Controlled/“Living” Radical Polymerization of Glycidyl Methacrylate at Ambient Temperature

Highly toughened poly (lactic acid)/poly (butylene adipate-terephthalate) blends in-situ compatibilized by MMA-co-GMA copolymers with different epoxy group content

Poor compatibility limits the wide application of biodegradable poly (lactic acid)/poly (butylene adipate-terephthalate) (PLA/PBAT) blends in packaging industry. How to prepare compatibilizers with high efficiency and low cost by simple methods is a challenge. In this work, methyl methacrylate-co-glycidyl methacrylate (MG) copolymer with different epoxy group content are synthesized as reactive compatibilizers to resolve this issue. The effects of glycidyl methacrylate and MG contents on phase morphology and physical properties of the PLA/PBAT blends are systematically investigated. During melt blending, MG migrates to the phase interface, and then grafts with PBAT to form PLA-g-MG-g-PBAT terpolymers. When the molar ratio of MMA and GMA in MG is 3:1, the reaction activity of MG with PBAT is the highest and the compatibilization effect is the best. When the M₃G₁ content is 1 wt%, the tensile strength and the fracture toughness are increased to 37. 1 MPa and 120 MJ/m³, which increase by 34 % and 87 %, respectively. The size of PBAT phase decreases from 3.7 μm to 0.91 μm. Therefore, this work provides a low-cost and simple method to prepare the compatibilizers with high efficiency for the PLA/PBAT blend, and provides a new basis for the design of epoxy compatibilizers.

Polymeric Delivery of Therapeutic Nucleic Acids

The advent of genome editing has transformed the therapeutic landscape for several debilitating diseases, and the clinical outlook for gene therapeutics has never been more promising. The therapeutic potential of nucleic acids has been limited by a reliance on engineered viral vectors for delivery. Chemically defined polymers can remediate technological, regulatory, and clinical challenges associated with viral modes of gene delivery. Because of their scalability, versatility, and exquisite tunability, polymers are ideal biomaterial platforms for delivering nucleic acid payloads efficiently while minimizing immune response and cellular toxicity. While polymeric gene delivery has progressed significantly in the past four decades, clinical translation of polymeric vehicles faces several formidable challenges. The aim of our Account is to illustrate diverse concepts in designing polymeric vectors towards meeting therapeutic goals of in vivo and ex vivo gene therapy. Here, we highlight several classes of polymers employed in gene delivery and summarize the recent work on understanding the contributions of chemical and architectural design parameters. We touch upon characterization methods used to visualize and understand events transpiring at the interfaces between polymer, nucleic acids, and the physiological environment. We conclude that interdisciplinary approaches and methodologies motivated by fundamental questions are key to designing high-performing polymeric vehicles for gene therapy.

Tuning the growth, crosslinking, and gating effect of disulfide-containing PGMAs on the surfaces of mesoporous silica nanoparticles for redox/pH dual-controlled cargo release

PGMA brushes grown on MSN surfaces via SI-ATRP could be cross-linked by cystamine or through a KI/H₂O₂ (30%) assisted disulfide bond exchange to realize gating effects for redox/pH dual-controlled cargo release.

Facile synthesis of well-controlled poly(glycidyl methacrylate) and its block copolymers via SARA ATRP at room temperature

The detailed synthesis of poly(glycidyl methacrylate) (PGMA) by atom transfer radical polymerization (ATRP) using a catalytic system of Fe(0)/Cu(ii)Br₂ at room temperature is reported.

Enzyme mimetic-catalyzed ATRP and its application in block copolymer synthesis combined with enzymatic ring-opening polymerization

Use of an enzyme mimetic (DhHP-6) as an ATRP catalyst for the synthesis of a series of functional polymers.

Zero valent metal/RAFT agent mediated CRP of functional monomers at room temperature: a promising catalyst system for CRP

A facile approach to synthesize GMA polymers using Fe(0)/RAFT agent mediated control radical polymerization.

Multiblock sequence-controlled glycopolymers via Cu(0)-LRP following efficient thiol–halogen, thiol–epoxy and CuAAC reactions

The combination of copper(0) mediated living radical polymerization (Cu(0)-LRP) with thiol–halogen, thiol–epoxy and copper catalysed alkyne azide coupling (CuAAC) click chemistry has been employed to give a new route to multiblock sequence-controlled glycopolymers.

Tris(hydroxymethyl)aminomethane-functionalized silica particles and their application for hydrophilic interaction chromatography

A new method is presented for synthesizing a highly hydrophilic silica-based material for use in hydrophilic interaction chromatography. Porous silica particles used as a starting substrate were modified with 3-bromopropyl trichlorosilane and grafted with glycidyl methacrylate by controlled ("living") atom transfer radical polymerization in order to introduce an oxirane-carrying reactive tentacle layer on the silica surface. The grafted material was thereafter subject to an oxirane ring opening reaction with tris(hydroxy-methyl)aminomethane in dimethylformamide to yield a polymer-bound equivalent of the well known and highly hydrophilic "TRIS" buffering substance. Chemical characterization was done by diffuse reflectance FT-IR, X-ray photoelectron spectroscopy, elemental analysis, and (1)H NMR. Porosity and surface area examination was done with Brunauer-Emmett-Teller. Chromatographic application of the material was evaluated by separations of nucleic bases, small organic acids, and common nucleotides under mixed hydrophilic interaction chromatography and weak anion exchange conditions.

Facile synthesis of multiamino vinyl poly(amino acid)s for promising bioapplications

We presented a general and facile strategy to prepare biocompatible multiamino polymers. Series of new monomers were synthesized by esterification of 2-hydroxyethyl methacrylate (HEMA) and Boc-amino acids, such as Boc-l-phenylalanine, Boc-glycine, Boc-l-alanine, Boc-l-valine, and Boc-l-lysine. Subsequent vinyl polymerization of monomers gave rise to vinyl poly(amino acid)s with a side primary amino group at each unit if deprotected. Both atom transfer radical polymerization (ATRP) and conventional free radical polymerization (FRP) were employed to prepare the multiamino polymers. A well controlled effect upon molecular weight with the standard first-order kinetics was achieved in cases of ATRP, and high molecular weight polymers were obtained via FRP. MTT assay showed that cell survival rates for the multiamino polymers were almost maintained above 90% and that their cytotoxicities were much lower than that of linear PEI (PEI 25000). Zeta potential measurements demonstrated that the vinyl poly(amino acid)s are electropositive, and AFM measurements showed that the vinyl poly(amino acid)s could tightly condense DNA into granular structures at a suitable concentration. The combination of facile availability, controlled productivity, low cytotoxicity and strong binding ability with DNA promises the great potential of the novel multiamino polymers in bioapplications.

Hybrid polymerization of vinyl and hetero-ring groups of glycidyl methacrylate resulting in thermoresponsive hyperbranched polymers displaying a wide range of lower critical solution temperatures

Hybrid polymerization of glycidyl methacrylate (GMA) with potassium hydride (KH) and various oligo(ethylene glycol)s as the initiating system, in which both vinyl polymerization and ring-opening polymerization occur simultaneously, generates hyperbranched poly(ether-ester)s. The reaction process has been followed by an in situ nuclear magnetic resonance technique. The experimental results indicate that both the vinyl and epoxy groups of GMA undergo polymerization, with the reactivity of the latter being much higher than that of the former. Interestingly, the resulting hyperbranched polymers exhibit a sharp phase transition in water at the lower critical solution temperature (LCST). Significantly, the LCST values can be accurately controlled from 0 to 100 degrees C by changing the hydrophilic/hydrophobic balance of GMA and various oligo(ethylene glycol)s or by modification of the precursor polymer through acetylation. This novel stimuli-responsive hyperbranched polymer is a promising candidate for a new generation of commercially viable thermoresponsive polymers following on from the widely used poly(N-isopropylacrylamide) (PNIPAM).