RAFT Polymerization under Microwave Irradiation: Toward Mechanistic Understanding

Evolution of Molar Mass Distributions Using a Method of Partial Moments: Initiation of RAFT Polymerization

We describe a method of partial moments devised for accurate simulation of the time/conversion evolution of polymer composition and molar mass. Expressions were derived that enable rigorous evaluation of the complete molar mass and composition distribution for shorter chain lengths (e.g., degree of polymerization, Xn = N < 200 units) while longer chains (Xn ≥ 200 units) are not neglected, rather they are explicitly considered in terms of partial moments of the molar mass distribution, μxN(P)=∑n=N+1∞nx[Pn] (where P is a polymeric species and n is its’ chain length). The methodology provides the exact molar mass distribution for chains Xn < N, allows accurate calculation of the overall molar mass averages, the molar mass dispersity and standard deviations of the distributions, provides closure to what would otherwise be an infinite series of differential equations, and reduces the stiffness of the system. The method also allows for the inclusion of the chain length dependence of the rate coefficients associated with the various reaction steps (in particular, termination and propagation) and the various side reactions that may complicate initiation or initialization. The method is particularly suited for the detailed analysis of the low molar mass portion of molar mass distributions of polymers formed by radical polymerization with reversible addition-fragmentation chain transfer (RAFT) and is relevant to designing the RAFT-synthesis of sequence-defined polymers. In this paper, we successfully apply the method to compare the behavior of thermally initiated (with an added dialkyldiazene initiator) and photo-initiated (with a RAFT agent as a direct photo-iniferter) RAFT-single-unit monomer insertion (RAFT-SUMI) and oligomerization of N,N-dimethylacrylamide (DMAm).

Quantitative evaluation of the non-thermal effect in microwave induced polymer curing

Microwave irradiation is one of the most effective strategies to accelerate the curing of resin. However, the mechanism is still unclear. The debates mainly focus on how to quantitatively evaluate the ‘non-thermal’ effect of the microwave. In this work, the non-thermal effect on DGEBA with amine (D230) and anhydride (MHHPA) hardeners respectively was evaluated via an isothermal microwave curing reactor. The ‘thermal effect’ caused by the microwave was peeled off accurately. Iso-conversional kinetic analysis was performed based on the reaction extent from the real time FTIR spectrum, and the apparent activation energy (E_a) was calculated for the quantitative evaluation of the microwave non-thermal effect. The influence caused by the polarized functional groups, reaction temperature and the transition state were explored, and the microwave non-thermal effect on the mechanical performance of the cured thermosets was evaluated. Results indicated that the microwave non-thermal effect was able to reduce the E_a and accelerate the curing speed of epoxy resin. At the same time, the final curing extent was increased when the non-thermal effect of microwave was induced leading to enhanced mechanical and thermal performance.

The non-thermal effect of microwave was evaluated quantitatively by the calculation of activation energy and pre-exponential factors with an isothermal microwave.

Role of External Field in Polymerization: Mechanism and Kinetics

The past decades have witnessed an increasing interest in developing advanced polymerization techniques subjected to external fields. Various physical modulations, such as temperature, light, electricity, magnetic field, ultrasound, and microwave irradiation, are noninvasive means, having superb but distinct abilities to regulate polymerizations in terms of process intensification and spatial and temporal controls. Gas as an emerging regulator plays a distinctive role in controlling polymerization and resembles a physical regulator in some cases. This review provides a systematic overview of seven types of external-field-regulated polymerizations, ranging from chain-growth to step-growth polymerization. A detailed account of the relevant mechanism and kinetics is provided to better understand the role of each external field in polymerization. In addition, given the crucial role of modeling and simulation in mechanisms and kinetics investigation, an overview of model construction and typical numerical methods used in this field as well as highlights of the interaction between experiment and simulation toward kinetics in the existing systems are given. At the end, limitations and future perspectives for this field are critically discussed. This state-of-the-art research progress not only provides the fundamental principles underlying external-field-regulated polymerizations but also stimulates new development of advanced polymerization methods.

Modeling of RAFT polymerization of MMA in supercritical carbon dioxide using the PC-SAFT equation of state

The PC-SAFT equation of state was applied to the study of RAFT polymerization of methyl methacrylate in supercritical CO₂.

Light and magnetism dual-gated photoinduced electron transfer-reversible addition–fragmentation chain transfer (PET-RAFT) polymerization

PET-RAFT polymerization can be reversibly ceased in the absence of light or under an external magnetic field with a novel raspberry-like γ-Fe₂O₃@CD nanocatalyst.

Non-thermal microwave effects in radical polymerization of bio-based terpenoid (meth)acrylates

Non-thermal microwave effects are operative for terpenoid acrylates but not for methacrylates, provided that a minimum irradiation power is applied.

Visible light controlled aqueous RAFT continuous flow polymerization with oxygen tolerance

A fast visible light controlled RAFT polymerization system without the prior removal of oxygen was successfully carried out in a continuous tubular reactor with water as a green solvent.

Preparation of Functional Monomers as Precursors of Bioprobes from a Common Styrene Derivative and Polymer Synthesis

CM-Str (4-(Chloromethyl)styrene) was used as a useful starting material for the construction of a series of functional monomers. Substitution of the chlorine to the corresponding azide was performed, and the reduction of the azide proceeded smoothly to afford an aminostyrene, which was used as a common precursor for the preparation of functional monomers. Condensation of the amine with a fluorophore, biotin and carbohydrate was accomplished. Among the monomers, a carbohydrate monomer was polymerized with or without acrylamide as a model polymerization to yield the corresponding water-soluble glycopolymers, and biological evaluations of the glycopolymers for a lectin, and wheat germ agglutinin (WGA), were carried out on the basis of the fluorescence change of tryptophan in the WGA.

PET-RAFT polymerisation: towards green and precision polymer manufacturing

Photoinduced electron/energy transfer-reversible addition–fragmentation chain transfer (PET-RAFT) process has opened up a new way of precision polymer manufacturing to satisfy the concept of green chemistry.

Photoinitiated Polymerization-Induced Self-Assembly (Photo-PISA): New Insights and Opportunities

The polymerization-induced self-assembly (PISA) process is a useful synthetic tool for the efficient synthesis of polymeric nanoparticles of different morphologies. Recently, studies on visible light initiated PISA processes have offered a number of key research opportunities that are not readily accessible using traditional thermally initiated systems. For example, visible light mediated PISA (Photo-PISA) enables a high degree of control over the dispersion polymerization process by manipulation of the wavelength and intensity of incident light. In some cases, the final nanoparticle morphology of a single formulation can be modulated by simple manipulation of these externally controlled parameters. In addition, temporal (and in principle spatial) control over the Photo-PISA process can be achieved in most cases. Exploitation of the mild room temperature polymerizations conditions can enable the encapsulation of thermally sensitive therapeutics to occur without compromising the polymerization rate and their activities. Finally, the Photo-PISA process can enable further mechanistic insights into the morphological evolution of nanoparticle formation such as the effects of temperature on the self-assembly process. The purpose of this mini-review is therefore to examine some of these recent advances that have been made in Photo-PISA processes, particularly in light of the specific advantages that may exist in comparison with conventional thermally initiated systems.

Microwave-Accelerated Rapid, Chemical Oxidant-Free, Material-Independent Surface Chemistry of Poly(dopamine)

A simple strategy for the rapid preparation of multifunctional polydopamine (pDA) coatings is demonstrated. Microwave irradiation of the coating solution enables the formation of a ≈18 nm thick, genuine pDA coating in 15 min, which is ≈18 times faster than conventional coating. The acceleration effect results from the radical generation and temperature increase, which facilitate thermally accelerated radical polymerization of dopamine.

Natural RAFT Polymerization: Recyclable-Catalyst-Aided, Opened-to-Air, and Sunlight-Photolyzed RAFT Polymerizations

The successful sunlight-photolyzed reversible addition-fragmentation chain transfer (RAFT) photopolymerization can be reversibly activated and deactivated by irradiation with sunlight in the absence of photocatalyst and photoinitiator. In the present work, the thiocarbonylthio compounds (dithiobenzoate, trithiocarbonate, and xanthate) can all be employed to carry out the polymerization under sunlight irradiation acting as an initiator, chain transfer agent, and termination agent. Moreover, it was demonstrated that the recyclable-catalyst-aided, opened-to-air, and sunlight-photolyzed RAFT (ROS-RAFT) polymerizations can be successfully carried out to fabricate precise and predictable polymers in the presence of the recyclable magnetic semiconductor nanoparticles (NPs). The oxygen tolerance is likely attributed to a specific interaction between NPs and oxygen.

Probing the surface-localized hyperthermia of gold nanoparticles in a microwave field using polymeric thermometers

Gold nanoparticles decorated with “polymeric thermometers,” consisting of a polymeric spacer, thermally-labile azo linker, and fluorescent tag, were used to quantify the extent of localized hyperthermia under microwave irradiation.

The surface-localized hyperthermia of gold nanoparticles under microwave irradiation was examined. Gold nanoparticles with a hydrodynamic diameter of ∼6 nm stabilized by polymeric “thermometers” were used to gather information on the extent of heating as well as its spatial confinements. Reversible addition–fragmentation chain transfer polymerization was employed to synthesize well-defined, functional polymers of predetermined molecular weights, allowing for estimation of the distance between the nanoparticle surface and the polymer chain end. The polymers were conjugated with a fluorescent dye separated by a thermally-labile azo linkage, and these polymeric ligands were bound to gold nanoparticles via gold–thiolate bonds. Conventional heating experiments elucidated the relationship between temperature and the extent of dye release from the gold nanoparticle using fluorescence spectroscopy. The local temperature increase experienced under microwave irradiation was calculated using the same methodology. This approach indicated the temperature near the surface of the nanoparticle was nearly 70 °C higher than the bulk solution temperature, but decreased rapidly with distance, with no noticeable temperature increase when the azo linkage was approximately 2 nm away.

Model-based design of the polymer microstructure: bridging the gap between polymer chemistry and engineering

A state-of-the-art review is presented on model-based design for next-generation polymer synthesis and modification.

Microwave-assisted solution polycondensation of l-lactic acid using a Dean–Stark apparatus for a non-thermal microwave polymerization effect induced by the electric field

The solution polycondensation of l-lactic acid (l-LA) in xylene catalyzed by Sc(OTf)₃ was examined using a Dean–Stark apparatus under various microwave power conditions (100–400 W). The results indicate the existence of a non-thermal microwave effect induced by an electric field.

Fundamentals of RAFT Polymerization

This chapter sets out to describe the fundamental aspects of radical polymerization with reversible addition-fragmentation chain transfer (RAFT polymerization). Following a description of the mechanism we describe aspects of the kinetics of RAFT polymerization, how to select a RAFT agent to achieve optimal control over polymer molecular weight, composition and architecture, and how to avoid side reactions which might lead to retardation or inhibition.