Hybrid Copolymerization of ε-Caprolactone and Methyl Methacrylate

Catalysts as Key Enablers for the Synthesis of Bioplastics with Sophisticated Architectures

Bioplastics are one of the answers to environmental pollution and linear material flows. The most promising bioplastic polylactide (PLA) is already replacing conventional plastics in a number of applications. The properties of PLA, however, do not fit for all potential application areas, but they can be altered by the introduction of comonomers. The copolymerization of lactide (LA) with other lactones like ϵ-caprolactone (CL) has been established for several years. Nevertheless, controlling copolymerizations remains a challenge due to the high complexity of the system. Copolymerization of LA with other monomer classes is much less investigated, but has the chance to overcome the limitations in material properties that occur when only lactones are used. The crucial factor for all copolymerizations is the catalyst. It dominates the reaction kinetics and determines the resulting microstructure. In this review, copolymerization catalysts for LA are presented divided into catalysts for the synthesis of lactone block copolymers, lactone random copolymers, and multimechanistically synthesized copolymers. The selected catalysts are highlighted either owing to their industrially applicable polymerization conditions or their non-standard mechanism.

Block Copolymer Synthesis by a Sequential Addition Strategy from the Organocatalytic Group Transfer Polymerization of Methyl Methacrylate to the Ring-Opening Polymerization of Lactide

Sequential block copolymerization involving comonomers belonging to different classes, e.g., a vinyl-type monomer and a heterocycle, is a challenging task in macromolecular chemistry, as corresponding propagating species do not interconvert easily from one to the other by crossover reactions. Here, it is first evidenced that 1-methoxy 2-methyl 1-trimethylsilyloxypropene (MTS), i.e., a silyl ketene acetal (SKA)-containing initiator, can be used in presence of the P₄ -t-Bu phosphazene organic base to control the ring-opening polymerization (ROP) of racemic lactide (rac-LA). The elementary reaction, which rapidly transforms SKA groups into propagating alkoxides, can be leveraged to directly synthesize well-defined poly(methyl methacrylate)-b-polylactide (PMMA-b-PLA) block copolymers. This is achieved using P₄ -t-Bu as the single organic catalyst and MTS as the initiator for the group transfer polymerization (GTP) of methyl methacrylate (MMA), followed by the ROP of rac-LA. Both polymerization methods are implemented under selective and controlled/living conditions at room temperature in THF. This sequential addition strategy further expands the scope of organic catalysis of polymerizations for macromolecular engineering of block copolymers involving propagating species of disparate reactivity. This article is protected by copyright. All rights reserved.

Degradable Vinyl Polymers for Combating Marine Biofouling

ConspectusMarine organisms such as barnacle larvae and spores of algae adhere to underwater surfaces leading to marine biofouling. This phenomenon has numerous adverse impacts on marine industries and maritime activities. Due to the diversity of fouling organisms and the complexity of the marine environment, it is a huge challenge to combat marine biofouling, which limits the development and utilization of marine resources. Since the International Marine Organization banned the use of tributyltin self-polishing copolymer (SPC) coatings in 2008, the development of an environmentally friendly and efficient anti-biofouling polymer has been the most important task in this field. Tin-free SPC is a well-established and widely used polymer binder for anti-biofouling coating today. Being a nondegradable vinyl polymer, SPC exhibits poor anti-biofouling performance in static conditions. Even more, such nondegradable polymers were considered to be a source of microplastics by the International Union for the Conservation of Nature in 2019. Recently, numerous degradable polymers, which can form dynamic surface through main chain scission, have been developed for preventing marine biofouling in static conditions. Nevertheless, the regulation of their degradation and mechanical properties is limited, and they are also difficult to functionalize. A new polymer combining the advantages of vinyl polymers and degradable polymers is needed. However, such a combination is a challenge since the former are synthesized via free radical polymerization whereas the latter are synthesized via ring-opening polymerization.In this Account, we review our recent progress toward degradable vinyl polymers for marine anti-biofouling in terms of polymerization methods and structures and properties of polymers. First, we introduce the strategies for preparing degradable vinyl polymers with an emphasis on hybrid copolymerization. Then, we present the synthesis and performance of degradable and hydrolyzable polyacrylates, degradable polyurethanes with hydrolyzable side groups, and surface-fragmenting hyperbranched polymers. Polymers with degradable main chains and hydrolyzable side groups combine the advantages of SPC and degradable polymers, so they are degradable and functional. They are becoming new-generation polymers with great potential for preparing high-efficiency, long-lasting, environmentally friendly and broad-spectrum coatings to inhibit marine biofouling. They can also find applications in wastewater treatment, biomedical materials, and other fields.

Caging Cationic Polymer Brush-Coated Plasmonic Nanostructures for Traceable Selective Antimicrobial Activities

Cationic polymers are under intense research to achieve prominent antimicrobial activity. However, the cellular and in vivo toxicity caused by nonspecific electrostatic interaction has become a major challenge for their practical applications. Here, the development of a "caging" strategy based on the use of a block copolymer consisting of a stealth block and an anionic block that undergoes degradation in presence of enzymes secreted by selective bacterial pathogens of interest is reported. The results have shown that antimicrobial cationic polymer brushes-coated gold nanorods (AuNRs) can be caged by the block polymer of poly(ethylene glycol) and anionic, lipase-degradable block of ε-caprolactone and methacrylic acid copolymer to afford neutrally charged surfaces. The caged AuNRs are activated by lipase released by bacteria of interest to endow an excellent bactericidal effect but show minimal binding and toxicity against mammalian cells and nonspecific bacteria that do not produce lipase. In this design, AuNRs play multifunctional roles as the scaffolds for polymer brushes, photothermal transducers, and imaging probes for traceable delivery of the activation and delivery of bactericidal cationic polymer brushes. The caging strategy opens new opportunities for the safe delivery of antimicrobial materials for the treatment of bacterial infections.

Sequentially bridging anionic addition and ring-opening polymerization by cooperative organocatalysis: Well-defined block copolymers from methacrylates and cyclic esters

Organocatalytic sequential block copolymerization of dissimilar monomers with distinct chemical characteristics is great challenging, usually involving the integration of different polymerization mechanism. In this contribution, we reported the synthesis of...

Hybrid copolymerization of acrylate and thiirane monomers mediated by trithiocarbonate

The composition and structure of polymers have great influence on their performances.

Active in Sleep: Iron Guanidine Catalyst Performs ROP on Dormant Side of ATRP

Copolymers are the answer to property limitations of homopolymers. In order to use the full variety of monomers available, catalysts active in more than one polymerization mechanism are currently investigated. Iron guanidine catalysts have shown to be extraordinarily active in ROP of lactide and herein prove their versatility by also promoting ATRP of styrene. The presented iron complex is the first polymerizing lactide and styrene simultaneously to a defined block copolymer in a convenient one-pot synthesis. Both mechanisms work hand in hand with ROP using the dominantly present FeII species on the dormant side of the ATRP equilibrium. This orthogonal copolymerization by a benign iron catalyst opens up new pathways to biocompatible polymerization procedures broadening the scope of ATRP applications.

Hybrid Copolymerization of Ethylene Oxide and tert-Butyl Methacrylate with Organocatalyst

Hybrid copolymerization of structurally different, reactivity and mechanism distinct monomers (e.g., cyclic and vinyl type monomers) is of great interest and challenge for both academic research and practical application. Herein, ethylene oxide-co-tert-butyl methacrylate-co-poly(ethylene glycol) benzyl methacrylate (EO-co-BMA-co-bPEO), a statistical copolymer was synthesized via hybrid copolymerization of EO and BMA using an uncharged, non-nucleophilic organobase t-BuP₄ as the catalyst. Detailed characterizations indicate that hybrid copolymerization of ethylene oxide and vinyl monomer forms a statistical copolymer concurrently with the transesterification of tert-butyl group and oligomer PEO anions. The application of the copolymer as all solid lithium-ion battery polymer electrolyte was investigated by detecting the ionic conductivity (σ) with electrical impedance spectrum measurement.

Recent progress in the construction of polymers with advanced chain structures via hybrid, switchable, and cascade chain-growth polymerizations

Recent progress of hybrid, switchable, and cascade chain-growth polymerizations for the preparation of polymers with advanced chain structures with diverse compositions has been summarized.

Dithiocarbamate-mediated controlled copolymerization of ethylene with cyclic ketene acetals towards polyethylene-based degradable copolymers

In this article, degradable polyethylene (PE)-based copolymers containing ester units in the backbone were prepared through the hybrid copolymerization of ethylene and cyclic ketene acetals (CKAs) mediated by dithiocarbamate successfully.

tert-Butyl Esters as Potential Reversible Chain Transfer Agents for Concurrent Cationic Vinyl-Addition and Ring-Opening Copolymerization of Vinyl Ethers and Oxiranes

tert-Butyl esters are demonstrated to function as chain transfer agents (CTAs) in the cationic copolymerization of vinyl ether (VE) and oxirane via concurrent vinyl-addition and ring-opening mechanisms. In the copolymerization of isopropyl VE and isobutylene oxide (IBO), the IBO-derived propagating species reacts with tert-butyl acetate to generate a copolymer chain with an acetoxy group at the ω-end. This reaction liberates a tert-butyl cation; hence, a polymer chain with a tert-butyl group at the α-end is subsequently generated. Other tert-butyl esters also function as CTAs, and the substituent attached to the carbonyl group affects the chain transfer efficiency. In addition, ethyl acetate does not function as a CTA, which suggests the importance of the liberation of a tert-butyl cation for the chain transfer process. Chain transfer reactions by tert-butyl esters potentially occur reversibly through the reaction of the propagating cation with the ester group at the ω-end of another chain.

Synthesis of Poly(Dimethylmalic Acid) Homo- and Copolymers to Produce Biodegradable Nanoparticles for Drug Delivery: Cell Uptake and Biocompatibility Evaluation in Human Heparg Hepatoma Cells

Hydrophobic and amphiphilic derivatives of the biocompatible and biodegradable poly(dimethylmalic acid) (PdiMeMLA), varying by the nature of the lateral chains and the length of each block, respectively, have been synthesized by anionic ring-opening polymerization (aROP) of the corresponding monomers using an initiator/base system, which allowed for very good control over the (co)polymers' characteristics (molar masses, dispersity, nature of end-chains). Hydrophobic and core-shell nanoparticles (NPs) were then prepared by nanoprecipitation of hydrophobic homopolymers and amphiphilic block copolymers, respectively. Negatively charged NPs, showing hydrodynamic diameters (Dh) between 50 and 130 nm and narrow size distributions (0.08 < PDI < 0.22) depending on the (co)polymers nature, were obtained and characterized by dynamic light scattering (DLS), zetametry, and transmission electron microscopy (TEM). Finally, the cytotoxicity and cellular uptake of the obtained NPs were evaluated in vitro using the hepatoma HepaRG cell line. Our results showed that both cytotoxicity and cellular uptake were influenced by the nature of the (co)polymer constituting the NPs.

Organocatalytic sequential ring-opening polymerization of a cyclic ester and anionic polymerization of a vinyl monomer

Organocatalysis has provided new tools for making block copolymers, in particular active species able to polymerize monomers of different chemical nature such as cyclic esters, cyclic carbonates and epoxides. We report herein the first example of an organocatalytic active species able to polymerize sequentially a cyclic ester, ε-decalactone, and a vinyl monomer, methyl methacrylate. The resulting block copolymer shows the properties of thermoplastic elastomers.

Highly Branched Copolymers with Degradable Bridges for Antifouling Coatings

The antifouling properties of traditional self-polishing marine antifouling coatings are mainly achieved based on their hydrolysis-sensitive side groups or the degradable polymer main chains. Here, we prepared a highly branched copolymer for self-polishing antifouling coatings, in which the primary polymer chains are bridged by degradable fragments (poly-ε-caprolactone, PCL). Owing to the partial or complete degradation of PCL fragments, the remaining coating on the surface can be broken down and eroded by seawater. Finally, the polymeric surface is self-polished and self-renewed. The designed highly branched copolymers were successfully prepared by reversible complexation mediated polymerization (RCMP), and their primary main chains had an M_n of approximately 3410 g·mol^-1. The hydrolytic degradation results showed that the degradation of the copolymer was controlled, and the degradation rate increased with increasing contents of degradable fragments. The algae settlement assay tests indicated that the copolymer itself has some antibiofouling ability. Moreover, the copolymer can serve as a controlled release matrix for antifoulant 4,5-dichloro-2-octylisothiazolone (DCOIT), and the release rate increases with the contents of degradable fragments. The marine field tests confirmed that these copolymer-based coatings exhibited excellent antibiofouling ability for more than 3 months. The current copolymer is derived from commonly used monomers and an easily conducted polymerization method. Hence, we believe this method may offer innovative insights into marine antifouling applications.

Tandem Unzipping and Scrambling Reactions for the Synthesis of Alternating Copolymers by the Cationic Ring-Opening Copolymerization of a Cyclic Acetal and a Cyclic Ester

Cationic copolymerization of different types of monomers, 4-hydroxybutyl vinyl ether (HBVE) and ε-caprolactone (CL), was explored using EtSO₃H as an acid catalyst, producing copolymers with a remarkably wide variety of compositions and sequences. In the initial stage of the reaction, HBVE was unexpectedly isomerized to 2-methyl-1,3-dioxepane (MDOP), followed by concurrent copolymerization of MDOP and CL via active chain end and activated monomer mechanisms, respectively. The compositions and sequences of the copolymers were tunable, depending on the initial monomer concentrations. Moreover, a unique method was developed for transforming a copolymer with no CL homosequences into an "alternating" copolymer by removing MDOP from the system using a vacuum pump. This was achieved by the tandem reactions of depolymerization (unzipping) and random transacetalization (scrambling) under thermodynamic control. Specifically, the unzipping of HBVE homosequences proceeded at the oxonium chain end until a nondissociable ester bond emerged next to the chain end, while the scrambling of the main chain via transacetalization transferred midchain HBVE homosequences into the polymer chain end.

Polypropylene Glycol-Polyoxytetramethylene Glycol Multiblock Copolymers with High Molecular Weight: Synthesis, Characterization, and Silanization

The high crystallization at room temperature and high cost of polyoxytetramethylene glycol (PTMG) have become obstacles to its application. To overcome these problems, a segment of PTMG can be incorporated into a block copolymer. In this work, polypropylene (PPO) glycol-polyoxytetramethylene (PPO-PTMG) multiblock copolymers were designed and synthesized through a chain extension between hydroxyl (OH)-terminated PPO and PTMG oligomers. The chain extenders, feed ratios of the catalyst/chain extender/OH groups, reaction temperature, and time were optimized several times to obtain a PPO-PTMG with low crystallization and high molecular weight. Multiblock copolymers with low crystallization and high average molecular weight (M_n = 1.0–1.4 × 10⁴ Dalton) were harvested using m-phthaloyl chloride as the chain extender. The OH-terminated PPO-PTMG multiblock copolymer with high M_n and a functionality near two was further siliconized by 3-isocyanatopropyltrimethoxysilane to synthesize a novel silyl-terminated polyether. This polyether has an appropriate vulcanizing property and potential applications in sealants/adhesive fields.

Studying the Ring-Opening Polymerization of 1,5-Dioxepan-2-one with Organocatalysts

Three different organocatalysts, namely, 1-tert-butyl-4,4,4-tris(dimethylamino)-2,2-bis[tris (dimethylamino) phosphoranylidenamino]-2Λ5,4Λ5-catenadi(phosphazene) (t-BuP4), 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) and 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), have been used as 1,5-dioxepan-2-one (DXO) ring-opening polymerization (ROP) catalysts at varied reaction conditions. 1H NMR spectra, size exclusion chromatography (SEC) characterizations, and kinetic studies prove that the (co)polymerizations are proceeded in a controlled manner with the three organocatalysts. It is deduced that t-BuP4 and DBU catalysts are in an initiator/chain end activated ROP mechanism and TBD is in a nucleophilic ROP mechanism.

Dynamic surface antifouling: mechanism and systems

Marine biofouling is a global problem today. High efficiency and eco-friendly antifouling systems are in pressing need. In recent years, we have proposed the concept of dynamic surface antifouling (DSA). That is, a continuously changing surface can effectively prevent marine fouling organisms from landing and adhesion. Based on this strategy, we developed coatings with dynamic surfaces by using degradable polymers including polyester-polyurethane, modified polyester and poly(ester-co-acrylate). They exhibit tunable renewability, and excellent antifouling and mechanical performance. Moreover, the polymers can serve as carrier and controlled release systems of antifoulants so that they have long service life. This paper reviews the progress and trends in marine anti-biofouling, and presents the mechanism and systems of DSA.

N-Heterocyclic olefins and thioureas as an efficient cooperative catalyst system for ring-opening polymerization of δ-valerolactone

An organocatalytic ring-opening polymerization of δ-valerolactone has been developed.

Controlled cationic copolymerization of vinyl monomers and cyclic acetals via concurrent vinyl-addition and ring-opening mechanisms: the systematic study of structural effects on the copolymerization behavior

The effects of the structures of cyclic acetals on the copolymerization behavior were systematically investigated in the cationic copolymerization with vinyl ethers.

Hybrid copolymerization via mechanism interconversion between radical vinyl-addition and anion ring-opening polymerization

Here, we report a new hybrid copolymerization via an interconvertible living free radical and anion ring-opening polymerization mechanism, in which the copolymerization of cyclic monomers and vinyl-type monomers can be achieved.

The functionalization of poly(ε-caprolactone) as a versatile platform using ε-(α-phenylseleno) caprolactone as a monomer

This paper describes a novel ε-caprolactone monomer modified by a phenylseleno group at the α-position of the carbonyl.

Alkali metal complex-mediated ring-opening polymerization of rac-LA, ε-caprolactone, and δ-valerolactone

Catalytic ring opening polymerization (ROP) of rac-lactide, ε-caprolactone, and δ-valerolactone using alkali metal (Li, Na, K) complexes as competent catalysts are reported.

The influence of the substituents of oxiranes on copolymerization with vinyl ethers via concurrent cationic vinyl-addition and ring-opening mechanisms

The effects of oxirane substituents on the cationic copolymerization with vinyl ethers are discussed in terms of the reactivities of monomers and propagating species.

Phosphazene-catalyzed oxa-Michael addition click polymerization

This paper reports a new type of click chemistry via a phosphazene bases-catalyzed oxa-Michael addition of an alcohol to an acrylate.

Anionic Polymerization of Styrene and 1,3-Butadiene in the Presence of Phosphazene Superbases

The anionic polymerization of styrene and 1,3-butadiene in the presence of phosphazene bases (t-BuP₄, t-BuP₂ and t-BuP₁), in benzene at room temperature, was studied. When t-BuP₁ was used, the polymerization proceeded in a controlled manner, whereas the obtained homopolymers exhibited the desired molecular weights and narrow polydispersity (Ð < 1.05). In the case of t-BuP₂, homopolymers with higher than the theoretical molecular weights and relatively low polydispersity were obtained. On the other hand, in the presence of t-BuP₄, the polymerization of styrene was uncontrolled due to the high reactivity of the formed carbanion. The kinetic studies from the polymerization of both monomers showed that the reaction rate follows the order of [t-BuP₄]/[sec-BuLi] >>> [t-BuP₂]/[sec-BuLi] >> [t-BuP₁]/[sec-BuLi] > sec-BuLi. Furthermore, the addition of t-BuP₂ and t-BuP₁ prior the polymerization of 1,3-butadiene allowed the synthesis of polybutadiene with a high 1,2-microstructure (~45 wt %), due to the delocalization of the negative charge. Finally, the one pot synthesis of well-defined polyester-based copolymers [PS-b-PCL and PS-b-PLLA, PS: Polystyrene, PCL: Poly(ε-caprolactone) and PLLA: Poly(L-lactide)], with predictable molecular weights and a narrow molecular weight distribution (Ð < 1.2), was achieved by sequential copolymerization in the presence of t-BuP₂ and t-BuP₁.