Phototunable LCST of Water-Soluble Polymers: Exploring a Topological Effect

Photoreactive silver-containing supramolecular polymers that form self-assembled nanogels for efficient antibacterial treatment

In this study, an efficient synthetic strategy and potential route to obtain a photo-reactive silver-containing cytosine-functionalized polypropylene glycol polymer (Ag-Cy-PPG) was developed by combining a hydrophilic oligomeric polypropylene glycol (PPG) backbone with dual pH-sensitive/photo-reactive cytosine-silver-cytosine (Cy-Ag-Cy) linkages. The resulting photo-responsive Ag-Cy-PPG holds great promise as a multifunctional biomedical material that generates spherical-like nanogels in water; the nanogels exhibit high antibacterial activity and thus may significantly enhance the efficacy of antibacterial treatment. Due to the formation of photo-dimerized Cy-Ag-Cy cross-linkages after UV irradiation, Ag-Cy-PPG converts into water-soluble cross-linked nanogels that possess a series of interesting chemical and physical properties, such as intense and stable fluorescence behavior, highly sensitive pH-responsive characteristics, on/off switchable phase transition behavior, and well-controlled release of silver ions (Ag+) in mildly acidic aqueous solution. Importantly, antibacterial tests clearly demonstrated that irradiated Ag-Cy-PPG nanogels exhibited strong antibacterial activity at low doses (MIC values of < 50 μg/mL) against gram-positive and gram-negative bacterial pathogens, whereas non-irradiated Ag-Cy-PPG nanogels did not inhibit the viability of bacterial pathogens. These results indicate that irradiated Ag-Cy-PPG nanogels undergo a highly sensitive structural change in the bacterial microenvironment due to their relatively unstable π-conjugated structures (compared to non-irradiated nanogels); this change results in a rapid structural response that promotes intracellular release of Ag+ and induces potent antibacterial ability. Overall, this newly created metallo-supramolecular system may potentially provide an efficient route to dramatically enhance the therapeutic effectiveness of antibacterial treatments.

Topological transformation across different dimensions of supramolecular polymer via photo-isomerization

Herein, we report a novel topological transformable supramolecular polymer capable of converting its architecture from a two-dimensional to a one-dimensional structure. The transformative process is achieved by the precise control of the steric configuration of constituent monomers via photo-isomerization.

Photoreactive Cytosine-Functionalized Self-Assembled Micelles with Enhanced Cellular Uptake Capability for Efficient Cancer Chemotherapy

Design, fabrication, and control of photoreactive supramolecular macromers─which are composed of a thermoresponsive polymer backbone and photoreactive nucleobase end-groups─to achieve the desired physical-chemical performance and provide the high efficiency required for chemotherapy drug delivery purposes still present challenges. Herein, a difunctional cytosine-terminated supramolecular macromer was successfully obtained at high yield. UV-irradiation induces the formation of cytosine photodimers within the structure. The irradiated macromer can self-assemble into nanosized spherical micelles in water that possess a number of interesting and unique features, such as desired micellar size and morphology, tunable drug-loading capacity, and excellent structural stability in serum-containing medium, in addition to well-controlled drug-release behaviors in response to changes in environmental temperature and pH; these extremely desirable, rare features are required to augment the functions of polymeric nanocarriers for drug delivery. Importantly, a series of in vitro studies demonstrated that photodimerized cytosine moieties within the drug-loaded micelles substantially enhance their internalization and accumulation inside cells via endocytosis and subsequently lead to induction of massive apoptotic cell death compared with the corresponding nonirradiated micelles. Thus, this newly developed "photomodified" nanocarrier system could provide a potentially fruitful route to enhance the drug delivery performance of nanocages without the need to introduce targeting moieties or additional components.

Thermo- and Photoresponsive Behaviors of Dual-Stimuli-Responsive Organogels Consisting of Homopolymers of Coumarin-Containing Methacrylate

Coumarin-containing vinyl homopolymers, such as poly(7-methacryloyloxycoumarin) (P1a) and poly(7-(2'-methacryloyloxyethoxy)coumarin) (P1b), show a lower critical solution temperature (LCST) in chloroform, which can be controlled by the [2 + 2] photochemical cycloaddition of the coumarin moiety, and they are recognized as monofunctional dual-stimuli-responsive polymers. A single functional group of monofunctional dual-stimuli-responsive polymers responds to dual stimuli and can be introduced more uniformly and densely than those of dual-functional dual-stimuli-responsive polymers. In this study, considering a wide range of applications, organogels consisting of P1a and P1b, i.e., P1a-gel and P1b-gel, respectively, were synthesized, and their thermo- and photoresponsive behaviors in chloroform were investigated in detail. P1a-gel and P1b-gel in a swollen state (transparent) exhibited phase separation (turbid) through a temperature jump and reached a shrunken state (transparent), i.e., an equilibrium state, over time. Moreover, the equilibrium degree of swelling decreased non-linearly with increasing temperature. Furthermore, different thermoresponsive sites were photopatterned on the organogel through the photodimerization of the coumarin unit. The organogels consisting of homopolymers of coumarin-containing methacrylate exhibited unique thermo- and photoresponsivities and behaved as monofunctional dual-stimuli-responsive organogels.

Delineating synchronized control of dynamic covalent and non-covalent interactions for polymer chain collapse towards cargo localization and delivery

Synergistic control of photo-responsive dynamic covalent and non-covalent interaction over the chain collapse of single chain thermo-responsive polymers towards cargo localization and augmented release.

Switchable Polymer Materials Controlled by Rotaxane Macromolecular Switches

The synthesis and dynamic nature of macromolecular systems controlled by rotaxane macromolecular switches are introduced to discuss the significance of rotaxane linking of polymer chains and its topological switching. Macromolecular switches have been synthesized from macromolecular [2]rotaxanes (M2Rs) using sec-ammonium salt/crown ether couples. The successful synthesis of M2Rs possessing a single polymer axle and one crown ether wheel, constituting a key component of the macromolecular switch, has allowed us to develop various unique applications such as the development of topology-transformable polymers. Polymer topological transformations (e.g., linear-star and linear-cyclic) are achieved using rotaxane-linked polymers and rotaxane macromolecular switches. The pronounced dynamic nature of these polymer systems is sufficiently interesting to design sophisticated stimuli-responsive molecules, polymers, and materials.

Triply responsive coumarin-based microgels with remarkably large photo-switchable swelling

Using two different wavelengths of UV light enables remarkably strong photo-switchable swelling of pH- and temperature-responsive microgels and photo-release of doxorubicin.

Temperature and Recognition Dual Responsive Poly(N-Isopropylacrylamide) and Poly(N,N-Dimethylacrylamide) with Adamantyl Side Group

A series of copolymers with an adamantyl side group (poly(NIPAM-co-AdMA) and poly(DMAM-co-AdMA)) were prepared by radical copolymerization of N-isopropylacrylamide (NIPAM) and N,N-dimethylacrylamide (DMAM) with a 2-methyl-2-adamantylmethacrylate (AdMA) monomer. The structure and composition of the as-synthesized copolymers were characterized by Fourier transform infrared (FT-IR) spectroscopy, proton nuclear magnetic resonance (¹H NMR) spectroscopy, gel permeation chromatography (GPC), thermogravimetric analysis (TGA), and elemental analysis. Temperature and recognition dual responsivity of the copolymers was investigated by cloud point (T_cp) and dynamic light scattering (DLS), respectively. The results show that the as-synthesized copolymers are a kind of temperature-responsive polymer with a lower critical solution temperature (LCST). T_cp was approximately consistent with the critical temperature of intermolecular copolymer association (T_ass) from DLS. For these copolymers, T_cp decreases with increasing content of AdMA unit in the copolymers. After the addition of β-cyclodextrins (β-CD), T_cp increases, and the increment of T_cp values gradually became large with increasing content of AdMA in the copolymers. It is host-guest molecular recognition of β-CD and adamantyl groups that endows the as-synthesized copolymers with recognition-tunable thermosensitivity.

3D Printed Photoresponsive Devices Based on Shape Memory Composites

Compared with traditional stimuli-responsive devices with simple planar or tubular geometries, 3D printed stimuli-responsive devices not only intimately meet the requirement of complicated shapes at macrolevel but also satisfy various conformation changes triggered by external stimuli at the microscopic scale. However, their development is limited by the lack of 3D printing functional materials. This paper demonstrates the 3D printing of photoresponsive shape memory devices through combining fused deposition modeling printing technology and photoresponsive shape memory composites based on shape memory polymers and carbon black with high photothermal conversion efficiency. External illumination triggers the shape recovery of 3D printed devices from the temporary shape to the original shape. The effect of materials thickness and light density on the shape memory behavior of 3D printed devices is quantified and calculated. Remarkably, sunlight also triggers the shape memory behavior of these 3D printed devices. This facile printing strategy would provide tremendous opportunities for the design and fabrication of biomimetic smart devices and soft robotics.

Light-responsive azo-containing organogels

While azo compounds are widely employed as radical initiators, they have rarely been used as stimuli-responsive motifs in macromolecular constructs. In this study, an azo-based cross-linker was prepared and reacted with poly(vinyl alcohol) to afford a series of stimuli-responsive organogels. Irradiation of these materials with UV light causes de-cross-linking and triggers a solid-to-liquid phase transition. Model adhesives with de-bonding-on-demand capability based on this design were explored.

Dual thermo- and light-responsive coumarin-based copolymers with programmable cloud points

This article deals with the design of a new class of dual-responsive coumarin-based copolymers, sensitive to temperature and light (UV and near infrared).

Photoresponsive liquid crystalline polymer single-chain nanoparticles

Single-chain nanoparticles prepared from a side-chain liquid crystalline polymer bearing azobenzene moieties can be multifunctional.

Photodegradable and size-tunable single-chain nanoparticles prepared from a single main-chain coumarin-containing polymer precursor

A polyester bearing coumarin moieties in the main chain was used to prepare photodegradable single-chain nanoparticles (SCNPs) of variable sizes. While the intra-chain photodimerization of the chromophore determines the size of SCNPs, the photocleavage occurring under UV irradiation at a different wavelength breaks down the ultra-small nanoparticles.

Fe(iii)-mediated ICAR ATRP in a p-xylene/PEG-200 biphasic system: facile and highly efficient separation and recycling of an iron catalyst

Iron catalyst separation and recycling was successfully achieved in a liquid/liquid biphasic TPSC-based ICAR ATRP system.

How can photoisomerization of azobenzene induce a large cloud point temperature shift of PNIPAM?

We present a comprehensive study of the photo-induced phase transition of azobenzene-containing poly(N-isopropylacrylamide) (PNIPAM) in block copolymers (BCPs) upon the isomerization of azobenzene in the mixed solvent of water and dioxane.

Thermosensitive AB4 four-armed star PNIPAM-b-HTPB multiblock copolymer micelles for camptothecin drug release

Thermo-sensitive poly(N-isoproplacrylamide)m-block-hydroxyl-terminated polybutadiene-block-poly(N-isoproplacrylamide)m (PNIPAMm-b-HTPB-b-PNIPAMm, m = 1 or 2) block copolymers, AB4 four-armed star multiblock and linear triblock copolymers, were synthesized by ATRP with HTPB as central blocks, and characterization was performed by (1)H NMR, Fourier transform infrared, and size exclusion chromatography. The multiblock copolymers could spontaneously assemble into more regular spherical core-shell nanoscale micelles than the linear triblock copolymer. The physicochemical properties were detected by a surface tension, nanoparticle analyzer, transmission electron microscope (TEM), dynamic light scattering, and UV-vis measurements. The multiblock copolymer micelles had lower critical micelle concentration than the linear counterpart, TEM size from 100 to 120 nm, and the hydrodynamic diameters below 150 nm. The micelles exhibited thermo-dependent size change, with low critical solution temperature of about 33-35 °C. The characteristic parameters were affected by the composition ratios, length of PNIPAM blocks, and molecular architectures. The camptothecin release demonstrated that the drug release was thermo-responsive, accompanied by the temperature-induced structural changes of the micelles. MTT assays were performed to evaluate the biocompatibility or cytotoxicity of the prepared copolymer micelles.

Thermosensitive PNIPAM-b-HTPB block copolymer micelles: molecular architectures and camptothecin drug release

Two kinds of thermo-sensitive poly(N-isoproplacrylamide) (PNIPAM) block copolymers, AB4 four-armed star multiblock and linear triblock copolymers, were synthesized by ATRP with hydroxyl-terminated polybutadiene (HTPB) as central blocks, and characterization was performed by (1)H NMR, FT-IR and SEC. The multiblock copolymers could spontaneously assemble into more regular spherical core-shell nanoscale micelles than the linear triblock copolymer. The physicochemical properties were detected by a surface tension technique, nano particle analyzer, TEM, DLS and UV-vis measurements. The multiblock copolymer micelles had lower critical micelle concentration than the linear counterpart, TEM size from 100 to 120 nm and the hydrodynamic diameters below 150 nm. The micelles exhibited thermo-dependent size change, with low critical solution temperature about 33-35 °C. The characteristic parameters were affected by the composition ratios, length of PNIPAM blocks and molecular architectures. The camptothecin release demonstrated that the drug release was thermo-responsive, accompanied by the temperature-induced structural changes of the micelles. MTT assays were performed to evaluate the biocompatibility or cytotoxicity of the prepared copolymer micelles.

Thermo- and light-regulated formation and disintegration of double hydrophilic block copolymer assemblies with tunable fluorescence emissions

We report on thermo- and light-regulated formation and disintegration of double hydrophilic block copolymer (DHBC) micelles associated with tunable fluorescence emissions by employing two types of DHBCs covalently labeled with fluorescence resonance energy transfer (FRET) donor and acceptor moieties, respectively, within the light and temperature dually responsive block. Both DHBCs are molecularly soluble at room temperature in their aqueous mixture, whereas, upon heating to above the critical micellization temperature (CMT, ~31 °C), they coassemble into mixed micelles possessing hydrophilic coronas and mixed cores containing FRET donors and acceptors. Accordingly, the closer spatial proximity between the FRET pair (NBDAE and RhBEA moieties) within micellar cores leads to substantially enhanced FRET efficiency, compared to that in the non-aggregated unimer state. Moreover, upon UV irradiation, the light-reactive moieties undergo light-cleavage reaction and transform into negatively charged carboxylate residues, leading to elevated CMT (∼46 °C). Thus, thermo-induced mixed micelles in the intermediate temperature range (31 °C < T < 46 °C) undergo light-triggered disintegration into unimers, accompanied with the decrease of FRET efficiency. Overall, the coassembly and disassembly occurring in the mixed DHBC solution can be dually regulated by temperature and UV irradiation, and most importantly, these processes can be facilely monitored via changes in FRET efficiency and distinct emission colors.

Photoswitching of chiral supramolecular environments and photoinduced lower critical solution temperature transitions in aqueous media following a supramolecular approach

Photochromic diarylethene is a promising candidate not only for optical memory and switching units in molecular devices, but also as a photoresponsive building block that can regulate supramolecular architectures because of its characteristic changes in the flexibility of the framework and delocalization of π-electrons, along with its photoisomerization ability. Amphiphilic photochromic compounds with oligo-(ethylene glycol) side chains show good solubility in water, and self-assemble into nanostructures in aqueous media. Asymmetric introduction of a methyl group can induce a helical preference in the supramolecular structure, and the photoswitching behaviour of supramolecular chirality was defined by circular dichroism (CD) spectroscopy and density functional theory (DFT) calculations. The effective position of an asymmetric group to induce supramolecular chirality is also discussed. In addition, the self-assemblies of diarylethene derivatives in water show photoresponsive lowest critical solution temperature (LCST). The open- and closed-ring isomers show LCST transitions at different temperatures. In particular, the difference in LCST becomes prominent when amide groups are introduced at the root of hydrophilic side chains. This is attributed to intermolecular hydrogen bonds formed by the amide groups in the hydrophobic region of the supramolecular structure in water.