Anionic Polymerization of n-Butyl Cyanoacrylate in Emulsion and Miniemulsion

Stabilizing Liquid in Precise Nonequilibrium Shapes via Fast Interfacial Polymerization

Due to the minimization of interface area caused by surface tension, the stabilization of liquid in complex and precise nonequilibrium shapes is challenging. In this work, a simple, surfactant-free, and covalent strategy to stabilize liquid in precise nonequilibrium shapes via fast interfacial polymerization (FIP) of highly reactive n-butyl cyanoacrylate (BCA) monomer triggered by water-soluble nucleophiles is described. Full interfacial coverage can be achieved instantly, and the resultant polyBCA film anchored at the interface can support the unequal interface stress, which allows the production of non-spherical droplets with complex shapes. Notably, the formulation of internal aqueous phase is nearly unaffected since no specific additive is required. Moreover, considering the excellent biocompatibility of BCA and polyBCA, the produced droplets can be used as micro-bioreactor for enzyme catalysis and even bacterial culture, which well mimic the morphology of cells and bacteria to achieve the biochemical reaction in non-spherical droplets. The present work not only opens a new sight for the stabilization of liquid in nonequilibrium shapes, but may also promote the development of synthetic biology based on non-spherical droplets, and tremendous potential applications are anticipated.

Electrospun Scaffolds Based on Poly(butyl cyanoacrylate) for Tendon Tissue Engineering

Tendon disorders are common medical conditions that could lead to significant disability, pain, healthcare costs, and a loss of productivity. Traditional approaches require long periods of treatment, and they largely fail due to the tissues weakening and the postoperative alterations of the normal joint mechanics. To overcome these limitations, innovative strategies for the treatment of these injuries need to be explored. The aim of the present work was the design of nano-fibrous scaffolds based on poly(butyl cyanoacrylate) (PBCA), a well-known biodegradable and biocompatible synthetic polymer, doped with copper oxide nanoparticles and caseinphosphopeptides (CPP), able to mimic the hierarchical structure of the tendon and to improve the tissue healing potential. These were developed as implants to be sutured to reconstruct the tendons and the ligaments during surgery. PBCA was synthetized, and then electrospun to produce aligned nanofibers. The obtained scaffolds were characterized for their structure and physico-chemical and mechanical properties, highlighting that CuO and CPP loading, and the aligned conformation determined an increase in the scaffold mechanical performance. Furthermore, the scaffolds loaded with CuO showed antioxidant and anti-inflammatory properties. Moreover, human tenocytes adhesion and proliferation to the scaffolds were assessed in vitro. Finally, the antibacterial activity of the scaffolds was evaluated using Escherichia coli and Staphylococcus aureus as representative of Gram-negative and Gram-positive bacteria, respectively, demonstrating that the CuO-doped scaffolds possessed a significant antimicrobial effect against E. coli. In conclusion, scaffolds based on PBCA and doped with CuO and CPP deserve particular attention as enhancers of the tendon tissue regeneration and able to avoid bacterial adhesion. Further investigation on the scaffold efficacy in vivo will assess their capability for enhancing the tendon ECM restoration in view of accelerating their translation to the clinic.

In Vitro Evaluation of Acrylic Adhesives in Lymphatic Fluids-Influence of Glue Type and Procedural Parameters

To evaluate the embolic properties of different acrylic adhesive/iodized oil mixtures for lymphatic interventions. Polymerization of histoacryl (HA) (Bayer Healthcare) and glubran 2 (GL) (GEM) mixed with iodized oil (ratios 1:0–1:7) were investigated in lymphatic fluids with low and high triglyceride (low TG & high TG) contents. Static polymerization time and dynamic polymerization experiments with different volumes of glucose flush (1, 2 and 5 mL) were performed to simulate thoracic duct embolization. For both glues, static polymerization times were longer when the iodized oil content was increased and when performed in high TG lymphatic fluid. In the dynamic experiments, the prolongation of polymerization due to the oil content and TG levels was less pronounced for both glue types. Increased lymphatic flow rates decreased embolization times for low glue/oil ratios while preventing embolization for high glue/oil ratios. Higher glucose flush volumes increased occlusion times. Polymerization times of acrylic glue in a lymphatic fluid are prolonged by increasing the iodized oil concentration and triglyceride concentration as well as by using larger volumes of glucose flush. Increased lymphatic flow rates decrease embolization times for low glue/oil ratios and may prevent embolization for high glue/oil ratios.

Synthesis and Characterization of Biodegradable Poly(butyl cyanoacrylate) for Drug Delivery Applications

Poly(butyl cyanoacrylate) (PBCA) is a biodegradable and biocompatible homopolymer which is used as a carrier matrix for drug delivery systems in the pharmaceutical industry. Typically, polymerization is carried out under aqueous conditions and results in molecular weights are mostly lower than 3000 g/mol due to the instability of the high molecular weight PBCA. However, the stability of polymer excipients is a major prerequisite for drug product development in the pharmaceutical industry. In this work, a reliable polymer synthesis strategy for PBCA was designed to control the molecular weight in a nonaqueous polymerization environment. The anionic polymerization process and the impact of key synthesis parameters were investigated. The results confirmed that the previously postulated depolymerization–repolymerization process (DPRP) in the literature can be used to tailor the molecular weight of PBCA. The amount of sodium methoxide present during the polymerization proved to be the key parameter to control the DPRP and the molecular weight as desired. In addition, it was discovered that end-capping the PBCA chain suppressed the DPRP and prevented monomer release by depriving the PBCA of its living character. Thus, neat PBCA polymer with varying molecular weights determined by Advanced Polymer Chromatography™ as well as end-capped PBCA were synthesized, and the improvement of the chemical and shelf-life stability were confirmed using NMR.

Interfacial Polymerization: From Chemistry to Functional Materials

Interfacial polymerization, where a chemical reaction is confined at the liquid-liquid or liquid-air interface, exhibits a strong advantage for the controllable fabrication of films, capsules, and fibers for use as separation membranes and electrode materials. Recent developments in technology and polymer chemistry have brought new vigor to interfacial polymerization. Here, we consider the history of interfacial polymerization in terms of the polymerization types: interfacial polycondensation, interfacial polyaddition, interfacial oxidative polymerization, interfacial polycoordination, interfacial supramolecular polymerization, and some others. The accordingly emerging functional materials are highlighted, as well as the challenges and opportunities brought by new technologies for interfacial polymerization. Interfacial polymerization will no doubt keep on developing and producing a series of fascinating functional materials.

Molecular Staples for Tough and Stretchable Adhesion in Integrated Soft Materials

The integration of soft materials-biological tissues, gels, and elastomers-is a rapidly developing technology of this time. Whereas hard materials are adhered using adhesives of hard polymers since antiquity, these hard polymers are generally unsuited to adhere soft materials, because hard polymers constrain the deformation of soft materials. This paper describes a design principle to use hard polymers to adhere soft materials, such that adhesion remains tough after the adhered soft materials are subject to many cycles of large stretches in the plane of their interface. The two soft materials have stretchable polymer networks, but need not have functional groups for adhesion. The two soft materials are adhered by forming, in situ at their interface, islands of a hard polymer. The adhesion is tough if the islands themselves are strong, and the polymers of the islands are in topological entanglement with the polymer networks of the soft materials. The adhesion is stretchable if the islands are smaller than the flaw sensitivity length. Several methods of forming the hard polymer islands are demonstrated, and the mechanics and chemistry of adhesion are studied. The design principle will enable many hard polymers to form tough and stretchable adhesion between soft materials.

Emulsion and miniemulsion techniques in preparation of polymer nanoparticles with versatile characteristics

In recent years, polymer nanoparticles (PNPs) have found their ways into numerous applications extending from electronics to photonics, conducting materials to sensors and medicine to biotechnology. Physical properties and surface morphology of PNPs are the most important parameters that significantly affect on their exploitations and can be controlled through the synthesis process. Emulsion and miniemulsion techniques are among the most efficient and wide-spread methods for preparation of PNPs. The objective of this review is to present and highlight the recent developments in the advanced PNPs with specific properties that are produced through emulsion and miniemulsion processes.

Anionic Polymerization of Methylene Malonate for High-Performance Coatings

Here, we demonstrate the anionic polymerization and the high reactivity of the novel monomer diethyl methylene malonate (DEMM). At room temperature and under atmospheric conditions, water and anionic functional groups (i.e., carboxyl, boronic, and phenol) quickly initiate DEMM. The polymerization of DEMM in water and the final molecular weight of the polymer were both demonstrated to be pH-dependent. Systematically, investigations were conducted to study the conversion rate of DEMM with various functional groups, and the polymerization was verified to occur with anionic groups using a carboxylate-initiated DEMM system. For coating applications, we also investigated a multifunctional derivative monomer called (DEMM)₆ that is an oligomeric polyester of DEMM esterified with butanediol that contains on average six repeat units of reactive DEMM (commercially known as Forza B3000 XP). The incorporation of 15 wt % (DEMM)₆ into latex containing methacrylate acid as a functional monomer yielded cross-linked coatings with a gel content of 76.25 wt % that had a 289% improvement in rub-resistance performance compared to controls (without (DEMM)₆). This study provides a facile methodology to synthesize cross-linked latex coatings at room temperature.

Nucleophile-initiated anionic polymerization of zwitterionic monomers derived from vinylpyridines in aqueous media under ambient aerobic conditions

Anionic polymerization of vinylpyridine based zwitterionic monomers using nucleophile initiators under natural conditions and DFT calculations for such polymerization are reported here.

Polymerization kinetics of a mixture of Lipiodol and Glubran 2 cyanoacrylate glue upon contact with a proteinaceous solution

The Glubran 2 cyanoacrylate glue is a liquid embolic agent used to block blood vessels endovascularly. Typically mixed with an iodized oil (Lipiodol) for visualization under X-ray, it polymerizes when in contact with blood and tissues owing to the presence of ions and proteins. The objective of the study is to determine the influence of plasma proteins in the polymerization reaction. A triggering solution containing bovine serum albumin (BSA) and the main blood ions is used as a model of plasma. The polymerization kinetics of Glubran 2-Lipiodol mixtures is measured upon aspiration in a capillary tube and contact with the proteinaceous solution. Having varied the glue and protein concentrations, we show that glue-Lipiodol mixtures with concentrations larger or equal to 25% polymerize when put in contact with an ionic solution containing at least 4% of BSA. The reaction is decomposed into two phases: a fast zwitterionic polymerization induced by the BSA molecules followed by a slower polymerization phase. The reaction speed and extent of the solidification region mostly depend on the glue concentration. The time for the glue solution to polymerize over a 1mm thickness varies from 5s for pure glue to about 1min for a 50% glue concentration, and 10min for a 25% glue mixture. It is the first time that the kinetics of the two polymerization reactions is quantified for Glubran 2, which will provide the information needed by interventional radiologists to optimize the planning of endovascular glue injection.

Polymerization kinetics of n-butyl cyanoacrylate glues used for vascular embolization

Vascular embolization is a minimally invasive treatment used for the management of vascular malformations and tumors. It is carried out under X-ray by navigating a microcatheter into the targeted blood vessel, through which embolic agents are delivered to occlude the vessels. Cyanoacrylate liquid glues have been widely used for vascular embolization owing to their low viscosity, rapid polymerization/solidification rate, good penetration ability and low tissue toxicity. The objective of this study is to quantitatively investigate the physical properties of two n-butyl cyanoacrylate (nBCA) glues (Glubran 2 and Histoacryl) mixed with an iodized oil (Lipiodol) at various concentrations. We show that an homogeneous solution results from the mixing of the glue and Lipiodol, and that the viscosity, density and interfacial tension of the mixture increase with the proportion in Lipiodol. We have designed a new experimental setup to systemically characterize the polymerization kinetics of a glue mixture upon contact with an ionic solution. We observe that the whole polymerization process includes two phases: an interfacial polymerization that takes place at the interface as soon as the two liquids are in contact with a characteristic time scale of the order of the minute; a volumetric polymerization during which a reaction front propagates within the mixture bulk with a characteristic time scale of the order of tens of minutes. The polymerization rate, front propagation speed and volume reduction increase with the glue concentrations. It is the first time that such comprehensive results are obtained on liquid embolic agents.

Pulsed-laser and quantum mechanics study of n-butyl cyanoacrylate and methyl methacrylate free-radical copolymerization

Improved control over polymer microstructure is achieved by radical copolymerization of n-butyl cyanoacrylate with methacrylates.

Nanoparticles from renewable polymers

The use of polymers from natural resources can bring many benefits for novel polymeric nanoparticle systems. Such polymers have a variety of beneficial properties such as biodegradability and biocompatibility, they are readily available on large scale and at low cost. As the amount of fossil fuels decrease, their application becomes more interesting even if characterization is in many cases more challenging due to structural complexity, either by broad distribution of their molecular weights (polysaccharides, polyesters, lignin) or by complex structure (proteins, lignin). This review summarizes different sources and methods for the preparation of biopolymer-based nanoparticle systems for various applications.

Miniemulsion polymerizations of n-butyl cyanoacrylate via two routes: towards a control of particle degradation

This study aimed at determining the influence of the mechanism of polymerization on the molar mass and degradation of poly(n-butyl cyanoacrylate) (PBCA) nanoparticles obtained by miniemulsion polymerization. Therefore, nanoparticles of poly(n-butyl cyanoacrylate) were synthesized via radical and/or anionic miniemulsion polymerization stabilized by Brij®78, a POE based surfactant. Polymerization conditions had little influence on the final diameter while it severely affected the final molar masses of PBCA. An increase of the temperature and of the pH of the continuous phase led to higher molar masses. A further increase was observed when a radical initiator was added in the monomer. The evolution of the molar mass of the synthesized poly(n-butyl cyanoacrylate) was followed as a function of time at pH 7.4 by Size Exclusion Chromatography. As expected, the degradation kinetics strongly depended on the polymerization mechanism (anionic or radical).

Opsonization, biodistribution, cellular uptake and apoptosis study of PEGylated PBCA nanoparticle as potential drug delivery carrier

PURPOSE

For nanocarrier-based targeted delivery systems, preventing phagocytosis for prolong circulation half life is a crucial task. PEGylated poly(n-butylcyano acrylate) (PBCA) NP has proven a promising approach for drug delivery, but an easy and reliable method of PEGylation of PBCA has faced a major bottleneck.

METHODS

PEGylated PBCA NPs containing docetaxel (DTX) by modified anionic polymerization reaction in aqueous acidic media containing amine functional PEG were made as an single step PEGylation method. In vitro colloidal stability studies using salt aggregation method and antiopsonization property of prepared NPs using mouse macrophage cell line RAW264 were performed. In vitro performance of anticancer activity of prepared formulations was checked on MCF7 cell line. NPs were radiolabeled with 99mTc and intravenously administered to study blood clearance and biodistribution in mice model.

RESULTS

These formulations very effectively prevented phagocytosis and found excellent carrier for drug delivery purpose. In vivo studies display long circulation half life of PBCA-PEG20 NP in comparison to other formulations tested.

CONCLUSIONS

The PEGylated PBCA formulation can work as a novel tool for drug delivery which can prevent RES uptake and prolong circulation half life.

Miniemulsion polymerization as a versatile tool for the synthesis of functionalized polymers

The miniemulsion technique is a particular case in the family of heterophase polymerizations, which allows the formation of functionalized polymers by polymerization or modification of polymers in stable nanodroplets. We present here an overview of the different polymer syntheses within the miniemulsion droplets as reported in the literature, and of the current trends in the field.

Cationic polymerization of vinyl monomers in aqueous media: from monofunctional oligomers to long-lived polymer chains

Polymer latexes are easily prepared on a multimillion ton scale in industry using free radical initiated emulsion and suspension polymerizations in water, a cheap, nonviscous, heat-controlling, and environmentally benign solvent. Until recently, researchers had done little investigation into ionic polymerization because even a small amount of water would easily deactivate the conventional catalysts used in these processes. In the last decade, however, cationic polymerization in aqueous media has emerged as a new and attractive method for controlling the polymerization reactions using mild experimental conditions. This Account reviews the current science of and future outlook for cationic polymerization of vinyl monomers in aqueous media. We particularly emphasize the design and evolution of catalytic systems and the precision synthesis of functional polymers. Early work to tailor the suspension and emulsion cationic polymerizations of reactive monomers such as p-methoxystyrene and vinyl ethers used long-chain strong acids, called INISURF for their dual roles as initiators and surfactants, and lanthanide triflates. These polymerization processes shared two main features: (i) all reactions (initiation, propagation, and termination) occurred at the particle interface; (ii) synthesized polymers have limits on their molecular weight, attributed to the "critical DP" effect, related to the entry of oligomers inside the particles as they become increasingly hydrophobic. The next generation of catalysts, named "Lewis acid-surfactant combined catalysts" (LASC), shifted the polymerization locus from the interface to the inside of the monomer droplets, allowing for the production of long polymer chains. Recently, catalytic systems based on boranes, (BF(3)OEt(2), B(C(6)F(5))(3), (C(6)F(4)-1,2-[B(C(6)F(5))(2)]), and (C(6)F(4)-1,2-[B(C(12)F(8))](2))), have shown great potential in controlling the cationic polymerization in "wet" solution, containing an excess of water relative to Lewis acid, or aqueous media of such industrially important monomers as styrene, cyclopentadiene, and even isobutylene.

Macromolecular surfactants for miniemulsion polymerization

The use of polymeric surfactants as stabilizers in miniemulsion polymerization was reviewed. The structural characteristics of reported polymeric surfactants were detailed and compared. The concept of multi-functional polymeric surfactants was evidenced. The specificities brought by polymeric surfactants in the process of miniemulsion polymerization in comparison to molecular surfactants were analysed for the stability of the initial monomer emulsion, polymerization kinetics and characteristics of the obtained latexes. The contribution of polymeric surfactants to the control of the characteristics of the obtained nanoparticles was detailed with regard to the nature of the core material and to the surface coverage. Polymeric surfactants can be seen as powerful tools for the design of original nanoparticles. On the basis of the available data, possible research topics are suggested.

Poly(n-butyl cyanoacrylate) nanoparticles via miniemulsion polymerization (1): dextran-based surfactants

This study aims at synthesizing polysaccharide-coated poly(n-butyl cyanoacrylate) nanoparticles by miniemulsion polymerization. Because of the high reactivity of n-butyl cyanoacrylate, drastic conditions are required in order to emulsify the monomer in water while limiting its anionic polymerization. However, nanoparticles were successfully obtained by miniemulsion polymerization of butyl cyanoacrylate-in-water emulsions stabilized by amphiphilic dextran derivatives. Their physico-chemical properties were thoroughly investigated as a function of amphiphilic dextran structure and concentration. The substitution degree of the amphiphilic dextran used as stabilizer had little influence on the final properties of the obtained nanoparticles. Particle size decreased with the concentration of amphiphilic dextran in the aqueous phase whereas the hydrophilic layer thickness and the amount of adsorbed polysaccharide were nearly constant in the entire range of concentrations studied.

Design aspects of poly(alkylcyanoacrylate) nanoparticles for drug delivery

Poly(alkylcyanoacrylate) (PACA) nanoparticles were first developed 25 years ago taking advantage of the in vivo degradation potential of the polymer and of its good acceptance by living tissues. Since then, various PACA nanoparticles were designed including nanospheres, oil-containing and water-containing nanocapsules. This made possible the in vivo delivery of many types of drugs including those presenting serious challenging delivery problems. PACA nanoparticles were proven to improve treatments of severe diseases like cancer, infections and metabolic disease. For instance, they can transport drugs across barriers allowing delivery of therapeutic doses in difficult tissues to reach including in the brain or in multidrug resistant cells. This review gives an update on the more recent developments and achievements on design aspects of PACA nanoparticles as delivery systems for various drugs to be administered in vivo by different routes of administration.

Core-shell type of nanoparticles composed of poly[(n-butyl cyanoacrylate)-co-(2-octyl cyanoacrylate)] copolymers for drug delivery application: Synthesis, characterization and in vitro degradation

Core-shell type of nanoparticles (NPs) with manipulated degradation rate and balanced hydrophilic/hydrophobic properties were designed and characterized. The NPs based on the copolymers of n-butyl cyanoacrylate (BCA) and 2-octyl cyanoacrylate (OCA) were prepared by anion emulsion polymerization in 0.01N HCl solution with pluronic F127 as the stabilizer. These NPs were spherical in shape and with size smaller than 100 nm in a narrow distribution. The particle size, zeta potential, molecular weight, hydrophobicity and degradation rate of the copolymer depended on its composition significantly. In vitro chemical hydrolytic studies indicated that the degradation rate of the NPs could be controlled over 200-fold by adjusting the BCA/OCA ratio. Differential scanning calorimetry (DSC) measurements verified the existence of copolymer with tapered structure which was induced by the reactivity difference of the monomers. A BCA/OCA core-shell structure is postulated that the OCA rich segments were mainly located in the core of the NPs. The cytotoxicity of poly(2-octyl cyanoactylate) (POCA) is quite lower than that of poly(n-butyl cyanoacrylate) (PBCA) and the toxicity of poly(BCA-co-OCA) NPs is similar to that of PBCA NPs.

Nanoparticles and nanocapsules created using the Ouzo effect: spontaneous emulisification as an alternative to ultrasonic and high-shear devices

The preparation of polymeric particles and capsules by means of spontaneous droplet formation and subsequent polymer precipitation or synthesis is well-known. However, spontaneous emulsification is a phenomenon that has often been erroneously interpreted. This Minireview provides new insights into the preparation of metastable liquid dispersions by homogeneous liquid-liquid nucleation, and is based primarily on a recent study by Vitale and Katz (Langmuir, 2003, 19, 4105-4110). This spontaneous emulsification, which they named the Ouzo effect, occurs upon pouring, into water, a mixture of a totally water-miscible solvent and a hydrophobic oil--and optionally some water--thus generating long-lived small droplets, which are formed even though no surfactant is present. Herein, we review and reinterpret the most relevant publications on the synthesis of a variety of dispersions (pseudolatexes, silicone emulsions, biodegradable polymeric nanocapsules, etc.), which we believe have actually been synthesized using the Ouzo effect. The Ouzo effect may also become a substitute for high-shear techniques, which, to date have only been of limited utility on industrial scales.