Real-Time Infrared Determination of Photoinitiated Copolymerization Reactivity Ratios: Application of the Hilbert Transform and Critical Evaluation of Data Analysis Techniques

Development of bioactive catechol functionalized nanoparticles applicable for 3D bioprinting

Efficient wound treatments to target specific events in the healing process of chronic wounds constitute a significant aim in regenerative medicine. In this sense, nanomedicine can offer new opportunities to improve the effectiveness of existing wound therapies. The aim of this study was to develop catechol bearing polymeric nanoparticles (NPs) and to evaluate their potential in the field of wound healing. Thus, NPs wound healing promoting activities, potential for drug encapsulation and controlled release, and further incorporation in a hydrogel bioink formulation to fabricate cell-laden 3D scaffolds are studied. NPs with 2 and 29 M % catechol contents (named NP2 and NP29) were obtained by nanoprecipitation and presented hydrodynamic diameters of 100 and 75 nm respectively. These nanocarriers encapsulated the hydrophobic compound coumarin-6 with 70% encapsulation efficiency values. In cell culture studies, the NPs had a protective effect in RAW 264.7 macrophages against oxidative stress damage induced by radical oxygen species (ROS). They also presented a regulatory effect on the inflammatory response of stimulated macrophages and promoted upregulation of the vascular endothelial growth factor (VEGF) in fibroblasts and endothelial cells. In particular, NP29 were used in a hydrogel bioink formulation using carboxymethyl chitosan and hyaluronic acid as polymeric matrices. Using a reactive mixing bioprinting approach, NP-loaded hydrogel scaffolds with good structural integrity, shape fidelity and homogeneous NPs dispersion, were obtained. The in vitro catechol NPs release profile of the printed scaffolds revealed a sustained delivery. The bioprinted scaffolds supported viability and proliferation of encapsulated L929 fibroblasts over 14 days. We envision that the catechol functionalized NPs and resulting bioactive bioink presented in this work offer promising advantages for wound healing applications, as they: 1) support controlled release of bioactive catechol NPs to the wound site; 2) can incorporate additional therapeutic functions by co-encapsulating drugs; 3) can be printed into 3D scaffolds with tailored geometries based on patient requirements.

Short oligo(ethylene glycol) chain incorporated thermoresponsive microgels: from structural analysis to modulation of solution properties

Herein, we report synthesis of thermoresponsive poly(N-isopropylaccrylamide) (PNIPAM) microgels with short oligo(ethylene glycol) (OEG) chain comonomers (1 to 4/5 repeating unit) by surfactant-free precipitation copolymerization. The efficient incorporation of the comonomers was confirmed by a complete set of characterization methods viz., FTIR, 1H NMR, TEM, DLS, and viscometry. The structural heterogeneity and the distribution of the comonomers within the microgels were determined by means of 1H high-resolution transverse relaxation magnetization measurements. Interestingly, the incorporation of these short OEG chain comonomers led to the formation of a core-corona structure, in which the comonomers were mainly located in the core of the polymeric network with PNIPAM dangling chains at the microgel periphery. The experimental investigations of deswelling behaviours revealed that the OEG chains allowed precise control over the colloidal properties, including phase transition, particles size, swelling degree and polydispersity of the microgels. The tuneability of these properties that was interpreted in terms of polymeric hydrophobic/hydrophilic balance as well as structural diversity, could be achieved by changing the OEG chain length, comonomer feed and crosslinking density. Further, we found that the microgels with more hydrophilic OEG chains were able to show a higher relative swelling, and the same solid content thus led to a higher viscosity at all temperatures. The OEG chains remarkably improved the colloidal stability of the microgels in electrolyte solutions even at higher temperatures, thereby paving the way for the use of these microgels in a range of applications.

Bioactive and Bioadhesive Catechol Conjugated Polymers for Tissue Regeneration

The effective treatment of chronic wounds constitutes one of the most common worldwide healthcare problem due to the presence of high levels of proteases, free radicals and exudates in the wound, which constantly activate the inflammatory system, avoiding tissue regeneration. In this study, we describe a multifunctional bioactive and resorbable membrane with in-built antioxidant agent catechol for the continuous quenching of free radicals as well as to control inflammatory response, helping to promote the wound-healing process. This natural polyphenol (catechol) is the key molecule responsible for the mechanism of adhesion of mussels providing also the functionalized polymer with bioadhesion in the moist environment of the human body. To reach that goal, synthesized statistical copolymers of N-vinylcaprolactam (V) and 2-hydroxyethyl methacrylate (H) have been conjugated with catechol bearing hydrocaffeic acid (HCA) molecules with high yields. The system has demonstrated good biocompatibility, a sustained antioxidant response, an anti-inflammatory effect, an ultraviolet (UV) screen, and bioadhesion to porcine skin, all of these been key features in the wound-healing process. Therefore, these novel mussel-inspired materials have an enormous potential for application and can act very positively, favoring and promoting the healing effect in chronic wounds.

Stimuli-responsive poly(N-vinylcaprolactam-co-2-methoxyethyl acrylate) core–shell microgels: facile synthesis, modulation of surface properties and controlled internalisation into cells

Poly(N-vinylcaprolactam-co-2-methoxyethyl acrylate) core–shell microgels as imaging/diagnostic system.

Free radical polymerization of poly(ethylene glycol) diacrylate macromers: impact of macromer hydrophobicity and initiator chemistry on polymerization efficiency

A series of poly(ethylene glycol)-co-poly(lactide) diacrylate macromers was synthesized with variable PEG molecular weights (10 or 20 kDa) and lactate contents (0 or 6 lactates per end group). These macromers were polymerized to form hydrogels by free radical polymerization using either redox or photochemical initiators. The extent of polymerization was determined by monitoring the compressive modulus of the resulting hydrogels and by quantitative determination of unreacted acrylate after exhaustive hydrolysis of the gel. Polymerization efficiency was found to depend on the lactate content of the macromer, with higher lactate macromers giving more efficient polymerization. For redox-initiated polymerization using ferrous gluconate/t-butyl hydroperoxide initiator, macromers containing approximately six lactate repeats per end group required lower concentrations of initiator to reach high conversion than lactate-free macromers. Photochemical polymerization with α,α-dimethoxy-α-phenylacetophenone (Irgacure 651(®)) was found to be less efficient than redox polymerization, requiring the addition of N-vinyl-2- pyrrolidone (NVP) as a co-monomer to achieve conversions comparable with redox polymerization. When conditions were optimized to provide near complete conversion for all gels, the presence of lactate repeat units in the hydrogel was generally found to reduce swelling and increase the compressive modulus. Calculated values of molecular weight between cross-links (M(c)) and mesh size using Flory-Rehner theory showed that macromer molecular weight had the greatest impact on the network structure of the gel.

Photocatalytic Properties of Tin Oxide and Antimony-Doped Tin Oxide Nanoparticles

For the first time it is shown that N-doped SnO2nanoparticles photocatalyze directly the polymerization of the C=C bonds of (meth)acrylates under visible light illumination. These radical polymerizations also occur when these particles are doped with Sb and when the surfaces of these particles are grafted with methacrylate (MPS) groups. During irradiation with visible or UV light the position and/or intensity of the plasmon band absorption of these nanoparticles are always changed, suggesting that the polymerization starts by the transfer of an electron from the conduction band of the particle to the (meth)acrylate C=C bond. By using illumination wavelengths with a very narrow band width we determined the influence of the incident wavelength of light, the Sb- and N-doping, and the methacrylate (MPS) surface grafting on the quantum efficiencies for the initiating radical formation (Φ) and on the polymer and particle network formation. The results are explained by describing the effects of Sb-doping, N-doping, and/or methacrylate surface grafting on the band gaps, energy level distributions, and surface group reactivities of these nanoparticles. N-doped (MPS grafted) SnO2(Sb ≥ 0%) nanoparticles are new attractive photocatalysts under visible as well as UV illumination.

Concatenated two-dimensional correlation analysis: a new possibility for generalized two-dimensional correlation spectroscopy and its application to the examination of process reversibility

We propose a new application of generalized two-dimensional (2D) correlation spectroscopy called "concatenated" 2D correlation analysis, which is useful in identifying the presence of strict similarity or very subtle difference between two spectral data sets having a similar origin. This approach is very efficient and can offer many potential applications. In this study, the detailed examination of process reversibility is explored. Two forms of concatenation, horizontal and vertical concatenation of data matrices, are introduced and the latter is discussed in detail. Concatenated 2D correlation analysis allows one to investigate directly the correlation between two independent but related spectral data sets. It can extract more detailed information, such as the comparison of effects of two different perturbations or different systems. We describe the principle of the "mirror-image concatenation" in 2D correlation analysis, which is applied to demonstrate its reliability and efficiency on three spectral models: a synthetic simulation data set; experimental Fourier transform infrared (FT-IR) spectra of the thermally induced unfolding-refolding transition of bovine pancreatic ribonuclease A (RNase A) in aqueous solution; and a set of FT-IR spectra of traditional Chinese medicines (TCM) of similar origin. The concatenated 2D correlation analysis shows its power in revealing the irreversibility of the thermally induced conformation transition of RNase A as well as the comparison of different species of TCM.

Designing temperature-responsive biocompatible copolymers and hydrogels based on 2-hydroxyethyl(meth)acrylates

Free-radical copolymerization of 2-hydroxyethyl methacrylate with 2-hydroxyethyl acrylate can be successively utilized for the synthesis of water-soluble polymers and hydrogels with excellent physicochemical properties, thus showing promise for pharmaceutical and biomedical applications. In the work presented it has been demonstrated that water-soluble copolymers based on 2-hydroxyethyl methacrylate and 2-hydroxyethyl acrylate exhibit lower critical solution temperature in aqueous solutions, whereas the corresponding high molecular weight homopolymers do not have this unique property. The temperature-induced transitions observed upon heating the aqueous solutions of these copolymers proceed via liquid-liquid phase separation. The hydrogels were also synthesized by copolymerizing 2-hydroxyethyl methacrylate and 2-hydroxyethyl acrylate in the absence of a bifunctional cross-linker. The cross-linking of these copolymers during copolymerization is believed to be due to the presence of bifunctional admixtures or transesterification reactions. Transparency, swelling behavior, mechanical properties, and porosity of the hydrogels are dependent upon the monomer ratio in the copolymers. Hydrogel samples containing more 2-hydroxyethyl methacrylate are less transparent, have lower swelling capacity, higher elastic moduli, and pores of smaller size. The assessment of the biocompatibility of the copolymers using the slug mucosal irritation test revealed that they are also less irritant than poly(acrylic acid).

Photocatalysed (Meth)acrylate Polymerization by (Antimony-Doped) Tin Oxide Nanoparticles and Photoconduction of Their Crosslinked Polymer Nanoparticle Composites

In the absence of another (photo)radical initiator Sb:SnO2nanoparticles (0≤Sb≤13at %) photocatalyze during irradiation with UV light the radical polymerization of (meth)acrylate monomers. When cured hard and transparent (>98%) films with a low haze (<1%) are required, when these particles are grafted in advance with 3-methacryloxypropyltrimethoxysilane (MPS) and doped with Sb. Public knowledge about the photocatalytic properties of Sb:SnO2nanoparticles is hardly available. Therefore, the influence of particle concentration, surface groups, and Sb doping on the rate of C=C (meth)acrylate bond polymerization was determined with aid of real-time FT-IR spectroscopy. By using a wavelength of irradiation with a narrow bandgab (315±5 nm) the influence of these factors on the quantum yield (Φ) and on polymer and particle network structure formation was determined. It is shown that Sb doping and MPS grafting of the particles lowers Φ. MPS grafting of the particles also influences the structure of the polymer network formed. Without Sb doping of these particles unwanted, photocatalytic side reactions occur. It is also shown that cured MPS-Sb:SnO2/(meth)acrylate nanocomposites have photoconduction properties even when the particle concentration is as low as 1 vol.%. The results suggest that the Sb:SnO2(Sb>0at %) nanoparticles can be attractive fillers for other photocatalytic applications photorefractive materials, optoelectronic devices and sensors.

Biocompatible poly(N-vinyllactam)-based materials with environmentally-responsive permeability

Biocompatible polymer-based materials whose properties respond to environmental stimuli are of great value in biomedical and biotechnological applications (e.g., controlled release of drugs and sensitive reactants, bioseparations, spontaneous adjusting of flow of liquids including flow control in microfluidic devices). This study describes preparation and properties of biocompatible poly(N-vinyllactam)-based environment responsive composite membranes. The non-charged network N-vinyl lactam polymers form hydrogels that can exhibit swelling and de-swelling behaviour and, thus, regulate porosity of the membrane. The first part of the study has involved investigation of bulk polymerization reactivity of N-vinylcaprolactam (VCL)-based systems. VCL has been combined with up to 20 mol% of N-vinylpyrrolidone (N-vinylbutyrolactam). These synthetic processes have been investigated as thermal polymerizations (with and without a free-radical initiator) and photopolymerizations. Subsequently, the most reactive systems have been used to prepare composite materials by polymerization-modifying borosilicate microfibre membranes. The modified membranes have been characterized by the net mass gain, infrared spectra, and change in permeability in response to changes in ionic strength of the aqueous media. The permeability experiments have been carried out at constant fluxes and the resultant changes in trans-membrane pressure observed. Those membranes that are ionic-strength responsive could potentially be used for bio-separations and other types of biomedical and biotechnological applications.

Multivariate curve resolution-alternating least squares (MCR-ALS) applied to spectroscopic data from monitoring chemical reactions processes

This paper overviews the application of multivariate curve resolution (optimized by alternating least squares) to spectroscopic data acquired by monitoring chemical reactions and other processes. The goals of the resolution methods and the principles for understanding their applications are described. Some of the problems arising from these evolving systems and the limitations of the multivariate curve resolution methods are also discussed. This article reviews most of the applications of multivariate curve resolution applied to reacting systems published between January 2000 and June 2007. Some basic papers dated before 2000 have also been included.