out using UV irradiation through a mask to selectively degrade regions of the MDPA molecules. The surface was then backfilled with a protein-resistant molecule in the exposed regions followed by selective immobilization of proteins to the unexposed areas using a heterobifunctional linker molecule. The presented strategy significantly improved the stability of the phosphonate SAMs on oxidized Ti surfaces, which provided an ideal approach foundation for biomolecular immobilization and patterning onto the Ti surfaces. Thus, this method provided a versatile platform to activate the surfaces of biomedical Ti implants.

Design and optimization of a phosphopeptide anchor for specific immobilization of a capture protein on zirconium phosphonate modified supports

The attachment of affinity proteins onto zirconium phosphonate coated glass slides was investigated by fusing a short phosphorylated peptide sequence at one extremity to enable selective bonding to the active surface via the formation of zirconium phosphate coordinate covalent bonds. In a model study, the binding of short peptides containing zero to four phosphorylated serine units and a biotin end-group was assessed by surface plasmon resonance-enhanced ellipsometry (SPREE) as well as in a microarray format using fluorescence detection of AlexaFluor 647-labeled streptavidin. Significant binding to the zirconated surface was only observed in the case of the phosphopeptides, with the best performance, as judged by streptavidin capture, observed for peptides with three or four phosphorylation sites and when spotted at pH 3. When fusing similar phosphopeptide tags to the affinity protein, the presence of four phosphate groups in the tag allows efficient immobilization of the proteins and efficient capture of their target.

Tethered bilayer lipid membranes (tBLMs): interest and applications for biological membrane investigations

Biological membranes play a central role in the biology of the cell. They are not only the hydrophobic barrier allowing separation between two water soluble compartments but also a supra-molecular entity that has vital structural functions. Notably, they are involved in many exchange processes between the outside and inside cellular spaces. Accounting for the complexity of cell membranes, reliable models are needed to acquire current knowledge of the molecular processes occurring in membranes. To simplify the investigation of lipid/protein interactions, the use of biomimetic membranes is an approach that allows manipulation of the lipid composition of specific domains and/or the protein composition, and the evaluation of the reciprocal effects. Since the middle of the 80's, lipid bilayer membranes have been constantly developed as models of biological membranes with the ultimate goal to reincorporate membrane proteins for their functional investigation. In this review, after a brief description of the planar lipid bilayers as biomimetic membrane models, we will focus on the construction of the tethered Bilayer Lipid Membranes, the most promising model for efficient membrane protein reconstitution and investigation of molecular processes occurring in cell membranes.

Asymmetric supported lipid bilayer formation via methyl-β-cyclodextrin mediated lipid exchange: influence of asymmetry on lipid dynamics and phase behavior

Supported lipid bilayers (SLBs) are broadly used as minimal membrane models and commonly produced by vesicle fusion (VF) on solid supports. Despite its advantages, VF does not allow the controlled formation of bilayers that mimic the leaflet asymmetry in lipid composition normally found in biological systems. Here we present a simple, quick, and versatile method to produce SLBs with a desired asymmetric lipid composition which is stable for ca. 4 h. We apply methyl-β-cyclodextrin mediated lipid exchange to SLBs formed by VF to enrich the upper leaflet of the bilayer with sphingomyelin. The bilayer asymmetry is assessed by fluorescence correlation spectroscopy, measuring the lipid mobility separately in each leaflet. To check the compatibility of the method with the most common protein reconstitution approaches, we report the production of asymmetric SLBs (aSLBs) in the presence of a glycosylphosphatidylinositol-anchored protein, reconstituted in the bilayer both, via direct protein insertion, and via proteoliposomes fusion. We finally apply aSLBs to study phase separation and transbilayer lipid movement of raft-mimicking lipid mixtures. The observed differences in terms of phase separation in symmetric and asymmetric SLBs with the same overall lipid composition provide further experimental evidence that the transversal lipid distribution affects the overall lipid miscibility and allow to temporally investigate leaflet mixing.

Creating air-stable supported lipid bilayers by physical confinement induced by phospholipase A2

Supported lipid bilayer platforms have been used for various biological applications. However, the lipid bilayers easily delaminate and lose their natural structure after being exposed to an air-water interface. In this study, for the first time, we demonstrated that physical confinement can be used instead of chemical modifications to create air-stable membranes. Physical confinement was generated by the obstacle network induced by a peripheral enzyme, phospholipase A2. The enzyme and reacted lipids could be washed away from the obstacle network, which was detergent-resistant and strongly bonded to the solid support. On the basis of these properties, the obstacle framework on the solid support was reusable and lipid bilayers with the desired composition could be refilled and formed in the region confined by the obstacle framework. The results of fluorescence recovery after photobleaching (FRAP) indicate that the diffusivities of the lipid bilayers before drying and after rehydration were comparable, indicating the air stability of the physically confined membrane. In addition, we observed that the obstacles could trap a thin layer of water after the air-water interface passed through the lipid bilayer. Because the obstacles were demonstrated to be several times higher than a typical lipid membrane on a support, the obstacles may act as container walls, which can trap water above the lipid membrane. The water layer may have prevented the air-water interface from directly contacting the lipid membrane and, therefore, buffered the interfacial force, which could cause membrane delamination. The results suggest the possibility of using physical confinement to create air-stable membranes without changing local membrane rigidity or covering the membrane with protecting molecules.

Control of the morphology of lipid layers by substrate surface chemistry

In this study, surface coatings were used to control the morphology of the deposited lipid layers during vesicle spreading, i.e., to control if liposomes self-assemble on a surface into a supported lipid bilayer or a supported vesicular layer. The influence of the properties of the surface coating on formation of the deposited lipid layer was studied with quartz crystal microbalance and two-wavelength multiparametric surface plasmon resonance techniques. Control of lipid self-assembly on the surface was achieved by two different types of soft substrate materials, i.e., dextran and thiolated polyethylene glycol, functionalized with hydrophobic linkers for capturing the lipid layer. The low-molecular-weight dextran-based surface promoted formation of supported lipid bilayers, while the thiolated polyethylene glycol-based surface promoted supported vesicular layer formation. A silicon dioxide surface was used as a reference surface in both measurement techniques. In addition to promoting supported lipid bilayer formation of known lipid mixtures, the dextran surface also promoted supported lipid bilayer formation of vesicles containing the cell membrane extract of human hepatoblastoma cells. The new dextran-based surface was also capable of protecting the supported lipid bilayer against dehydration when exposed to a constant flow of air. The well-established quartz crystal microbalance technique was effective in determining the morphology of the formed lipid layer, while the two-wavelength surface plasmon resonance analysis enabled further complementary characterization of the adsorbed supported lipid bilayers and supported vesicular layers.

Exploration of interactions between membrane proteins embedded in supported lipid bilayers and their antibodies by reflectometric interference spectroscopy-based sensing

A microfluidic reflectometric interference spectroscopy (RIfS)-based sensor was fabricated to investigate the activity of multidrug resistance-associated protein 1 (MRP1), applied as a model membrane protein.

(89)Zr-labeled paramagnetic octreotide-liposomes for PET-MR imaging of cancer

PURPOSE

Dual-modality PET/MR platforms add a new dimension to patient diagnosis with high resolution, functional, and anatomical imaging. The full potential of this emerging hybrid modality could be realized by using a corresponding dual-modality probe. Here, we report pegylated liposome (LP) formulations, housing a MR T(1) contrast agent (Gd) and the positron-emitting (89)Zr (half-life: 3.27 days), for simultaneous PET and MR tumor imaging capabilities.

METHODS

(89)Zr oxophilicity was unexpectedly found advantageous for direct radiolabeling of preformed paramagnetic LPs. LPs were conjugated with octreotide to selectively target neuroendocrine tumors via human somatostatin receptor subtype 2 (SSTr2). (89)Zr-Gd-LPs and octreotide-conjugated homolog were physically, chemically and biologically characterized.

RESULTS

(89)Zr-LPs showed reasonable stability over serum proteins and chelator challenges for proof-of-concept in vitro and in vivo investigations. Nuclear and paramagnetic tracking quantified superior SSTr2-recognition of octreotide-LP compared to controls.

CONCLUSIONS

This study demonstrated SSTr2-targeting specificity along with direct chelator-free (89)Zr-labeling of LPs and dual PET/MR imaging properties.

Lipid adlayer organization mediated by a liquid overlayer

We report on the formation of a chemically bound 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) monolayer on modified Au and silica surfaces, and changes in the organization of the interfacial lipid layer associated with immersion in aqueous solution. We have studied the interface using steady state and time resolved fluorescence spectroscopy, water contact angle and optical ellipsometry measurements, and electrochemical methods. Our data reveal that the DMPC adlayer in contact with air forms a relatively well organized interface that mediates the rotational motion of perylene. In the presence of an aqueous overlayer, perylene reorientation becomes more rapid, consistent with a reduction in the organization of the interfacial lipid adlayer. One implication of this finding is that the interfacial adlayer is less than a uniform monolayer, which is confirmed by electrochemical data. Our data underscore the importance of water in mediating the organization of interfacial lipid adlayers.

Survey of the 2009 commercial optical biosensor literature

We took a different approach to reviewing the commercial biosensor literature this year by inviting 22 biosensor users to serve as a review committee. They set the criteria for what to expect in a publication and ultimately decided to use a pass/fail system for selecting which papers to include in this year's reference list. Of the 1514 publications in 2009 that reported using commercially available optical biosensor technology, only 20% passed their cutoff. The most common criticism the reviewers had with the literature was that "the biosensor experiments could have been done better." They selected 10 papers to highlight good experimental technique, data presentation, and unique applications of the technology. This communal review process was educational for everyone involved and one we will not soon forget.

Supported lipid bilayers at skeletonized surfaces for the study of transmembrane proteins

Skeletonized zirconium phosphonate surfaces are used to support planar lipid bilayers and are shown to be viable substrates for studying transmembrane proteins. The skeletonized surfaces provide space between the bilayer and the solid support to enable protein insertion and avoid denaturation. The skeletonized zirconium octadecylphosphonate surfaces were prepared using Langmuir-Blodgett techniques by mixing octadecanol with octadecylphosphonic acid. After zirconation of the transferred monolayer, rinsing the coating with organic solvent removes the octadecanol, leaving holes in the film ranging from ∼50 to ∼500 nm in diameter, depending on the octadecanol content. Upon subsequent deposition of a lipid bilayer, either by vesicle fusion or by Langmuir-Blodgett/Langmuir-Schaefer techniques, the lipid assemblies span the holes providing reservoirs beneath the bilayer. The viability of the supported bilayers as model membranes for transmembrane proteins was demonstrated by examining two approaches for incorporating the proteins. The BK channel protein inserts directly into a preformed bilayer on the skeletonized surface, in contrast to a bilayer on a nonskeletonized film, for which the protein associates only weakly. As a second approach, the integrin α(5)β(1) was reconstituted in lipid vesicles, and its inclusion in supported bilayers on the skeletonized surface was achieved by vesicle fusion. The integrin retains its ability to recognize the extracellular matrix protein fibronectin when supported on the skeletonized film, again in contrast to the response if the bilayer is supported on a nonskeletonized film.

Tethered bilayer lipid membranes on mixed self-assembled monolayers of a novel anchoring thiol: impact of the anchoring thiol density on bilayer formation

Tethered bilayer lipid membranes (tBLMs) are designed on mixed self-assembled monolayers (SAMs) of a novel synthetic anchoring thiol, 2,3-di-o-palmitoylglycerol-1-tetraethylene glycol mercaptopropanoic acid ester (TEG-DP), and a new short dilution thiol molecule, tetraethylene glycol mercaptopropanoic acid ester (TEG). tBLM formation was accomplished by self-directed fusion of small unilamellar vesicles of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine. The influence of the dilution of the anchoring thiol molecule in the SAM on the vesicle fusion process and on the properties of the resulting tBLMs is studied. It is observed by quartz crystal microbalance that vesicle fusion is a one-step process for a pure TEG-DP SAM as well as for mixed SAMs containing a high concentration of the anchoring thiol. However, upon dilution of the anchoring thiol to moderate concentrations, this process is decelerated and possibly follows a pathway different from that observed on a pure TEG-DP SAM. Electrochemical impedance spectroscopy is used to qualitatively correlate the composition of the SAM to the electrical properties of the tBLM. In this paper we also delineate the necessity of a critical concentration of this anchoring TEG-DP thiol as a requisite for inducing the fusion of vesicles to form a tBLM.

Chemical-vapor-deposition-based polymer substrates for spatially resolved analysis of protein binding by imaging ellipsometry

Biomolecular interactions between proteins and synthetic surfaces impact diverse biomedical fields. Simple, quantitative, label-free technologies for the analysis of protein adsorption and binding of biomolecules are thus needed. Here, we report the use of a novel type of substrate, poly-p-xylylene coatings prepared by chemical vapor deposition (CVD) polymerization, for surface plasmon resonance enhanced ellipsometry (SPREE) studies and assess the reactive coatings as spatially resolved biomolecular sensing arrays. Prior to use in binding studies, reactive coatings were fully characterized by Fourier transform infrared spectroscopy, electrochemical impedance spectroscopy, and ellipsometry. As a result, the chemical structure, thickness, and homogeneous coverage of the substrate surface were confirmed for a series of CVD-coated samples. Subsequent SPREE imaging and fluorescence microscopy indicated that the synthetic substrates supported detectable binding of a cascade of biomolecules. Moreover, analysis revealed a useful thickness range for CVD films in the assessment of protein and/or antigen-antibody binding via SPREE imaging. With a variety of functionalized end groups available for biomolecule immobilization and ease of patterning, CVD thin films are useful substrates for spatially resolved, quantitative binding arrays.

Constituent-dependent liposome structure and organization

We have used steady state and time-resolved fluorescence spectroscopy in concert with TEM to study organization and dynamics of molecules comprising liposomes, discoidal micelles, and spherical micelles. The lipid aggregates contained controlled amounts of lipids with headgroups modified with a thiol-terminated polyethylene glycol (thio-PEG lipids) and a small amount of 1-palmitoyl-2-(pyrene-1-yl)decanoyl-sn-glycero-3-phosphocholine (pyrene tethered DPPC), pyrene, or perylene as spectroscopic probes. The maximum diameter of the lipid aggregates was controlled by the polycarbonate filter pore size used in the extrusion process. The concentration of thio-PEG lipid in the aggregates determines not only the shape of the lipid assemblies but also the organization of the molecules within the assembly. Fluorescence lifetime and anisotropy decay data show that the immediate environment of pyrene tethered DPPC changes with the addition of thio-PEG lipid. In contrast, the dynamics of free chromophore (perylene) are insensitive to the addition of thio-PEG lipid. The addition of thio-PEG lipid to the lipid assembly produces changes in organization that are most pronounced in the lipid headgroup region. Reorientation dynamics of perylene show that the organization of the lipid bilayer acyl chain region is affected little by the addition of thio-PEG lipid and consequent macroscopic changes in the morphology of the lipid assemblies.