The Role of Salt in Governing the Adsorption Mechanisms of Micelle-Forming Polyelectrolyte/Neutral Diblock Copolymers

Cationic poly(N-isopropylacrylamide) block copolymer adsorption investigated by dual polarization interferometry and lattice mean-field theory

A series of cationic diblock copolymers, poly(N-isopropylacrylamide)(48)-block-poly((3-acrylamidopropyl)trimethylammonium chloride)(X), abbreviated as PNIPAAM(48)-b-PAMPTMA(+)(X) (X = 0, 6, 10, 14, and 20), has been synthesized, and their adsorption onto silicon oxynitride from aqueous solution has been investigated using dual polarization interferometry. The polymer adsorption was modeled by using a lattice mean-field theory, and a satisfactory consistency between theory and experiments was found in terms of surface excess and layer thickness. Both theory and experiments show that the adsorption is limited by steric repulsion for X < X(max) and by electrostatic interactions for X > X(max). Modeling demonstrates that significant surface charge regulation occurs due to adsorption. Both the nonionic and cationic block exhibit nonelectrostatic affinity to silicon oxynitride and thus contribute to the driving force for adsorption, and modeling is used for clarifying how changes in the nonelectrostatic affinity affects the surface excess. The segments of the nonionic and cationic blocks seem less segregated when both have a nonelectrostatic affinity for the surface compared to the case where the segments had no surface affinity. Adsorption kinetics was investigated experimentally. Two kinetic regimes were observed: the adsorption rate is initially controlled by the mass transfer rate to the surface and at higher coverage is limited by the attachment rate.

Well-defined critical association concentration and rapid adsorption at the air/water interface of a short amphiphilic polymer, amphipol A8-35: a study by Förster resonance energy transfer and dynamic surface tension measurements

Amphipols (APols) are short amphiphilic polymers designed to handle membrane proteins (MPs) in aqueous solutions as an alternative to small surfactants (detergents). APols adsorb onto the transmembrane, hydrophobic surface of MPs, forming small, water-soluble complexes, in which the protein is biochemically stabilized. At variance with MP/detergent complexes, MP/APol ones remain stable even at extreme dilutions. Pure APol solutions self-associate into well-defined micelle-like globules comprising a few APol molecules, a rather unusual behavior for amphiphilic polymers, which typically form ill-defined assemblies. The best characterized APol to date, A8-35, is a random copolymer of acrylic acid, isopropylacrylamide, and octylacrylamide. In the present work, the concentration threshold for self-association of A8-35 in salty buffer (NaCl 100 mM, Tris/HCl 20 mM, pH 8.0) has been studied by Förster resonance energy transfer (FRET) measurements and tensiometry. In a 1:1 mol/mol mixture of APols grafted with either rhodamine or 7-nitro-1,2,3-benzoxadiazole, the FRET signal as a function of A8-35 concentration is essentially zero below a threshold concentration of 0.002 g·L(-1) and increases linearly with concentration above this threshold. This indicates that assembly takes place in a narrow concentration interval around 0.002 g·L(-1). Surface tension measurements decreases regularly with concentration until a threshold of ca. 0.004 g·L(-1), beyond which it reaches a plateau at ca. 30 mN·m(-1). Within experimental uncertainties, the two techniques thus yield a comparable estimate of the critical self-assembly concentration. The kinetics of variation of the surface tension was analyzed by dynamic surface tension measurements in the time window 10 ms-100 s. The rate of surface tension decrease was similar in solutions of A8-35 and of the anionic surfactant sodium dodecylsulfate when both compounds were at a similar molar concentration of n-alkyl moieties. Overall, the solution properties of APol "micelles" (in salty buffer) appear surprisingly similar to those of the micelles formed by small, nonpolymeric surfactants, a feature that was not anticipated owing to the polymeric and polydisperse nature of A8-35. The key to the remarkable stability to dilution of A8-35 globules, likely to include also that of MP/APol complexes, lies accordingly in the low value of the critical self-association concentration as compared to that of small amphiphilic analogues.

Equilibrium electrostatics of responsive polyelectrolyte monolayers

The physical behavior of polyelectrolytes at solid-liquid interfaces presents challenges both in measurement and in interpretation. An informative, yet often overlooked, property that characterizes the equilibrium organization of these systems is their membrane or rest potential. Here a general classification scheme is presented of the relationship between the rest potential and structural response of polyelectrolyte films to salt concentration. A numerical lattice theory, adapted from the polymer community, is used to analyze the rest potential response of end-tethered polyelectrolyte layers in which electrostatics and short-range contact interactions conspire to bring about different structural states. As an experimental quantity the rest potential is a readily accessible, nonperturbing metric of the equilibrium structure of a polyelectrolyte layer. A first set of measurements is reported on monolayers of end-tethered, single-stranded DNA in monovalent (NaCl) and divalent (MgCl(2)) counterion environments. Intriguingly, in NaCl electrolyte at least two different mechanisms appear by which the DNA layers can structurally relax in response to changing salt conditions. In MgCl(2) the layers appear to collapse. The possible molecular mechanisms behind these behaviors are discussed. These studies provide insight into phenomena more generally underlying polyelectrolyte applications in the chemical, environmental, and biotechnological fields.

Adsorption kinetics of amphiphilic diblock copolymers: from kinetically frozen colloids to macrosurfactants

We investigated the spontaneous adsorption properties of charged amphiphilic diblock copolymers on hydrophobic surfaces and explained the transition of behavior from depleting frozen colloids (that do not adsorb at all) to fast adsorbing macrosurfactants when the hydrophobicity of the nonsoluble block is reduced. Three copolymer families have been used with the same hydrophilic block poly(acrylic acid), a weak acid whose ionization alpha can be varied by changing the pH. The hydrophobic blocks polystyrene, PS, poly(n-butyl acrylate), PBA, and poly(diethylene glycol ethyl ether acrylate), PDEGA, have interfacial tensions with water gammacore/solvent, respectively, of 32, 20, and 3 mN/m. We were mainly interested in the regime of high ionization alpha > 0.3, where PAA chains have no affinity for hydrophobic surfaces, and we verified experimentally that micelles do not adsorb directly. With the three copolymer families we show that the adsorption kinetics at an early stage is driven by the self-assembly properties in bulk solution: adsorption is hampered for PS-b-PAA (physically/kinetically frozen micelles in solution), controlled by unimer extraction for PBA-b-PAA (nonequilibrium micelles in solution with very low CMC < 10-4 wt %), and controlled by unimer diffusion and electrostatic repulsion for PDEGA-b-PAA (micelles at equilibrium in solution with high CMC is approximately 1-5 wt %). This explains the power law dependences of adsorption with concentration as C-1 for PBA-b-PAA and C-2 for PDEGA-b-PAA. It is finally the interfacial tension with water of the nonsoluble block and not its glass transition that is the main control of bulk solution self-assembly and consequently of the adsorption kinetics properties of amphiphilic diblocks. We also proved by preparative GPC that the fraction of non-self-assembling diblock chains, which exists in all highly hydrophobic amphiphilic diblock systems, plays a negligible role in the adsorption properties. Finally, we investigated the intrinsic thermodynamic affinity between amphiphilic diblocks and hydrophobic surfaces. We show quantitatively that this affinity depends dominantly on the interfacial energies between the hydrophobic block, the surface, and water: diblocks with strongly hydrophobic nonsoluble blocks (PS, PBA) have a low affinity for weakly hydrophobic surfaces, and oppositely, diblocks with weakly hydrophobic nonsoluble block (PDEGA) have a universal affinity for hydrophobic surfaces (like small-molecule surfactants but for different physical reasons). Finally, we showed via surface rheology that when adsorption occurs anchoring is strong and irreversible for very hydrophobic diblocks (PBA-b-PAA) and weaker and (partially) reversible for less hydrophobic diblocks (PDEGA-b-PAA).

Adsorption of copolymers aggregates: from kinetics to adsorbed layer structure

We examined the adsorption, on hydrophobic and hydrophilic surfaces, of 4 rake-type poly(dimethyl siloxane) (PDMS) copolymers varying the amount of poly(ethylene glycol) (PEG) graft arms from 41 to 72%. The copolymers formed large aggregates in solution, complicating their adsorption kinetics and layer structures. We found the adsorption process always to be dominated by the adsorption of large aggregates, with strongly bound layers resistant to rinsing in adsorbing buffer. Adsorbed amounts were nearly independent of the substrate. However, subtleties in the adsorption kinetics suggested different layer structures for the different systems. On hydrophilic silica, aggregates adsorbed at the transport limited rate until surface saturation, and associated interfacial structures were likely retained. On the hydrophobic surface, a subset of the copolymers exhibited retarded late stage adsorption kinetics suggestive of brush formation. This work demonstrates how subtle differences in adsorption kinetics provide insight into potential interfacial layer structures.