In-Situ Direct Mechanistic Transformation from RAFT to Living Cationic Polymerization for (Meth)acrylate−Vinyl Ether Block Copolymers

Orthogonal Radical and Cationic Single-Unit Monomer Insertions for Engineering Polymer Architectures

The single-unit monomer insertion (SUMI), derived from living/controlled polymerization, can be directly functionalized at the end or within the chain of polymers prepared by living/controlled polymerization, offering potential applications in the preparation of polymers with complex architectures. Many scenarios demand the simultaneous incorporation of monomers suitable for different polymerization methods into complex polymers. Therefore, it becomes imperative to utilize SUMI technologies with diverse mechanisms, especially those that are compatible with each other. Here, we reported the orthogonal SUMI technique, seamlessly combining radical and cationic SUMI approaches. Through the careful optimization of monomer and chain transfer agent pairs and adjustments to reaction conditions, we can efficiently execute both radical and cationic SUMI processes in one pot without mutual interference. The utilization of orthogonal SUMI pairs facilitates the integration of radical and cationic reversible addition-fragmentation chain transfer (RAFT) polymerization in various configurations. This flexibility enables the synthesis of diblock, triblock, and star polymers that incorporate both cationically and radically polymerizable monomers. Moreover, we have successfully implemented a mixing mechanism of free radicals and cations in RAFT step-growth polymerization, resulting in the creation of a side-chain sequence-controlled polymer brushes.

Ultrasensitive miRNA-21 Biosensor Based on Zn(TCPP) PET-RAFT Polymerization Signal Amplification and Multiple Logic Gate Molecular Recognition

Quantitative measurement of microRNAs (miRNAs) is extremely important in plenty of biomedical applications especially cancer diagnosis but remains a great challenge. In this work, we developed a logic gate recognition biosensing platform based on the "trinity" molecular recognition mode for quantifying miRNAs with a detection limit of 4.48 aM, along with a linear range from 0.1 nM to 10 aM under optimal experimental conditions. In order to obtain excellent detection performance, we adopted a Zn(TCPP) photocatalytic electron transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization signal amplification strategy. The light-induced PET-RAFT has developed green applications of free radical polymerization in the field of biosensors. This is the first report on the preparation of signal amplification biosensors using PET-RAFT for tumor marker detection. With the outstanding detection performance, we can apply the sensor system to the early screening of lung cancer patients.

Linear Block Copolymer Synthesis

Block copolymers form the basis of the most ubiquitous materials such as thermoplastic elastomers, bridge interphases in polymer blends, and are fundamental for the development of high-performance materials. The driving force to further advance these materials is the accessibility of block copolymers, which have a wide variety in composition, functional group content, and precision of their structure. To advance and broaden the application of block copolymers will depend on the nature of combined segmented blocks, guided through the combination of polymerization techniques to reach a high versatility in block copolymer architecture and function. This review provides the most comprehensive overview of techniques to prepare linear block copolymers and is intended to serve as a guideline on how polymerization techniques can work together to result in desired block combinations. As the review will give an account of the relevant procedures and access areas, the sections will include orthogonal approaches or sequentially combined polymerization techniques, which increases the synthetic options for these materials.

Synthesis of Block Copolymers by Mechanistic Transformation from Reversible Complexation Mediated Living Radical Polymerization to the Photoinduced Radical Oxidation/Addition/Deactivation Process

A versatile strategy for the fabrication of block copolymers by the combination of two discrete living polymerization techniques─reversible complexation mediated living radical polymerization (RCMP) and photoinduced radical oxidation addition deactivation (PROAD) processes─is reported. First, RCMP is conducted to yield poly(methyl methacrylate) with iodide end groups (PMMA-I). In the following step, PMMA-I is used as macroinitiator for living PROAD cationic polymerization of isobutyl vinyl ether. Successful formation of the block copolymers is confirmed by ¹H NMR, FT-IR, GPC, and DSC investigations.

Acridinium salts as photoredox organocatalysts for photomediated cationic RAFT and DT polymerizations of vinyl ethers

A series of acridinium salts with high excited-state oxidative power are employed as photoredox organocatalysts for photomediated cationic RAFT and DT polymerizations under visible light.

One-pot synthesis of structure-controlled temperature-responsive polymer gels

The simultaneous use of metal Lewis acids and photo-radical generators for dithioesters, which are the common dormant species for cationic and radical polymerization, made it possible to convert a cationic species into a radical by photoirradiation.

Thiocarbonyl Chemistry in Polymer Science

Organised by reaction type, this review highlights the unique reactivity of thiocarbonyl (C=S) groups with radicals, anions, nucleophiles, electrophiles, in pericyclic reactions, and in the presence of light. In the...

The influence of thiocarbonylthio compounds on the B(C6F5)3 catalyzed cationic polymerization of styrene

When applied to the cationic polymerization of styrene, thiocarbonylthio compounds can lead to a dual control mechanism, where degenerative chain transfer occurs concurrent with a reversible addition mechanism.

Controlled Cationic Polymerization Using RAFT Agents with Selenonium Cations as Metal-Free Lewis Acids: From Homogeneous to Heterogeneous Catalysis

Living cationic polymerization is a well-known technique, but it is generally limited by strict operating conditions. Here, a series of selenonium cations was used as a new class of catalysts...

Interconvertible Living Radical and Cationic Polymerization using a Dual Photoelectrochemical Catalyst

The necessity of well-tuned reactivity for successful controlled polymer synthesis often comes with the price of limited monomer substrate scope. We demonstrate here the on-demand interconversion between living radical and cationic polymerization using two orthogonal stimuli and a dual responsive single catalyst. The dual photo- and electrochemical reactivity of 10-phenylphenothiazine catalyst provides control of the polymer's molar mass and composition by orthogonally activating the common dormant species toward two distinct chemical routes. This enables the synthesis of copolymer chains that consist of radically and cationically polymerized segments where the length of each block is controlled by the duration of the stimulus exposure. By alternating the application of photochemical and electrochemical stimuli, the on-demand incorporation of acrylates and vinyl ethers is achieved without compromising the end-group fidelity or dispersity of the formed polymer. The results provide a proof-of-concept for the ability to substantially extend substrate scope for block copolymer synthesis under mild, metal-free conditions through the use of a single, dual reactive catalyst.

Controlling Polymer Molecular Weight Distribution through a Latent Mediator Strategy with Temporal Programming

Polymer molecular weight distribution (MWD) is a key parameter of polymers. Here we present a robust method for controlling polymer MWD in controlled cationic polymerizations. A latent mediator strategy was designed and combined with temporal programming to regenerate mediators at different times during polymerization. Both the breadths and shapes of MWD curves were tuned easily by adjusting an external light source. Bimodal, trimodal, and tetramodal distributions were obtained, and the breadths could be varied from 1.06 to 2.09. Polymers with different MWDs prepared by this method had good chain end fidelity, which was demonstrated with successful chain-extension experiments. In addition, the introduction of temporal programming with a computer-controlled single chip for the light source opened an avenue for the use of artificial intelligence in polymer synthesis.

Hybridization of Step-/Chain-Growth and Radical/Cationic Polymerizations Using Thioacetals as Key Components for Triblock, Periodic and Random Multiblock Copolymers with Thermoresponsiveness

A novel strategy for synthesizing a series of multiblock copolymers is developed by combining radical/cationic step-growth polymerizations of dithiols and divinyl ethers and chain-growth cationic degenerative chain-transfer (DT) polymerizations of vinyl ethers using thioacetals as key components. The combination of radical step-growth polymerization and a cationic thiol-ene reaction or cationic step-growth polymerization enables the synthesis of a series of macro chain-transfer agents (CTAs) composed of poly(thioether) and thioacetal groups at different positions. The resulting products are 1) bifunctional macro CTAs with thioacetal groups at both chain ends, 2) periodic macro CTAs periodically having thioacetal groups in the main chain, and 3) random macro CTAs randomly having thioacetal groups in the main chain. Subsequently, the obtained macro CTAs are used for chain-growth cationic DT polymerization of methoxyethyl vinyl ether (MOVE) to result in 1) triblock, 2) periodic, and 3) random multiblock copolymers consisting of poly(thioether) and poly(MOVE) segments. All these triblock and multiblock copolymers composed of hydrophobic poly(thioether) and hydrophilic poly(MOVE) segments show an amphiphilic tendency to form characteristic micelles in aqueous solutions. In addition, due to the thermoresponsive poly(MOVE) segments, the obtained copolymers exhibit lower critical solution temperatures that depend on the segment sequences and lengths.

Merging of cationic RAFT and radical RAFT polymerizations with ring-opening polymerizations for the synthesis of asymmetric ABCD type tetrablock copolymers in one pot

A new bifunctional and switchable RAFT agent and a mechanism switching strategy were proposed to control the cationic RAFT polymerization, radical RAFT polymerization and ring-opening polymerization of vinyl and cyclic ester monomers and to produce block copolymers.

An eco-friendly pathway to thermosensitive micellar nanoobjects via photoRAFT PISA: the full guide to poly(N-acryloylpyrrolidin)-block-polystyrene diblock copolymers

Spherical macromolecular assemblies, so-called latexes, consisting of polystyrene (PS) resemble a relevant class of synthetic polymers used for a plethora of applications ranging from coatings or lubricants to biomedical applications. Their synthesis is usually tailored to the respective application where emulsifiers, radical initiators, or other additives still play a major role in achieving the desired properties. Herein, we demonstrate an alternative based on the photoiniferter reversible addition-fragmentation chain transfer (RAFT) polymerization-induced self-assembly (PISA) of Poly(N-acryloylpyrrolidin)-block-polystyrene (PAPy-b-PS). This approach yields monodisperse nanospheres with tunable sizes based on an aqueous formulation with only two ingredients. These nanospheres are additionally thermosensitive, meaning that they change their hydrodynamic diameter linearly with the temperature in a broad range between 10 °C and 70 °C. Combined with the eco-friendly synthesis in pure water at 40 °C, the herein presented route constitutes an unprecedented pathway to thermosensitive diblock copolymer aggregates in short reaction times without any additives.

Manganese carbonyl induced cationic reversible addition–fragmentation chain transfer (C-RAFT) polymerization under visible light

Vinyl ethers were polymerized by C-RAFT polymerization on the basis of halide abstraction reaction of manganese carbonyl and organic halide.

Lewis acid-surfactant complex catalyzed polymerization in aqueous dispersed media: cationic or radical polymerization?

Evidence is presented that shows Lewis acid-surfactant complex catalyzed polymerization proceeds via a radical, not a cationic, mechanism.

Cationic copolymerization of isosorbide towards value-added poly(vinyl ethers)

Biomass-derived isosorbide (IS) was converted into a mono-glycal (i.e. vinyl ether) derivative (Gly-IS) to investigate its efficacy for cationic polymerization.

Polymerization of Polar Monomers Mediated by Main-Group Lewis Acid-Base Pairs

The development of new or more sustainable, active, efficient, controlled, and selective polymerization reactions or processes continues to be crucial for the synthesis of important polymers or materials with specific structures or functions. In this context, the newly emerged polymerization technique enabled by main-group Lewis pairs (LPs), termed as Lewis pair polymerization (LPP), exploits the synergy and cooperativity between the Lewis acid (LA) and Lewis base (LB) sites of LPs, which can be employed as frustrated Lewis pairs (FLPs), interacting LPs (ILPs), or classical Lewis adducts (CLAs), to effect cooperative monomer activation as well as chain initiation, propagation, termination, and transfer events. Through balancing the Lewis acidity, Lewis basicity, and steric effects of LPs, LPP has shown several unique advantages or intriguing opportunities compared to other polymerization techniques and demonstrated its broad polar monomer scope, high activity, control or livingness, and complete chemo- or regioselectivity, as well as its unique application in materials chemistry. These advances made in LPP are comprehensively reviewed, with the scope of monomers focusing on heteroatom-containing polar monomers, while the polymerizations mediated by main-group LAs and LBs separately that are most relevant to the LPP are also highlighted or updated. Examples of applying the principles of the LPP and LP chemistry as a new platform for advancing materials chemistry are highlighted, and currently unmet challenges in the field of the LPP, and thus the suggested corresponding future research directions, are also presented.

On Demand Switching of Polymerization Mechanism and Monomer Selectivity with Orthogonal Stimuli

The development of next-generation materials is coupled with the ability to predictably and precisely synthesize polymers with well-defined structures and architectures. In this regard, the discovery of synthetic strategies that allow on demand control over monomer connectivity during polymerization would provide access to complex structures in a modular fashion and remains a grand challenge in polymer chemistry. In this Article, we report a method where monomer selectivity is controlled during the polymerization by the application of two orthogonal stimuli. Specifically, we developed a cationic polymerization where polymer chain growth is controlled by a chemical stimulus and paired it with a compatible photocontrolled radical polymerization. By alternating the application of the chemical and photochemical stimuli the incorporation of vinyl ethers and acrylates could be dictated by switching between cationic and radical polymerization mechanisms, respectively. This enables the synthesis of multiblock copolymers where each block length is governed by the amount of time a stimulus is applied, and the quantity of blocks is determined by the number of times the two stimuli are toggled. This new method allows on demand control over polymer structure with external influences and highlights the potential for using stimuli-controlled polymerizations to access novel materials.

Electro-Controlled Living Cationic Polymerization

Cationic polymerizations have long been industrialized; however, stimulus-regulated cationic polymerization remains to be developed. An electrochemically controlled living cationic polymerization is presented for the first time. In the presence of external potential and organic-based electrocatalyst, a series of monomers can be polymerized under a cationic chain-transfer mechanism. The resulting polymers exhibit well-defined molecular mass, narrow dispersity, and good chain-end fidelity. By controlling the external potential to switch the electrocatalyst between its oxidized and reduced states, ON/OFF polymerization can be achieved. This method is a versatile way to a large range of monomers, including vinyl ether-type and p-substituted styrene-type monomers. Given the sustainability feature and broad interest of electrochemical synthetic techniques, we envisaged that this method would lead a new direction of external regulated living ionic polymerization.

Recent Advances in RAFT Polymerization: Novel Initiation Mechanisms and Optoelectronic Applications

Reversible addition-fragmentation chain transfer (RAFT) is considered to be one of most famous reversible deactivation radical polymerization protocols. Benefiting from its living or controlled polymerization process, complex polymeric architectures with controlled molecular weight, low dispersity, as well as various functionality have been constructed, which could be applied in wide fields, including materials, biology, and electrology. Under the continuous research improvement, main achievements have focused on the development of new RAFT techniques, containing fancy initiation methods (e.g., photo, metal, enzyme, redox and acid), sulfur-free RAFT system and their applications in many fields. This review summarizes the current advances in major bright spot of novel RAFT techniques as well as their potential applications in the optoelectronic field, especially in the past a few years.

One-shot controlled/living copolymerization for various comonomer sequence distributions via dual radical and cationic active species from RAFT terminals

One-shot control of comonomer sequence distributions was demonstrated by dual radical and cationic copolymerization using RAFT mediator.

Beyond Traditional RAFT: Alternative Activation of Thiocarbonylthio Compounds for Controlled Polymerization

Recent developments in polymerization reactions utilizing thiocarbonylthio compounds have highlighted the surprising versatility of these unique molecules. The increasing popularity of reversible addition-fragmentation chain transfer (RAFT) radical polymerization as a means of producing well-defined, 'controlled' synthetic polymers is largely due to its simplicity of implementation and the availability of a wide range of compatible reagents. However, novel modes of thiocarbonylthio activation can expand the technique beyond the traditional system (i.e., employing a free radical initiator) pushing the applicability and use of thiocarbonylthio compounds even further than previously assumed. The primary advances seen in recent years are a revival in the direct photoactivation of thiocarbonylthio compounds, their activation via photoredox catalysis, and their use in cationic polymerizations. These synthetic approaches and their implications for the synthesis of controlled polymers represent a significant advance in polymer science, with potentially unforeseen benefits and possibilities for further developments still ahead. This Research News aims to highlight key works in this area while also clarifying the differences and similarities of each system.

A well-defined block copolymer synthesis via living cationic polymerization and nitroxide-mediated polymerization using carboxylic acid-based alkoxyamines as a dual initiator

A series of carboxylic acid-based alkoxyamines associated with SnBr₄, a Lewis acid, have been used as protonic acids of a binary initiating system to control the cationic polymerization of vinyl ether.