Light Harvesting Arrays of Polypyridine Ruthenium(II) Chromophores Prepared by Reversible Addition–Fragmentation Chain Transfer Polymerization

Preparation of spiroborate supramolecular and peapod polymers containing a photoluminescent ruthenium(ii) complex

The immobilization of functional metal complexes onto polymer supports remains one of the most important research areas. In this study, we prepared spiroborate supramolecular and peapod polymers containing a cationic photoluminescent ruthenium(ii) complex. The supramolecular polymer was obtained by mixing spiroborate cyclic trimer bearing homoallyl group and a ruthenium(ii) tris(bipyridyl) complex, and was further converted into the corresponding peapod polymer by olefin metathesis polymerization. The structure of these polymers was determined by 1H NMR, dynamic light scattering, inductively coupled plasma-atomic emission spectroscopy, energy dispersive X-ray analyses, and atomic force microscopy. The absorption and emission behaviors of the ruthenium(ii) complex were almost the same for the free form and the supramolecular polymer in the mixed solvent of N,N-dimethylformamide and chloroform, although the emission intensity decreased when the chloroform portion was increased. On the other hand, the hypsochromism was observed upon the emission of the ruthenium(ii) complex in the peapod polymer, probably due to the rigidochromic effect of the tight encapsulation by the peapod structure.

Photocathodes beyond NiO: charge transfer dynamics in a π-conjugated polymer functionalized with Ru photosensitizers

A conductive polymer (poly(p-phenylenevinylene), PPV) was covalently modified with Ru^II complexes to develop an all-polymer photocathode as a conceptual alternative to dye-sensitized NiO, which is the current state-of-the-art photocathode in solar fuels research. Photocathodes require efficient light-induced charge-transfer processes and we investigated these processes within our photocathodes using spectroscopic and spectro-electrochemical techniques. Ultrafast hole-injection dynamics in the polymer were investigated by transient absorption spectroscopy and charge transfer at the electrode-electrolyte interface was examined with chopped-light chronoamperometry. Light-induced hole injection from the photosensitizers into the PPV backbone was observed within 10 ps and the resulting charge-separated state (CSS) recombined within ~ 5 ns. This is comparable to CSS lifetimes of conventional NiO-photocathodes. Chopped-light chronoamperometry indicates enhanced charge-transfer at the electrode-electrolyte interface upon sensitization of the PPV with the Ru^II complexes and p-type behavior of the photocathode. The results presented here show that the polymer backbone behaves like classical molecularly sensitized NiO photocathodes and operates as a hole accepting semiconductor. This in turn demonstrates the feasibility of all-polymer photocathodes for application in solar energy conversion.

Azide-Terminated RAFT Polymers for Biological Applications

Reversible addition-fragmentation chain-transfer (RAFT) polymerization is a commonly used polymerization methodology to generate synthetic polymers. The products of RAFT polymerization, i.e., RAFT polymers, have been widely employed in several biologically relevant areas, including drug delivery, biomedical imaging, and tissue engineering. In this article, we summarize a synthetic methodology to display an azide group at the chain end of a RAFT polymer, thus presenting a reactive site on the polymer terminus. This platform enables a click reaction between azide-terminated polymers and alkyne-containing molecules, providing a broadly applicable scaffold for chemical and bioconjugation reactions on RAFT polymers. We also highlight applications of these azide-terminated RAFT polymers in fluorophore labeling and for promoting organelle targeting capability. © 2020 Wiley Periodicals LLC. Basic Protocol 1: Synthesis of the azide derivatives of chain transfer agent and radical initiator Basic Protocol 2: Installation of an azide group on the α-end of RAFT polymers Alternate Protocol: Installation of an azide group on the ω-end of RAFT polymers Basic Protocol 3: Click reaction between azide-terminated RAFT polymers and alkyne derivatives.

Triplet-Triplet Annihilation-Based Upconversion Sensitized by a Reverse Micellar Assembly of Amphiphilic Ruthenium Complexes

We have developed a new photon upconversion (UC) system utilizing a new amphiphilic sensitizer 1a that comprises a hydrophilic ruthenium complex and a lipophilic bisanthracene appendage. At concentrations higher than 5 μM in toluene, the sensitizer 1a formed a reverse micellar assembly which facilitated the triplet sensitization of 9,10-diphenylanthracene (DPA) more efficiently than homogeneously dispersed solutions to enhance the UC efficiency up to 38.2%. The Stern-Volmer analyses revealed the stepwise triplet-triplet energy transfers (TTET): (1) intramicellar energy transfer from the ruthenium core to the bisanthracene surface and (2) diffusion-dependent energy transfer from the surface to DPA. On these bases, it can be assumed that the reverse micellar assemblies accelerate the former TTET process to enhance the UC efficiency.

Robust hollow nanocomposites with ruthenium-bipyridine complexes for heterogeneous catalysis of logic-controlled RAFT polymerization

Photoinduced electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization has become a powerful and eco-friendly toolkit to create well-defined macromolecular buildups while exhibiting composition, sequence and spatiotemporal control. Although PET-RAFT polymerization is generally much more convenient than living ionic polymerization, it is still a great challenge to regulate the polymerization upon multiple external stimuli and to simplify the procedures of post-polymerization purification. In this contribution, hHPGE-PFPPNRu nanocomposites were engineered as catalyst supports to firmly accommodate ruthenium-bipyridine complexes for heterogeneous catalysis of PET-RAFT polymerization. The manipulation of reaction temperature modulated the performance of the nanocatalysts, with a pronounced acceleration of the polymerization kinetics being identified at a temperature above the lower critical solution temperature (LCST) of poly(N-isopropylacrylamide) (PNIPAM) brushes compared to that below it. Consequently, the control of RAFT polymerization can be achieved upon the dual-stimuli of light and heat. Moreover, these nanocatalysts conferred radical polymerizations with myriad attractive features such as the adaptability of diverse monomer formulations and reaction media, exquisite control over the molecular variables, oxygen tolerance, and catalyst doses in the ppm range. Owing to the robust mechanical nature of nanocomposites, the separation and reuse of the nanocatalysts were readily realized by rapid centrifugation, and they showed inappreciable catalyst leakage along with consistent catalytic performance even after multiple polymerization runs.

Photoactive supramolecular cages incorporating Ru(ii) and Ir(iii) metal complexes

Cage compounds incorporating phosphorescent Ru(ii) and Ir(iii) metal complexes possess a highly desirable set of optoelectronic and physical properties. This feature article summarizes the recent work on cage assemblies containing these metal complexes as photoactive units, highlighting our contribution to this growing field.

"Chemistry-on-the-complex": functional RuII polypyridyl-type sensitizers as divergent building blocks

Ruthenium polypyridyl type complexes are potent photoactive compounds, and have found - among others - a broad range of important applications in the fields of biomedical diagnosis and phototherapy, energy conversion schemes such as dye-sensitized solar cells (DSSCs) and molecular assemblies for tailored photo-initiated processes. In this regard, the linkage of RuII polypyridyl-type complexes with specific functional moieties is highly desirable to enhance their inherent photophysical properties, e.g., with a targeting function to achieve cell selectivity, or with a dye or redox-active subunits for energy- and electron-transfer. However, the classical approach of performing ligand syntheses first and the formation of Ru complexes in the last steps imposes synthetic limitations with regard to tolerating functional groups or moieties as well as requiring lengthy convergent routes. Alternatively, the diversification of Ru complexes after coordination (termed "chemistry-on-the-complex") provides an elegant complementary approach. In addition to the Click chemistry concept, the rapidly developing synthesis and purification methodologies permit the preparation of Ru conjugates via amidation, alkylation and cross-coupling reactions. In this regard, recent developments in chromatography shifted the limits of purification, e.g., by using new commercialized surface-modified silica gels and automated instrumentation. This review provides detailed insights into applying the "chemistry-on-the-complex" concept, which is believed to stimulate the modular preparation of unpreceded molecular assemblies as well as functional materials based on Ru-based building blocks, including combinatorial approaches.

A luminescent [Pd4Ru8]24+ supramolecular cage

A phosphorescent cage of the form [Pd₄Ru₈]²⁴⁺ is reported.

Polymer-based chromophore-catalyst assemblies for solar energy conversion

The synthesis of polymer-based assemblies for light harvesting has been motivated by the multi-chromophore antennas that play a role in natural photosynthesis for the potential use in solar conversion technologies. This review describes a general strategy for using polymer-based chromophore-catalyst assemblies for solar-driven water oxidation at a photoanode in a dye-sensitized photoelectrochemical cell (DSPEC). This report begins with a summary of the synthetic methods and fundamental photophysical studies of light harvesting polychormophores in solution which show these materials can transport excited state energy to an acceptor where charge-separation can occur. In addition, studies describing light harvesting polychromophores containing an anchoring moiety (ionic carboxylate) for covalent bounding to wide band gap mesoporous semiconductor surfaces are summarized to understand the photophysical mechanisms of directional energy flow at the interface. Finally, the performance of polychromophore/catalyst assembly-based photoanodes capable of light-driven water splitting to oxygen and hydrogen in a DSPEC are summarized.

Distant ultrafast energy transfer in a trimetallic {Ru-Ru-Cr} complex facilitated by hole delocalization

Multi-metallic complexes based on {Ru-Cr}, {Ru-Ru} and {Ru-Ru-Cr} fragments are investigated for their light-harvesting and long-range energy transfer properties. We report the synthesis and characterization of [Ru(tpy)(bpy)(μ-CN)Ru(py)₄Cl]²⁺ and [Ru(tpy)(bpy)(μ-CN)Ru(py)₄(μ-NC)Cr(CN)₅]. The intercalation of {Ru^II(py)₄} linked by cyanide bridges between {Ru(tpy)(bpy)} and {Cr(CN)₅} results in efficient, distant energy transfer followed by emission from the Cr moiety. Characterization of the energy transfer process based on photophysical and ultrafast time-resolved absorption suggests the delocalization of holes in the excited state, providing a pathway for energy transfer between the end moieties. The proposed mechanism opens the door to utilize this family of complexes as an appealing platform for the design of antenna compounds as the properties of the fragments could be tuned independently.

RAFT polymerization to form stimuli-responsive polymers

Stimuli-responsive polymers respond to a variety of external stimuli, which include optical, electrical, thermal, mechanical, redox, pH, chemical, environmental and biological signals. This paper is concerned with the process of forming such polymers by RAFT polymerization.

Construction and properties of a light-harvesting antenna system for phosphorescent materials based on oligofluorene-tethered Pt–porphyrins

Tetramerous molecular assemblies composed of four oligofluorenes as a light-harvesting antenna (LHA) and a Pt–porphyrin core as a phosphorescent chromophore were designed and synthesized for obtaining efficient phosphorescent materials.

Synthetic approaches towards structurally-defined electrochemically and (photo)redox-active polymer architectures

This review details synthetic strategies leading to structurally-defined electrochemically and (photo)redox-active polymer architectures,e.g.block, graft and end functionalized (co)polymers.

CuAAC click reactions for the design of multifunctional luminescent ruthenium complexes

CuAAC (Cu(i) catalyzed azide–alkyne cycloaddition) click chemistry has emerged as a versatile tool in the development of photoactive ruthenium complexes with multilateral potential applicability. Three general concepts for their synthesis and selected applications are discussed.

Excimer formation in a confined space: photophysics of ladderphanes with tetraarylethylene linkers

Communication between chromophores is vital for both natural and non-natural photophysical processes. Spatial confinements offer unique conditions to scrutinize such interactions. Polynorbornene- and polycyclobutene-based ladderphanes are ideal model compounds in which all tetraarylethylene (TAE) linkers are aligned coherently. The spans for each of the monomeric units in these ladderphanes are 4.5-5.5 Å. Monomers do not exhibit emission, because bond rotation in TAE can quench the excited-state energy. However, polymers emit at 493 nm (Φ=0.015) with large Stokes shift under ambient conditions and exhibit dual emission at 450 and 493 nm at 150 K. When the temperature is lowered, the emission intensity at 450 nm increases, whereas that at 493 nm decreases. At 100 K, both monomers and polymers emit only at 450 nm. This shorter-wavelength emission arises from the intrinsic emission of TAE chromophore, and the emission at 493 nm could be attributed to the excimer emission in the confined space of ladderphanes. The fast kinetics suggest diffusion-controlled formation of the excimer.

Ru(bpy)32+ derivatized polystyrenes constructed by nitroxide-mediated radical polymerization. Relationship between polymer chain length, structure and photophysical properties

A series of polystyrene-based light harvesting polymers featuring pendant polypyridyl ruthenium complexes has been synthesized.

Efficient and tunable fluorescence energy transfer via long-lived polymer excitons

A highly fluorescent polymer consisting of repeating pendant dye molecules, difluoroboron dibenzoylmethane (BF₂dbm), and an end-capped Rhodamine B (RhB) exhibits efficient energy transfer (EnT) owing to long-lived polymer excitons.

Self-assembled supramolecular cages containing ruthenium(ii) polypyridyl complexes

Substitution-inert, redox- and photo-active ruthenium(ii) complexes based on 2,2′,6′,2′′-terpyridine ligands were self-assembled into discrete supramolecular cages via coordination to palladium(ii) centres and characterised by NMR, ESI-MS and X-ray crystallography.

Polypyridyl Ru(ii)-derivatized polypropylacrylate polymer with a terminal water oxidation catalyst. Application of reversible addition–fragmentation chain transfer polymerization

A ruthenium containing poly(propylmethacrylate) derivative was synthesized by RAFT polymerization and end-capped with a catalyst derivative.

Soluble reduced graphene oxide sheets grafted with polypyridylruthenium-derivatized polystyrene brushes as light harvesting antenna for photovoltaic applications

Soluble graphene nanosheets, prepared by grafting polystyrene-based polymer chains from the surface of reduced graphene oxide (RGO), have been functionalized with pendant Ru(II) polypyridine chromophores. N-Hydroxysuccinimide (NHS) derivatized p-vinylbenzoic acid polymer chains were grown from methyl bromoisobutyrate initiation sites on the surface of RGO by atom transfer radical polymerization (ATRP). Deprotection of the resulting NHS polystyrene chains followed by amide coupling with the amine-derivatized Ru(II) polypyridyl complex [Ru(4-CH2NH2-4'-CH3-bpy)(bpy)2](2+) (4-CH2NH2-4'-CH3-bpy = 4-aminomethyl-4'-methyl 2,2'-bipyridine and bpy = 2,2'-bipyridine) afforded the covalently linked RGO-metallopolymer. The hybrid graphene-polymer assembly has been fully characterized with clear evidence for covalent attachment of the metallopolymer brushes to the graphene substrate. On the basis of thermal gravimetric analysis, one polymer strand is grafted to the surface of RGO for every hundred graphene carbons. The covalently linked polymer brushes feature controlled chain lengths of ∼30 repeat units with a small polydispersity index (PDI, ∼ 1.2). Photovoltaic cells based on the derivatized polymers and graphene-polymer assemblies were evaluated. The graphene-polymer assembly in the configuration, ITO/PEDOT:PSS/RGO-PSRu/PC60BM/Al, exhibited enhanced photocurrent and power conversion efficiencies (∼5 fold) relative to devices with the configuration, ITO/PEDOT:PSS/PSRu/PC60BM/Al.

Atom transfer radical polymerization preparation and photophysical properties of polypyridylruthenium derivatized polystyrenes

A ruthenium containing polymer featuring a short carbonyl-amino-methylene linker has been prepared by atom transfer radical polymerization (ATRP). The polymer was derived from ATRP of the N-hydroxysuccinimide (NHS) derivative of p-vinylbenzoic acid, followed by an amide coupling reaction of the NHS-polystyrene with Ru(II) complexes derivatized with aminomethyl groups (i.e., [Ru(bpy)2(CH3-bpy-CH2NH2)](2+) where bpy is 2,2'-bipyridine, and CH3-bpy-CH2NH2 is 4-methyl-4'-aminomethyl-2,2'-bipyridine). The Ru-functionalized polymer structure was confirmed by using nuclear magnetic resonance and infrared spectroscopy, and the results suggest that a high loading ratio of polypyridylruthenium chromophores on the polystyrene backbone was achieved. The photophysical properties of the polymer were characterized in solution and in rigid ethylene glycol glasses. In solution, emission quantum yield and lifetime studies reveal that the polymer's metal-to-ligand charge transfer (MLCT) excited states are quenched relative to a model Ru complex chromophore. In rigid media, the MLCT-ground state band gap and lifetime are both increased relative to solution with time-resolved emission measurements revealing fast energy transfer hopping within the polymer. Molecular dynamics studies of the polymer synthesized here as well as similar model systems with various spatial arrangements of the pendant Ru complex chromophores suggest that the carbonyl-amino-methylene linker probed in our target polymer provides shorter Ru-Ru nearest-neighbor distances leading to an increased Ru*-Ru energy hopping rate, compared to those with longer linkers in counterpart polymers.