Synthesis of silver nanoparticles coated with OH-functionalized organic groups: dispersion and covalent bonding in epoxy networks

Multiplexing surface anchored functionalized iron carbide nanoparticle: A low molecular weight proteome responsive nano-tracer

Harvesting the low molecular weight (LMW) proteins from the cellular exudates is a big challenge for early disease detection. Here, we introduce a unique probe composed of surface-functionalized Fe₂C NPs with different functional groups to harvest, identify and profile differentially expressed biomarker proteins. Three different functionalization of Fe₂C NPs with Fe₂C@NH_2, Fe₂C@COOH and Fe₂C@PEG enabled to harvest 119 differentially expressed proteins from HeLa cell exudates. Among these proteins, 57 were LMW which 82.46 % were up-regulated and 17.54 % were down-regulated. The Fe₂C@NH₂ were able to separate 60S ribosomal proteins L7a, and L11, and leucine-rich repeat-containing protein 59. These proteins play a vital role in the maturation of large subunit ribosomal ribonucleic acid, mRNA splicing via spliceosome and cancer cell inhibitor, respectively. While, Fe₂C@COOH identifies the 60S ribosomal protein types L7, 40S ribosomal protein S11, and 60S ribosomal protein L24. These proteins were important for large ribosomal subunit biogenesis, translational initiation, and assembly of large subunit precursor of pre-ribosome. Finally, the Fe₂C@PEG extracted 40S ribosomal protein S2, splicing factor, arginine/serine-rich and 40S ribosomal protein S4, X isoform which were responsible for nonsense-mediated decay, oligodendrocyte differentiation and multicellular organism development. Thus, these results help us in defining oncogenic biomarkers for early disease detection.

Tuning the Photothermal Effect of Carboxylated-Coated Silver Nanoparticles through pH-Induced Reversible Aggregation

The photothermal response of mercaptoundecanoic acid (MUA)-coated Ag nanoparticles (Ag@MUA NPs) in both aqueous dispersions and paper substrates was determined as a function of pH when irradiated with a green laser or a blue LED source. Aqueous dispersions of Ag@MUA NPs showed an aggregation behavior by acidification that was used for the formation of NPs clusters of variable sizes. Aggregation was induced by changing the pH across the apparent pK_a of the acid, higher than the pK_a of the free acid. Formation of these aggregates was completely reversible allowing the return to the well-dispersed initial state by simply increasing the pH by the addition of a base. Aggregation produced a shift of the plasmon band that changed the spectra of the dispersions and their ability to be remotely heated when irradiated with visible light. These aggregates could be transferred to paper by simple impregnation of the substrates with the dispersion. On the solid substrate, a higher photothermal response than in the liquid medium was observed. A high local increase of up to 75 °C could be recorded on paper after only 30 s of irradiation with a green laser, whereas a blue LED array was enough for inducing the melting of a solid paraffin (T_m = 36-38 °C) deposited on it. This work demonstrates that photothermal heating can be controlled by the reversible aggregation of NPs to induce different thermal responses in liquid and solid media.

Effect of Light Intensity on the Aggregation Behavior of Primary Particles during In Situ Photochemical Synthesis of Gold/Polymer Nanocomposites

Metal/polymer nanocomposites have attracted much attention in recent years due to their exceptional properties and wide range of potential applications. A key challenge to obtain these materials is to stabilize the metal nanoparticles in the matrix, avoiding uncontrolled aggregation processes driven by the high surface free energy of nanosized particles. Here, we investigate the aggregation mechanism of primary particles in gold-epoxy nanocomposites prepared via light-assisted in situ synthesis, under different irradiation conditions. The growth and aggregation of gold nanoparticles were monitored in situ by time-resolved small-angle X-ray scattering experiments, whereas spectroscopic measurements were performed to interpret how matrix polymerization influences the aggregation process. It was found that light intensity has a greater influence on the reduction rate than on the polymerization rate. Under irradiation, gold nanostructures evolve through five time-defined stages: nuclei-mass fractals-surface fractals-spherical nanoparticles-aggregates. If the maximum in the polymerization rate is reached before the aggregation step, individual primary nanoparticles will be preserved in the polymer matrix due to diffusional constraints imposed by the reaction medium. Because the light intensity has a different influence on the reduction rate than on the polymerization rate, this parameter can be used as a versatile tool to avoid aggregation of gold nanoparticles into the polymer matrix.

Silver nanoparticles coated with dodecanethiol used as fillers in non-cytotoxic and antifungal PBAT surface based on nanocomposites

In the present study, we report the preparation of antifungal and non-cytotoxic polymer nanocomposites with potential application in biomedical materials. Dodecanethiol-protected silver nanoparticles (AgNPs-DDT) were synthesized by a reduction/precipitation method and dispersed in chloroform to obtain stable colloidal dispersions. PBAT-based nanocomposites containing 0.25, 0.5 and 2 wt% AgNPs-DDT were prepared by casting method. The incorporation of AgNPs-DDT in PBAT matrix resulted in nanocomposites which combine improved mechanical performance and antifungal properties with a non-cytotoxic characteristic.

In situ curing of liquid epoxy via gold-nanoparticle mediated photothermal heating

Metal nanoparticles incorporated at low concentration into epoxy systems enable in situ curing via photothermal heating. In the process of nanoparticle-mediated photothermal heating, light interacts specifically with particles embedded within a liquid or solid material and this energy is transformed into heat, resulting in significant temperature increase local to each particle with minimal warming of surroundings. The ability to use such internal heating to transform the mechanical properties of a material (e.g., from liquid to rigid solid) without application of damaging heat to the surrounding environment represents a powerful tool for a variety of scientific applications, particularly within the biomedical sector. Uniform particle dispersion is achieved by placing the nanoparticles within solvent miscible with the desired epoxy resin, demonstrating a strategy utilizable for a wide range of materials without requiring chemical modification of the particles or epoxy. Mechanical and thermal properties (storage modulus, T _g, and degradation behavior) of the cured epoxy are equivalent to those obtained under traditional heating methods. Selective curing of a shape is demonstrated within a liquid bath of epoxy, where the solid form is generated by rastering a spatially confined, photothermal-driving light beam. The non-irradiated regions are largely unaffected and the solid part is easily removed from the remaining liquid. Temperature profiles showing minimal heating outside the irradiated zone are presented and discussed.

Alcohol-Selective Oxidation in Water under Mild Conditions via a Novel Approach to Hybrid Composite Photocatalysts

The oxidation of alcohols to carbonyl compounds in a clean fashion (i.e., with water as a solvent or under solvent‐free conditions, and using O₂ or H₂O₂ as the primary oxidant) is the subject of considerable research efforts. A new approach for the selective oxidation of soluble aromatic alcohols in water under mild conditions via a novel composite photocatalyst has been developed. The catalyst is synthesized by grafting 4‐(4‐(4‐hydroxyphenylimino)cyclohexa‐2,5dienylideneamino)phenol and silver nanoparticles onto the surface of moderately crystalline titanium dioxide. The titanium dioxide‐based composite was first extensively characterized and then employed in the catalytic oxidation of 4‐methoxybenzyl alcohol to 4‐methoxybenzaldehyde under UV irradiation in water at room temperature. The corresponding aldehyde was obtained with unprecedented high selectivity (up to 86 %). The method is general and opens the route to fabrication of photocatalytic composites based on titanium dioxide functionalized with shuttle organic molecules and metal nanoparticles for a variety of oxidative conversions.

Reprint of: self-assembly of nanoparticles employing polymerization-induced phase separation

Nanoparticles (NPs) may be homogeneously dispersed in the precursors of a polymer (reactive solvent) by an adequate selection of their stabilizing ligands. However, the dispersion can become metastable or unstable in the course of polymerization. If this happens, NP-rich domains can be segregated by a process called polymerization-induced phase separation (PIPS). This occurs mainly due to the decrease in the entropic contribution of the reactive solvent to the free energy of mixing (increase in its average size) and, for a reactive solvent generating a cross-linked polymer, the additional contribution of the elastic energy in the post-gel stage. The extent of PIPS will depend on the competition between phase separation and polymerization rates. It can be completely avoided, limited to a local scale or conveyed to generate different types of NPs' aggregates such as crystalline platelets, self-assembled structures with a hierarchical order and partitioning at the interface, and bidimensional patterns of NPs at the film surface. The use of a third component in the initial formulation such as a linear polymer or a block copolymer, provides the possibility of generating an internal template for the preferential location and self-assembly of phase-separated NPs. Some illustrative examples of morphologies generated by PIPS in solutions of NPs in reactive solvents, are analyzed in this feature article.