Cross-Linked Liquid Crystalline Polyimides with Siloxane Units: Their Morphology and Thermal Diffusivity

Robust, Self-Healing, and Multi-Use Poly(Urethane-Urea-Imide) Elastomer as a Durable Adhesive for Thermal Interface Materials

Currently, research on thermal interface materials (TIMs) is primarily focused on enhancing thermal conductivity. However, strong adhesion and multifunctionality are also important characteristics for TIMs when pursing more stable interface heat conduction. Herein, a novel poly(urethane-urea-imide) (PUUI) elastomer containing abundant dynamic hydrogen bonds network and reversible disulfide linkages is successfully synthesized for application as a TIM matrix. The PUUI can self-adapt to the metal substrate surface at moderate temperatures (80 °C) and demonstrates a high adhesion strength of up to 7.39 MPa on aluminum substrates attributed its noncovalent interactions and strong intrinsic cohesion. Additionally, the PUUI displays efficient self-healing capability, which can restore 94% of its original mechanical properties after self-healing for 6 h at room temperature. Furthermore, PUUI composited with aluminum nitride and liquid metal hybrid fillers demonstrates a high thermal conductivity of 3.87 W m-1 K-1 while maintaining remarkable self-healing capability and adhesion. When used as an adhesive-type TIM, it achieves a low thermal contact resistance of 22.1 mm2 K W-1 at zero pressure, only 16.7% of that of commercial thermal pads. This study is expected to break the current research paradigm of TIMs and offers new insights for the development of advanced, reliable, and sustainable TIMs.

Atomistic Mechanism of Anisotropic Heat Conduction in the Liquid Crystal 4-Heptyl-4'-cyanobiphenyl: All-Atom Molecular Dynamics

All-atom molecular dynamics simulations were performed on 4-heptyl-4'-cyanobiphenyl (7CB) to study the mechanism of heat conduction in this nematic liquid crystal atomistically. To describe 7CB properly, the AMBER-type force field was optimized for the dihedral parameter of biphenyl and the Lennard-Jones parameters. The molecular dynamics calculation using the optimized force field well reproduced the experimental values of the isotropic-nematic phase transition temperature, density, and anisotropy of the thermal conductivity. Furthermore, the contributions of convection, intramolecular interaction, and intermolecular interaction to the thermal conductivity were determined by performing thermal conductivity decomposition analysis. According to the analysis, the contributions of convection, bond stretching, and bond bending interactions were higher in the direction parallel to the nematic director than that perpendicular to the director, which is the origin of the anisotropy in the nematic phase. This result indicates that the anisotropy is caused by well-aligned covalent bonds and high mobility parallel to the director. This quantitative description of the mechanism of heat conduction of 7CB is foreseen to provide new insights toward designing highly thermally conductive liquid-crystalline materials.

Depth-Resolved Characterization of Perylenediimide Side-Chain Polymer Thin Film Structure Using Grazing-Incidence Wide-Angle X-ray Diffraction with Tender X-rays

Polymers with a perylenediimide (PDI) side chain (PAc12PDI) consist of two kinds of crystalline structures with various types of orientations in a thin film. Understanding the population of the microcrystalline structure and its orientation along the thickness is strongly desired. Grazing-incidence wide-angle X-ray diffraction (GIWAXD) measurements with hard X-rays, which are generally chosen as λ = 0.1 nm, are a powerful tool to evaluate the molecular aggregation structure in thin films. A depth-resolved analysis for the outermost surface of the polymeric materials using conventional GIWAXD measurements, however, has limitations on depth resolution because the X-ray penetration depth dramatically increases above the critical angle. Meanwhile, tender X-rays (λ = 0.5 nm) have the potential advantage that the penetration depth gradually increases above the critical angle, leading to precise characterization for the population of crystallite distribution along the thickness. The population of the microcrystalline states in the PAc12PDI thin film was precisely characterized utilizing GIWAXD measurements using tender X-rays. The outermost surface of the PAc12PDI thin film is occupied by a monoclinic lattice with a = 2.38 nm, b = 0.74 nm, c = 5.98 nm, and β = 108.13°, while maintaining the c-axis perpendicular to the substrate surface. Additionally, the presence of solid substrate controls the formation of the crystallite with unidirectional orientation.

Filamentous Virus-based Assembly: Their Oriented Structures and Thermal Diffusivity

Organic polymers are generally regarded as thermal insulators because amorphous arrangement of molecular chains reduces the mean free path of heat-conducting phonons. However, recent studies indicated that single chains of polymers with highly oriented structures could have high thermal conductivity than bulk polymers because stretched polymer chains effectively conduct phonons through polymeric covalent bonds. Here, we demonstrated the possibility of non-covalent virus assembly prepared by simple flow-induced methods toward high thermal conductive polymeric materials. Films with high thermal diffusivity composed of non-covalent bond-based assemblies of liquid crystalline filamentous viruses were prepared using a simple flow-induced orientation method. Structural and thermal characterization demonstrated that highly oriented structures of the viruses in the film were attributed to the high thermal diffusivity. Our results will open attractive opportunities for biomolecular-based thermally conductive soft materials even though the assemblies are based on non-covalent bonds.

A homeotropic main-chain tolane-type liquid crystal elastomer film exhibiting high anisotropic thermal conductivity

The development of pure polymeric films with anisotropic thermal conductivities for electronic device packaging applications has attracted intense scientific attention. In order to enhance the polymeric film's normal-direction thermal conductivity, homeotropic alignment of macromolecular chains is the primary concern. One of the promising preparation strategies is to perform in situ photopolymerization of homeotropic-oriented liquid crystal monomers. In this work, we design and synthesize a novel tolane-core thiol-ene-tailed liquid crystal monomer. Benefitting from the conjugated and extended tolane π-system of the mesogenic core and length extension of the terminal aliphatic tails, the normal-to-plane thermal conductivity value and the thermal conductivity anisotropy value of the corresponding cross-linked main-chain end-on liquid crystal polymer (xMELCP) film reach 3.56 W m^-1 K^-1 and 15.0, respectively. Compared with the data of a previously reported ester-type thiol-ene xMELCP film, the two primary values of this novel tolane-type thiol-ene xMELCP material are increased dramatically by 46% and 29%, respectively.

Homeotropically-aligned main-chain and side-on liquid crystalline elastomer films with high anisotropic thermal conductivities

Homeotropically-aligned main-chain and side-on liquid3crystalline elastomer films are reported. Their thermal conductivities in the normal direction are both dramatically higher than those along the horizontal direction.

Thermal diffusivity of hexagonal boron nitride composites based on cross-linked liquid crystalline polyimides

Hexagonal boron nitride (h-BN) composites with the oriented cross-linked liquid crystalline (LC) polyimide have been developed as high thermally conductive materials. Well-dispersed h-BN composite films were obtained, as observed by scanning electron microscopy. The morphology of the composite films was further investigated in detail by the wide-angle X-ray diffraction. The obtained composite films based on the cross-linked LC polyimide showed that the polymer chains vertically aligned in the direction parallel to the films, while those based on the amorphous polyimide showed an isotropic nature. Moreover, the alignment of the cross-linked LC polyimides was maintained, even after increasing the volume fraction of h-BN. This alignment plays an important role in the effective phonon conduction between h-BN and the matrices. Indeed, the thermal diffusivity in the thickness direction of the composite films based on the LC polyimide measured by a temperature wave analysis method was increased to 0.679 mm(2) s(-1) at a 30 vol % h-BN loading, which was higher than that based on the amorphous polyimide.