Flipping the Pressure- and Temperature-Dependent Cloud-Point Behavior in the Cononsolvency System of Poly(N-isopropylacrylamide) in Water and Ethanol

Thermoresponsive Polymers under Pressure with a Focus on Poly(N-isopropylacrylamide) (PNIPAM)

Pressure is a key variable in the phase behavior of responsive polymers, both for applications and from a fundamental point of view. In this feature article, we review recent developments, particularly applications of neutron techniques such as small-angle neutron scattering (SANS) and quasi-elastic neutron scattering (QENS), across the temperature-pressure phase diagram. These are complemented by kinetic SANS experiments following pressure jumps. In the prototype system poly(N-isopropylacrylamide) (PNIPAM), QENS revealed the pressure-dependent characteristics of hydration water around the lower critical solution temperature transition. The size, water content, and inner structure of the mesoglobules formed in the two-phase region depend strongly on pressure, as shown by SANS. Beside these changes at the phase transition, the mesoglobule formation at low pressure is determined by kinetic factors, namely the formation of a polymer-rich, rigid shell, which hampers further growth by coalescence. At high pressure, in contrast, the growth proceeds by diffusion-limited coalescence without any kinetic hindrance. The disintegration of the mesoglobules evolves either via chain release from their surface or via swelling, depending on the osmotic pressure of the water. Moreover, we report on the profound influence of pressure on the cononsolvency effect. In the temperature-pressure frame, the one-phase region is hugely expanded upon the addition of the cosolvent methanol. SANS experiments unveil the enthalpic and entropic contributions to the effective Flory-Huggins interaction parameter between the segments and the solvent mixture. QENS experiments demonstrate an increase in polymer associated water with pressure, whereas methanol is released. Correspondingly, the solvent phase becomes enriched in methanol, providing a mechanism for the breakdown of cononsolvency at a high pressure. Finally, we outline future opportunities for high-pressure studies of thermoresponsive polymers, with a focus on neutron methods.

Cononsolvency of the responsive polymer poly(N-isopropylacrylamide) in water/methanol mixtures: a dynamic light scattering study of the effect of pressure on the collective dynamics

The collective dynamics of 25 wt% poly(N-isopropylacrylamide) (PNIPAM) solutions in water or an 80:20 v/v water/methanol mixture are investigated in the one-phase region in dependence on pressure and temperature using dynamic light scattering. Throughout, two dynamic modes are observed, the fast one corresponding to the relaxation of the chain segments within the polymer blobs and the slow one to the relaxation of the blobs. A pressure scan in the one-phase region on an aqueous solution at 34.0 °C, i.e., slightly below the maximum of the coexistence line, reveals that the dynamic correlation length of the fast mode increases when the left and the right branch of the coexistence line are approached. Thus, the chains are rather swollen far away from the coexistence line, but contracted near the phase transition. Temperature scans of solutions in neat H2O or in H2O/CD3OD at 0.1, 130, and 200 MPa reveal that the dynamic correlation length of the fast mode shows critical behavior. However, the critical exponents are significantly larger than the value predicted by mean-field theory for the static correlation length, ν = 0.5, and the exponent is significantly larger for the solution in the H2O/CD3OD mixture than in neat H2O.

Cononsolvency of thermoresponsive polymers: where we are now and where we are going

Cononsolvency is an intriguing phenomenon where a polymer collapses in a mixture of good solvents. This cosolvent-induced modulation of the polymer solubility has been observed in solutions of several polymers and biomacromolecules, and finds application in areas such as hydrogel actuators, drug delivery, compound detection and catalysis. In the past decade, there has been a renewed interest in understanding the molecular mechanisms which drive cononsolvency with a predominant emphasis on its connection to the preferential adsorption of the cosolvent. Significant efforts have also been made to understand cononsolvency in complex systems such as micelles, block copolymers and thin films. In this review, we will discuss some of the recent developments from the experimental, simulation and theoretical fronts, and provide an outlook on the problems and challenges which are yet to be addressed.

Polymer Nanospheres with Hydrophobic Surface Groups as Supramolecular Building Blocks Produced by Aqueous PISA

A robust and straightforward synthesis of waterborne polymer nanospheres bearing the supramolecular association unit dialkoxynapthalene at their surface is presented using polymerization-induced self-assembly (PISA). A RAFT agent bearing this unit is first employed to produce poly(acrylic acid) chains, which are then chain-extended with styrene (S) to spontaneously form the nano-objects via RAFT aqueous emulsion polymerization. The particular challenge posed by the dialkoxynapthalene hydrophobicity can be overcome by the use of PISA and the deprotonation of the poly(acrylic acid). At pH = 7, very homogeneous latexes are obtained. The particle diameters can be tuned from 36 to 105 nm (with a narrow particle size distribution) by varying the molar mass of the PS block. The surface accessibility of the dialkoxynapthalene moieties is demonstrated by complexation with the complementary host cyclobis(paraquat-p-phenylene) (CBPQT⁴⁺ · Cl^- ), highlighting the potential of the nanospheres to act as building blocks for responsive supramolecular structures.

Thermoreversible Surface Polymer Patches: A Cryogenic Transmission Electron Microscopy Investigation

Hybrid core-shell type nanoparticles from gold nanoparticle cores and poly( N-isopropylacrylamide) shells were investigated with regard to their structural plasticity. Reversible addition-fragmentation chain transfer polymerization was used to synthesize well-defined polymers that can be readily anchored onto the gold nanoparticle surface. The polymer shell morphologies were directly visualized in their native solution state at high resolution by cryogenic transmission electron microscopy, and the microscopic results were further corroborated by dynamic light scattering. Different environmental conditions and brush architectures are covered by our experiments, which leads to distinct thermally induced responses. These responses include constrained dewetting of the nanoparticle surface at temperatures above the lower critical solution temperature of poly( N-isopropylacrylamide), leading to surface polymer patches. This effect provides a novel approach toward breaking the symmetry of nanoparticle interactions, and we show first evidence for its impact on the formation of colloidal superstructures.

Silica-Coated Magnetite Nanoparticles Carrying a High-Density Polymer Brush Shell of Hydrophilic Polymer

Integrating the properties of magnetite nanoparticles (MNPs) and high-density polymer brushes in one structure requires sophisticated synthetic designs and effective chemical approaches. A simple and versatile strategy for the fabrication of hydrophilic-polymer-capped magnetite-core-silica-shell nanohybrids with well-defined structure employing reverse microemulsion technique and reversible addition-fragmentation chain transfer (RAFT) polymerization is presented. The high-density polymer brush allows precise patterning of the magnetic nanohybrids with a tunable interparticle distance ranging from 20 nm to 80 nm by controlling the polymer size. The high structural precision provides a near stand-alone state of the MNPs in the nanohybrids with effectively inhibited magnetic interaction, as shown by superconducting quantum interference device (SQUID) measurements.

Hydrogel Nanoparticles with Thermally Controlled Drug Release

Improving the therapeutic efficacy and reducing systemic side effects of drugs is an important aspect in chemotherapy. The strategy presented here is the use of cisplatin loaded, temperature-sensitive, hydrogel nanoparticles (CisPt-NPs) and their ability to deliver and release chemodrugs selectively, based on thermal stimuli. The specially synthesized CisPt-NPs show a temperature-dependent increase of cisplatin release, at neutral pH (as in blood and normal tissue), in both the presence and absence of common metallic ions, as well as at the low pH found in lysosomes, where endocytosed NPs often localize. These CisPt-NPs were uptaken by breast cancer MDA-MB-435 cells, via endocytosis, and then mostly localized in the lysosomes. The in vitro cytotoxicity tests show that these CisPt-NPs have a significantly better efficacy at the slightly elevated temperatures. Potential applications are discussed.