Formation of multilayer ultrathin assemblies using chemical lithography

Modulating the Electronic Properties of Au-MoS2 Interfaces Using Functionalized Self-Assembled Monolayers

Molybdenum disulfide (MoS₂) is a transition-metal dichalcogenide with many applications including in electronic devices and sensors. A critical issue in the development of these devices is the high resistance between the metal contact and the molybdenum disulfide layer. In this study, we employ Raman spectroscopy and X-ray photoelectron spectroscopy to investigate the modification of Au-MoS₂ contact properties using functionalized alkanethiolate self-assembled monolayers (SAMs). We demonstrate that both 2H and 1T MoS₂ strongly interact with the underlying Au substrate. The electronic properties of the interface are mediated by the dipole moment of the alkanethiolate SAM, which have a -CH₃, -CO₂C₆F₅, -OH, or -COOH terminal group. Finally, we demonstrate the site-selective deposition of 2H and 1T MoS₂ on micropatterned SAMs to form conducting-semiconducting patterned MoS₂ films.

Time-Resolved In Situ Liquid-Phase Atomic Force Microscopy and Infrared Nanospectroscopy during the Formation of Metal-Organic Framework Thin Films

Metal-organic framework (MOF) thin films show unmatched promise as smart membranes and photocatalytic coatings. However, their nucleation and growth resulting from intricate molecular assembly processes are not well understood yet are crucial to control the thin film properties. Here, we directly observe the nucleation and growth behavior of HKUST-1 thin films by real-time in situ AFM at different temperatures in a Cu-BTC solution. In combination with ex situ infrared (nano)spectroscopy, synthesis at 25 °C reveals initial nucleation of rapidly growing HKUST-1 islands surrounded by a continuously nucleating but slowly growing HKUST-1 carpet. Monitoring at 13 and 50 °C shows the strong impact of temperature on thin film formation, resulting in (partial) nucleation and growth inhibition. The nucleation and growth mechanisms as well as their kinetics provide insights to aid in future rational design of MOF thin films.

Self-assembled monolayer-assisted negative lithography

Self-assembled monolayers (SAMs) have been widely employed as etching resists in wet lithography systems to form patterns in which the ordered molecular packing of the SAM regions significantly delays the etchant attack. A generally accepted recognition is that the SAMs ability to resist etching is positively correlated to the quality of the surface-assembled structures, and a more ordered molecular packing would correspond to a better etching resistance. Such a classical belief is debated in the present work by providing an alternative SAM-assisted negative lithography where ordered SAM regions are etched more quickly than their disordered counterparts. This method features a unique photoirradiation-imprinted patterning process that simply consists of two steps: (1) UV irradiation on an OH-terminated SAM-modified gold surface through a photomask and (2) the subsequent immersion of the exposed substrate in an aqueous etching solution of N-bromosuccinimide/pyridine to develop a wet lithographic pattern. The entire experimental process reveals a finding from previous work that the etching rate on the UV-exposed regions with disordered molecular packing could be modulated to be slower than that in the unexposed well-defined SAM regions. Longer irradiation times would also revert the patterns from negative to positive. Thus, by merely using one kind of SAM-modified surface to provide both positive and negative micropatterns on gold layers, one could obtain flexible opportunities for high-resolution micro/nanofabrication resembling photolithography.

Intermixed terpyridine-functionalized monolayers on gold: nonlinear relationship between terpyridyl density and metal ion coordination properties

Aiming at the functionalization of surfaces with terpyridine anchors for the coordinative deposition of additional layers, mixed self-assembled monolayers (SAMs) were prepared from binary solutions of 12-(2,2':6',2″-terpyridine-4'-yl)dodecane-1-thiol (TDT) and 1-decanethiol (DT). The SAMs and the order of the constituting molecules were analyzed by X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure spectroscopy (NEXAFS), and time-of-flight-secondary ion mass spectrometry (ToF-SIMS). The composition of the (TDT/DT)-SAMs and with it the surface density of terpyridyl groups correlates linearly with the relative concentrations of the two compounds in the solution used for depositing them. In marked contrast, the amount of terpyridine-coordinated Pd(II) ions significantly deviates from this trend with an optimum at a 1:3 ratio of TDT/DT. This indicates a major fraction of the terpyridines in TDT-rich SAMs not to be accessible for Pd(II) ion coordination. In agreement, NEXAFS spectroscopy reveals the alkyl backbones in TDT-rich SAMs not to be ordered, while they are preferentially upright oriented in the optimal 1:3-(TDT/DT)-SAMs. We interpret this in terms of terpyridine backfolding in TDT-rich SAMs, while they are located in accessible positions on top of the SAM in the 1:3-(TDT/DT)-SAM. While the alkyl backbones in the 1:3-(TDT/DT)-SAM are ordered, NEXAFS spectroscopy shows the terpyridyl groups not to have a preferential orientation in this SAM and thus retain enough flexibility to adjust to molecules that are deposited on top of the mixed SAM. In conclusion, the novel SAM does not undergo phase separation and consists predominantly of intermixed phases with adjustable surface density of quite flexible terpyridine anchor groups. The terpyridine-Pd(II) anchors are not only available for a future deposition of the next layer, but the metal ions also represent a sensitive probe for the accessibility of the terpyridyl groups.

Copper-free click biofunctionalization of silicon nitride surfaces via strain-promoted alkyne-azide cycloaddition reactions

Cu-free "click" chemistry is explored on silicon nitride (Si(3)N(4)) surfaces as an effective way for oriented immobilization of biomolecules. An ω-unsaturated ester was grafted onto Si(3)N(4) using UV irradiation. Hydrolysis followed by carbodiimide-mediated activation yielded surface-bound active succinimidyl and pentafluorophenyl ester groups. These reactive surfaces were employed for the attachment of bicyclononyne with an amine spacer, which subsequently enabled room temperature strain-promoted azide-alkyne cycloaddition (SPAAC). This stepwise approach was characterized by means of static water contact angle, X-ray photoelectron spectroscopy, and fluorescence microscopy. The surface-bound SPAAC reaction was studied with both a fluorine-tagged azide and an azide-linked lactose, yielding hydrophobic and bioactive surfaces for which the presence of trace amounts of Cu ions would have been problematic. Additionally, patterning of the Si(3)N(4) surface using this metal-free click reaction with a fluorescent azide is shown. These results demonstrate the ability of the SPAAC as a generic tool for anchoring complex molecules onto a surface under extremely mild, namely ambient and metal-free, conditions in a clean and relatively fast manner.

Surface modification of silicon nanowires via copper-free click chemistry

A two-step process based on copper-free click chemistry is described, by which the surface of silicon nanowires can be functionalized with specific organic substituents. A hydrogen-terminated nanowire surface is first primed with a monolayer of an α,ω-diyne and thereby turned into an alkyne-terminated, clickable platform, which is subsequently coupled with an overlayer of an organic azide carrying the desired terminal functionality. The reactive, electron-deficient character of the employed diyne enabled a quantitative coupling reaction at 50 °C without metal catalysis, which opens up a simple and versatile route for surface functionalization under mild conditions without any potentially harmful additives.