Investigation of the NaBH4-induced aggregation of Au nanoparticles

A simultaneous strategy with multiple-signal amplification and self-calibration for ultrasensitive assay of miRNA-21 based on 3D MNPs-IL-rGO-AuNPs

MicroRNA-21 (miRNA-21) is a significant biomarker for the development and progression of diverse cancers but is present in relatively low concentrations. Detecting such low-abundance molecules accurately can be challenging, especially in early-stage cancers where the concentration may be even lower. Herein, a self-calibration biosensing platform based on 3D novel MNPs-IL-rGO-AuNPs nanocomposites was successfully established for the ultrasensitive detection of miRNA-21. Duplex-specific nuclease (DSN) was introduced to recognize perfectly matched duplexes and trigger target recycling, enhancing the specificity and sensitivity of the biosensor. DSN-assisted target recycling, in conjunction with magnetic separation enrichment and high-performance MNPs-IL-rGO-AuNPs, collectively formed a multiple-signal amplification strategy. The obtained biosensor could output dual signals in both electrochemical and fluorescent modes, enabling self-correcting detection to enhance the accuracy. The obtained dual-mode biosensor prepared exhibited a wide detection range from 5 fM to 100 nM with a remarkably low LOD of 1.601 fM. It accomplished the sensitive evaluation of miRNA-21 in total RNA extracted from various human cancer cell lines and normal cell lines. Additionally, the greatly satisfactory outcomes in the analysis of human serum samples suggested that the proposed biosensor was a powerful screening candidate in early clinical diagnosis of cancer.

Water-soluble ionic carbon nitride as unconventional stabilizer for highly catalytically active ultrafine gold nanoparticles

Ultrafine metal nanoparticles (NPs) hold promise for applications in many fields, including catalysis. However, ultrasmall NPs are typically prone to aggregation, which often leads to performance losses, such as severe deactivation in catalysis. Conventional stabilization strategies (e.g., immobilization, embedding, or surface modification by capping agents) are typically only partly effective and often lead to loss of catalytic activity. Herein, a novel type of stabilizers based on water-soluble ionic (K+ and Na+ containing) polymeric carbon nitride (i.e., K,Na-poly(heptazine imide) = K,Na-PHI) is reported that enables effective stabilization of highly catalytically active ultrafine (size of ∼2-3 nm) gold NPs. Experimental and theoretical comparative studies using different structural units of K,Na-PHI (i.e., cyanurate, melonate, cyamelurate) indicate that the presence of functionalized heptazine moieties is crucial for the synthesis and stabilization of small Au NPs. The K,Na-PHI-stabilized Au NPs exhibit remarkable dispersibility and outstanding stability even in solutions of high ionic strength, which is ascribed to more effective charge delocalization in the large heptazine units, resulting in more effective electrostatic stabilization of Au NPs. The outstanding catalytic performance of Au NPs stabilized by K,Na-PHI is demonstrated using the selective reduction of 4-nitrophenol to 4-aminophenol by NaBH4 as a model reaction, in which they outperform even the benchmark "naked" Au NPs electrostatically stabilized by excess NaBH4. This work thus establishes ionic carbon nitrides (PHI) as alternative capping agents enabling effective stabilization without compromising surface catalysis, and opens up a route for further developments in utilizing PHI-based stabilizers for the synthesis of high-performance nanocatalysts.

Modulating luminescence and assembled shapes of ultrasmall Au nanoparticles towards hierarchical information encryption

Because of their intriguing luminescence performances, ultrasmall Au nanoparticles (AuNPs) and their assemblies hold great potential in diverse applications, including information security. However, modulating luminescence and assembled shapes of ultrasmall AuNPs to achieve a high-security level of stored information is an enduring and significant challenge. Herein, we report a facile strategy using Pluronic F127 as an adaptive template for preparing Au nanoassemblies (AuNAs) with controllable structures and tunable luminescence to realize hierarchical information encryption through modulating excitation light. The template guided ultrasmall AuNP in situ growth in the inner core and assembled these ultrasmall AuNPs into intriguing necklace-like or spherical nanoarchitectures. By regulating the type of ligand and reductant, their emission was also tunable, ranging from green to the second near-infrared (NIR-II) region. The excitation-dependent emission could be shifted from red to NIR-II, and this significant shift was considerably distinct from the small range variation of conventional nanomaterials in the visible region. In virtue of tunable luminescence and controllable structures, we expanded their potential utility to hierarchical information encryption, and the true information could be decrypted in a two-step sequential manner by regulating excitation light. These findings provided a novel pathway for creating uniform nanomaterials with desired functions for potential applications in information security.

Malachite Green Dye Decoloration over Au/TiO2-Nanotubes Photocatalyst under Simulate Visible-Light Irradiation

Au nanoparticles were supported on TiO₂ nanotubes by a novel vapor phase impregnation approach (VPI) using gold dimethyl-acetylacetonate as a precursor. This study aimed to evaluate the capacity of these materials in the photodecoloration of malachite green dye, with the vision to correlate the chemical, structural, morphological, and optical properties with its photocatalytic performance. The photocatalysts were characterized by X-ray diffraction, Raman spectroscopy, X-ray photoelectronic spectroscopy (XPS), electronic microscopy (HAADF-STEM and HRTEM), and UV-vis spectroscopy. The techniques mentioned above made it possible to detect the presence of small gold nanoparticles (around 3.1 nm), with a high apparent dispersion even at high metal loading for all analyzed systems. According to the XPS results, the Au nanoparticles remain reduced (Au°), and they have a high electronic interaction with TiO₂, which eventually originates an electronic exchange between them and consequently a decrease in the band gap energy. In addition, the surface plasmonic resonance observed through UV-vis spectroscopy of the Au nanoparticles are factors that can be related to the high decoloration observed in these photocatalysts, specifically in the 15 wt% Au material, which achieves maximum photodecoloration of malachite green dye at 93%.

Recent Advances in Plasmonic Photocatalysis Based on TiO2 and Noble Metal Nanoparticles for Energy Conversion, Environmental Remediation, and Organic Synthesis

Plasmonic photocatalysis has emerged as a prominent and growing field. It enables the efficient use of sunlight as an abundant and renewable energy source to drive a myriad of chemical reactions. For instance, plasmonic photocatalysis in materials comprising TiO₂ and plasmonic nanoparticles (NPs) enables effective charge carrier separation and the tuning of optical response to longer wavelength regions (visible and near infrared). In fact, TiO₂ -based materials and plasmonic effects are at the forefront of heterogeneous photocatalysis, having applications in energy conversion, production of liquid fuels, wastewater treatment, nitrogen fixation, and organic synthesis. This review aims to comprehensively summarize the fundamentals and to provide the guidelines for future work in the field of TiO₂ -based plasmonic photocatalysis comprising the above-mentioned applications. The concepts and state-of-the-art description of important parameters including the formation of Schottky junctions, hot electron generation and transfer, near field electromagnetic enhancement, plasmon resonance energy transfer, scattering, and photothermal heating effects have been covered in this review. Synthetic approaches and the effect of various physicochemical parameters in plasmon-mediated TiO₂ -based materials on performances are discussed. It is envisioned that this review may inspire and provide insights into the rational development of the next generation of TiO₂ -based plasmonic photocatalysts with target performances and enhanced selectivities.

Colorimetric Measurement of Deltamethrin Pesticide Using a Paper Sensor Based on Aggregation of Gold Nanoparticles

Deltamethrin (DEL) is one of the most commonly used pyrethroid pesticides that can cause serious harms to the ecological environment and human health. Herein, we have developed a paper-based colorimetric sensor impregnated with gold nanoparticles (AuNPs) for on-site determination of DEL pesticide. AuNPs show obvious color change on paper device with the presence of DEL. Measuring the gray intensity of the AuNPs on the reaction zone of the paper sensor allows accurate quantitative analysis. The detection mechanism of DEL on paper sensor was confirmed by UV-Vis spectrophotometry (UV-Vis), Fourier transform infrared spectroscopy (FT-IR), and transmission electron microscope (TEM). Under optimal conditions, the colorimetric sensor exhibited high sensitivity, rapid detection, and low detection limit within the values stipulated by Chinese detection standards (LOD = 0.584 mg/L). Besides, detecting DEL in vegetable and fruit samples also gave satisfying results, which were much consistent with those obtained by spectrophotometry. Overall, this work provided a user-friendly, cost-effective and visualized detection platform, which could be applied to rapidly detect DEL pesticides in the food safety field.

Simple synthesis of gold-decorated silica nanoparticles by in situ precipitation method with new plasmonic properties

We describe a simple method for the preparation of gold-decorated silica (SiO2) nanoparticles (NPs) by the in situ precipitation method using simple BH4− ions reduction as a procedure, where BH4− ions are adsorbed onto PEI-functionalized SiO2 NPs for stabilizing and reducing gold ions onto PEI-SiO2 surface in water under ambient conditions. The result was 3-nm gold nanoshell NPs attached to SiO2 core (~ 75 nm) with a surface plasmon resonance (SPR) at ~ 680 nm. SPR band is associated with Au NP aggregates that arise from strong interparticle interaction. This is an alternative to the gold-seeding methods and the use of anionic gold species for the obtention of gold-decorated SiO2 NPs with an important red-shift in UV–Vis absorption and with potential applications in biosensors and photothermal therapy.

Spectrophotometric analysis of stability of gold nanoparticles during catalytic reduction of 4-nitrophenol

Spectrophotometric monitoring of 4-nitrophenol (4-NP) reduction by sodium borohydride (NaBH₄) using gold nanoparticles (GNPs) as a catalyst has been extensively studied, but the stability of GNPs in terms of change in the surface plasmon resonance (SPR) at different temperatures has not been explored. In the present investigation, our aim was to evaluate the SPR stability of GNPs as a catalyst during the reduction of 4-NP at different elevated temperatures (i.e. 30–60 °C) and sodium borohydride concentrations. Sensitivity of this degradation process toward concentration of GNPs at a range of temperatures is also evaluated. The spectrophotometric results reveal that up to 45 °C, 12 ± 1.5 nm catalyst has a consistent optical density (OD) during the entire 4-NP reduction process, which is related to the surface integrity of catalyst atoms. As the temperature approached 50 °C, the OD gradually decreased and showed a blue shift as the reaction proceeded, which could be related to a decrease in particle size or surface dissolution of gold atoms. The present study may find application in the design of catalysts for the reduction of organic pollutants in industrial wastewater at a range of temperatures.

Adsorption of dipeptide L-alanyl-L-tryptophan on gold colloidal nanoparticles studied by surface-enhanced Raman spectroscopy

Surface adsorption of a dipeptide L-alanyl-L-tryptophan (Ala-Trp) on gold nanoparticles reduced by citrate (CT) and borohydride (BH) ions was investigated by a surface-enhanced Raman scattering (SERS) technique. Two distinct SERS spectra of Ala-Trp depending on the types of gold nanoparticles were observed, and the vibrational assignments were based on the density functional theory simulations and the previous SERS results of Trp. Ala-Trp mainly adsorbs through the amine group on CT gold nanoparticles with a perpendicular orientation of the indole ring to the surface. In contrast, the adsorption occurs via the π electrons of the indole ring on the BH gold surfaces while maintaining a flat geometry of the indole ring to the surface. The amide I band of Ala-Trp was observed only with the CT gold colloids in acidic and neutral conditions where partial surface adsorption via the amide group is expected.

Tailoring the Morphology and Fractal Dimension of 2D Mesh-like Gold Gels

As there is a great demand of 2D metal networks, especially out of gold for a plethora of applications we show a universal synthetic method via phase boundary gelation which allows the fabrication of networks displaying areas of up to 2 cm². They are transferred to many different substrates: glass, glassy carbon, silicon, or polymers such as PDMS. In addition to the standardly used web thickness, the networks are parametrized by their fractal dimension. By variation of experimental conditions, we produced web thicknesses between 4.1 nm and 14.7 nm and fractal dimensions in the span of 1.56 to 1.76 which allows to tailor the structures to fit for various applications. Furthermore, the morphology can be tailored by stacking sheets of the networks. For each different metal network, we determined its optical transmission and sheet resistance. The obtained values of up to 97 % transparency and sheet resistances as low as 55.9 Ω/sq highlight the great potential of the obtained materials.

A catalytic study of water dispersed gold nanoparticles for the hydrolytic oxidation of diorganosilanes – en route formation of a Pickering catalyst and synthesis of tetraorganodisiloxane-1,3-diols

This study unfolds the formation of a AuNP-stabilized Pickering catalyst (PIC) en route to the hydrolytic oxidation of diorganosilanes. The method offers a viable route for the synthesis of disiloxane-1,3-diols.

Identification of the key steps in the self-assembly of homogeneous gold metal nanoparticles produced using inverse micelles

The self-assembly of gold nanoparticles (Au NPs) using polymer-encapsulated inverse micelles was studied using a set of advanced X-ray techniques (i.e. XAFS, SAXS) in addition to DLS, UV-vis spectroscopy and TEM. Importantly the combination of these techniques with the inverse micelle approach affords us detailed insight and to rationalize the evolving molecular chemistry and how this drives the formation of the Au NPs. We observe that the mechanism comprises three key steps: an initial fast reduction of molecular Au(iii) species to molecular Au(i)Cl; the latter species are often very unstable during the self-assembly process. This is followed by a gradual reduction of these molecular Au(i) species and the formation of sub-nanometric Au clusters which coalesce into nanoparticles. It was also found that addition of small amounts of HCl can accelerate the formation of the Au clusters (the second phase) without affecting the final particle size or its particle size distribution. These findings would help us to understand the reaction mechanism of Au NP formation as well as providing insights into how NP properties could be further tailored for a wide range of practical applications.

Structure and dynamics of gold nanoparticles decorated with chitosan–gentamicin conjugates: ReaxFF molecular dynamics simulations to disclose drug delivery

Functionalized gold nanoparticles for antibiotic drug delivery: from the nanoscale to the atomic scale.

In-Situ Deposition of Plasmonic Gold Nanotriangles and Nanoprisms onto Layered Hydroxides for Full-Range Photocatalytic Response towards the Selective Reduction of p-Nitrophenol

In this work, we present photocatalysis as a greener alternative to conventional catalysis where harsh reaction conditions, temperature and/or pressure are needed. Photodegradation of organic pollutants is a cost-effective, eco-friendly solution for the decontamination of water and air, and is a field that has been continuously growing over the last decade. Plasmonic metal nanoparticles absorb light irradiation that is transferred to the chemical reaction in a different fashion. Furthermore, plasmonic nanostructures can be combined with other materials, such as semiconductors or a basic support, to create hybrid systems capable of overcoming certain challenges that photocatalysis is facing nowadays and to expand the photocatalytic response towards the whole visible-near infrared (Vis-NIR) ranges. The main objective of this work has been to in-situ synthesize plasmonic anisotropic gold nanoparticles onto hydrotalcite (HT) and calcined hydrotalcite (CHT) supports by way of a sequential deposition-reduction (DR) process and to evaluate their efficiency as heterogeneous catalysts towards the selective oxidation of p-nitrophenol (hereafter 4-NP), a well-known model contaminant, either in the absence or the presence of full-range light irradiation sources (LEDs) spanning the whole UV-Vis-NIR range. Special attention has been paid to the optimization of the catalyst preparation parameters, including the pH and the concentration of reducing and stabilizing agents. Interestingly, the use of thermally modified hydrotalcites has enabled a strong metal-support interaction to induce the preferential formation of triangular-shaped Au nanoparticles with ca. 0.8 wt.% loading while increasing the colloidal stability and surface area of the catalyst with respect to the commercial untreated HT supports.

Strong resistance of citrate anions on metal nanoparticles to desorption under thiol functionalization

Thiols are widely utilized to functionalize metal nanoparticles, including ubiquitous citrate-stabilized gold nanoparticles (AuNPs), for fundamental studies and biomedical applications. For more than two decades, citrate-to-thiol ligand exchange has been used to introduce functionality to AuNPs in the 5-100 nm size regime. Contrary to conventional assumptions about the completion of ligand exchange processes and formation of a uniform self-assembled monolayer (SAM) on the NP surface, coadsorption of thiols with preadsorbed citrates as a mixed layer on AuNPs is demonstrated. Hydrogen bonding between carboxyl moieties primarily is attributed to the strong adsorption of citrate, leading to the formation of a stabilized network that is challenging to displace. In these studies, adsorbed citrates, probed by Fourier transform infrared and X-ray photoelectron spectroscopy (XPS) analyses, remain on the surface following thiol addition to the AuNPs, whereas acetoacetate anions are desorbed. XPS quantitative analysis indicates that the surface density of alkyl and aryl thiolates for AuNPs with an average diameter of ∼40 nm is 50-65% of the value of a close-packed SAM on Au(111). We present a detailed citrate/thiolate coadsorption model that describes this final mixed surface composition. Intermolecular interactions between weakly coordinated oxyanions, such as polyprotic carboxylic acids, can lead to enhanced stability of the metal-ligand interactions, and this needs to be considered in the surface modification of metal nanoparticles by thiols or other anchor groups.

Partial aggregation of silver nanoparticles induced by capping and reducing agents competition

It is well known that nanomaterials properties and applications are dependent on the size, shape, and morphology of these structures. Among nanomaterials, silver nanoparticles (AgNPs) have attracted attention since they have considerably versatile properties, such as a variable surface area to volume ratio, which is very useful for many biomedical and technological applications. Within this scenario, small nanoparticle aggregates can have their properties reduced due to the increased size and alterations in their shape/morphology. In this work, silver nanoparticles aggregation was studied through chemical reduction of silver nitrate in the presence of sodium borohydride (reducing agent) and sodium citrate (capping agent). By changing the amount of reducing agent along the reaction, unaggregated and partially aggregated samples were obtained and characterized by UV-vis, zeta potential, and SAXS techniques. pH was measured in every step of the reaction in order to correlate these results with those obtained from structural techniques. Addition of the reducing agent first causes the reduction of Ag(+) to silver nanoparticles. For higher concentrations of sodium borohydrate, the average AgNPs size is increased and NPs aggregation is observed. It was found that zeta potential and pH values have a strong influence on AgNPs formation, since reducing agent addition can induce partial removal of citrate weakly associated on the AgNPs surface and increase the ionic strength of the solution, promoting partial aggregation of the particles. This aggregation state was duly identified by coupling SAXS, zeta potential and pH measurements. In addition, the SAXS technique showed that aggregates formed along the process are elongated-like particles due to the exponential decay evidenced through SAXS curves.

Investigation of halide-induced aggregation of Au nanoparticles into spongelike gold

We present a facile method for fabricating spongelike Au structures by halide-induced aggregation and fusion of gold nanoparticles (AuNPs). Halide ions (F(-), Cl(-), Br(-), and I(-)) showed distinctly different effects on the synthesized AuNPs, which were characterized by localized surface plasmon resonance (LSPR) and dynamic light scattering measurements. A noticeable red-shift in the LSPR peak was found after Br(-) and I(-) ion treatment, which indicates the adsorption of halide atoms or ions on the AuNPs. The surface potential of AuNPs varied by treatment with different types of halides; this finding indicates that different halide ions have different effects on the AuNPs. Br(-) and I(-) ions showed strong affinity toward the AuNPs. The different affinities of halide ions toward the AuNPs play an important role in controlling the formation process of spongelike gold. Citrate ions adsorbed on AuNPs were displaced by halide ions to different extents. Such displacement determined the aggregation and fusion behaviors of the AuNPs and eventually the formation of different spongelike structures.

Environmental assessment of 2-mercaptobenzimidazole based on the surface plasmon resonance band of gold nanoparticles

A colorimetric assay method is described for the environmental detection of 2-mercaptobenzimidazole (MBI) using surface plasmon resonance of gold nanoparticles (AuNPs). Stable and dispersed AuNPs with intensified plasmon resonance were prepared in situ using a simple, rapid, and eco-friendly procedure by applying ascorbic acid as a reducer and cetyltrimethylammonium bromide as a stabilizer. The presence of MBI has a strong effect on the plasmon absorbance of AuNPs, which was employed for the detection of MBI. The calibration curve was linear in the range of 1.0 × 10(-6)-5.5 × 10(-5) mol/L of MBI; the detection limit was 8.4 × 10(-7) mol/L. The relative standard deviations for eight replicate measurements of 3.0 × 10(-6) and 5 × 10(-5) mol/L MBI were 3.9 and 1.4%, respectively. The method was successfully applied to the determination of MBI in tap, river, sea, and heat exchanger cooling water samples.

Two-photon induced photoluminescence and singlet oxygen generation from aggregated gold nanoparticles

Metal nanoparticles have potential applications as bioimaging and photosensitizing agents. Aggregation effects are generally believed to be adverse to their biomedical applications. Here we have studied the aggregation effects on two-photon induced photoluminescence and singlet oxygen generation of Au nanospheres and Au nanorods of two different aspect ratios. Aggregated Au nanospheres and short Au nanorods were found to display enhanced two-photon induced photoluminescence and singlet oxygen generation capabilities compared to the unaggregated ones. The two-photon photoluminescence of Au nanospheres and short Au nanorods were enhanced by up to 15.0- and 2.0-fold upon aggregation, and the corresponding two-photon induced singlet oxygen generation capabilities were enhanced by 8.3 and 1.8-fold, respectively. The two-photon induced photoluminescence and singlet oxygen generation of the aggregated long Au nanorods were found to be lower than the unaggregated ones. These results support that the change in their two-photon induced photoluminescence and singlet oxygen generation originate from aggregation modulated two-photon excitation efficiency. This finding is expected to foster more biomedical applications of metal nanoparticles as Au nanoparticles normally exist in an aggregated form in the biological environments. Considering their excellent biocompatibility, high inertness, ready conjugation, and easy preparation, Au nanoparticles are expected to find more applications in two-photon imaging and two-photon photodynamic therapy.

Efficient general procedure to access a diversity of gold(0) particles and gold(I) phosphine complexes from a simple HAuCl4 source. Localization of homogeneous/heterogeneous system's interface and field-emission scanning electron microscopy study

Soluble gold precatalysts, aimed for homogeneous catalysis, under certain conditions may form nanoparticles, which dramatically change the mechanism and initiate different chemistry. The present study addresses the question of designing gold catalysts, taking into account possible interconversions and contamination at the homogeneous/heterogeneous system's interface. It was revealed that accurate localization of boundary experimental conditions for formation of molecular gold complexes in solution versus nucleation and growth of gold particles opens new opportunities for well-known gold chemistry. Within the developed concept, a series of practical procedures was created for efficient synthesis of soluble gold complexes with various phosphine ligands (R3P)AuCl (90-99% yield) and for preparation of different types of gold materials. The effect of the ligand on the particles growth in solution has been observed and characterized with high-resolution field-emission scanning electron microscopy (FE-SEM) study. Two unique types of nanostructured gold materials were prepared: hierarchical agglomerates and gold mirror composed of ultrafine smoothly shaped particles.

NaBH4-induced assembly of immobilized Au nanoparticles into chainlike structures on a chemically modified glass surface

A facile method of obtaining chainlike assemblies of gold nanoparticles (AuNPs) on a chemically modified glass surface based on NaBH(4) treatment is developed. Citrate-stabilized AuNPs (17 nm) are immobilized on a glutaraldehyde-functionalized glass surface and assembled into chainlike structures after treatment with aqueous sodium borohydride (NaBH(4)) solution. The production and morphology of the AuNP chainlike assemblies are controlled by the density of the immobilized NPs, the concentration of NaBH(4) solution, and the treatment time. The AuNP assemblies are stable in water and can undergo drying. X-ray photoelectron spectroscopic data show that the number of citrate ions on the AuNPs decreased by 43% after treatment with 5 mg/mL NaBH(4) solution. The NaBH(4)-induced partial removal of the citrate ions and the roughness of the glass surface greatly affect the binding force of AuNPs on the substrate. The immobilized AuNPs begin to move at the solid-liquid interface without desorbing when the strength of the binding force was decreased. These mobile NPs form chainlike assemblies under the driving force of van der Waals interaction and diffusion. This interface-based formation of chainlike assemblies of AuNPs may provide a simple protocol for the 1D assembly of other Au-coated colloidal nanoparticles.

Various Au nanoparticle organizations fabricated through SiO2 monomer induced self-assembly

A novel method has been developed to fabricate the assembly of Au colloidal nanoparticles (NPs) using SiO(2) monomers. The key strategy was the use of a controlled sol-gel procedure including hydrolysis, deposition, and condensation of tetraethyl orthosilicate (TEOS). Namely, the assembly of Au NPs was created by the anisotropic deposition of SiO(2) monomers and subsequent permanent fixing by the growth of a SiO(2) shell. Various assemblies of Au NPs such as dimer, trimer, and pearl-chain morphology were fabricated by systematically changing the concentration and injection speed of TEOS. A longitudinal plasmon resonance band was observed as a result of the assembly of Au NPs and can be tuned from visible to near-infrared by altering the length of pearl-chain morphology. In addition, single Au NP was homogeneously coated with a SiO(2) shell by means of controlling the deposition rate of SiO(2) monomers during a Stöber synthesis without the use of a silane coupling agent or bulk polymer as the surface primer to render the Au surface vitreophilic. The Au NPs (mean size 11.4 nm in diameter) were thus encapsulated into SiO(2) beads with a wide range of sizes (from 20 to 50 nm in diameter). These pure SiO(2)-coated Au beads with tunable shell thickness should be crucial for biosensors, particularly as Raman-tag particles.