Novel Method to Assess the Molecular Weights of Fluoropolymers by Radical Copolymerization of Vinylidene Fluoride with Various Fluorinated Comonomers Initiated by a Persistent Radical

Cobalt-Mediated Radical Copolymerization of Vinylidene Fluoride and 2,3,3,3-Trifluoroprop-1-ene

New copolymers based on vinylidene fluoride (VDF) and 2,3,3,3-tetrafluoroprop-1-ene (1234yf) were synthesized by organometallic-mediated radical copolymerization (OMRcP) using the combination of bis(tert-butylcyclohexyl) peroxydicarbonate initiator and bis(acetylacetonato)cobalt(II), (Co(acac)2) as a controlling agent. Kinetics studies of the copolymerization of the fluoroalkenes copolymers were monitored by GPC and 19F NMR with molar masses up to 12,200 g/mol and dispersities (Đ) ranging from 1.33 to 1.47. Such an OMRcP behaves as a controlled copolymerization, evidenced by the molar mass of the resulting copolymer-monomer conversion linear relationship. The reactivity ratios, ri, of both comonomers were determined by using the Fineman-Ross and Kelen-Tüdos fitting model leading to rVDF = 0.384 ± 0.013 and r1234yf = 2.147 ± 0.129 at 60 °C, showing that a lower reactivity of VDF integrated in the copolymer to a greater extent leads to the production of gradient or pseudo-diblock copolymers. In addition, the Q (0.03) and e (0.06 and 0.94) parameters were assessed, as well as the dyad statistic distributions and mean square sequence lengths of PVDF and P1234yf.

Synthesis, aqueous solution behavior and self-assembly of a dual pH/thermo-responsive fluorinated diblock terpolymer

The synthesis of fluorinated dual-responsive block terpolymers via sequential reversible addition–fragmentation chain transfer (RAFT) polymerization is presented.

Phosphorus-Containing Fluoropolymers: State of the Art and Applications

Several strategies to synthesize fluorinated (co)polymers containing phosphorus groups and their applications are reviewed. First, original fluoromonomers bearing phosphorus atoms are supplied from relevant routes. They may possess fluorinated atoms linked to the ethylenic carbon atoms with different structures, such as F₂C═CF- or H₂C═C(CF₃)- and a phosphonated ω-function adjacent to an aliphatic or aromatic linker, while other monomers display a difluoromethylene dialkylphosphonate end group such as -CF₂-P(O)(OR)₂. Then, fluorinated copolymers were obtained according to various pathways: (i) by radical homopolymerization of monomers containing both fluorine and phosphorus atoms, (ii) by direct radical copolymerization of fluoromonomers and phosphorus-based monomers, or (iii) by chemical modification of fluorinated copolymers with phosphorus-based reactants. Conventional radical and controlled (or reversible deactivation radical polymerization, RDRP) copolymerization have also been explored. As for the chemical change of halogenated polymers, either conventional organic reactions (e.g., Arbuzov reaction from a chlorine, iodine, or bromine atom) or radiation grafting with specific monomers led to graft copolymers composed of a fluorinated backbone and phosphonated grafts. This second part also details aliphatic and aromatic fluorophosphorous copolymers in which dialkylphosphonates or phosphonic acids are reported. Finally, since fluorine and phosphorus atoms bring complementary relevant properties (low refractive index and dielectric constants, chemical inertness, high electrochemical, soils, and heat resistances, electroattractivity from fluorine atoms and high acidity, complexation, anticorrosion, flame retardant, and biomedical properties from phosphorus ones), synergetic characteristics have been targeted. These properties allow such fluoro-phosphorus (co)polymers to be used as novel materials involved in various applications such as polymer exchange membranes for fuel cells, self-etching adhesives for dental materials, adhesion promoters, flame retardants, polymer blends, and anticorrosive coatings.

Synthesis of poly[oligo(hexafluoropropylene oxide) perfluoroisopropenylether (PIPE)] graft copolymers with vinylidene fluoride (VDF) using CF3 radicals

The synthesis of poly(vinylidene fluoride)-graft-oligomeric hexafluoropropylene oxide copolymers [poly[VDF-g-oligo(HFPO)-PIPE] is provided, having glass transitions of ca. −82 °C and respective water and hexadecane contact angles of ca. 133° and 70°.

Use of poly(vinylidene fluoride-co-vinyl dimethylphosphonate) copolymers for efficient extraction of valuable metals

The radical copolymerisation of vinylidene fluoride (VDF) with vinyl dimethyl phosphonate (VDMP) initiated by various kinds of initiators is presented.

Kinetics of radical copolymerization of vinylidene fluoride with tert-butyl 2-trifluoromethyl acrylate: a suitable pair for the synthesis of alternating fluorinated copolymers

A study of the copolymerization kinetics of vinylidene fluoride with tert-butyl 2-trifluoromethyl acrylate: a suitable pair for the synthesis of alternating fluorinated copolymers.

Synthesis and properties of poly(trifluoroethylene)viaa persistent radical mediated polymerization of trifluoroethylene

Poly(trifluoroethylene) exhibiting excellent thermal stability was synthesized by the radical polymerization of trifluoroethylene initiated by an innovative persistent radical.

Poly(vinylidene fluoride) Containing Phosphonic Acid as Anticorrosion Coating for Steel

Vinylidene fluoride (VDF)-based copolymers bearing pendant phosphonic acid function for potential application as anticorrosion coatings were synthesized via free radical copolymerization of VDF with a new phosphorus containing 2-trifluoromethacrylate monomer, (dimethoxyphosphoryl)methyl 2-(trifluoromethyl)acrylate (MAF-DMP). MAF-DMP was prepared from 2-trifluoromethacrylic acid in 60% overall yield. Radical copolymerizations of VDF with MAF-DMP initiated by tert-amyl peroxy-2-ethylhexanoate at varying ([VDF]₀/[MAF-DMP]₀) feed ratios led to several poly(VDF-co-MAF-DMP) copolymers having different molar percentages of VDF (79-96%) and number-average molecular weights (M_n's) up to ca. 10 000 g mol^-1 in fair yields (47-53%). Determination of the composition and microstructure of all the synthesized copolymers was done by ¹H and ¹⁹F NMR spectroscopies. The monomer reactivity ratios of this new VDF/MAF-DMP pair were also determined (r_VDF = 0.76 ± 0.34 and r_MAF-DMP = 0 at 74 °C). The resulting poly(VDF-co-MAF-DMP) copolymers exhibited high melting temperature (162-171 °C, with respect to the VDF content), and the degree of crystallinity reached up to 51%. Finally, the pendant dimethyl phosphonate ester groups of the synthesized poly(VDF-co-MAF-DMP) copolymer were quantitatively hydrolyzed, giving rise to novel phosphonic acid-functionalized PVDF (PVDF-PA). In comparison to hydrophobic poly(VDF-co-MAF-DMP) copolymers (the water contact angle, WCA, was 98°), the hydrophilic character of the PVDF-PA was found to be surprisingly rather pronounced, exhibiting low WCA (15°). Finally, steel plates coated with PVDF-PA displayed satisfactory anticorrosion properties under simulated seawater environment.

Differences in electroactive terpolymers based on VDF, TrFE and 2,3,3,3-tetrafluoropropene prepared by batch solution and semi-continuous aqueous suspension polymerizations

In the search for new fluorinated electroactive copolymers, 0–8 mol% of 2,3,3,3-tetrafluoropropene (1234yf) was terpolymerized with vinylidene fluoride (VDF) and trifluoroethylene (TrFE).

Synthesis, characterization, and thermal and surface properties of co- and terpolymers based on fluorinated α-methylstyrenes and styrene

Conventional bulk radical co- and terpolymerizations of α-fluoromethylstyrene (FMST) or/and α-trifluoromethylstyrene (TFMST) with styrene (ST) initiated by α,α′-azobis(isobutyronitrile) (AIBN) are presented.

Ferroelectric fluorinated copolymers with improved adhesion properties

Modified fluorinated electroactive poly(VDF-co-TrFE) copolymers with improved adhesion properties, on glass or metal substrates, are presented.

Photomediated Controlled Radical Polymerization and Block Copolymerization of Vinylidene Fluoride

This review summarizes recent research on novel photochemical methods for the initiation and control of the polymerization of main chain fluorinated monomers as exemplified by vinylidene fluoride (VDF) and for the synthesis of their block copolymers. Such reactions can be carried out at ambient temperature in glass tubes using visible light. Novel, original protocols include the use of hypervalent iodide carboxylates alone or in conjunction with molecular iodine, as well as the use of photoactive transition metal carbonyls in the presence of alkyl, fluoroalkyl, and perfluoroalkyl halides. An in-depth study of the reaction parameters highlights the use of dimethyl carbonate as a preferred polymerization solvent and outlines the structure-property relationship for hypervalent iodide carboxylates and halide initiators in both the free radical and iodine degenerative transfer controlled radical polymerization (IDT-CRP) of VDF. Finally, the rational selection of metal carbonyls that are successful not only as IDT mediators but, more importantly, in the quantitative activation of both PVDF-CH2-CF2-I and PVDF-CF2-CH2-I chain ends toward the synthesis of well-defined PVDF block copolymers is presented.

The functionalization of fluoroelastomers: approaches, properties, and applications

This review seeks to give an overview of different approaches to prepare functional fluoroelastomers for modern industries.

Kinetic and mechanistic aspects of the iodine transfer copolymerization of vinylidene fluoride with 2,3,3,3-tetrafluoro-1-propene and functionalization into ω-hydroxy fluorinated copolymers

ω-Hydroxy functionalized poly(vinylidene fluoride) prepared in a water-based non-fluorinated solvent by iodine transfer copolymerization VDF and 1234yf.

Methods to prepare quaternary ammonium groups-containing alternating poly(chlorotrifluoroethylene-alt-vinyl ether) copolymers

Quaternary ammonium groups-containing alternating poly(chlorotrifluoroethylene-alt-vinyl ether) copolymers were synthesized using post-polymerization functionalization methods such as azide–alkyne cycloaddition and cyclocarbonate–amine reaction.

Introducing a new radical trifluoromethylation reagent

Radical trifluoromethylations of aromatic molecules have been achieved by using a persistent perfluoroalkyl radical as a precursor of the CF₃ radical. The process works efficiently in terms of chemical yields to produce mixtures of regioisomeric trifluoromethylated compounds.

Radical copolymerisation of chlorotrifluoroethylene with isobutyl vinyl ether initiated by the persistent perfluoro-3-ethyl-2,4-dimethyl-3-pentyl radical

The radical copolymerisation of chlorotrifluoroethylene with isobutyl vinyl ether initiated by trifluoromethyl radicals generated by β-scission of a persistent radical is reported.

SET-LRP of semifluorinated acrylates and methacrylates

For the first time SET-LRP of 1H,1H,2H,2H-perfluorooctyl acrylate, 2,2,3,3,4,4,4-heptafluorobutyl acrylate, 1H,1H,5H-octafluoropentyl acrylate and 1H,1H,5H-octafluoropentyl methacrylate in 2,2,2-trifluoroethanol as the solvent at 25 °C for acrylates and at 50 °C for methacrylate was accomplished.