A Ring-Opening Metathesis Polymerization (ROMP) Approach to Carboxyl- and Amino-Terminated Telechelic Poly(butadiene)s

Synthesis of Polyesters Containing Long Aliphatic Methylene Units by ADMET Polymerization and Synthesis of ABA-Triblock Copolymers by One-Pot End Modification and Subsequent Living Ring-Opening Polymerization

The synthesis of high-molecular-weight (Mn up to 62,000 g/mol) polyesters has been achieved by acyclic diene metathesis (ADMET) polymerization of α,ω-dienes prepared from biobased bis(undec-10-enoate) and diols [ethylene glycol (M1), propylene glycol (M2), 1,9-nonanediol (M3), 1,4-benzenedimethanol (M4), and hydroquinone (M5)] using ruthenium-carbene catalysts. Replacement of the solvent during the ADMET polymerization was effective for obtainment of the high-molecular-weight polymers (expressed as P1-P5). The melting temperatures (Tm) in the resultant polyesters were dependent upon the diol (middle) segment employed, and the polymer prepared from M5 exceeded 100 °C (a Tm value of 122.5 °C). The polymerization of M3 and M4 in the presence of 1,4-cis-diacetoxy-2-butene (DAB, as the chain transfer agent) afforded the telechelic polyesters [P3(OAc)2 and P4(OAc)2, respectively] containing acetoxy end groups exclusively. The resultant polymers containing hydroxy group termini [P3(OH)2 and P4(OH)2], prepared by the selective deprotection of the acetoxy end groups, were treated with AlEt3 followed by addition of ε-caprolactone to afford the ABA-type triblock copolymers exclusively, through a living ring-opening polymerization. The depolymerization (hydrolysis) under basic conditions (NaOH aqueous solution) of P3 was explored.

Catalytic Living Ring-Opening Metathesis Polymerization Using Vinyl Ethers as Effective Chain-Transfer Agents

A catalytic living ring-opening metathesis copolymerization (ROMP) method is described that relies on a degenerative, reversible and regioselective exchange of propagating Fischer-carbenes. All characteristics of a living polymerization such as narrow dispersity, excellent molar mass control and the ability to form block copolymers are achieved by this method. The method allows the use of up to 200 times less ruthenium complex than traditional living ROMP. We demonstrate the synthesis of ROMP-ROMP diblock copolymers, ATRP from a ROMP macro-initiator and living ROMP from a PEG-based macro chain transfer agent. The cost-effective, sustainable and environmentally friendly synthesis of degradable polymers and block copolymers enabled by this strategy will find various applications in biomedicine, materials science, and technology.

A Single Functionalization Agent for Heterotelechelic ROMP Polymers

Heterotelechelic polymers are an important class of materials finding applications in bioconjugation, imaging, sensing, and synthesis of organic/inorganic hybrid systems with interesting features. However, the synthesis of such polymers is challenging. Here, we report a mechanistically unique and most efficient method based on a single functionalization agent to prepare heterotelechelic polymers by a ring-opening metathesis polymerization. Different functionalization agents can be synthesized in one simple step from inexpensive commercial starting materials. The functionalization agents initially generate a functional initiator from commercial Grubbs' first-generation ruthenium benzylidene catalyst. During this process, a functional dihydrofuran derivative is produced. After functional initiation and propagation of a suitable monomer, the dihydrofuran derivative functionally terminates the polymerization yielding a primary alcohol-terminated heterotelechelic polymer. Molecular weight control is achieved by varying the ratio between monomer and Grubbs' first-generation catalyst. This method may emerge as a popular choice to prepare heterotelechelic polymers due to its simplicity and efficiency.

Pulsed-Addition ROMP: Catalytic Syntheses of Heterotelechelic Polymers via Regioselective Chain Transfer Agents

Regioselective chain transfer agents are used to synthesize narrowly dispersed heterotelechelic polymers with a 15-fold decrease in catalyst consumption using the pulsed addition ROMP (PA-ROMP) technique. The commercially available Grubbs' third-generation catalyst (G3) is easily prefunctionalized with chain transfer agents in a short reaction time (30 min). After addition and consumption of a monomer, the excess chain transfer agent in the reaction medium end-functionalizes the polymer chain and regenerates the initiator very quickly (within 10 min) via a ring-opening-ring-closing sequence. This regenerated catalyst then initiates the polymerization of a subsequent batch of monomers, and the process is iterated for 15 times. Excellent control over molecular weight and dispersity from SEC analyses (over 15 pulses) confirmed the high efficacy of the chain transfer agents under this PA-ROMP method. The chain transfer agents are also extremely compatible with the synthesis of high molecular weight polymers (M/C = 150) with minimal catalyst decomposition. ¹H NMR as well as MALDI-ToF mass spectrometry further confirmed the high degree of chain end functionalization of the synthesized polymers.

Rapid Synthesis of Elastomers and Thermosets with Tunable Thermomechanical Properties

Rapid, solvent-free synthesis of poly(1,4-butadiene) in ambient conditions is demonstrated by frontal ring-opening metathesis polymerization (FROMP) of 1,5-cyclooctadiene (COD). Furthermore, cross-linked copolymers with a wide range of tunable properties are readily prepared by FROMP of mixtures of COD and dicyclopentadiene (DCPD). Specifically, glass transition temperature and tensile modulus are varied from -90 to 114 °C and 3.1 MPa to 1.9 GPa, respectively, by controlling the comonomer ratio. Copolymers with subambient glass transition temperature exhibit robust elastomeric behavior, with the ability to repeatedly recover from large elastic deformations. As a demonstration of the capability of this manufacturing strategy, gradient materials are fabricated in less than a minute with spatially controlled properties for multistage shape memory actuation. This simple yet powerful manufacturing strategy enables rapid synthesis of copolymers ranging from elastomers to thermosets with precise control over thermomechanical properties.

Enol Ethers Are Effective Monomers for Ring-Opening Metathesis Polymerization: Synthesis of Degradable and Depolymerizable Poly(2,3-dihydrofuran)

Enol ethers are widely used as quenching reagents for Grubbs catalysts. However, we report the surprisingly effective ring-opening metathesis polymerization (ROMP) of cyclic enol ethers, because the resulting electron-rich ruthenium alkylidene complex remains active toward metathesis of electron-rich olefins, despite its deactivation toward hydrocarbon olefins. We demonstrate the first example of ROMP of cyclic enol ethers, using 2,3-dihydrofuran as the monomer, producing a new type of degradable and depolymerizable poly(enol ether). The polymers exhibited perfect regioregularity, and their molecular weights can be regulated by the loading of Grubbs initiators or by the use of a linear vinyl ether as the chain transfer agent. We also developed protocols to deactivate the catalyst following metathesis of enol ethers and cleave the catalyst off the resulting polymers using H₂O₂ oxidation. The resulting poly(dihydrofuran) can be recycled to monomer via depolymerization with Grubbs catalyst or degraded to small molecules by hydrolysis under acidic conditions. This work opens exciting opportunities for a new class of ROMP monomers that lead to degradable polymers.

Pulsed-addition ring-opening metathesis polymerization with functional enyne reagents

Functional enyne reagents enable the synthesis of low dispersity heterotelechelic polymers using catalytic quantities of ruthenium initiator.

Preparation and property investigation of chain end functionalized cis-1,4 polybutadienes via de-polymerization and cross metathesis of cis-1,4 polybutadienes

The end-functional cis-1,4 polybutadiene displayed improved thermal stability and mechanistic properties.

Thermoset elastomers covalently crosslinked by hard nanodomains of triblock copolymers derived from carvomenthide and lactide: tunable strength and hydrolytic degradability

Sustainable, mechanically reinforced, and hydrolytically degradable thermoset elastomers were synthesized by one-pot, three-step synthesis & crosslinking.

α,ω-Epoxide, Oxetane, and Dithiocarbonate Telechelic Copolyolefins: Access by Ring-Opening Metathesis/Cross-Metathesis Polymerization (ROMP/CM) of Cycloolefins in the Presence of Functional Symmetric Chain-Transfer Agents

Epoxide- and oxetane-α,ω-telechelic (co)polyolefins have been successfully synthesized by the tandem ring-opening metathesis polymerization (ROMP)/cross-metathesis (CM) of cyclic olefins using Grubbs' second-generation catalyst (G2) in the presence of a bifunctional symmetric alkene epoxide- or oxetane-functionalized chain-transfer agent (CTA). From cyclooctene (COE), trans,trans,cis-1,5,9-cyclododecatriene (CDT), norbornene (NB), and methyl 5-norbornene-2-carboxylate (NB^COOMe), with bis(oxiran-2-ylmethyl) maleate (CTA 1), bis(oxetane-2-ylmethyl) maleate (CTA 2), or bis(oxetane-2-ylmethyl) (E)-hex-3-enedioate (CTA 3), well-defined α,ω-di(epoxide or oxetane) telechelic PCOEs, P(COE-co-NB or -NB^COOMe)s, and P(NB-co-CDT)s were isolated under mild operating conditions (40 or 60 °C, 24 h). The oxetane CTA 3 and the epoxide CTA 1 were revealed to be significantly more efficient in the CM step than CTA 2, which apparently inhibits the reaction. Quantitative dithiocarbonatation (CS₂/LiBr, 40 °C, THF) of an α,ω-di(epoxide) telechelic P(NB-co-CDT) afforded a convenient approach to the analogous α,ω-bis(dithiocarbonate) telechelic P(NB-co-CDT). The nature of the end-capping function of the epoxide/oxetane/dithiocarbonate telechelic P(NB-co-CDT)s did not impact their thermal signature, as measured by DSC. These copolymers also displayed a low viscosity liquid-like behavior and a shear thinning rheological behavior.

Efficient and Facile End Group Control of Living Ring-Opening Metathesis Polymers via Single Addition of Functional Cyclopropenes

Living ROMP has become an important technique for preparing well-controlled, highly functional polymers; however, installing functional groups at the end of living ROMP polymers is not as straightforward as ROMP itself. We report a simple, efficient strategy to introduce functionalities at the chain end of living polynorbornenes via highly selective single addition of disubstituted 1,1-cyclopropenes (CPEs) with no homopropagation. Unlike many other methods for ROMP chain end functionalization, our method does not result in catalyst termination, allowing for further functionalization after CPE addition. The remarkable reactivity of such CPEs allowed for quantitative chain end functionalization to install a variety of useful functionalities, including halides, aldehydes, ketones, amines, and dyes, without using a large excess of CPEs. These polymer chain ends can be readily modified using a range of postpolymerization modifications.

Rapid, Regioselective Living Ring-Opening Metathesis Polymerization of Bio-Derivable Asymmetric Tricyclic Oxanorbornenes

The synthesis of a range of alkyl esters (methyl, n-butyl, and n-decyl) prepared via Steglich esterification of the thermodynamically controlled exo, exo Diels-Alder adduct of furfuryl alcohol and maleic anhydride is reported. Subsequent ring-opening metathesis polymerization of these bio-derivable tricyclic oxanorbornene analogs delivers polymers with targeted molar mass and low molar mass dispersity. The polymerizations are rapid with complete monomer conversion achieved within 15 min. Significantly, the presence of the cyclic lactone at the bridgehead of these monomers leads to polymers with high regioregularity (>85% head-to-tail) and high stereoregularity (>75% trans). The resultant polymers display both high thermal stability and high glass transition temperatures. This new class of oxanorbornene monomer, accessed from bio-derivable furfuryl alcohol and maleic anhydride, may be further tailored to incorporate a range of functional moieties. Furthermore, the exceptional properties of the derived polymers indicate potential in a range of applications.

Tuning the properties of α,ω-bis(trialkoxysilyl) telechelic copolyolefins from ruthenium-catalyzed chain-transfer ring-opening metathesis polymerization (ROMP)

Low viscosity liquid α,ω-bis(trialkoxysilyl) telechelic copolyolefins are reported.

α,ω-Bis(trialkoxysilyl) difunctionalized polycyclooctenes from ruthenium-catalyzed chain-transfer ring-opening metathesis polymerization

ROMP/CM of COE using bis(trialkoxysilyl)alkenes CTAs and Ru catalysts affords a series of bis(trialkoxysilyl) difunctionalized polyolefins.

Synthesis of phototrappable shape-shifting molecules for adaptive guest binding

We have designed and synthesized oligosubstituted bullvalenes 1 and 2 as adaptive molecules that can change their shapes in order to bind tightly to a suitable guest. By incorporation of a photolabile o-nitroveratryloxycarbonate (NVOC) group into bullvalenes 1 and 2, tightly binding species can be selectively isolated from a population of hundreds of interconverting structural isomers. Spontaneous strain-assisted Cope rearrangements allow these shape-shifting molecules to exist in a dynamic equilibrium of configurationally distinct valence isomers, as revealed by dynamic NMR and HPLC studies. When NVOC bullvalenes 1 and 2 were exposed to UV light, the cleavage of the NVOC group resulted in a mixture of static isomers of the corresponding bullvalone. Binding studies of NVOC bisporphyrin bullvalene 1 demonstrated that the dynamic isomeric equilibrium shifted in the presence of C(60), favoring configurations with more favorable binding affinities. Irradiation of a mixture of 1 and C(60) with UV light and isolation of the major static isomer yielded an isomer of bisporphyrin bullvalone with a binding affinity for C(60) that was ∼2 times larger than that of the nonadapted isomer bisporphyrin bullvalone 41.

Synthesis of a molecular charm bracelet via click cyclization and olefin metathesis clipping

We describe the synthesis of a polycatenated cyclic polymer, a structure that resembles a molecular charm bracelet. Ruthenium-catalyzed ring-opening metathesis polymerization of an amino-containing cyclic olefin monomer in the presence of a chain transfer agent generated an alpha,omega-diazide functionalized polyamine. Cyclization of the resulting linear polyamine using pseudo-high-dilution copper-catalyzed click cyclization produced a cyclic polymer in 19% yield. The click reaction was then further employed to remove linear contaminants from the cyclic polymer using azide- and alkyne-functionalized scavenging resins, and the purified cyclic polymer product was characterized by gel permeation chromatography, (1)H NMR spectroscopy, and IR spectroscopy. Polymer hydrogenation and conversion to the corresponding polyammonium species enabled coordination and interlocking of diolefin polyether fragments around the cyclic polymer backbone using ruthenium-catalyzed ring-closing olefin metathesis to afford a molecular charm bracelet structure. This charm bracelet complex was characterized by (1)H NMR spectroscopy, and the catenated nature of the small rings was confirmed using two-dimensional diffusion-ordered NMR spectroscopy.