Surface-Initiated Polymerization of l-Lactide: Coating of Solid Substrates with a Biodegradable Polymer

On the Road to Circular Polymer Brushes: Challenges and Prospects

Polymer brushes are unique surface coatings that have been of high interest in research for the past decades due to their covalent tethering to surfaces and the broad spectrum of polymers that can be grafted to or grafted from various surfaces. Modification of surfaces with brushes may provide lubricious and/or antifouling properties, and they can also potentially be used in many application fields due to their high responsiveness toward certain stimuli. Generally, polymer brushes are long-lasting coatings, while their end-of-life has to date largely been neglected. Therefore, it is important to consider additional design methodologies to produce circular brushes, which will degrade after a certain period of time such that surfaces can be reused, and the potentially obtained monomers may be used again to synthesize new brushes. In this Perspective, we aim to tackle and understand the challenges to translate the knowledge on degradation and chemical recycling of bulk polymers toward circular polymer brushes. We summarized the recent developments on (bio)degradable polymer brushes and the challenges that are to be tackled toward their potential implementation as circular coatings.

Green Solvent-Based Antifouling Polymer Brushes Demonstrate Excellent Hemocompatibility

Medical devices are crucial for patient care, yet even the best biomaterials lead to infections and unwanted activation of blood coagulation, potentially being life-threatening. While hydrophilic polymer brushes are the best coatings to mitigate these issues, their reliance on fossil raw materials underscores the urgency of bio-based alternatives. In this work, we introduce polymer brushes of a green solvent-based monomer, prohibiting protein adsorption, bacterial colonization, and blood clot formation at the same level as fossil-based polymer brushes. The polymer brushes are composed of N,N-dimethyl lactamide acrylate (DMLA), can be polymerized in a controlled manner, and show strong hydrophilicity as determined by thermodynamic analysis of the surface tension components. The contact of various challenging protein solutions results in repellency on the poly(DMLA) brushes. Furthermore, the poly(DMLA) brushes completely prevent the adhesion and colonization of Escherichia coli. Remarkably, upon blood contact, the poly(DMLA) brushes successfully prevent the formation of a fibrin network and leukocyte adhesion on the surface. While showcasing excellent antifouling properties similar to those of N-hydroxypropyl methacrylamide (HPMA) polymer brushes as one of the best antifouling coatings, the absence of hydroxyl groups prevents activation of the complement system in blood. We envision the polymer brushes to contribute to the future of hemocompatible coatings.

Polymethylene Brushes via Surface-Initiated C1 Polyhomologation

Surface-initiated polymerization reactions are a powerful tool to generate chain-end-tethered polymer brushes. This report presents a synthetic strategy that gives access to structurally well-defined hydrocarbon polymer brushes of controlled molecular weights, which can be further modified to generate more complex surface-attached polymer architectures. The hydrocarbon brushes reported in this study are polymethylene brushes that are obtained via surface-initiated C1 polyhomologation of dimethylsulfoxonium methylide. The strategy outlined here is based on the use of an alkylboronic acid pinacol ester initiator, which allows for controlled, unidirectional chain growth by monomer insertion into only the C-B bond of the initiator and which presents the polymerization active group at the growing polymer chain end. This surface-initiated C1 polyhomologation methodology is compatible with photopatterning strategies and can be used to generate micropatterned polymethylene brush films. Furthermore, conversion of the boronic ester chain-end functionalities to hydroxyl groups allows for selective chain-end modification and enables access to a variety of surface-anchored block copolymer architectures by chain extension via, for example, ring-opening or atom transfer radical polymerization chemistries.

Creation of a PDMS Polymer Brush on SiO2-Based Nanoparticles by Surface-Initiated Ring-Opening Polymerization

The incorporation of nanoparticles into soft matrices opens a broad spectrum of novel property combinations. However, one of the major challenges for these systems remains the compatibilization of particles with the surrounding matrix by proper surface functionalization. For silicon-based systems or liquid crystalline phases, polydimethylsiloxane (PDMS) brushes at the surface of particles increase the stability against particle agglomeration in such systems. Here, we report a novel approach for the functionalization of particles with a polysiloxane brush by surface-initiated ring-opening polymerization of a cyclosiloxane. For this purpose, surface hydroxy groups of silica and silica-coated hematite particles are used as initiators in combination with phosphazene bases as catalysts. The ring-chain equilibrium of a model-based solution polymerization is investigated in detail to find the appropriate reaction parameters. The corresponding molar masses are determined and compared by ¹H-NMR and SEC measurements to confirm the underlying mechanism. In the resulting hybrid nanostructures, a covalently bound PDMS fraction is achieved up to 47 mass %.

A degradable polydopamine coating based on disulfide-exchange reaction

Although the programmed degradation of biocompatible films finds applications in various fields including biomedical and bionanotechnological areas, coating methods have generally been limited to be substrate-specific, not applicable to any kinds of substrates. In this paper, we report a dopamine derivative, which allows for both universal coating of various substrates and stimuli-responsive film degradation, inspired by mussel-adhesive proteins. Two dopamine moieties are linked together by the disulfide bond, the cleavage of which enables the programmed film degradation. Mechanistic analysis of the degradable films indicates that the initial cleavage of the disulfide linkage causes rapid uptake of water molecules, hydrating the films, which leads to rapid degradation. Our substrate-independent coating of degradable films provides an advanced tool for drug delivery systems, tissue engineering, and anti-fouling strategies.

Polyelectrolyte brushes: theory, modelling, synthesis and applications

Polyelectrolyte (PE) brushes are a special class of polymer brushes (PBs) containing charges. Polymer chains attain "brush"-like configuration when they are grafted or get localized at an interface (solid-fluid or liquid-fluid) with sufficiently close proximity between two-adjacent grafted polymer chains - such a proximity triggers a particular nature of interaction between the adjacent polymer molecules forcing them to stretch orthogonally to the grafting interface, instead of random-coil arrangement. In this review, we discuss the theory, synthesis, and applications of PE brushes. The theoretical discussion starts with the standard scaling concepts for polymer and PE brushes; following that, we shed light on the state of the art in continuum modelling approaches for polymer and PE brushes directed towards analysis beyond the scaling calculations. A special emphasis is laid in pinpointing the cases for which the PE electrostatic effects can be de-coupled from the PE entropic and excluded volume effects; such de-coupling is necessary to appropriately probe the complicated electrostatic effects arising from pH-dependent charging of the PE brushes and the use of these effects for driving liquid and ion transport at the interfaces covered with PE brushes. We also discuss the atomistic simulation approaches for polymer and PE brushes. Next we provide a detailed review of the existing approaches for the synthesis of polymer and PE brushes on interfaces, nanoparticles, and nanochannels, including mixed brushes and patterned brushes. Finally, we discuss some of the possible applications and future developments of polymer and PE brushes grafted on a variety of interfaces.

Degradable Polycaprolactone and Polylactide Homopolymer and Block Copolymer Brushes Prepared by Surface-Initiated Polymerization with Triazabicyclodecene and Zirconium Catalysts

Surface-initiated ring-opening polymerization (SI-ROP) of polycaprolactone (PCL) and polylactide (PLA) polymer brushes with controlled degradation rates were prepared on oxide substrates. PCL brushes were polymerized from hydroxyl-terminated monolayers utilizing triazabicyclodecene (TBD) as the polymerization catalyst. A consistent brush thickness of 40 nm could be achieved with a reproducible unique crystalline morphology. The organocatalyzed PCL brushes were chain extended using lactide in the presence of zirconium n-butoxide to successfully grow PCL/PLA block copolymer (PCL-b-PLA) brushes with a final thickness of 55 nm. The degradation properties of "grafted from" PCL brush and the PCL-b-PLA brush were compared to "grafted to" PCL brushes, and we observed that the brush density plays a major role in degradation kinetics. Solutions of methanol/water at pH 14 were used to better solvate the brushes and increase the kinetics of degradation. This framework enables a control of degradation that allows for the precise removal of these coatings.

Crack prevention of biodegradable polymer coating on metal facilitated by a nano-coupled interlayer

Crack prevention of biodegradable polymer coatings on drug-eluting stents was investigated by introducing a nano-coupled layer at the interface between the metal surface and the polymer coating layer using surface-initiated ring-opening polymerization of ε-caprolactone. Poly(d,l-lactide-co-glycolide) coating on cobalt-chromium control and ricinoleic acid-poly(caprolactone)–grafted cobalt-chromium was carried out using electrospraying. The cracking of the biodegradable polymer coating on drug-eluting stents during ballooning was addressed by introducing a nano-coupled interlayer on the cobalt-chromium surface. The ricinoleic acid-poly(caprolactone) nano-coupled interlayer and poly(d,l-lactide-co-glycolide)-coated top layer were characterized using attenuated total reflection Fourier transform infrared, contact angle, ellipsometry, X-ray photoelectron spectroscopy, and atomic force microscopy. Based on scratch tests, the nano-coupled samples had stronger interfacial adhesion compared to the control sample without the nano-coupled layer. Scanning electron microscope images indicated that the cracking on the poly(d,l-lactide-co-glycolide) coating was addressed. Introducing a nano-coupling interlayer may be an important strategy to preventing polymer coating cracking on drug-eluting stents.

Controlled drug delivery from composites of nanostructured porous silicon and poly(L-lactide)

AIMS

Porous silicon (pSi) and poly(L-lactide) (PLLA) both display good biocompatibility and tunable degradation behavior, suggesting that composites of both materials are suitable candidates as biomaterials for localized drug delivery into the human body. The combination of a pliable and soft polymeric material with a hard inorganic porous material of high drug loading capacity may engender improved control over degradation and drug release profiles and be beneficial for the preparation of advanced drug delivery devices and biodegradable implants or scaffolds.

MATERIALS & METHODS

In this work, three different pSi and PLLA composite formats were prepared. The first format involved grafting PLLA from pSi films via surface-initiated ring-opening polymerization (pSi-PLLA [grafted]). The second format involved spin coating a PLLA solution onto oxidized pSi films (pSi-PLLA [spin-coated]) and the third format consisted of a melt-cast PLLA monolith containing dispersed pSi microparticles (pSi-PLLA [monoliths]). The surface characterization of these composites was performed via infrared spectroscopy, scanning electron microscopy, atomic force microscopy and water contact angle measurements. The composite materials were loaded with a model cytotoxic drug, camptothecin (CPT). Drug release from the composites was monitored via fluorimetry and the release profiles of CPT showed distinct characteristics for each of the composites studied.

RESULTS

In some cases, controlled CPT release was observed for more than 5 days. The PLLA spin coat on pSi and the PLLA monolith containing pSi microparticles both released a CPT payload in accordance with the Higuchi and Ritger-Peppas release models. Composite materials were also brought into contact with human lens epithelial cells to determine the extent of cytotoxicity.

CONCLUSION

We observed that all the CPT containing materials were highly efficient at releasing bioactive CPT, based on the cytotoxicity data.

Improvement of interfacial adhesion of biodegradable polymers coated on metal surface by nanocoupling

A method of securing the adhesion of biodegradable polymer coating was investigated for drug-eluting metal stents, using surface-initiated ring-opening polymerization (SI-ROP) of L-lactide. Introduction of oligolactide on the stainless steel (SS) surface was successful and the thickness of the oligolactide grafts remained on the nanometer scale, as determined by ellipsometry. The presence of an oligolactide graft was also identified using attenuated total reflection-Fourier transform infrared (ATR-FTIR) and electron spectroscopy for chemical analysis (ESCA). On top of the grafts, poly(D,L-lactide-co-glycolide) (PLGA) coating was carried out on different substrates such as SS control, plasma-treated SS, and lactide-grafted (referred to as a nanocoupled) SS using electrospraying. When the adhesion forces were measured with a scratch tester, the nanocoupled SS showed the strongest interfacial adhesion between polymer coating layer and metal substrate. The outcome of the peel-off test was also consistent with the result of the scratch test. When degradation behavior of the polymer coating in vitro was examined for up to 4 weeks in a continuous fluid flow, the SEM images demonstrated that polymer degradation was obvious due to hydration and swelling of the polymer matrix. Although the matrix completely disappeared after 4 weeks for SS control and plasma-treated substrates, the nanocoupled SS was persistent with some polymer matrix. In addition, the release profiles of SRL-loaded PLGA coating appeared slightly different between control and nanocoupled groups. This work suggested that the concept of nanocoupling remarkably improved the interfacial adhesion stability between metal surface and polymer layer and controlled drug release, and showed the feasibility of drug-eluting stents.

Colloidal stability of oleic- and ricinoleic-acid-coated magnetic nanoparticles in organic solvents

The colloidal stability of oleic- and ricinoleic-acid-coated nanoparticles in organic solvents with dielectric constants ε(r) ranging from 2.0 to 9.8 was studied. Although the acids are structurally similar, there is an OH group in the ricinoleic acid's tail, a marked improvement in the colloidal stability of the ricinoleic-acid-coated magnetic nanoparticles in moderately polar organic solvents and monomer methyl methacrylate was observed as a result. The bonding of both acids provokes a significant change in the surface properties of the iron-oxide nanoparticles. A clear shift from a strong electron-donor to a weak electron-donor was confirmed with the bonding of the oleic acid. The effect of ricinoleic acid bonding is even more dramatic: a clear shift toward a weak electron-acceptor is evident. A detailed analysis of the total energy of interaction, including the vOCG theory, between two particles was used to describe the different behaviors of the coated nanoparticles. In the case of the oleic acid nanoparticles in an apolar medium, such as decane, a small net attraction of ∼0.84k(B)T, which is insufficient to cause nanoparticles agglomeration, exists. In polar media the net attraction is larger than 1.5k(B)T, resulting in precipitation of the oleic-acid-coated nanoparticles. The same findings apply to the ricinoleic-acid-coated nanoparticles, but only when dispersed in the apolar medium. In the polar medium an additional repulsion due to polar solvation forces exists, resulting in a decrease of the net attraction to as low as ∼0.14k(B)T.

Norepinephrine: material-independent, multifunctional surface modification reagent

A facile approach for material-independent surface modification using norepinephrine was investigated. pH-induced oxidative polymerization of norepinephrine forms adherent films on vastly different types of material surfaces of noble metals, metal oxides, semiconductors, ceramics, shape-memory alloys, and synthetic polymers. Secondary biochemical functionalizations such as immobilization of proteins and growth of biodegradable polyester on the poly(norepinephrine) films were demonstrated.

Applications of polymer brushes in protein analysis and purification

This review examines the application of polymer brush-modified flat surfaces, membranes, and beads for protein immobilization and isolation. Modification of porous substrates with brushes yields membranes that selectively bind tagged proteins to give 99% pure protein at capacities as high as 100 mg of protein per cubic centimeter of membrane. Moreover, enrichment of phosphopeptides on brush-modified matrix-assisted laser desorption/ionization (MALDI) plates allows detection and characterization of femtomole levels of phosphopeptides by MALDI mass spectrometry. Because swollen hydrophilic brushes can resist nonspecific protein adsorption while immobilizing a high density of proteins, they are attractive as substrates for protein microarrays. This review highlights the advantages of polymer brush-modified surfaces over self-assembled monolayers and identifies some research needs in this area.

Combination of different chemical surface reactions for the fabrication of chemically versatile building blocks onto silicon surfaces

The use of nucleophilic displacement reactions on bromine-terminated monolayers is presented to create new functional moieties onto silicon surfaces. Functional amines were used as suitable nucleophiles to introduce versatile building blocks onto self-assembled monolayers to perform further surface chemistry toward the fabrication of surfaces with designed properties by combining compatible chemical routes. These modified substrates were analyzed by suitable surface sensitive techniques. Furthermore, the functional monolayers were used for different postmodification reactions. For example, functional amines facilitated with acetylene groups were applied in the click chemistry approach. The use of amino-functionalized terpyridine units leads to the construction of supramolecular systems, where the choice of the metal monocomplex for the complexation is important for the tuning of the surface properties.

Surface treatment and characterization: Perspectives to electrophoresis and lab-on-chips

The control and modification of surface state is a major challenge in bioanalytical sciences, and in particular in electrokinetic separation methods, due to the importance of electroosmosis. This topic has gained recently a renewed interest, associated with the development of "lab-on-chips" systems that extend the range of materials in which separation channels are fabricated. The surface science community has developed through the years a large toolbox of characterization tools and surface modification protocols, which is not yet fully exploited in the bioanalytical world. In this paper, we try and present an overview of these tools, in order to stimulate new ideas for improved and more controlled surface treatment strategies for separations in capillaries and microchannels. We briefly describe some physical and chemical aspects of electroosmosis (global and spatially resolved), streaming current, and streaming potential. We also review the main strategies for surface coating, and compare the advantages of physisorption, well-organized thin self-assembled monolayers, or conversely thick polymer "brushes". Examples of existing applications to electrophoresis in microchannel are also given.