Synthesis of Biocompatible Polymers. 1. Homopolymerization of 2-Methacryloyloxyethyl Phosphorylcholine via ATRP in Protic Solvents: An Optimization Study

An Antidehydration Hydrogel Based on Zwitterionic Oligomers for Bioelectronic Interfacing

Hydrogels are ideal interfacing materials for on-skin healthcare devices, yet their susceptibility to dehydration hinders their practical use. While incorporating hygroscopic metal salts can prevent dehydration and maintain ionic conductivity, concerns arise regarding metal toxicity due to the passage of small ions through the skin barrier. Herein, an antidehydration hydrogel enabled by the incorporation of zwitterionic oligomers into its network is reported. This hydrogel exhibits exceptional water retention properties, maintaining ≈88% of its weight at 40% relative humidity, 25 °C for 50 days and about 84% after being heated at 50 °C for 3 h. Crucially, the molecular weight design of the embedded oligomers prevents their penetration into the epidermis, as evidenced by experimental and molecular simulation results. The hydrogel allows stable signal acquisition in electrophysiological monitoring of humans and plants under low-humidity conditions. This research provides a promising strategy for the development of epidermis-safe and biocompatible antidehydration hydrogel interfaces for on-skin devices.

Rapid RAFT Polymerization of Acrylamide with High Conversion

Rapid RAFT polymerization can significantly improve production efficiency of PAM with designed molecular structure. This study shows that ideal Reversible Addition–Fragmentation Chain Transfer (RAFT) polymerization of acrylamide is achieved in dimethyl sulfoxide (DMSO) solution at 70 °C. The key to success is the appropriate choice of both a suitable RAFT chain transfer agent (CTA) and initiating species. It is illustrated that dodecyl trithiodimethyl propionic acid (DMPA) is a suitable trithiocarbonate RAFT CTA and is synthesized more easily than other CTAs. Compared to other RAFT processes of polymers, the reaction system shortens reaction time, enhances conversion, and bears all the characteristics of a controlled radical polymerization. The calculation result shows that high concentrations can reduce high conversions, accelerate the reaction rate, and widen molecular weight distributions slightly. This work proposes an excellent approach for rapid synthesis of PAMs with a restricted molecular weight distribution.

Biomimetic materials based on zwitterionic polymers toward human-friendly medical devices

This review summarizes recent research on the design of polymer material systems based on biomimetic concepts and reports on the medical devices that implement these systems. Biomolecules such as proteins, nucleic acids, and phospholipids, present in living organisms, play important roles in biological activities. These molecules are characterized by heterogenic nature with hydrophilicity and hydrophobicity, and a balance of positive and negative charges, which provide unique reaction fields, interfaces, and functionality. Incorporating these molecules into artificial systems is expected to advance material science considerably. This approach to material design is exceptionally practical for medical devices that are in contact with living organisms. Here, it is focused on zwitterionic polymers with intramolecularly balanced charges and introduce examples of their applications in medical devices. Their unique properties make these polymers potential surface modification materials to enhance the performance and safety of conventional medical devices. This review discusses these devices; moreover, new surface technologies have been summarized for developing human-friendly medical devices using zwitterionic polymers in the cardiovascular, cerebrovascular, orthopedic, and ophthalmology fields.

pH-Responsive Association Behavior of Biocompatible Random Copolymers Containing Pendent Phosphorylcholine and Fatty Acid

Well-defined pH-responsive biocompatible random copolymers composed of 2-(methacryloyloxy)ethyl phosphorylcholine and varying quantities of sodium 11-(acrylamido)undecanoate (AaU) (f_AaU = 0-58 mol %) were synthesized via reversible addition-fragmentation chain transfer radical polymerization. The pH-responsive association and dissociation behavior of the random copolymers was studied via turbidity, ¹H nuclear magnetic resonance relaxation time, dynamic light scattering, static light scattering (SLS), and fluorescence measurements. At basic pH levels, the random copolymers dissolved in water in a unimer state because the AaU units behaved in a hydrophilic manner as a result of the ionization of the pendent fatty acids. The random copolymers with f_AaU < 52 mol % associated intramolecularly within a single polymer chain to form unimer micelles at pH 3 because of the protonation of the pendent fatty acids. On the other hand, the random copolymer with f_AaU ≥ 52 mol % formed intermolecular aggregates composed of four polymer chains at pH 3, as established by the SLS measurements. The random copolymers displayed the ability to solubilize hydrophobic guest molecules, such as N-phenyl-1-naphthylamine, into the hydrophobic microdomain formed by the pendent dehydrated fatty acids at acidic pHs. At pH 4, 1-pyrememethanol is captured by the random copolymer with f_AaU = 52 mol %, and it is released from the random copolymer above pH 9. Furthermore, the mucoadhesive properties of the random copolymer with f_AaU = 9 mol % were studied using a surface plasmon resonance technique. The copolymer was adsorbed onto mucin at pH 3; however, the adsorption decreased at pH 7.4.

Emerging Phospholipid Nanobiomaterials for Biomedical Applications to Lab-on-a-Chip, Drug Delivery, and Cellular Engineering

The design of advanced nanobiomaterials to improve analytical accuracy and therapeutic efficacy has become an important prerequisite for the development of innovative nanomedicines. Recently, phospholipid nanobiomaterials including 2-methacryloyloxyethyl phosphorylcholine (MPC) have attracted great attention with remarkable characteristics such as resistance to nonspecific protein adsorption and cell adhesion for various biomedical applications. Despite many recent reports, there is a lack of comprehensive review on the phospholipid nanobiomaterials from synthesis to diagnostic and therapeutic applications. Here, we review the synthesis and characterization of phospholipid nanobiomaterials focusing on MPC polymers and highlight their attractive potentials for applications in micro/nanofabricated fluidic devices, biosensors, lab-on-a-chip, drug delivery systems (DDSs), COVID-19 potential usages for early diagnosis and even treatment, and artificial extracellular matrix scaffolds for cellular engineering.

Convergent charge interval spacing of zwitterionic 4-vinylpyridine carboxybetaine structures for superior blood-inert regulation in amphiphilic phases

Antifouling materials are indispensable in the biomedical field, but their high hydrophilicity and surface free energy provoke contamination on surfaces under atmospheric conditions, thus limiting their applicability in medical devices. This study proposes a new zwitterionic structure, 4-vinylpyridine carboxybetaine (4VPCB), that results in lower surface free energy and increases biological inertness. In the design of 4VPCB, one to three carbon atoms are inserted between the positive charge and negative charge (carbon space length, CSL) of the pyridyl-containing side chain to adjust hydration with water molecules. The pyridine in the 4VPCB structure provides the hydrophobicity of the zwitterionic functional group, and thus it can have a lower free energy in the gas phase but maintain higher hydrophilicity in the liquid phase environment. Surface plasmon resonance and confocal microscopy were used to analyze the antiprotein adsorption and anti-blood cell adhesion properties of the P4VPCB brush surface. The results showed that the CSL in the P4VPCB structure affected the biological inertness of the surface. The protein adsorption on the surface of P4VPCB2 (CSL= 2) is lower than that on the surfaces of P4VPCB1 (CSL = 1) and P4VPCB3 (CSL = 3), and the optimal resistance to protein adsorption can be reduced to 7.5 ng cm^-2. The surface of P4VPCB2 can also exhibit excellent blood-inert function in the adhesion test with various human blood cells, offering a potential possibility for the future design of a new generation of blood-inert medical materials.

Antifouling silicone hydrogel contact lenses via densely grafted phosphorylcholine polymers

Silicone hydrogel contact lenses (CLs) permit increased oxygen permeability through their incorporation of siloxane functional groups. However, contact lens biofouling can be problematic with these materials; surface modification to increase lens compatibility is necessary for acceptable properties. This work focuses on the creation of an antifouling CL surface through a novel grafting method. A polymer incorporating 2-methacryloyloxyethyl phosphorylcholine (MPC), well known for its antifouling and biomimetic properties, was grafted to the model lens surfaces using surface-initiated atom transfer radical polymerization (SI-ATRP). The SI-ATRP modification generated a unique double-grafted polymeric architecture designed to resist protein adsorption through the presence of a surrounding hydration layer due to the PC groups and steric repulsion due to the density of the grafted chains. The polymer was grafted from model silicone hydrogel CL using a four-step SI-ATRP process. Attenuated total reflectance-Fourier transform infrared spectroscopy and XPS were used to confirm the surface chemical composition at each step of the synthesis. Both the surface wettability and equilibrium water content of the materials increased significantly upon polyMPC modification. The surface water contact angle was as low as 16.04 ± 2.37° for polyMPC-50 surfaces; complete wetting (∼0°) was observed for polyMPC-100 surfaces. A decrease in the protein adsorption by as much as 83% (p < 0.000 36) for lysozyme and 73% (p < 0.0076) for bovine serum albumin was observed, with no significant difference between different polyMPC chain lengths. The data demonstrate the potential of this novel modification process for the creation of extremely wettable and superior antifouling surfaces, useful for silicone hydrogel CL surfaces.

The CuAAC: Principles, Homogeneous and Heterogeneous Catalysts, and Novel Developments and Applications

The copper-catalyzed azide/alkyne cycloaddition reaction (CuAAC) has emerged as the most useful "click" chemistry. Polymer science has profited enormously from CuAAC by its simplicity, ease, scope, applicability and efficiency. Basic principles of the CuAAC are reviewed with a focus on homogeneous and heterogeneous catalysts, ligands, anchimeric assistance, and basic chemical principles. Recent developments of ligand design and acceleration are discussed.

Comparative Study of Protein Aggregation Arrest by Zwitterionic Polysulfobetaines: Using Contrasting Raft Agents

Protein aggregation has caused limitations in the study and development of protein-based biopharmaceuticals. We prepared different polysulfobetaine (poly-SPB) polymers via reversible addition fragmentation chain transfer (RAFT) polymerization. These polymers exhibited high efficiency in modulation of protein aggregation. We synthesized polysulfobetaines using two different RAFT agents, and analyzed the aggregation profile of lysozyme and insulin. In poly-SPBs, existence of a hydrophobic RAFT agent resulted in visible enhancement of the residual enzymatic activity of lysozyme, whereas it remained unaffected by the hydrophilic RAFT agent. In addition, these polymers resulted in significant suppression in the aggregation of insulin. Increase in the molecular weight of the polymer caused higher efficiency to perpetuate enzymatic activity of lysozyme upon thermal denaturation. The polymers arrested the formation of amyloid like fibrils of lysozyme and insulin, thus indicating their potential to inhibit aggregation. The results unambiguously demonstrate the importance of polysulfobetaine moiety and hydrophobicity in protein aggregation inhibition. This study gives insight into the protein aggregation inhibition by zwitterionic polymers, which have a potential to be developed as aggregation inhibitors in the future.

Scalable High-Affinity Stabilization of Magnetic Iron Oxide Nanostructures by a Biocompatible Antifouling Homopolymer

Iron oxide nanostructures have been widely developed for biomedical applications because of their magnetic properties and biocompatibility. In clinical applications, stabilization of these nanostructures against aggregation and nonspecific interactions is typically achieved using weakly anchored polysaccharides, with better-defined and more strongly anchored synthetic polymers not commercially adopted because of their complexity of synthesis and use. Here, we show for the first time stabilization and biocompatibilization of iron oxide nanoparticles by a synthetic homopolymer with strong surface anchoring and a history of clinical use in other applications, poly(2-methacryloyloxyethyl phosphorylcholine) [poly(MPC)]. For the commercially important case of spherical particles, binding of poly(MPC) to iron oxide surfaces and highly effective individualization of magnetite nanoparticles (20 nm) are demonstrated. Next-generation high-aspect-ratio nanowires (both magnetite/maghemite and core-shell iron/iron oxide) are, furthermore, stabilized by poly(MPC) coating, with the nanowire cytotoxicity at large concentrations significantly reduced. The synthesis approach exploited to incorporate functionality into the poly(MPC) chain is demonstrated by random copolymerization with an alkyne-containing monomer for click chemistry. Taking these results together, poly(MPC) homopolymers and random copolymers offer a significant improvement over current iron oxide nanoformulations, combining straightforward synthesis, strong surface anchoring, and well-defined molecular weight.

Probing the neutralization behavior of zwitterionic monomer-containing dental adhesive

OBJECTIVE

To investigate the polymerization kinetics, neutralization behavior, and mechanical properties of amine-functionalized dental adhesive cured in the presence of zwitterionic monomer, methacryloyloxyethyl phosphorylcholine (MPC).

METHODS

The control adhesive was a mixture based on HEMA/BisGMA/2-N-morpholinoethyl methacrylate (MEMA) (40/30/30, w/w/w). The control and experimental formulations containing MPC were characterized with regard to water miscibility of liquid resins, photopolymerization kinetics, water sorption and solubility, dynamic mechanical properties and leachables from the polymers (aged in ethanol). The neutralization behavior of the adhesives was determined by monitoring the pH of lactic acid (LA) solution.

RESULTS

The water miscibility decreased with increasing MPC amount. The water sorption of experimental copolymer specimen was greater than the control. The addition of 8wt% water led to improved photo-polymerization efficiency for experimental formulations at MPC of 2.5 and 5wt%, and significant reduction in the cumulative amounts of leached HEMA, BisGMA, and MEMA, i.e. 90, 60 and 50% reduction, respectively. The neutralization rate of MPC-containing adhesive was faster than control. The optimal MPC concentration in the formulations was 5wt%.

SIGNIFICANCE

Incompatibility between MEMA and MPC led to a decrease in water miscibility of the liquid resins. Water (at 8wt%) in the MPC-containing formulations (2.5-5wt% MPC) led to higher DC, faster RPmax and significant reduction in leached HEMA, BisGMA, and MEMA. The neutralization rate was enhanced with the addition of MPC in the amine-containing formulation. Promoting the neutralization capability of dentin adhesives could play an important role in reducing recurrent decay at the composite/tooth interface.

Nanotribological Investigation of Polymer Brushes with Lithographically Defined and Systematically Varying Grafting Densities

Following controlled photodeprotection of a 2-nitrophenylpropyloxycarbonyl-protected (aminopropyl)triethoxysilane (NPPOC-APTES) film and subsequent derivatization with a bromoester-based initiator, poly(2-(methacryloyloxy)ethylphosphorylcholine) (PMPC) brushes with various grafting densities were grown from planar silicon substrates using atom transfer radical polymerization (ATRP). The grafting density correlated closely with the extent of deprotection of the NPPOC-APTES. The coefficient of friction for such PMPC brushes was measured by friction force microscopy in water and found to be inversely proportional to the grafting density due to the osmotic pressure that resists deformation. Deprotection of NPPOC-APTES via near-field photolithography using a range of writing rates enabled the fabrication of neighboring nanoscopic polymeric structures with dimensions ranging from 100 to 1000 nm. Slow writing rates enable complete deprotection to occur; hence, polymer brushes are formed with comparable thicknesses to macroscopic brushes grown under the same conditions. However, the extent of deprotection is reduced at higher writing rates, resulting in the concomitant reduction of the brush thickness. The coefficient of friction for such polymer brushes varied smoothly with brush height, with lower coefficients being obtained at slower writing rate (increasing initiator density) because the solvated brush layer confers greater lubricity. However, when ultrasharp probes were used for nanotribological measurements, the coefficient of friction increased with brush thickness. Under such conditions, the radius of curvature of the tip is comparable to the mean spacing between brush chains, allowing the probe to penetrate the brush layer leading to a relatively large contact area.

Polymerisation of 2-acrylamido-2-methylpropane sulfonic acid sodium salt (NaAMPS) and acryloyl phosphatidylcholine (APC) via aqueous Cu(0)-mediated radical polymerisation

The scope of aqueous Cu(0)-mediated living radical polymerisation has been expanded with the preparation of poly(2-acrylamido-2-methylpropane sulfonic acid)sodium salt (P(NaAMPS)) and poly(acryloyl phosphatidycholine) (PAPC).

Fine Adjustment of Interfacial Potential between pH-Responsive Hydrogels and Cell-Sized Particles

We quantitatively determined interfacial potentials between cell-sized particles and stimulus-responsive hydrogels using a microinterferometer. The hydrogel is based on physically interconnected ABA triblock copolymer micelles comprising an inner biocompatible PMPC block and two outer pH-responsive PDPA blocks. The out-of-plane temporal fluctuation in the position of the cell-sized particles was calculated from changes in the interference pattern measured by Reflection Interference Contrast Microscopy (RICM), thus yielding the particle-substrate interaction potential V (Δh). Measurements in pH buffers ranging from 7.0 to 7.8 resulted in a systematic reduction in height of the potential minima ⟨Δh⟩ and a concomitant increase in the potential curvature V″ (Δh). The experimental data were analyzed by applying the modified Ross and Pincus model for polyelectrolytes, while accounting for gravitation, lubrication and van der Waals interactions. Elastic moduli calculated from V″ (Δh) were in good agreement with those measured by Atomic Force Microscopy. The ability to fine-tune both the gel elasticity and the interfacial potential at around physiological pH makes such triblock copolymer hydrogels a promising biocompatible substrate for dynamic switching of cell-material interactions.

Recent Progress on Transition Metal Catalyst Separation and Recycling in ATRP

Atom transfer radical polymerization (ATRP) is a versatile and robust tool to synthesize a wide spectrum of monomers with various designable structures. However, it usually needs large amounts of transition metal as the catalyst to mediate the equilibrium between the dormant and propagating species. Unfortunately, the catalyst residue may contaminate or color the resultant polymers, which limits its application, especially in biomedical and electronic materials. How to efficiently and economically remove or reduce the catalyst residue from its products is a challenging and encouraging task. Herein, recent advances in catalyst separation and recycling are highlighted with a focus on (1) highly active ppm level transition metal or metal free catalyzed ATRP; (2) post-purification method; (3) various soluble, insoluble, immobilized/soluble, and reversible supported catalyst systems; and (4) liquid-liquid biphasic catalyzed systems, especially thermo-regulated catalysis systems.

Macromolecular engineering by atom transfer radical polymerization

This Perspective presents recent advances in macromolecular engineering enabled by ATRP. They include the fundamental mechanistic and synthetic features of ATRP with emphasis on various catalytic/initiation systems that use parts-per-million concentrations of Cu catalysts and can be run in environmentally friendly media, e.g., water. The roles of the major components of ATRP--monomers, initiators, catalysts, and various additives--are explained, and their reactivity and structure are correlated. The effects of media and external stimuli on polymerization rates and control are presented. Some examples of precisely controlled elements of macromolecular architecture, such as chain uniformity, composition, topology, and functionality, are discussed. Syntheses of polymers with complex architecture, various hybrids, and bioconjugates are illustrated. Examples of current and forthcoming applications of ATRP are covered. Future challenges and perspectives for macromolecular engineering by ATRP are discussed.

Nanoscale contact mechanics of biocompatible polyzwitterionic brushes

Friction force microscopy has been used to demonstrate that biocompatible, lubricious poly(2-(methacryloyloxy)ethylphosphorylcholine) (PMPC) brushes exhibit different frictional properties depending on the medium (methanol, ethanol, 2-propanol, and water; the latter also with different quantities of added salt). The chemical functionalization of the probe (amine-, carboxylic acid-, and methyl-terminated probes were used) is not as important as the medium in determining the contact mechanics. For solvents such as methanol, where the adhesion between AFM probe and PMPC brushes is negligible, a linear friction-load relationship is observed. In contrast, the friction-load plot is nonlinear in ethanol or water, media in which stronger adhesion is measured. For ethanol, the data indicate Johnson-Kendall-Roberts (JKR) mechanics, whereas the Derjaguin-Muller-Toporov (DMT) model provided a good fit for the data acquired in water. Contact mechanics on zwitterionic PMPC brushes immersed in aqueous solutions of varying ionic strength followed the same trend, with high adhesion energies being correlated with a nonlinear friction-load relationship. These results can be rationalized by treating the friction force as the sum of a load-dependent term, attributed to molecular plowing, and an area-dependent shear term. In a good solvent for PMPC such as methanol, the shear term is negligible and the sliding interaction is dominated by molecular plowing. However, the adhesion energy is significantly larger in water and ethanol and the shear term is no longer negligible.

Cell membrane-inspired phospholipid polymers for developing medical devices with excellent biointerfaces

This review article describes fundamental aspects of cell membrane-inspired phospholipid polymers and their usefulness in the development of medical devices. Since the early 1990s, polymers composed of 2-methacryloyloxyethyl phosphorylcholine (MPC) units have been considered in the preparation of biomaterials. MPC polymers can provide an artificial cell membrane structure at the surface and serve as excellent biointerfaces between artificial and biological systems. They have also been applied in the surface modification of some medical devices including long-term implantable artificial organs. An MPC polymer biointerface can suppress unfavorable biological reactions such as protein adsorption and cell adhesion - in other words, specific biomolecules immobilized on an MPC polymer surface retain their original functions. MPC polymers are also being increasingly used for creating biointerfaces with artificial cell membrane structures.