AFM Study of Tethered Polystyrene-b-poly(methyl methacrylate) and Polystyrene-b-poly(methyl acrylate) Brushes on Flat Silicate Substrates

Polymer brush-based nanostructures: from surface self-assembly to surface co-assembly

Surface structures play an important role in the practical applications of materials. The synthesis of polymer brushes on a solid surface has emerged as an effective tool for tuning surface properties. The fabrication of polymer brush-based surface nanostructures has greatly facilitated the development of materials with unique surface properties. In this review article, synthetic methods used in the synthesis of polymer brushes, and self-assembly approaches applied in the fabrication of surface nanostructures including self-assembly of polymer brushes, co-assembly of polymer brushes and "free" block copolymer chains, and polymerization induced surface self-assembly, are reviewed. It is demonstrated that polymer brush-based surface nanostructures, including spherical surface micelles, wormlike surface structures, layered structures and surface vesicles, can be fabricated. Meanwhile, the challenges in the synthesis and applications of the surface nanostructures are discussed. This review is expected to be helpful for understanding the principles, methods and applications of polymer brush-based surface nanostructures.

Chemistry and engineering of brush type polymers: Perspective towards tissue engineering

In tissue engineering, it is imperative to control the behaviour of cells/stem cells, such as adhesion, proliferation, propagation, motility, and differentiation for tissue regeneration. Surfaces that allow cells to behave in this way are critical as support materials in tissue engineering. Among these surfaces, brush-type polymers have an important potential for tissue engineering and biomedical applications. Brush structure and length, end groups, bonding densities, hydrophilicity, surface energy, structural flexibility, thermal stability, surface chemical reactivity, rheological and tribological properties, electron and energy transfer ability, cell binding and absorption abilities for various biological molecules of brush-type polymers were increased its importance in tissue engineering applications. In addition, thanks to these functional properties and adjustable surface properties, brush type polymers are used in different high-tech applications such as electronics, sensors, anti-fouling, catalysis, purification and energy etc. This review comprehensively highlights the use of brush-type polymers in tissue engineering applications. Considering the superior properties of brush-type polymer structures, it is believed that in the future, it will be an effective tool in structure designs containing many different biomolecules (enzymes, proteins, etc.) in the field of tissue engineering.

Fabrication of 2D Block Copolymer Brushes via a Polymer-Single-Crystal-Assisted-Grafting-to Method

Block copolymer brushes are of great interest due to their rich phase behavior and value-added properties compared to homopolymer brushes. Traditional synthesis involves grafting-to and grafting-from methods. In this work, a recently developed "polymer-single-crystal-assisted-grafting-to" method is applied for the preparation of block copolymer brushes on flat glass surfaces. Triblock copolymer poly(ethylene oxide)-b-poly(l-lactide)-b-poly(3-(triethoxysilyl)propyl methacrylate) (PEO-b-PLLA-b-PTESPMA) is synthesized with PLLA as the brush morphology-directing component and PTESPMA as the anchoring block. PEO-b-PLLA block copolymer brushes are obtained by chemical grafting of the triblock copolymer single crystals onto a glass surface. The tethering point and overall brush pattern are determined by the single crystal morphology. The grafting density is calculated to be ≈0.36 nm^-2 from the atomic force microscopy results and is consistent with the theoretic calculation based on the PLLA crystalline lattice. This work provides a new strategy to synthesize well-defined block copolymer brushes.

Polymer-functionalized polymer nanoparticles and their behaviour in suspensions

In concentrated suspensions of polymer-functionalized nanoparticles, the softness of the core nanoparticles has a crucial effect on the mechanical behaviour of the resulting colloidal gels.

Distinct Chemical and Physical Properties of Janus Nanosheets

Janus particles have recently garnered significant attention for their distinct properties compared to particles that are homogeneously functionalized. Moreover, high aspect ratio Janus particles that are rod-like or planar (i.e., nanosheets) are especially intriguing considering their interfacial properties as well as their ability to assemble into higher order and hybrid structures. To date, major challenges facing the exploration and utilization of 2D Janus particles are scalability of synthesis, characterization of tailored chemical functionalization, and ability to introduce a diverse set of functionalities. Herein, a facile method to access Janus 2D graphene oxide (GO) nanosheets by combining a Pickering-type emulsion and grafting-from polymerization via ATRP is reported. Janus GO nanosheets bearing PMMA on one face as well as the symmetrically functionalized analogue are prepared, and the chemical, thermal, structural, surface, and interfacial properties of these materials are characterized. Time-of-flight secondary ion mass spectrometry coupled with Langmuir-Blodgett films is shown to be an ideal route to conclusively establish asymmetric functionalization of 2D materials. This work not only provides a facile route for the preparation of Janus nanosheets but also demonstrates the direct visualization of polymer grown from the surface of GO.

Co-assembly of Patchy Polymeric Micelles and Protein Molecules

The development in the synthesis and self-assembly of patchy nanoparticles has resulted in the creation of complex hierarchical structures. Co-assembly of polymeric nanoparticles and protein molecules combines the advantages of polymeric materials and biomolecules, and will produce new functional materials. Co-assembly of positively charged patchy micelles and negatively charged bovine serum albumin (BSA) molecules is investigated. The patchy micelles, which were synthesized using block copolymer brushes as templates, leads to co-assembly with protein molecules into vesicular structures. The average size of the assembled structures can be controlled by the molar ratio of BSA to patchy micelles. The assembled structures are dissociated in the presence of trypsin. The protein-polymer hybrid vesicles could find potential applications in medicine.

Highly grafted polystyrene/polyvinylpyridine polymer gold nanoparticles in a good solvent: effects of chain length and composition

In this work, the structural features of spherical gold nanoparticles (NPs) decorated with highly grafted poly(styrene) (PS), poly(vinylpyridine) (PVP) and PS-PVP diblock copolymer brushes immersed in a good solvent are investigated by means of Dissipative Particle Dynamics (DPD) simulations as a function of grafted chain length and of homopolymer and copolymer chain composition. For NPs grafted either by PS or PVP homopolymer brushes (selected as a proof of concept), good agreement between the Daoud-Cotton theory, experimental evidence, and our DPD simulations is observed in the scaling behavior of single chain properties, especially for longer grafted chains, and in brush thickness prediction. On the other hand, for grafted chain lengths comparable to NP dimensions parabolic-like profiles of the end-monomer distributions are obtained. Furthermore, a region of high concentration of polymer segments is observed in the monomer density distribution for long homopolymers. In the case of copolymer-decorated NPs, the repulsion between PS and PVP blocks is found to substantially influence the radius of gyration and the shape of the end-monomer distribution of the relevant polymer shell. Moreover, for diblock chains, the un-swollen region is observed to be thinner (and, correspondingly, the swollen layer thicker) than that of a NP modified with a homopolymer of the same length. Finally, the lateral segregation of PS and PVP blocks is evidenced by our calculations and a detailed analysis of the corona behavior is reported, thus revealing the key parameters in controlling the surface properties and the response of diblock copolymer modified nanoparticles.

Silica particles with immobilized protein molecules and polymer brushes

In this research thermo-responsive polymer brushes and protein molecules are immobilized on the surfaces of silica particles by covalent bonds. Pyridyl disulfide functionalized silica particles are prepared by surface chemical reactions, and thiol-terminated poly(oligo(ethylene glycol) monomethyl ether methacrylate) (POEGMA) and bovine serum albumin (BSA) molecules are grafted to the silica particles by thiol-disulfide exchange reactions. X-ray photoelectron spectroscopy, thermogravimetric analysis, dynamic light scattering, confocal laser scanning microscopy, far-UV circular dichroism and transmission electron microscopy are employed to characterize the polymer/protein mixed layers on silica particles. The POEGMA brushes not only protect the protein molecules but also improve the dispersibility of the hybrid particles in aqueous solution. The activity of the immobilized BSA protein can be controlled by the thermo-responsive POEGMA brushes. At a temperature below the lower critical solution temperature (LCST) of POEGMA, BSA activity is not affected by polymer brushes; however, BSA activity decreases significantly at a temperature above the LCST of POEGMA.

STATEMENT OF SIGNIFICANCE

In this research, both protein molecules and polymer brushes were anchored to the silica particles by highly efficient thiol-disulfide exchange reaction, and their grafting density can easily be determined by UV-vis. Owing to the temperature-sensitive nature of the grafted polymer brushes, the protein molecules can be protected by the collapsed polymer brushes above the LCST, and their catalytic activity can be controlled. Moreover, the protein molecules on silica particles can be easily separated from the solution and can be reused.

Patchy micelles based on coassembly of block copolymer chains and block copolymer brushes on silica particles

Patchy particles are a type of colloidal particles with one or more well-defined patches on the surfaces. The patchy particles with multiple compositions and functionalities have found wide applications from the fundamental studies to practical uses. In this research patchy micelles with thiol groups in the patches were prepared based on coassembly of free block copolymer chains and block copolymer brushes on silica particles. Thiol-terminated and cyanoisopropyl-capped polystyrene-block-poly(N-isopropylacrylamide) block copolymers (PS-b-PNIPAM-SH and PS-b-PNIPAM-CIP) were synthesized by reversible addition-fragmentation chain transfer polymerization and chemical modifications. Pyridyl disulfide-functionalized silica particles (SiO2-SS-Py) were prepared by four-step surface chemical reactions. PS-b-PNIPAM brushes on silica particles were prepared by thiol-disulfide exchange reaction between PS-b-PNIPAM-SH and SiO2-SS-Py. Surface micelles on silica particles were prepared by coassembly of PS-b-PNIPAM-CIP and block copolymer brushes. Upon cleavage of the surface micelles from silica particles, patchy micelles with thiol groups in the patches were obtained. Dynamic light scattering, transmission electron microscopy, and zeta-potential measurements demonstrate the preparation of patchy micelles. Gold nanoparticles can be anchored onto the patchy micelles through S-Au bonds, and asymmetric hybrid structures are formed. The thiol groups can be oxidized to disulfides, which results in directional assembly of the patchy micelles. The self-assembly behavior of the patchy micelles was studied experimentally and by computer simulation.

Cleavage of diblock copolymer brushes in a selective solvent and fusion of vesicles self-assembled by pinned micelles

Lipid membrane fusion is a fundamental process in nature. In the fusion process two distinct bilayers merge the hydrophobic layers, and an interconnected structure is produced. In this research, the fusion of polymer membrane self-assembled by cleaved pinned micelles is investigated. Disulfide-tethered poly(tert-butyl acrylate-block-styrene) diblock copolymer brushes on the surfaces of silica particles were prepared by the "grafting to" or "grafting from" method. In acetone, the diblock copolymer brushes self-assemble into pinned micelles. Upon cleavage from the surfaces of the silica particles with n-tributylphosphine, the pinned micelles self-assemble into vesicles. In the meanwhile, thiol groups at the ends of the block copolymer brushes were produced in the cleavage reaction. Because of the oxidation of the thiol groups and the formation of the disulfide bonds, the vesicle structures are fused into bigger hollow structures and fiber-like structures. The further fusion of the fiber-like structures results in precipitation of the polymer from the solution.

Control interfacial properties and tensile strength of glass fibre/PP composites by grafting poly(ethylene glycol) chains on glass fibre surface

The interfacial adhesion increased as the grafted PEG chains became longer.

Perpendicular orientation of sub-10 nm channels in polystyrene-b-poly(4-hydroxyl styrene)/PEG oligomer blend thin films

Vertically oriented cylinders via the directional coalescence of the spheres embedded in the blend thin films from polystyrene-b-poly(4-hydroxyl styrene) (PS-b-PHS) and PEG induced by solvent annealing were achieved. Removal of PEG water led to the formation of nanochannels throughout the films. The diameter of these channels could be as small as 9 nm which might enhance the applicability of the nano-porous films as size-selective membranes and controllable drug delivery systems for the objects less than 10 nm.

Surface treatment of polymeric materials controlling the adhesion of biomolecules

This review describes different strategies of surface elaboration for a better control of biomolecule adsorption. After a brief description of the fundamental interactions between surfaces and biomolecules, various routes of surface elaboration are presented dealing with the attachment of functional groups mostly thanks to plasma techniques, with the grafting to and from methods, and with the adsorption of surfactants. The grafting of stimuli-responsive polymers is also pointed out. Then, the discussion is focused on the protein adsorption phenomena showing how their interactions with solid surfaces are complex. The adsorption mechanism is proved to be dependent on the solid surface physicochemical properties as well as on the surface and conformation properties of the proteins. Different behaviors are also reported for complex multiple protein solutions.

Chemical patterns from surface grafted resists for directed assembly of block copolymers

We demonstrate a direct e-beam patternable one-component block copolymer (BCP) resist to fabricate a chemical pattern for the directed assembly of a symmetric block copolymer. The resist consists of a low molecular weight poly(styrene-block-methyl methacrylate) with a hydroxyl group at the PMMA chain end (PS-b-PMMA-OH), which anchors the chains to the surface. This short-tethered PMMA block provided sufficient sensitivity to allow scission by e-beam. The length of the untethered PS block was fine-tuned to impart the required contrast between the patterned and the unpatterned region for 1:1 assembly of an overlying BCP blend. Two BCP resists with a PS fraction of 0.25 (16SM) and 0.34 (18SM), with a total molecular weight less than 20K, were synthesized, and the assembly of a ternary BCP blend was studied. 16SM- and 18SM-anchored substrates showed nonpreferential and PS preferential surfaces, respectively. Both 18SM and 16SM could be patterned by e-beam to fabricate a 1:1 chemical pattern with a line pitch of 70 nm for the assembly of a BCP ternary blend. 18SM gave fewer defects than 16SM due to an increased contrast in interfacial energies between adjacent stripes in the chemical surface pattern. Two additional PS-b-PMMA-OH polymers with a molecular weight of 39K (F(PS) = 0.76) and 69K (F(PS) = 0.83) were synthesized to study the effect of PS cross-linking upon exposure to e-beam. As the PS fraction increases, the line pattern becomes blurred and ultimately ineffective in guiding the BCP assembly. The blurring is attributed to cross-linking of adjacent PS chains.

Synthesis and morphological study of thick benzyl methacrylate-styrene diblock copolymer brushes

We demonstrate, for the first time, the synthesis of model poly(benzyl methacrylate) [P(BnMA)] brushes of very high thickness (>300 nm) on silicon wafer. P(BnMA) brush is also synthesized from the surface of silica nanoparticles, from a covalently anchored initiator monolayer, using ambient temperature ATRP. The kinetic studies and block copolymerization from the surface anchored P(BnMA)-Br macroinitiator showed that the polymerization was controlled in nature. AFM, ellipsometry, and water contact angle were used for the characterization of the polymer brush. The grafting density of the P(BnMA) brush, formed by immersion in a dilute monomer solution, was relatively less (∼11% less) in comparison to that obtained by immersion in neat monomer under similar conditions. The P(BnMA)-Br macroinitiator brushes were used to synthesize P(BnMA-b-S) diblock copolymer brushes by the ATRP of styrene at 95 °C. The P(BnMA-b-S) brushes showed stimulus response to a selective solvent and various nanopatterns were observed according to the composition of the block copolymer.

Elaboration of nano-structured grafted polymeric surface

The surface grafting of multi-polymeric materials can be achieved by grafting as components such as polymers poly(N-isopropylacrylamide) and/or surfactant molecules (hexatrimethylammonium bromide, polyoxyethylene sorbitan monolaurate). The chosen grafting techniques, i.e. plasma activation followed by coating, allow a large spectrum of functional groups that can be inserted on the surface controlling the surface properties like adhesion, wettability and biocompatibility. The grafted polypropylene surfaces were characterized by contact angle analyses, XPS and AFM analyses. The influence of He plasma activation, of the coating parameters such as concentrations of the various reactive agents are discussed in terms of hydrophilic character, chemical composition and morphologic surface heterogeneity. The plasma pre-activation was shown inevitable for a permanent polymeric grafting. PNIPAM was grafted alone or with a mixture of the surfactant molecules. Depending on the individual proportion of each component, the grafted surfaces are shown homogeneous or composed of small domains of one component leading to a nano-structuration of the grafted surface.

Stimuli-responsive binary mixed polymer brushes and free-standing films by LbL-SIP

We report a facile approach to preparing binary mixed polymer brushes and free-standing films by combining the layer-by-layer and surface-initiated polymerization (LbL-SIP) techniques. Specifically, the grafting of mixed polymer brushes of poly(n-isopropylacrylamide) and polystyrene (pNIPAM-pSt) onto LbL-macroinitiator-modified planar substrates is described. Atom transfer radical polymerization (ATRP) and free radical polymerization (FRP) techniques were employed for the syntheses of pNIPAM and pSt, respectively, yielding pNIPAM-pSt mixed polymer brushes. The composition of the two polymers was controlled by varying the number of macroinitiator layers deposited on the substrate (i.e., LbL layers = 4, 8, 12, 16, and 20); consequently, mixed brushes of different thicknesses and composition ratios were obtained. Moreover, the switching behavior of the LbL-mixed brush films as a function of solvent and temperature was demonstrated and evaluated by water contact angle and atomic force microscopy (AFM) experiments. It was found that both the solvent and temperature stimuli responses were a function of the mixed brush composition and thickness ratio where the dominant component played a larger role in the response behavior. Furthermore, the ability to obtain free-standing films was exploited. The LbL technique provided the macroinitiator density variation necessary for the preparation of stable free-standing mixed brush films. Specifically, the free-standing films exhibited the rigidity to withstand changes in the solvent and temperature environment and at the same time were flexible enough to respond accordingly to external stimuli.

Memory effects of diblock copolymer brushes and mixed brushes

Memory effects of microphase segregation in diblock copolymer brushes and binary mixed homopolymer brushes exposed to solvents of different quality and selectivity are studied using Single-Chain-in-Mean-Field (SCMF) simulations. We gauge these memory effects by a fluctuation memory measure, reflecting the correlation between the quenched fluctuations of grafting points and the microphase-separated morphology, and a domain memory measure, quantifying the correlation between surface morphologies during cyclic exposure to different solvents. The fluctuation and domain memory measures are closely correlated, and both of them have their root in the broken translational symmetry of the distribution of grafting points. They become stronger upon increasing the fluctuations of the grafting points. The effects of solvent quality and selectivity, grafting density, and composition of brushes on the memory measures are discussed.