Dynamics of Poly(ethylene oxide) around Its Melting Temperature

Amyloid peptide - synthetic polymer blends with enhanced mechanical and biological properties

Interest in utilizing amyloids to develop biomaterials is increasing due to their potential for biocompatibility, unique assembling morphology, mechanical stability, and biophysical properties. However, challenges include the complexity of peptide chemistry and the practical techniques required for processing amyloids into bulk materials. In this work, two decapeptides with fibrillar and globular morphologies were selected, blended with poly(ethylene oxide), and fabricated into composite mats via electrospinning. Notable enhancements in mechanical properties were observed, attributed to the uniform distribution of the decapeptide assemblies within the PEO matrix. Morphological differences, such as the production of thinner nanofibers, are attributed to the increased conductivity from the zwitterionic nature of the decapeptides. Blend rheology and post-processing analysis revealed how processing might affect the amyloid aggregation and secondary structure of the peptides. Both decapeptides demonstrated good biocompatibility and strong antioxidant activity, indicating their potential for safe and effective use as biomaterials. By evaluating these interdependencies, this research lays the foundation for understanding the structure-property-processing relationships of peptide-polymer blends and highlights the strong potential for developing applications in biotechnology.

Folic acid in carboxymethylcellulose/polyethylene oxide electrospun nanofibers: preparation, release and stability

BACKGROUND

Folic acid (FA), a synthetically produced compound analogous to vitamin B9, also referred to as vitamin folate, is an essential compound in human health and faces challenges in stability during food processing. This study explores the incorporation of FA into carboxymethylcellulose (CMC) nanofibers using electrospinning to enhance its stability.

RESULTS

In this study, optimization of both electrospinning and solution parameters facilitated the fabrication of nanofibers. Furthermore, incorporating FA into CMC/polyethylene oxide (PEO) nanofibers resulted in thinner fibers, with an average diameter of 88 nm, characterized by a flat shape and smooth surface. Fourier transform infrared spectroscopic analysis demonstrated substantial hydrogen bonding interactions between FA and the polar groups present in CMC. This interaction contributed to an encapsulation efficiency of 94.5%, with a yield exceeding 87%. Thermal analysis highlighted mutual interference between CMC and PEO, with FA enhancing the thermal stability and reducing the melting temperatures and enthalpies of PEO, while also increasing the reaction heats of CMC. The encapsulated FA remained stable in acidic conditions, with only 6% degradation over 30 days, demonstrating the efficacy of CMC/PEO nanofibers in safeguarding FA against acidic environments. Moreover, the nanofibers provided a protective barrier against UV radiation, thereby preserving the stability of FA.

CONCLUSION

This study emphasizes the efficacy of CMC/PEO nanofibers as a protective matrix against FA degradation. The findings indicate that this innovative approach could significantly diversify the applications of FA in food fortification, addressing concerns regarding its vulnerability to temperature and hydrolysis reactions during food processing. © 2024 Society of Chemical Industry.

Lead Bromide Complex in Tri-n-Octylphosphine Oxide Matrix with Bright Photoluminance and Exceptional Thermoplasticity

Metal halide materials have recently drawn increasing research interest for their excellent opto-electronic properties and structural diversity, but their resulting rigid structures render them brittle and poor formability during manufacturing. Here we demonstrate a thermoplastic luminant hybrid lead halide solid by integrating lead bromide complex into tri-n-octylphosphine oxide (TOPO) matrix. The construction of the hybrid materials can be achieved by a simple dissolution process, in which TOPO molecules act as the solvents and ligands to yield the monodispersed clusters. The combination of these functional units enables the near-room-temperature melt-processing of the materials into targeted geometry by simple molding or printing techniques, which offer possibilities for fluorescent writing inks with outstanding self-healing capacity to physical damage. The intermarriage between metal halide clusters with functional molecules expands the range of practical applications for hybrid metal halide materials.

Materials for Smart Soft Actuator Systems

In contrast to conventional hard actuators, soft actuators offer many vivid advantages, such as improved flexibility, adaptability, and reconfigurability, which are intrinsic to living systems. These properties make them particularly promising for different applications, including soft electronics, surgery, drug delivery, artificial organs, or prosthesis. The additional degree of freedom for soft actuatoric devices can be provided through the use of intelligent materials, which are able to change their structure, macroscopic properties, and shape under the influence of external signals. The use of such intelligent materials allows a substantial reduction of a device's size, which enables a number of applications that cannot be realized by externally powered systems. This review aims to provide an overview of the properties of intelligent synthetic and living/natural materials used for the fabrication of soft robotic devices. We discuss basic physical/chemical properties of the main kinds of materials (elastomers, gels, shape memory polymers and gels, liquid crystalline elastomers, semicrystalline ferroelectric polymers, gels and hydrogels, other swelling polymers, materials with volume change during melting/crystallization, materials with tunable mechanical properties, and living and naturally derived materials), how they are related to actuation and soft robotic application, and effects of micro/macro structures on shape transformation, fabrication methods, and we highlight selected applications.

The Unusual Conductivity of Na+ in PEO-Based Statistical Copolymer Solid Electrolytes: When Less Means More

The low conductivity of Na⁺ electrolytes in solid polymer electrolytes (SPEs) curtails the development of Na polymer batteries. In this study, NaClO₄ (3-24 wt %, 90-9:1 O:Na) is dissolved in statistical copolymers of ethylene oxide (EO) and propylene oxide (PO) (0-20 mol %). Remarkably, the conductivity of these SPEs increases as the concentration of Na⁺ decreases, thus departing from the usual Nernstian behavior. Using a combination of calorimetric measurements and molecular dynamic simulations, this unusual phenomenon is attributed to the presence of physical cross-links generated by Na⁺ . As a result, polymers containing a low salt concentration (3 wt %) display a drastically enhanced ionic conductivity (up to 0.2 10^-4  S cm^-1 at 25 °C), thus paving the way for the design of all-solid-state PEO-based sodium batteries operational at room temperature.

Influence of charge carrier density, mobility and diffusivity on conductivity–temperature dependence in polyethylene oxide–based gel polymer electrolytes

Determining the transport properties of charge carriers is essential to understand the factors that affect the conductivity trend of a polymer electrolyte system. In this work, charge carrier transport parameters of polyethylene oxide–based gel polymer electrolytes were estimated from fitting the Nyquist plot with the impedance equation, derived from the equivalent circuit that consists of a resistor in series with a constant phase element. The increase in electrolyte conductivity with temperatures from 303 K to 373 K is attributed to the increase of free ions, n (TPA+ cations and I¯ anions) and not to ionic mobility, μ. The decrease in μ with temperature is associated with the increase in the Stokes drag coefficient due to increase in ion collisions. This work explains how conductivity changes with number density of ions and mobility at various temperatures.

Characterization of polymeric biomedical balloon: physical and mechanical properties

Tubes from nylon 12 and Pebax 6333 resins were produced using an extrusion process. The extruded tubes were used to produce balloons for angioplasty applications. The tubes were stretched using blow molding process to produce balloons. Melt rheology behavior for nylon 12 and Pebax were studied and nylon 12 showed a more pronounced shear thinning behavior compared to Pebax. Orientations of the tubes and the balloons were assessed using Fourier transform infrared spectroscopy (FTIR) and it was found that nylon material is more sensitive to molecular orientation when stretched compared to Pebax material. Melting behavior for the tubes and balloons were investigated using dynamic scanning calorimetry (DSC). The melting temperature shifted to higher temperatures when the tubes are stretched into balloons and the shift was more pronounced for Pebax balloon than nylon. Morphology of Pebax balloon surface revealed a hybrid structure consisting of hard segments dispersed in soft segments and amorphous phases. The hard segments are crystallized polyamides that are biaxially oriented in the balloon with higher molecular orientation in the radial direction compared to axial direction. This resulted in a higher tensile strength along the radial direction compared to axial for the balloons. Dynamic mechanical analyzer (DMA) tests showed that the glass transition temperature of the nylon tubes shifted to higher temperatures (from 51 to 82 °C) during the balloon forming process, which means the nylon becomes stiffer and less flexible when formed into a balloon.

The power of architecture – cage-shaped PEO and its application as a polymer electrolyte

First reported gram-scale synthesis of a four-arm cage-shaped poly(ethylene oxide) polymer and its pioneering application as polymer electrolyte.

Direct Correlation of Single-Particle Motion to Amorphous Microstructural Components of Semicrystalline Poly(ethylene oxide) Electrolytic Films

Semicrystalline polymers constitute some of the most widely used materials in the world, and their functional properties are intimately connected to their structure on a range of length scales. Many of these properties depend on the micro- and nanoscale heterogeneous distribution of crystalline and amorphous phases, but this renders the interpretation of ensemble averaged measurements challenging. We use superlocalized widefield single-particle tracking in conjunction with AFM phase imaging to correlate the crystalline morphology of lithium-triflate-doped poly(ethylene oxide) thin films to the motion of individual fluorescent probes at the nanoscale. The results demonstrate that probe motion is intrinsically isotropic in amorphous regions and that, without altering this intrinsic diffusivity, closely spaced, often parallel, crystallite fibers anisotropically constrain probe motion along intercalating amorphous channels. This constraint is emphasized by the agreement between crystallite and anisotropic probe trajectory orientations. This constraint is also emphasized by the extent of the trajectory confinement correlated to the width of the measured gaps between adjacent crystallites. This study illustrates with direct nanoscale correlations how controlled and periodic arrangement of crystalline domains is a promising design principle for mass transport in semicrystalline polymer materials without compromising their mechanical stability.

Mechanistic insight into the improved Li ion conductivity of solid polymer electrolytes

Polymer based solid electrolytes (SEs) are envisaged as futuristic components of safer solid state energy devices. But the semi-crystalline nature and slow dynamics of the host polymer matrix are found to hamper the ion transport through the solid polymer network and hence solid state devices are still far beyond the scope of practical application. In this study, we unravel the synergistic roles of Li salt (LiClO₄) and two different polymers – polyethylene oxide (PEO) and polydimethyl siloxane (PDMS), in the Li ion transport through their solid blend based electrolyte. A detailed study using dielectric spectroscopy and thermo-mechanical analysis is conducted to understand the tunability of the PEO chain dynamics with LiClO₄ and the mechanism of hopping of Li ions by forming ion pairs with oxygen dipoles on the PEO backbone is established. Despite the lack of PDMS's capability to solvate ions and promote ion transport directly, its proper mixing within the PEO host matrix is demonstrated to enhance ion transport due to the influence of PDMS on the segmental dynamics of PEO. A detailed molecular dynamics study supported by experimental validation suggests that even inert polymers can affect the dynamics of the active host matrix and increase ion transport, leading to next generation high ionic conductivity solid matrices, and opens new avenues in designing polymer based transparent electrolytes.

The studies shown here prove that both the Li salt and ‘inert-polymer’ mixing have paramount importance in the tunability of Li ion conductivity in solid electrolytes for batteries.

Schiff base and reductive amination reactions of α-amino acids: a facile route toward N-alkylated amino acids and peptoid synthesis

Polypeptoids are a promising class of peptidomimetic polymers for applications in biotechnology, but the polymers prepared by solution polymerization have limited side-chain functionalities due to synthetic difficulty.

Multi-environment Nanocalorimeter with Electrical Contacts for Use in the Scanning Electron Microscope

We have developed a versatile nanocalorimeter sensor which allows imaging and electrical measurements of samples under different gaseous environments using the scanning electron microscope (SEM) and can simultaneously measure the sample temperature and associated heat of reaction. This new sensor consists of four independent heating/sensing elements for nanocalorimetry and eight electrodes for electrical measurements, all mounted on a 50 nm thick, 250 μm × 250 μm suspended silicon nitride membrane. This membrane is highly electron transparent and mechanically robust enabling in situ SEM observation under realistic temperatures, environmental conditions and pressures up to one atmosphere. To demonstrate this new capability, we report here on 1) in situ SEM-nanocalorimetry study of melting and solidification of polyethylene oxide, 2) the temperature dependence of conductivity of a nanowire; 3) the electron beam induced current measurements (EBID) of a nanowire in vacuum and air. Furthermore, the sensor is easily adaptable to operate in liquid environment and is compatible with most existing SEM. This versatile platform couples nanocalorimetry with in situ SEM imaging under various gaseous and liquid environments and is applicable to materials research, nanotechnology, energy, catalysis and biomedical applications.

Fluorine-free electrolytes for all-solid sodium-ion batteries based on percyano-substituted organic salts

A new family of fluorine-free solid-polymer electrolytes, for use in sodium-ion battery applications, is presented. Three novel sodium salts withdiffuse negative charges: sodium pentacyanopropenide (NaPCPI), sodium 2,3,4,5-tetracyanopirolate (NaTCP) and sodium 2,4,5-tricyanoimidazolate (NaTIM) were designed andtested in a poly(ethylene oxide) (PEO) matrix as polymer electrolytes for anall-solid sodium-ion battery. Due to unique, non-covalent structural configurations of anions, improved ionic conductivities were observed. As an example, "liquid-like" high conductivities (>1 mS cm-1) were obtained above 70 °C for solid-polymer electrolyte with a PEO to NaTCP molar ratio of 16:1. All presented salts showed high thermal stability and suitable windows of electrochemical stability between 3 and 5 V. These new anions open a new class of compounds with non-covalent structure for electrolytes system applications.

Is kinetic polymer arrest very specific to multiwalled carbon nanotubes?

In this study we have assessed, using dielectric relaxation spectroscopy (DRS), the confinement effects of the more mobile chain in partially miscible polymeric blends of PS/PVME (polystyrene/poly(vinyl methyl ether)) in the presence of anisotropically shaped MWCNTs (multiwalled carbon nanotubes). To understand if this confinement effect is very specific to MWCNTs, the characteristic dimensions of which are often close to the radius of gyration of the polymeric chains, a few other particles like spherical silver, stacked clay tactoids and platy graphene sheets at similar weight fractions were also incorporated and systematically studied. The DRS studies reveal that the more mobile chain (here PVME) experiences possibly two different environments in the presence of frozen PS and more importantly in the presence of MWCNTs at temperatures close to and not so far from the blend T_g. The presence of bimodal relaxations with a weak temperature independent faster relaxation in the blends is composition dependent (PS rich blends). Assuming that there are no chemical interactions of PVME with the particles, these confinement effects seem to be very specific to MWCNTs as the bimodal relaxations were completely absent in the case of other nanoparticles. In the case of polymer blends, when two different chains are brought together, a loss in the deformational entropy is expected due to the excluded volume interaction and chain connectivity effects. In the presence of nanoparticles, especially MWCNTs, the polymer coils are subjected to perturbation leading to entropic loss in the system, which determine the miscibility in the blends. The configurational entropy near glass transition was assessed to understand the improved miscibility due to MWCNTs in this particular blend. The length of cooperativity suggests a cooperative motion of PS and PVME over shorter length scales in the case of MWCNTs as compared to other particles. This also hints at perturbed PVME motion in the network of MWCNTs. Taken together, our study reveals that the kinetic PVME arrest results in two different environments and is dependent on the effective concentration of MWCNTs in the blends.

Azeotrope enabled polymerization of ethylene oxide

We report a synthetic route for poly(ethylene oxide) (PEO) using azeotropic distillation to remove water and drive the equilibrium of an alkyl hydroxide and potassium hydroxide to potassium alkoxide, avoiding the use of pyrophoric organometallics.