Biocompatible and biodegradable poly(trimethylene carbonate)-b-poly(L-glutamic acid) polymersomes: size control and stability

Design and Evaluation of Nanoscale Materials with Programmed Responsivity towards Epigenetic Enzymes

Self-assembled materials capable of modulating their assembly properties in response to specific enzymes play a pivotal role in advancing 'intelligent' encapsulation platforms for biotechnological applications. Here, we introduce a previously unreported class of synthetic nanomaterials that programmatically interact with histone deacetylase (HDAC) as the triggering stimulus for disassembly. These nanomaterials consist of co-polypeptides comprising poly (acetyl L-lysine) and poly(ethylene glycol) blocks. Under neutral pH conditions, they self-assemble into particles. However, their stability is compromised upon exposure to HDACs, depending on enzyme concentration and exposure time. Our investigation, utilizing HDAC8 as the model enzyme, revealed that the primary mechanism behind disassembly involves a decrease in amphiphilicity within the block copolymer due to the deacetylation of lysine residues within the particles' hydrophobic domains. To elucidate the response mechanism, we encapsulated a fluorescent dye within these nanoparticles. Upon incubation with HDAC, the nanoparticle structure collapsed, leading to controlled release of the dye over time. Notably, this release was not triggered by denatured HDAC8, other proteolytic enzymes like trypsin, or the co-presence of HDAC8 and its inhibitor. We further demonstrated the biocompatibility and cellular effects of these materials and conducted a comprehensive computational study to unveil the possible interaction mechanism between enzymes and particles. By drawing parallels to the mechanism of naturally occurring histone proteins, this research represents a pioneering step toward developing functional materials capable of harnessing the activity of epigenetic enzymes such as HDACs.

Protein-Rich Rafts in Hybrid Polymer/Lipid Giant Unilamellar Vesicles

Considerable attention has been dedicated to lipid rafts due to their importance in numerous cell functions such as membrane trafficking, polarization, and signaling. Next to studies in living cells, artificial micrometer-sized vesicles with a minimal set of components are established as a major tool to understand the phase separation dynamics and their intimate interplay with membrane proteins. In parallel, mixtures of phospholipids and certain amphiphilic polymers simultaneously offer an interface for proteins and mimic this segregation behavior, presenting a tangible synthetic alternative for fundamental studies and bottom-up design of cellular mimics. However, the simultaneous insertion of complex and sensitive membrane proteins is experimentally challenging and thus far has been largely limited to natural lipids. Here, we present the co-reconstitution of the proton pump bo3 oxidase and the proton consumer ATP synthase in hybrid polymer/lipid giant unilamellar vesicles (GUVs) via fusion/electroformation. Variations of the current method allow for tailored reconstitution protocols and control of the vesicle size. In particular, mixing of protein-free and protein-functionalized nanosized vesicles in the electroformation film results in larger GUVs, while separate reconstitution of the respiratory enzymes enables higher ATP synthesis rates. Furthermore, protein labeling provides a synthetic mechanism for phase separation and protein sequestration, mimicking lipid- and protein-mediated domain formation in nature. The latter means opens further possibilities for re-enacting phenomena like supercomplex assembly or symmetry breaking and enriches the toolbox of bottom-up synthetic biology.

Controlling Polymersome Size through Microfluidic-Assisted Self-Assembly: Enabling 'Ready to Use' formulations for biological applications

The self-assembly of poly(ethylene glycol)-block-poly(trimethylene carbonate) PEG-b-PTMC copolymers into vesicles, also referred as polymersomes, was evaluated by solvent displacement using microfluidic systems. Two microfluidic chips with different flow regimes (micromixer and Herringbone) were used and the impact of process conditions on vesicle formation was evaluated. As polymersomes are sensitive to osmotic variations, their preparation under conditions allowing their direct use in biological medium is of major importance. We therefore developed a solvent exchange approach from DMSO (Dimethylsulfoxide) to aqueous media with an osmolarity of 300 mOsm.L^-1, allowing their direct use for biological evaluation. We evidenced that the organic/aqueous solvent ratio does not impact vesicle size, but the total flow rate and copolymer concentration have been observed to influence the size of polymersomes. Finally, nanoparticles with diameters ranging from 76 nm to 224 nm were confirmed to be vesicles through the use of multi-angle light scattering in combination with cryo-TEM (Cryo-Transmission Electron Microscopy) characterization.

Polymersome-based protein drug delivery - quo vadis?

Protein-based therapeutics are an attractive alternative to established therapeutic approaches and represent one of the fastest growing families of drugs. While many of these proteins can be delivered using established formulations, the intrinsic sensitivity of proteins to denaturation sometimes calls for a protective carrier to allow administration. Historically, lipid-based self-assembled structures, notably liposomes, have performed this function. After the discovery of polymersome-based targeted drug-delivery systems, which offer manifold advantages over lipid-based structures, the scientific community expected that such systems would take the therapeutic world by storm. However, no polymersome formulations have been commercialised. In this review article, we discuss key obstacles for the sluggish translation of polymersome-based protein nanocarriers into approved pharmaceuticals, which include limitations imparted by the use of non-degradable polymers, the intricacies of polymersome production methods, and the complexity of the in vivo journey of polymersomes across various biological barriers. Considering this complex subject from a polymer chemist's point of view, we highlight key areas that are worthy to explore in order to advance polymersomes to a level at which clinical trials become worthwhile and translation into pharmaceutical and nanomedical applications is realistic.

Current understandings and clinical translation of nanomedicines for breast cancer therapy

Breast cancer is one of the most frequently diagnosed cancers that is threatening women's life. Current clinical treatment regimens for breast cancer often involve neoadjuvant and adjuvant systemic therapies, which somewhat are associated with unfavorable features. Also, the heterogeneous nature of breast cancers requires precision medicine that cannot be fulfilled by a single type of systemically administered drug. Taking advantage of the nanocarriers, nanomedicines emerge as promising therapeutic agents for breast cancer that could resolve the defects of drugs and achieve precise drug delivery to almost all sites of primary and metastatic breast tumors (e.g. tumor vasculature, tumor stroma components, breast cancer cells, and some immune cells). Seven nanomedicines as represented by Doxil® have been approved for breast cancer clinical treatment so far. More nanomedicines including both non-targeting and active targeting nanomedicines are being evaluated in the clinical trials. However, we have to realize that the translation of nanomedicines, particularly the active targeting nanomedicines is not as successful as people have expected. This review provides a comprehensive landscape of the nanomedicines for breast cancer treatment, from laboratory investigations to clinical applications. We also highlight the key advances in the understanding of the biological fate and the targeting strategies of breast cancer nanomedicine and the implications to clinical translation.

Promising Applications of Nanotechnology in Cancer Diagnostics and Therapeutics

Cancer is characterized by the accumulation of genetic mutations in cells by different types of mutagens such as physical, chemical, and biological. Consequently, normal cell cycles get interrupted. Conventional techniques used for diagnosis include. Various conventional techniques used for cancer diagnosis include immunological assays, histopathogical tests, polymerase chain reaction, computed tomography, magnetic resonance, radiation therapy, and many more. These techniques are expensive, time consuming, tedious, adverse effects to healthy cells and requirement of skilled personnel for their operation. Therefore nanomaterials based biosensors have been used for the sensitive, selective, economic and quick detection of cancer biomarkers. Electrochemical biosensors have shown profound impact in efficient diagnosis of cancers that facilitate the effective treatment of patient in acute stage. Nanomaterials including inorganic, organic and polymeric nanomaterials have been used in the treatment of different types of cancers. Nanoapproaches have offered several merits including site-specific, require traces amount of therapeutic molecules, limited toxicity, avoid drug resistance, more efficient, sensitive and reliable than conventional chemotherapeutics and radiation therapies. Therefore, future research should be focussed on development of highly inventive nanotools for the diagnosis and therapeutics of cancers.

Multi-enzyme co-immobilized nano-assemblies: Bringing enzymes together for expanding bio-catalysis scope to meet biotechnological challenges

Co-immobilization of multi-enzymes has emerged as a promising concept to design and signify bio-catalysis engineering. Undoubtedly, the existence and importance of basic immobilization methods such as encapsulation, covalent binding, cross-linking, or even simple adsorption cannot be ignored as they are the core of advanced co-immobilization strategies. Different strategies have been developed and deployed to green the twenty-first century bio-catalysis. Moreover, co-immobilization of multi-enzymes has successfully resolved the limitations of individual enzyme loaded constructs. With an added value of this advanced bio-catalysis engineering platform, designing, and fabricating co-immobilized enzymes loaded nanostructure carriers to perform a particular set of reactions with high catalytic turnover is of supreme interest. Herein, we spotlight the emergence of co-immobilization strategies by bringing multi-enzymes together with various types of nanocarriers to expand the bio-catalysis scope. Following a brief introduction, the first part of the review focuses on multienzyme co-immobilization strategies, i.e., random co-immobilization, compartmentalization, and positional co-immobilization. The second part comprehensively covers four major categories of nanocarriers, i.e., carbon based nanocarriers, polymer based nanocarriers, silica-based nanocarriers, and metal-based nanocarriers along with their particular examples. In each section, several critical factors that can affect the performance and successful deployment of co-immobilization of enzymes are given in this work.

Overcoming Biological Barriers With Block Copolymers-Based Self-Assembled Nanocarriers. Recent Advances in Delivery of Anticancer Therapeutics

Cancer is one of the most common life-threatening illness and it is the world's second largest cause of death. Chemotherapeutic anticancer drugs have many disadvantages, which led to the need to develop novel strategies to overcome these shortcomings. Moreover, tumors are heterogenous in nature and there are various biological barriers that assist in treatment reisistance. In this sense, nanotechnology has provided new strategies for delivery of anticancer therapeutics. Recently, delivery platforms for overcoming biological barriers raised by tumor cells and tumor-bearing hosts have been reported. Among them, amphiphilic block copolymers (ABC)-based self-assembled nanocarriers have attracted researchers worldwide owing to their unique properties. In this work, we addressed different biological barriers for effective cancer treatment along with several strategies to overcome them by using ABC-based self-assembled nanostructures, with special emphasis in those that have the ability to act as responsive nanocarriers to internal or external environmental clues to trigger release of the payload. These nanocarriers have shown promising properties to revolutionize cancer treatment and diagnosis, but there are still challenges for their successful translation to clinical applications.

Embedding of superparamagnetic iron oxide nanoparticles into membranes of well-defined poly(ethylene oxide)-block-poly(ε-caprolactone) nanoscale magnetovesicles as ultrasensitive MRI probes of membrane bio-degradation

The present study reports the preparation of poly(ethylene oxide)-block-poly(ε-caprolactone) (PEO-b-PCL) polymer vesicles via a nanoprecipitation method and the loading of two different size hydrophobically coated ultrasmall superparamagnetic iron oxide (USPIO) nanoparticles (a magnetic core size of 4.2 nm and 7.6 nm) into the membrane of these nanovesicles, whose thickness was measured precisely by small angle neutron scattering (SANS). Spherical nano-assemblies with a high USPIO payload and a diameter close to 150 nm were obtained as confirmed by dynamic light scattering (DLS), transmission electron microscopy (TEM) and cryo-TEM. The vesicular structure of these hybrid nano-assemblies was confirmed by multi-angle light scattering (MALS) measurements. Their magnetic properties were evaluated by T1 and T2 measurements (20 and 60 MHz) and by nuclear magnetic relaxation dispersion (NMRD) profiles. The size of USPIO entrapped in the membranes of PEO-b-PCL vesicles has a strong impact on their magnetic properties. It affects both their longitudinal and their transverse relaxivities and thus their magnetic resonance imaging (MRI) sensitivity. Acid-catalyzed hydrolysis of the PCL membrane also influences their relaxivities as shown by measurements carried out at pH 7 vs. pH 5. This property was used to monitor the membrane hydrolytic degradation in vitro, as a proof of concept of potential monitoring of drug delivery by nanomedicines in vivo and non-invasively, by MRI.

Thermoresponsive Polysaccharide Graft Polymer Vesicles with Tunable Size and Structural Memory

Controlling polymer vesicle size is difficult and a major obstacle for their potential use in biomedical applications, such as drug-delivery carriers and nanoreactors. Herein, we report size-tunable polymer vesicles based on self-assembly of a thermoresponsive amphiphilic graft copolymer. Unilamellar polymer vesicles form upon heating chilled polymer solutions, and vesicle size can be tuned in the range of 40-70 nm by adjusting the initial polymer concentration. Notably, the polymer can reversibly switch between a monomer state and a vesicle state in accordance with a cooling/heating cycle, which changes neither the size nor the size distribution of the vesicles. This lack of change suggests that the polymer memorizes a particular vesicle conformation. Given our vesicles' size tunability and structural memory, our research considerably expands the fundamental and practical scope of thermoresponsive amphiphilic graft copolymers and renders amphiphilic graft copolymers useful tools for synthesizing functional self-assembled materials.

Organocatalytic Ring-Opening Polymerization of N-Acylated-1,4-oxazepan-7-ones Toward Well-Defined Poly(ester amide)s: Biodegradable Alternatives to Poly(2-oxazoline)s

We report a series of poly(ester amide)s (PEAs) synthesized by organocatalytic ring-opening polymerization (ROP) of N-acylated-1,4-oxazepan-7-one (OxP) monomers, produced from N-acylated-4-piperidones using the Baeyer-Villiger oxidation reaction. The ROP of OxPs, conducted in CH₂Cl₂ at room temperature with benzyl alcohol as initiator and TBD/TU (1,5,7-triazabicyclo[4.4.0]dec-5-ene/thiourea) as a binary organocatalytic system, revealed a controlled/living character. The thermodynamics of the ROP highly depends on the N-acylated substituent of monomers, with the following reactivity order: OxP_Ph > OxP_Me > OxP_Pr > OxP_Bn. Based on NMR results, it seems that our system follows the hydrogen bonding bifunctional activation mechanism. All intermediates and final products were characterized by NMR, MALDI-TOF MS, SEC, and DSC techniques. All poly(N-acylated-1,4-oxazepan-7-one) (POxP) polymers are amorphous with different glass transition temperatures (T_g), depending on the N-acylated substituent (T_g: -2.90 to 43.75 °C). Among the synthesized polymers, only POxP_Me was water-soluble and it degraded much faster than polycaprolactone in an aqueous phosphate buffer saline solution (pH = 7.4). Therefore, poly(N-acylated-1,4-oxazepan-7-one)s are potential biodegradable alternatives to poly(2-oxazoline)s.

Oxidative instability of boronic acid-installed polycarbonate nanoparticles

Oxidative stress, caused by the overproduction of reactive oxygen species (ROS), is often observed in degenerative and/or metabolic diseases, tumors, and inflamed tissues. Boronic acids are emerging as a unique class of responsive biomaterials targeting ROS because of their reactivity toward H2O2. Herein, we examine the oxidative reactivity of nanoparticles from a boronic acid-installed polycarbonate. The extent of oxidation under different concentrations of H2O2 was tracked by the change in fluorescence intensity of an encapsulated solvatochromic reporter dye, demonstrating their sensitivity to biologically-relevant concentrations of hydrogen peroxide. Oxidation-triggered particle destabilization, however, was shown to be highly dependent on the concentration of the final oxidized polymer product, and was only achieved if it fell below polymer critical micelle concentration. Our results indicate that these nanocarriers serve as an excellent dual pH/H2O2 responsive vehicle for drug delivery.

Self-Assembly of PEG-b-PTMC Copolymers: Micelles and Polymersomes Size Control

Poly(ethylene glycol)₄₅-b-poly(trimethylene carbonate)_n PEG₄₅-b-PTMC_n diblock copolymers were synthesized with five different PTMC degrees of polymerization (n = 38, 96, 144, 170, 332) and their self-assembly properties in water were studied using a manual nanoprecipitation procedure. We confirmed that the copolymer's hydrophilic weight fraction (f_PEG) is controlling nanoparticles morphology. We determined that the PEG₄₅-b-PTMC₉₆ with f_PEG ≈ 17% is the optimal hydrophilic fraction for the stabilization of well-defined unilamellar vesicles with a membrane thickness of δ ≈ 14.6 nm. Maintaining this fraction constant and modulating the overall molar mass of the block copolymers allowed the establishment of a power law of [Formula: see text] which provides a robust correlation between the molar mass of PTMC and vesicles' membrane thickness. Finally, we proved that controlling nanoprecipitation's conditions by microfluidics allowed fine-tuning and control of the nanoparticles size and polydispersity index while maintaining their shape with a perfect batch-to-batch reproducibility.

Microfluidic-Assisted Engineering of Quasi-Monodisperse pH-Responsive Polymersomes toward Advanced Platforms for the Intracellular Delivery of Hydrophilic Therapeutics

The extracellular and subcellular compartments are characterized by specific pH levels that can be modified by pathophysiological states. This scenario encourages the use of environmentally responsive nanomedicines for the treatment of damaged cells. We have engineered doxorubicin (DOX)-loaded pH-responsive polymersomes using poly([ N-(2-hydroxypropyl)]methacrylamide)- b-poly[2-(diisopropylamino)ethyl methacrylate] block copolymers (PHPMA _m- b-PDPA _n). We demonstrate that, by taking advantage of the microfluidic technology, quasi-monodisperse assemblies can be created. This feature is of due relevance because highly uniform nanoparticles commonly exhibit more consistent biodistribution and cellular uptake. We also report that the size of the polymer vesicles can be tuned by playing with the inherent mechanical parameters of the microfluidic protocol. This new knowledge can be used to engineer size-specific nanomedicines for enhanced tumor accumulation if the manufacturing is performed with previous knowledge of tumor characteristics (particularly the degree of vascularity and porosity). The pH-dependent DOX release was further investigated evidencing the ability of polymersome to sustain encapsulated hydrophilic molecules when circulating in physiological environment (pH 7.4). This suggests nonrelevant drug leakage during systemic circulation. On the other hand, polymersome disassembly in slightly acid environments takes place enabling fast DOX release, thereby making the colloidal carriers highly cytotoxic. These features encourage the use of such advanced pH-responsive platforms to target damaged cells while preserving healthy environments during systemic circulation.

Dual Responsive Polymersomes for Gold Nanorod and Doxorubicin Encapsulation: Nanomaterials with Potential Use as Smart Drug Delivery Systems

In the present study, poly(ethylene glycol)-b-poly(N,N-diethylaminoethyl methacrylate) (PEG-b-PDEAEM) amphiphilic block copolymers were synthetized by reversible addition-fragmentation chain transfer (RAFT) polymerization using two different macro chain transfer agents containing PEG of 2000 and 5000 g/mol and varying the length of the PDEAEM segment. From the obtained block copolymers, polymersome type nanometric aggregates were obtained by two different techniques. By direct dispersion, particle diameters around 200 nm were obtained, while by solvent exchange using THF and water, the obtained diameters were around 100 nm. These block copolymers were used to encapsulate gold nanorods and doxorubicin (DOX) with good efficiencies to obtain nanomaterials with potential use as dual stimuli-sensitive drug delivery systems for combined anticancer therapies. Drug delivery studies showed that the release rate of DOX was accelerated when the pH was lowered from 7.4 to 5.8 and also when the systems were irradiated with a NIR laser at pH 7.4. The combination of lower pH and near infrared (NIR) irradiation resulted in higher drug release only in the case of polymersomes with lower molecular weight PEG.

Polypeptides Micelles Composed of Methoxy-Poly(Ethylene Glycol)-Poly(l-Glutamic Acid)-Poly(l-Phenylalanine) Triblock Polymer for Sustained Drug Delivery

Methoxy-poly(ethylene glycol)-poly(l-glutamic acid)-poly(l-phenylalanine) triblock polymers with different architecture were synthesized as drug carrier to obtain sustained and controlled release by tuning the composition. These triblock polymers were prepared by ring opening polymerization and poly(ethylene glycol) was used as an initiator. Polymerization was confirmed by ¹H NMR, FT-IR and gel penetration chromatography. The polymers can self-assemble to form micelles in aqueous medium and their critical micelle concentrations values were examined. The micelles were spherical shape with size of 50–100 nm and especially can arranged in a regular manner. Sorafenib was selected as the model drug and the drug loading performance was dependent on the composition of the block copolymer. In vitro drug release indicated that the polymers can realize controlled and sustained drug release. Furthermore, in vitro cytotoxicity assay showed that the polymers were biocompatible and the drug-loaded micelles can increase toxicity towards tumor cells. Confocal fluorescence microscopy assays illustrated that the micelles can be uptaken quickly and release drug persistently to inhibit tumor cell growth.

Polyprodrug Antimicrobials: Remarkable Membrane Damage and Concurrent Drug Release to Combat Antibiotic Resistance of Methicillin-Resistant Staphylococcus aureus

The increased threat of antibiotic resistance has created an urgent need for new strategies. Herein, polyprodrug antimicrobials are proposed to mimic antimicrobial peptides appended with a concurrent drug release property, exhibiting broad-spectrum antibacterial activity and especially high potency to inhibit methicillin-resistant Staphylococcus aureus (MRSA) without inducing resistance. Two series of polyprodrug antimicrobials are fabricated by facile polymerization of triclosan prodrug monomer (TMA) and subsequent quaternization of hydrophilic poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), affording PDMAEMA-b-PTMA and PQDMA-b-PTMA, respectively. Optimized samples with proper hydrophobic ratio are screened out, which exhibit remarkable bacterial inhibition and low hemolysis toward red blood cells. Furthermore, synergistic antibacterial mechanisms contribute to the bacteria killing, including serious membrane damage, increased out-diffusion of cytosolic milieu across the membrane, and intracellular reductive milieu-mediated triclosan release. No detectable resistance is observed for polyprodrug antimicrobials against MRSA, which is demonstrated to be better than commercial triclosan and vancomycin against in vivo MRSA-infected burn models and a promising approach to the hurdle of antibiotic resistance in biomedicine.

UV-Initiated Ring Opening Polymerization of l-Lactide Using a Photobase Generator

Photoinitiated ring-opening polymerization of l-lactide (L-LA) using a photobase generator (PBG) able to release 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) is reported. Polymerization using the PBG with ketoprofenate counteranion (TBDH⁺.keto^-) was studied in dichloromethane either in the presence or in the absence of 1-butanol as initiator. In both cases, full monomer conversion was reached at room temperature after 10 min of irradiation at 254 nm. In the presence of 1-butanol, linear poly(L-LA) chains (PLA) were obtained, as confirmed by ¹H NMR and MALDI-TOF analyses. The polymerization was well controlled as attested by the production of polymers with low dispersity (Đ < 1.26) and by the linear evolution of molecular weights with the quantity of initiator. Without 1-butanol, although MALDI-TOF analyses revealed cyclic PLA chains (actually formed in situ during MALDI-TOF analysis), linear PLA chains were formed as proven by ¹H NMR, viscosity measurement, and phosphitylation titration. This fast and "on demand" polymerization opens the way to biodegradable UV coatings.

Biodegradable Nanocomposite Antimicrobials for the Eradication of Multidrug-Resistant Bacterial Biofilms without Accumulated Resistance

Infections caused by multidrug-resistant (MDR) bacteria are a rapidly growing threat to human health, in many cases exacerbated by their presence in biofilms. We report here a biocompatible oil-in-water cross-linked polymeric nanocomposite that degrades in the presence of physiologically relevant biomolecules. These degradable nanocomposites demonstrated broad-spectrum penetration and elimination of MDR bacteria, eliminating biofilms with no toxicity to cocultured mammalian fibroblast cells. Notably, serial passaging revealed that bacteria were unable to develop resistance toward these nanocomposites, highlighting the therapeutic promise of this platform.

Fluorescent Polymersomes with Aggregation-Induced Emission

Fluorescent polymersomes are interesting systems for cell/tissue imaging and in vivo study of drug distribution and delivery. We report on bright fluorescent polymersomes with aggregation-induced emission self-assembled by a series of tetraphenylethylene (TPE)-containing amphiphilic biodegradable block copolymers, where the hydrophilic block is a polyethylene glycol and hydrophobic block is a TPE-substituted trimethylenecarbonate polymer P(TPE-TMC). Their self-assemblies in water were prepared by nanoprecipitation using dioxane or tetrahydrofuran as co-solvent, and the self-assembling processes were studied in detail by cryo-electron microscopy, dynamic light scattering, and spectrofluorometer. The polymersomes are formed via the closure of bilayer lamellae self-assembled first by amphiphilic block copolymers. The polymersome membrane affords a nanosize bright fluorescent system with self-assembly induced emission in the thickness scale of 10-15 nm. The control of the whole size of polymersome is achieved by the choice of co-solvent for self-assembling and by the design of a suitable hydrophilic/hydrophobic ratio of block copolymers. These polymersomes can be potentially used as a stable fluorescent tool to monitor the transportation and distribution of drugs and bioconjugates in living cells.

Physical stimuli-responsive liposomes and polymersomes as drug delivery vehicles based on phase transitions in the membrane

This paper reviews liposomes with crystalline phase and polymersomes exhibiting crystalline and thermotropic liquid crystalline phases in the membrane. Intriguing morphologies of vesicles are described, including spherical, ellipsoidal and faceted vesicles, produced by a large variety of amphiphilic molecules and polymers with nematic phase, smectic phase or crystalline phase. It is highlighted how the phase transitions and the phase grain boundaries could be used ingeniously to destabilize the vesicular structure and to achieve cargo-release under the action of external stimulation. These liposomes and polymersomes are responsive to physical stimuli, such as temperature variation, shear stress, light illumination, and magnetic and electric fields. These stimuli-responsive properties make them promising candidates as new smart drug delivery systems.

Nanoreactors for green catalysis

Sustainable and environmentally benign production are key drivers for developments in the chemical industrial sector, as protecting our planet has become a significant element that should be considered for every industrial breakthrough or technological advancement. As a result, the concept of green chemistry has been recently defined to guide chemists towards minimizing any harmful outcome of chemical processes in either industry or research. Towards greener reactions, scientists have developed various approaches in order to decrease environmental risks while attaining chemical sustainability and elegancy. Utilizing catalytic nanoreactors for greener reactions, for facilitating multistep synthetic pathways in one-pot procedures, is imperative with far-reaching implications in the field. This review is focused on the applications of some of the most used nanoreactors in catalysis, namely: (polymer) vesicles, micelles, dendrimers and nanogels. The ability and efficiency of catalytic nanoreactors to carry out organic reactions in water, to perform cascade reaction and their ability to be recycled will be discussed.

Hybrid block copolymers of polyesters/polycarbonates and polypeptides synthesized via one-pot sequential ring-opening polymerization

Polyester/polycarbonate-b-polypeptide hybrid block copolymers were synthesized by a sequential ring-opening polymerization in a one-pot manner.

"Grafting-from" synthesis and characterization of poly (2-ethyl-2-oxazoline)-b-poly (benzyl L-glutamate) micellar nanoparticles for potential biomedical applications

Introduction: Recent advances in the field of poly (2-oxazolines) as bio-inspired synthetic pseudopeptides have proven their potential biomedical applications such as drug delivery and tissue engineering. Methods: In order to fabricate a biodegradable micellar nanoparticle of poly (2-ethyl 2-oxazoline)-b-poly (benzyl L-glutamate) or pEOx-b-pBLG, "grafting-from" synthesis approach was used involving consecutive steps of cationic ring-opening polymerization of 2-ethyl-2-oxazoline, amine functionalization of pEOx using 1-Boc-piperazine and N-carboxyanhydride polymerization of γ-benzyl- L-glutamate. Following hydrolysis of the copolymer, the protecting γ-benzyl groups were removed yielding a double-hydrophilic block ionomer of pEOx-b-poly (L-glutamic acid). The polymers were characterized by FTIR, 1H-NMR, size exclusion chromatography and differential scanning calorimetry (DSC). Aqueous assembly of the polymers was investigated by pyrene assay, dynamic light scattering, and transmission electron microscopy. MTT cytotoxicity assay was also performed to determine the cytocompatibility in various tumor cell lines. Results: The polymeric micelles presented a uni-modal size distribution with mean hydrodynamic diameter of 149.8 ± 10.6 nm and critical aggregation concentration of 60 µg/mL. The average molecular weight of pEOx increased from ~ 14 to 20 kDa for pEOx-b-poly (L-glutamic acid) as determined by light scattering (Debye plot), indicating a successful copolymerization. MTT assay showed little to no practical cytotoxicity at concentrations below 1 mg/mL. Conclusion: Multi-step synthesis of pEOx-b-pBLG and subsequent alkaline hydrolysis were performed to obtain the block ionomer pEOx-b-poly (L-glutamic acid). Both pEOx-based copolymers can be considered for various potential applications such as loading and delivery of drugs, genes, and contrast agents either by chemical conjugation or physical loading.

Vesicles from Amphiphilic Dumbbells and Janus Dendrimers: Bioinspired Self-Assembled Structures for Biomedical Applications

The current review focuses on vesicles obtained from the self-assembly of two types of dendritic macromolecules, namely amphiphilic Janus dendrimers (forming dendrimersomes) and amphiphilic dumbbells. In the first part, we will present some synthetic strategies and the various building blocks that can be used to obtain dendritic-based macromolecules, thereby showing their structural versatility. We put our focus on amphiphilic Janus dendrimers and amphiphilic dumbbells that form vesicles in water but we also encompass vesicles formed thereof in organic solvents. The second part of this review deals with the production methods of these vesicles at the nanoscale but also at the microscale. Furthermore, the influence of various parameters (intrinsic to the amphiphilic JD and extrinsic-from the environment) on the type of vesicle formed will be discussed. In the third part, we will review the numerous biomedical applications of these vesicles of nano- or micron-size.

Ring-Opening Polymerization of N-Carboxyanhydrides Initiated by a Hydroxyl Group

We report on a method for preparation of well-defined synthetic polypeptides by ring-opening polymerization (ROP) of α-amino acid N-carboxyanhydrides (NCA) initiated by a hydroxyl group. To overcome the issue of slow initiation by hydroxyl group, an acid catalyst was used in the initiation step to catalyze opening of the NCA ring by the hydroxyl group and to simultaneously suppress further chain propagation by protonation of the formed amine group. In this way, we have separated slow initiation from the fast chain propagation, since such a combination leads to poorly defined products, and instead performed them in a successive manner. Only after completion of the initiation, the propagation was started by the addition of a base to deprotonate the ammonium group. This method was successfully applied for the synthesis of homopolypeptides by using alcohol as an initiator as well as polypeptide-based block copolymers by using poly(ethylene glycol) or poly(styrene) macroinitiator terminated with the hydroxyl group. This approach not only expands the pool of possible initiators, but also significantly facilities the preparation of polypeptide-based hybrid polymers.

pH-responsive nanoparticle assembly from peptide amphiphiles for tumor targeting drug delivery

In this paper, the peptide amphiphiles (PA) which consists of RGDSEEEEEEEEEEK as pH-sensitive segment and stearic acid as hydrophobic segment named RGDS-E₁₀-Lys(C₁₈) was successfully synthesized. TEM images showed that uniformly dispersed nanoparticles could be formed by PA molecules in pH 7.4 medium, however, disintegrated in pH 5.0 medium. Circular dichroism (CD) spectrum indicated that polypeptide adopted a random-coil conformation in neutral medium (pH 7.4). The CD signal was significantly attenuate for decreased solubility of PA in medium with pH 5.0. As expected, the prepared RGDS-E₁₀-Lys(C₁₈) assembly showed high pH-sensitive property which demonstrated a much more rapid drug release from micelles in tumor tissue (acidic environment) than in physiological environment (neutral environment). After DOX-loaded micelles incubated with tumor cells, the cytotoxicity of the micelles against Hela cells was increased obviously, indicating the great potential of micelles developed here as promising vehicle for targeted pH-responsive drug delivery.

Polymeric vesicle formation via temperature-assisted nanoprecipitation

We here report an easy and efficient strategy to prepare submicron-sized polymeric vesicles with tetrahydrofuran (THF) as a good solvent through temperature-assisted nanoprecipitation (TAN).

Size Control and Fractionation of Ionic Liquid Filled Polymersomes with Glassy and Rubbery Bilayer Membranes

We demonstrate control over the size of ionic liquid (IL) filled polymeric vesicles (polymersomes) by three distinct methods: mechanical extrusion, cosolvent-based processing in an IL, and fractionation of polymersomes in a biphasic system of IL and water. For the representative ionic liquid (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide ([EMIM][TFSI])), the size and dispersity of polymersomes formed from 1,2-polybutadiene-b-poly(ethylene oxide) (PB-PEO) and polystyrene-b-poly(ethylene oxide) (PS-PEO) diblock copolymers were shown to be sensitive to assembly conditions. During mechanical extrusion through a polycarbonate membrane, the relatively larger polymersomes were broken up and reorganized into vesicles with mean size comparable to the membrane pore (100 nm radius); the distribution width also decreased significantly after only a few passes. Other routes were studied using the solvent-switch or cosolvent (CS) method, whereby the initial content of the cosolvent and the PEO block length of PS-PEO were systemically changed. The nonvolatility of the ionic liquid directly led to the desired concentration of polymersomes in the ionic liquid using a single step, without the dialysis conventionally used in aqueous systems, and the mean vesicle size depended on the amount of cosolvent employed. Finally, selective phase transfer of PS-PEO polymersomes based on size was used to extract larger polymersomes from the IL to the aqueous phase via interfacial tension controlled phase transfer. The interfacial tension between the PS membrane and the aqueous phase was varied with the concentration of sodium chloride (NaCl) in the aqueous phase; then the larger polymersomes were selectively separated to the aqueous phase due to differences in shielding of the hydrophobic core (PS) coverage by the hydrophilic corona brush (PEO). This novel fractionation is a simple separation process without any special apparatus and can help to prepare monodisperse polymersomes and also separate unwanted morphologies (in this case, worm-like micelles).

Comparison of methods for the fabrication and the characterization of polymer self-assemblies: what are the important parameters?

The ability to self-assemble was evaluated for a large variety of amphiphilic block copolymers, including poly(ethyleneoxide-b-ε-caprolactone), poly(ethyleneoxide-b-d,l-lactide), poly(ethyleneoxide-b-styrene), poly(ethyleneoxide-b-butadiene) and poly(ethyleneoxide-b-methylmethacrylate). Different methods of formation are discussed, such as cosolvent addition, film hydration or electroformation. The influence of experimental parameters and macromolecular structures on the size and morphology of the final self-assembled structures is investigated and critically compared with the literature. The same process is carried out regarding the characterization of these structures. This analysis demonstrates the great care that should be taken when dealing with such polymeric assemblies. If the morphology of such assemblies can be predicted to some extent by macromolecular parameters like the hydrophilic/hydrophobic balance, those parameters cannot be considered as universal. In addition, external experimental parameters (methods of preparation, use of co-solvent, …) appeared as critical key parameters to obtain a good control over the final structure of such objects, which are very often not at thermodynamic equilibrium but kinetically frozen. A principal component analysis is also proposed, in order to examine the important parameters for forming the self-assemblies. Here again, the hydrophilic/hydrophobic fraction is identified as an important parameter.

Poly(trimethylene carbonate)-based polymers engineered for biodegradable functional biomaterials

This review presents recent examples of applications and functionalization strategies of poly(trimethylene carbonate), its copolymers, and its derivatives to exploit the unique physicochemical properties of the aliphatic polycarbonate backbone.

Nano-capsules of amphiphilic poly(ethylene glycol)-block-poly(bisphenol A carbonate) copolymers via thermodynamic entrapment

Fast and simple preparation of nano-capsules by water addition to poly(ethylene glycol)-block-poly(bisphenol A carbonate) copolymers in THF.

Doxorubicin-loaded polypeptide nanorods based on electrostatic interactions for cancer therapy

An amphiphilic anionic polypeptide, methoxypolyethylene glycol-poly (glutamic acid) (mPEG-PGA), was synthesized, characterized and evaluated as a nanocarrier for the cationic anticancer drug doxorubicin hydrochloride (DOX·HCl). The complex self-assembled into nanorods in aqueous solutions via electrostatic interactions and exhibited a superior drug loading content (50.8%) and drug loading efficiency (90.2%). The average major axis of the drug-loaded nanorods was approximately 300nm, as determined by transmission electron microscopy. An in vitro release assay showed that drug-loaded nanorods exhibited pH-sensitivity and sustained release. Haemolysis assays demonstrated that the polypeptide was haemocompatible, and the polypeptide drug carrier significantly reduced the haemolysis ratio of DOX·HCl. The pharmacokinetics study showed that DOX-loaded nanorods significantly prolonged the resident time in blood. An in vitro cytotoxicity study and cellular uptake assays demonstrated that the DOX-loaded nanorods resulted in higher cell proliferation inhibition and a higher level of tumour cell uptake in A549 cells than with free DOX·HCl. The prolonged circulation and enhanced antitumor efficacy of DOX-loaded nanorods shows promise for efficient cancer chemotherapy.