Synthesis of 1-Vinyl-3-ethylimidazolium-Based Ionic Liquid (Co)polymers by Cobalt-Mediated Radical Polymerization

N-Heterocyclic Carbenes in Materials Chemistry

N-Heterocyclic carbenes (NHCs) have become one of the most widely studied class of ligands in molecular chemistry and have found applications in fields as varied as catalysis, the stabilization of reactive molecular fragments, and biochemistry. More recently, NHCs have found applications in materials chemistry and have allowed for the functionalization of surfaces, polymers, nanoparticles, and discrete, well-defined clusters. In this review, we provide an in-depth look at recent advances in the use of NHCs for the development of functional materials.

Self-assembly of highly asymmetric, poly(ionic liquid)-rich diblock copolymers and the effects of simple structural modification on phase behaviour

A series of ATRP-synthesized poly(IL) diblock copolymers exhibit morphological phase behavior with shifted phase boundaries and alkyl substituent dependent segregation.

Frontiers in poly(ionic liquid)s: syntheses and applications

We review recent works on the synthesis and application of poly(ionic liquid)s (PILs). Novel chemical structures, different synthetic strategies and controllable morphologies are introduced as a supplement to PIL systems already reported. The primary properties determining applications, such as ionic conductivity, aqueous solubility, thermodynamic stability and electrochemical/chemical durability, are discussed. Furthermore, the near-term applications of PILs in multiple fields, such as their use in electrochemical energy materials, stimuli-responsive materials, carbon materials, and antimicrobial materials, in catalysis, in sensors, in absorption and in separation materials, as well as several special-interest applications, are described in detail. We also discuss the limitations of PIL applications, efforts to improve PIL physics, and likely future developments.

Industrial development of reversible-deactivation radical polymerization: is the induction period over?

The commercial applications of polymers produced by reversible-deactivation radical polymerization are reviewed here.

Bis(formylphenolato)cobalt(II)-Mediated Alternating Radical Copolymerization of tert-Butyl 2-Trifluoromethylacrylate with Vinyl Acetate

The organometallic-mediated radical polymerization (OMRP) of vinyl acetate (VAc) and its OMR copolymerization (OMRcoP) with tert-butyl 2-trifluoromethylacrylate (MAF-TBE) mediated by Co(SAL)₂ (SAL = 2-formylphenolato or deprotonated salicylaldehyde) produced relatively well-defined PVAc and poly(VAc-alt-MAF-TBE) copolymers at moderate temperature (<40 °C) in bulk. The resulting alternating copolymer was characterized by ¹H-, 13C- and 19F-nuclear magnetic resonance (NMR) spectroscopies, and by size exclusion chromatography. The linear first-order kinetic plot, the linear evolutions of the molar mass with total monomer conversion, and the relatively low dispersity (Đ~1.55) of the resulting copolymers suggest that this cobalt complex provides some degree of control over the copolymerization of VAc and MAF-TBE. Compared to the previously investigated cobalt complex OMRP mediators having a fully oxygen-based first coordination sphere, this study emphasizes a few peculiarities of Co(SAL)₂: a lower ability to trap radical chains as compared to Co(acac)₂ and the absence of catalytic chain transfer reactions, which dominates polymerizations carried in the presence of 9-oxyphenalenone cobalt derivative.

Ionic Conductivity and Assembled Structures of Imidazolium Salt-Based Block Copolymers with Thermoresponsive Segments

Ionic liquid-based block copolymers composed of ionic (solubility tunable)⁻nonionic (water-soluble and thermoresponsive) segments were synthesized to explore the relationship between ionic conductivity and assembled structures. Three block copolymers, comprising poly(N-vinylimidazolium bromide) (poly(NVI-Br)) as a hydrophilic poly(ionic liquid) segment and thermoresponsive poly(N-isopropylacrylamide) (poly(NIPAM)), having different compositions, were initially prepared by RAFT polymerization. The anion-exchange reaction of the poly(NVI-Br) in the block copolymers with lithium bis(trifluoromethanesulfonyl)imide (LiNTf₂) proceeded selectively to afford amphiphilic block copolymers composed of hydrophobic poly(NVI-NTf₂) and hydrophilic poly(NIPAM). Resulting poly(NVI-NTf₂)-b-poly(NIPAM) exhibited ionic conductivities greater than 10-3 S/cm at 90 °C and 10-4 S/cm at 25 °C, which can be tuned by the comonomer composition and addition of a molten salt. Temperature-dependent ionic conductivity and assembled structures of these block copolymers were investigated, in terms of the comonomer composition, nature of counter anion and sample preparation procedure.

Poly(ionic liquid)s with controlled architectures and their use in the making of ionogels with high conductivity and tunable rheological properties

We describe the preparation as well as the electrochemical and mechanical properties of a series of novel well-defined poly(ionic liquids) (PILs) featuring a finely tuned cross-linking ratio.

Direct one-pot synthesis of poly(ionic liquid) nanogels by cobalt-mediated radical cross-linking copolymerization in organic or aqueous media

Nanogels of controlled kinetic chain length were synthesized by cobalt-mediated radical cross-linking copolymerization (CMRccP) involving a vinyl monomer and a divinyl cross-linker.

Thiazolium Poly(ionic liquid)s: Synthesis and Application as Binder for Lithium-Ion Batteries

We report a synthetic route to thiazolium-type poly(ionic liquid)s (PILs), which can be applied as a polymeric binder in lithium-ion batteries. The ionic liquid monomers were first synthesized by quaternization reaction of 4-methyl-5-vinyl thiazole with methyl iodide, followed by anion exchange reactions to replace iodide by fluorinated anions to access a liquid state below 100 °C. Subsequently, these monomers bearing thiazolium cations in their structure underwent radical polymerizations in bulk to produce corresponding polymers. The dependence of solution and thermal properties of such monomeric and polymeric materials on the choice of the counteranion was investigated. Finally, the thiazolium-type PIL bearing a bis(trifluoromethanesulfonyl)imide (TFSI) anion was proven to be a high performance binder for lithium-ion battery electrodes.

Aqueous RAFT Polymerization of Imidazolium-Type Ionic Liquid Monomers: En Route to Poly(ionic liquid)-Based Nanoparticles through RAFT Polymerization-Induced Self-Assembly

The synthesis by aqueous RAFT polymerization of hydrophilic narrowly dispersed imidazolium-based poly(ionic liquid)s (Đ typically below 1.20) is reported. Full monomer conversion is achieved within hours and high end-group fidelity of the living end groups affords the preparation of well-defined block copolymers. The resulting poly(ionic liquid) macroRAFT agents are finally exploited to polymerize 2-vinylpyridine in water and generate PIL-based nanoparticles of various morphologies (spheres, vesicles, or worms) in a one-pot surfactant-free process.

Direct Route to Well-Defined Poly(ionic liquid)s by Controlled Radical Polymerization in Water

The precision synthesis of poly(ionic liquid)s (PILs) in water is achieved for the first time by the cobalt-mediated radical polymerization (CMRP) of N-vinyl-3-alkylimidazolium-type monomers following two distinct protocols. The first involves the CMRP of various 1-vinyl-3-alkylimidazolium bromides conducted in water in the presence of an alkyl-cobalt(III) complex acting as a monocomponent initiator and mediating agent. Excellent control over molar mass and dispersity is achieved at 30 °C. Polymerizations are complete in a few hours, and PIL chain-end fidelity is demonstrated up to high monomer conversions. The second route uses the commercially available bis(acetylacetonato)cobalt(II) (Co(acac)₂) in conjunction with a simple hydroperoxide initiator (tert-butyl hydroperoxide) at 30, 40, and 50 °C in water, facilitating the scaling-up of the technology. Both routes prove robust and straightforward, opening new perspectives onto the tailored synthesis of PILs under mild experimental conditions in water.

Expanding the Scope of Controlled Radical Polymerization via Cobalt-Tellurium Radical Exchange Reaction

Cobalt-mediated radical polymerization (CMRP) and tellurium-mediated radical polymerization (TERP) were combined for the first time, offering new perspectives in the precision design of macromolecular structures. In particular, the present work highlights the benefits of this strategy for the synthesis of novel poly(vinyl acetate)-based block copolymers. A range of well-defined poly(vinyl acetate)s (PVAc) were first produced via CMRP using the bis(acetylacetonato)cobalt(II) complex (Co(acac)₂) as a regulating agent. Substitution of a methyltellanyl moiety for Co(acac)₂ at the ω-chain end of the precursor was then achieved upon treatment with dimethylditelluride. In contrast to the PVAc prepared by TERP, the ones produced by sequential CMRP and Co/Te exchange reaction almost exclusively consist of regular head-to-tail-TeMe chain-end species that can be activated by TERP. Ultimately, a series of monomers problematic in Co(acac)₂-mediated radical polymerization including N-isopropylacrylamide (NIPAM), 2-(dimethylamino)ethyl acrylate (ADAME), n-butyl acrylate (BA), isoprene (IP), and vinylimidazole (NVIm) were polymerized by TERP from the PVAc-TeMe macroinitiators leading to novel diblock copolymers that cannot be made by each technique used separately.

Omnidispersible poly(ionic liquid)-functionalized cellulose nanofibrils: surface grafting and polymer membrane reinforcement

Poly(ionic liquid)s were grafted onto cellulose nanofibrils (CNFs) to provide superior dispersibility to CNFs in water and various organic solvents.

(Co)Polymerization of vinyl levulinate by cobalt-mediated radical polymerization and functionalization by ketoxime click chemistry

(Co)polymerization of vinyl levulinate (with vinyl acetate) by cobalt-mediated radical polymerization affords well-defined poly(vinyl ester)s. Pendant ketone functionalities are conjugated by ketoxime click chemistry.

Cationic Poly(ionic liquid) with Tunable Lower Critical Solution Temperature-Type Phase Transition

A cationic polyelectrolyte based on the styrenic ionic liquid tributyl-4-vinylbenzylphosphonium pentanesulfonate was found to undergo a lower critical solution temperature (LCST)-type phase transition in aqueous solutions. This phase transition occurs in a wide temperature range in terms of polymer concentration as well as type and concentration of externally added salts. Anion exchange and salting out effects are responsible for the flexible phase transition temperature.