Morphological Control in Aggregates of Amphiphilic Cylindrical Metal–Polymer “Brushes”

Axial assembly of AuNR for tumor theranostics via Zn2+-GSH chelation induced degradation of AuNR@ZIF-8 heterostructures

Tumor microenvironment responsive photothermal ablation is a noninvasive and accurately targeted approach for cancer therapy. Herein, an intracellular directional assembly strategy for enhanced photothermal therapy (PTT) was realized by using ZIF-8 encapsulated Au nanorod (AuNR) heterostructure as the precursor of photothermal convertible material. The ZIF-8 shell selectively degraded in tumor cells upon the chelation between GSH and Zn2+, while the as-formed Zn(SG) connected the released AuNR in end-to-end fashion. The coating of ZIF-8 shell significantly improves the stability and targeting of AuNR, and the released Zn2+ shielded the GSH binding site on the lateral side of AuNR, increased the plasmonic coupling efficiency of AuNR assembly geometer. This design enabled atomic-economical, efficient and low-side effect targeted photothermal therapy through the effective integration of heterostructures.

Hybrid Polymer Vesicles: Controllable Preparation and Potential Applications

Hybrid polymer vesicles contain functional nanoparticles (NPs) in their walls, interfaces, coronae, or cavities. NPs render the hybrid vesicles with specific physical properties, while polymers endow them with structural stability and may significantly reduce the high toxicity of NPs. Therefore, hybrid vesicles integrate fascinating multifunctions from both NPs and polymeric vesicles, which have gained tremendous attention because of their diverse promising applications. Various types of delicate hybrid polymeric vesicles with size control and tunable localization of NPs in different parts of vesicles have been constructed via in situ and ex situ strategies, respectively. Their potential applications have been widely explored, as well. This review presents the progress of block copolymer (BCP) vesicle systems containing different types of NPs including metal NPs, magnetic NPs, and semiconducting quantum dots (QDs), etc. The strategies for controlling the location of NPs within hybrid vesicles are discussed. Typical potential applications of the elegant hybrid vesicles are also highlighted.

Supramolecular Polymerization of Polymeric Nanorods Mediated by Block Copolymers

Introducing a second component is an effective way to manipulate polymerization behavior. However, this phenomenon has rarely been observed in colloidal systems, such as polymeric nanoparticles. Here, we report the supramolecular polymerization of polymeric nanorods mediated by block copolymers. Experimental observations and simulation results illustrate that block copolymers surround the polymeric nanorods and mainly concentrate around the two ends, leaving the hydrophobic side regions exposed. These polymeric nanorods connect in a side-by-side manner through hydrophobic interactions to form bundles. As polymerization progresses, the block copolymers gradually deposit onto the bundles and finally assemble into helical nanopatterns on the outermost surface, which terminates the polymerization. It is anticipated that this work could offer inspiration for a general strategy of controllable supramolecular polymerization.

Gold Nanorods: The Most Versatile Plasmonic Nanoparticles

Gold nanorods (NRs), pseudo-one-dimensional rod-shaped nanoparticles (NPs), have become one of the burgeoning materials in the recent years due to their anisotropic shape and adjustable plasmonic properties. With the continuous improvement in synthetic methods, a variety of materials have been attached around Au NRs to achieve unexpected or improved plasmonic properties and explore state-of-the-art technologies. In this review, we comprehensively summarize the latest progress on Au NRs, the most versatile anisotropic plasmonic NPs. We present a representative overview of the advances in the synthetic strategies and outline an extensive catalogue of Au-NR-based heterostructures with tailored architectures and special functionalities. The bottom-up assembly of Au NRs into preprogrammed metastructures is then discussed, as well as the design principles. We also provide a systematic elucidation of the different plasmonic properties associated with the Au-NR-based structures, followed by a discussion of the promising applications of Au NRs in various fields. We finally discuss the future research directions and challenges of Au NRs.

Asymmetric Incorporation of Silver Nanoparticles in Polymeric Assemblies by Coassembly of Tadpole-Like Nanoparticles and Amphiphilic Block Copolymers

A general approach to asymmetrically localize nanoparticles (NPs) in larger polymeric nanostructures is demonstrated by coassembly of tadpole-like silver NPs (AgNPs) and amphiphilic block copolymers (BCPs). The tadpole-like AgNPs are prepared by template synthesis using a tailor-made A(BC)₂₀ star polymer, namely poly(ethylene glycol)[poly(acrylic acid)-block-polystyrene]₂₀ [PEG(PAA-b-PS)₂₀ ], as template resulting in AgNPs decorated with twenty short PS chains and one long PEG chain, named Ag@PEG(PS)₂₀ . The asymmetric distribution of these AgNPs in various polymeric nanostructures, e.g., spherical micelles, cylindrical micelles, vesicles, and sponge phase, is achieved via coassembly of the as-prepared Ag@PEG(PS)₂₀ and PEG-b-PS in solution driven by the anisotropic nature of the Ag@PEG(PS)₂₀ . This report not only provides a new strategy for the fabrication of tadpole-like NPs but also offers opportunity for off-center distributing NPs in hybrid assemblies, which may find applications in, e.g., sensing, catalysis, and diagnostics.

Unimolecular Polypeptide Micelles via Ultrafast Polymerization of N-Carboxyanhydrides

Polypeptide micelles are widely used as biocompatible nanoplatforms but often suffer from their poor structural stability. Unimolecular polypeptide micelles can effectively address the structure instability issue, but their synthesis with uniform structure and well-controlled and desired sizes remains challenging. Herein we report the convenient preparation of spherical unimolecular micelles through dendritic polyamine-initiated ultrafast ring-opening polymerization of N-carboxyanhydrides (NCAs). Synthetic polypeptides with exceptionally high molecular weights (up to 85 MDa) and low dispersity (Đ < 1.05) can be readily obtained, which are the biggest synthetic polypeptides ever reported. The degree of polymerization was controlled in a vast range (25-3200), giving access to nearly monodisperse unimolecular micelles with predictable sizes. Many NCA monomers can be polymerized using this ultrafast polymerization method, which enables the incorporation of various structural and functional moieties into the unimolecular micelles. Because of the simplicity of the synthesis and superior control over the structure, the unimolecular polypeptide micelles may find applications in nanomedicine, supermolecular chemistry, and bionanotechnology.

Crystallization-Driven Two-Dimensional Self-Assembly of Amphiphilic PCL-b-PEO Coated Gold Nanoparticles in Aqueous Solution

This Letter reports the first formation of free-standing plasmonic monolayer nanosheets by the self-assembly of AuNPs without assistance from a planar interface. The strategy involves the coating of poly(caprolactone)-b-poly(ethylene oxide) (PCL-b-PEO) diblock copolymers on AuNPs, followed by two-dimensional (2D) self-assembly of the resultant amphiphilic AuNPs in aqueous phase. The crystallization of the PCL blocks, affected by their grafting density and radius of gyration, drives the formation of the AuNP nanosheets, which undergoes a growth process of individual micelles to small nanosheets and eventually to large sheets. Due to the plasmonic coupling of AuNPs in close proximity, the AuNP nanosheets exhibit near-infrared (NIR) absorption with the maximum at about 700 nm. This study not only brings a new approach toward polymer-AuNP hybrid superstructures in solution, but also provides a new system for fundamental study on 2D self-assembly of AuNPs.

Hairy cylinders based on a coil-comb-coil copolymer

We present the preparation and possible formation mechanism of hairy cylinders self-assembled from a coil-comb-coil copolymer.

Dual-tuning multidimensional superstructures based on a T-shaped molecule: vesicle, helix, membrane and nanofiber-constructed gel

Dual-tuning self-assembly of Fmoc–Gly (a T-shape molecule) supramolecular self assembly was firstly reported here.

Silkworm cocoons by cylinders self-assembled from H-shaped alternating polymer brushes

We report a novel silkworm cocoon-like nanostructure based on the 3D hierarchical self-assembly of cylinders which are spontaneously formed by an H-shaped polymer brush comprising a disulfide-bridged spacer and two brushes with alternating PEG and PCL side chains. Crystalline of PCL between adjacent cylinders bridges cylinders.

Spherical blackberry-type capsules containing block copolymer aggregates

The design, preparation, and properties of nanosized blackberry-like structures are described. These capsules are composed of two layers of individual block copolymer aggregates, relatively large core vesicles onto which is deposited a layer of smaller vesicles or micelles. The composition of the adjacent layers is such as to ensure strong electrostatic interactions between them. The core vesicles are typically composed of either PS-b-P4VP with a positively charged corona or of PS-b-PAA with a negatively charged corona, and are surrounded by a layer of smaller, oppositely charged block copolymer vesicles or micelles. These composite structures bear a strong resemblance to blackberries, hence the proposed name. The blackberry structures can be prepared in solution or on a flat surface, for example, a silicon wafer. Four compositional possibilities for the blackberries structures were studied, in which the positively or negatively charged core vesicles are covered either by a layer of oppositely charged micelles or by vesicles. These structures represent the earliest stage of a layer-by-layer approach of small spherical aggregates onto a larger spherical hollow core. The strong interaction between the contacting layers is achieved by electrostatic interactions or by complementary acid-base properties, for example, H-bonding. These multicompartmented capsules could be used potentially as delivery vehicles for multiple components; each layer of the capsules could be loaded with hydrophobic (in the core of the micelles or vesicle wall) or hydrophilic molecules (in the vesicle cavity). The overall size of such structures can vary, but in any case can be kept below 1 μm.

Planar multilayer assemblies containing block copolymer aggregates

The design, preparation, and properties of planar multilayer structures composed of various combinations of sequentially deposited polyelectrolyte (PE) chains and self-assembled layers of individual block copolymer aggregates (vesicles, micelles, or large compound micelles (LCMs)) are described. The aggregates contain negatively or positively charged corona chains while the PE multilayers contain alternating polyanionic or polycationic chains deposited on silicon wafers. The final structures consist of combinations of layers of various charged species: multilayers of alternating PEs of poly(allyl hydrochloride) (PAH) and poly(acrylic acid) (PAA) as well as vesicles, micelles, or large compound micelles of ionized poly(styrene)-b-poly(4-vinylpyridine) (PS-b-P4VP) or of poly(styrene)-b-poly(acrylic acid) (PS-b-PAA). Two types of layer-by-layer (LbL) multilayer structures were studied: individual aggregate layers sandwiched between PE multilayers and layers of individual aggregates of various morphologies and of different corona chain charges, deposited on top of each other without intermediate multilayers or individual layers of PEs. The strong interactions between the successive layers are achieved mainly by electrostatic attraction between the oppositely charged layers. The planar LbL multilayers containing block copolymer aggregates could, potentially, be used as carriers for multiple functional components; each aggregate layer could be loaded with hydrophobic (in the core of the micelles, LCMs, or vesicle walls) or hydrophilic functional molecules (in the vesicular cavities). The overall thickness of such planar LbL multilayers can be controlled precisely and can vary from tens of nanometers to several micrometers depending on the number of layers, the sizes of the aggregates, and the complexity of the structure.

Direct preparation of PNIPAM coating gold nanoparticles by catechol redox and surface adhesion chemistry

The water-stable branched gold nanoparticles coated with a PNIPAM shell allow pyrene SERS detection at a concentration of 0.13 μM.

Structural and equilibrium effects of the surface passivant on the stability of Au nanorods

Au nanomaterials are well-known for their optical properties, where Au nanorods have demonstrated unique capabilities because of their readily tunable size and shape. Unfortunately, functionalization of the material surface is challenging because of their lack of stability after only a few purification cycles. Here, we demonstrate that enhanced Au-nanorod stability can be achieved by purifying the materials using dilute cetyltrimethylammonium bromide (CTAB) wash solutions. To this end, purifying the materials in such a manner shifts the passivant on/off equilibrium to maintain surfactant adsorption to the metal surface, leading to enhanced stability. Interestingly, from this study, a bimodal distribution of Au nanorods was evident, where one species was prone to bulk aggregation, whereas the second population remained stable in solution. This likely arose from defects within the CTAB bilayer at the nanorod surface, resulting in selective material aggregation. For this, those structures with high numbers of defects aggregated, whereas nanorods with a more pristine bilayer remained stable. Coating of the Au nanorods using polyelectrolytes was also explored for enhanced stability, where the composition of the anionic polymer played an important role in controlling materials stability. Taken together, these results demonstrate that the stability of Au nanorods can be directly tuned by the solvent-exposed surface structure, which could be manipulated to allow for the extensive material functionalization that is required for the generation of nanoplatforms with multiple applications.