Highly Bright and Efficient Electroluminescence of New PPV Derivatives Containing Polyhedral Oligomeric Silsesquioxanes (POSSs) and Their Blends

Unveiling the Different Emission Behavior of Polytriazoles Constructed from Pyrazine-Based AIE Monomers by Click Polymerization

Polymers with aggregation-induced emission (AIE) characteristics have aroused tremendous interest because of their potential applications in large-area flexible display and luminescent self-assembling, and as stimuli-responsive and porous materials. However, the design of AIE-active polymers is always not as easy as that of small molecules because their properties are hard to predict. In some cases, the polymers prepared from the AIE-active monomers show the aggregation-caused quenching (ACQ) instead of AIE effect. To understand the structure-property relationship of the polymers constructed from the AIE monomers, in this paper, two pyrazine-containing AIE monomers were utilized to construct luminescent polymers by click polymerization. The photophysical property investigation indicates that the polytriazole containing tetraphenylpyrazine units is AIE-active, whereas that bearing 2,3-dicyano-5,6-diphenylpyrazine units suffers from the ACQ effect. Through systematical investigation, the cause for such difference was unveiled. Thus, this work provides a useful guidance for further design of AIE-active polymers.

Synthesis of Monofunctionalized Silsesquioxanes (RSiMe2 O)(iBu)7 Si8 O12 via Alkene Hydrosilylation

The research presented in this work comprehensively describes hydrosilylation of a wide spectrum of alkenes which contain one or more reactive groups with (HSiMe₂ O)(iBu)₇ Si₈ O₁₂ , in the presence of different types of catalysts. Special attention is paid to the influence of alkene, catalyst, and reaction conditions on process effectiveness and selectivity by the precise monitoring of the experiments with in situ FTIR and NMR spectroscopies. More than twenty silsesquioxanes bearing reactive groups (OH, Br, NR₂ , CO, COOR, NCO, epoxy, SiR₃ ) commonly used in organic and polymer chemistry, were obtained, isolated and characterized by ¹ H, ¹³ C, ²⁹ Si NMR and MALDI TOF. Importantly, in the presented syntheses, commercially available reagents and catalysts were used, meaning that the presented methods could be easily repeated, rapidly scaled up, and widely applied.

Influence of polyhedral oligomeric silsesquioxanes (POSS) on the luminescence properties of non-conjugated copolymers based on iridium complex and carbazole units

The non-conjugated copolymers with the carrier-transporting carbazole units, phosphorescence iridium complex units and nano-scale particles POSS were synthesized. The effects of POSS on the performance of copolymer hybrid materials were investigated.

A novel electroluminescent PPV copolymer and silsesquioxane nanocomposite film for the preparation of efficient PLED devices

Polymer light-emitting diodes (PLEDs) have attracted growing interest in recent years for their potential use in displays and lighting fields. Nevertheless, PLED devices have some disadvantages in terms of low optoelectronic efficiency, high cost, short lifetimes and low thermal stability, which limit their final applications. Huge efforts have been made recently to improve the performances of these devices. The addition of inorganic or hybrid organic-inorganic nanoparticles to the light-emitting polymers, for example, allows their thermal stability and electroluminescent efficiency to be increased. Following this approach, novel PLED devices based on composite films of PPV-derivative copolymer (commercial name Super Yellow, SY) and octaisobutil POSS, were developed in this study. The device containing Super Yellow loaded with 1 wt% of POSS showed higher efficiency (ca. +30%) and improved lifetime in comparison to PLED prepared with the pure electroluminescent polymer. The PLED devices developed in this study are suitable candidates for automotive dashboards and, in general, for lighting applications.

Hepta(3,3,3-trifluoropropyl) polyhedral oligomeric silsesquioxane-capped poly(N-isopropylacrylamide) telechelics: synthesis and behavior of physical hydrogels

Hepta(3,3,3-trifluoropropyl) polyhedral oligomeric silsesquioxane (POSS)-capped poly(N-isopropylacrylamide) (PNIPAAm) telechelics with variable lengths of PNIPAAm midblocks were synthesized by the combination of reversible addition-fragmentation chain transfer polymerization (RAFT) and the copper-catalyzed Huisgen 1,3-cycloaddition (i.e., click chemistry). The POSS-capped trithiocarbonate was synthesized and used as the chain transfer agent for the RAFT polymerization of N-isopropylacrylamide. The organic-inorganic amphiphilic telechelics were characterized by means of nuclear magnetic resonance spectroscopy (NMR) and gel permeation chromatography (GPC). Atomic force microscopy (AFM) shows that all the POSS-capped PNIPAAm telechelics exhibited microphase-separated morphologies, in which the POSS terminal groups were self-assembled into the microdomains and dispersed into the continuous PNIPAAm matrices. The POSS nanodomains could behave as the physical cross-linking sites and as a result the physical hydrogels were formed while these POSS-capped PNIPAAm telechelics were subjected to the solubility tests with water. These physical hydrogels possessed well-defined volume phase transition phenomena and displayed rapid reswelling and deswelling thermoresponsive behavior compared to control PNIPAAm hydrogel.

Preparation of high-quality organic semiconductor nanoparticle films by solvent-evaporation-induced self-assembly

Organic semiconductor nanoparticles are expected to be used in organic optical and electronic devices due to their unique optical and electrical properties. However, no method has been reported for the preparation of high-quality organic nanoparticle films without remaining additives and being capable of dealing with binary nanoparticle blends. We developed a simple approach to fabricate high-quality organic semiconductor nanoparticle films from their aqueous solutions by solvent-evaporation-induced self-assembly. Only volatile solvents are employed in the nanoparticle solutions, so the self-assembled nanoparticle films are free of additives. Moreover, this method is also suitable for fabricating thin films containing binary nanoparticles. Therefore, it paves the way for potential applications of organic semiconductor nanoparticles in nanoscale optical and electronic devices.