Well-Defined Poly(γ-benzyl-l-glutamate)-g-Polytetrahydrofuran: Synthesis, Characterization, and Properties

Using Redox-Switchable Polymerization Catalysis to Synthesize a Chemically Recyclable Thermoplastic Elastomer

In an effort to synthesize chemically recyclable thermoplastic elastomers, a redox-switchable catalytic system was developed to synthesize triblock copolymers containing stiff poly(lactic acid) (PLA) end blocks and a flexible poly(tetrahydrofuran-co-cyclohexene oxide) (poly(THF-co-CHO) copolymer as the mid-block. The orthogonal reactivity induced by changing the oxidation state of the iron-based catalyst enabled the synthesis of the triblock copolymers in a single reaction flask from a mixture of monomers. The triblock copolymers demonstrated improved flexibility compared to poly(l-lactic acid) (PLLA) and thermomechanical properties that resemble thermoplastic elastomers, including a rubbery plateau in the range of -60 to 40 °C. The triblock copolymers containing a higher percentage of THF versus CHO were more flexible, and a blend of triblock copolymers containing PLLA and poly(d-lactic acid) (PDLA) end-blocks resulted in a stereocomplex that further increased polymer flexibility. Besides the low cost of lactide and THF, the sustainability of this new class of triblock copolymers was also supported by their depolymerization, which was achieved by exposing the copolymers sequentially to FeCl3 and ZnCl2 /PEG under reactive distillation conditions.

Injectable PTHF-based thermogelling polyurethane implants for long-term intraocular application

BACKGROUND

Hydrogels show great potential to be used for intraocular applications due to their high-water content and similarity to the native vitreous. Injectable thermosensitive hydrogels through a small-bore needle can be used as a delivery system for drugs or a tamponading substitute to treat posterior eye diseases with clear clinical potential. However, none of the currently available thermosensitive hydrogels can provide intraocular support for up to 3 months or more.

METHOD

In this study, an injectable polytetrahydrofuran (PTHF)-based thermosensitive hydrogel was synthesized by polyurethane reaction. We examined the injectability, rheological properties, microstructure, cytotoxicity, and in vivo compatibility and stability of the hydrogels in rabbit eyes.

RESULTS

We found that the PTHF block type and PTHF component ratio could modulate thermogelation properties of the polyurethane polymers. The PTHF-based hydrogel implants retained normal retinal structure and function. Incorporating bioinert PTHF generated highly biocompatible and more stable thermogels in the vitreous cavity, with gel networks and the presence of polymer still observed after 3 months when other thermogels would have been completely cleared. Moreover, despite lacking hydrolytically cleavable linkages, the polymers could be most naturally removed from the native vitreous by bio-erosion without additional surgical interventions.

CONCLUSION

Our findings suggest the potential of incorporating hydrophobic bioinert blocks to enhance the in vivo stability of supramolecularly associated hydrogels for long-term intraocular applications.

Self-assembled PEGylated amphiphilic polypeptides for gene transfection

In the present study, three biodegradable block copolymers composed of a poly(ethylene glycol) block and a copolypeptide block with varying compositions of cationic L-lysine (L-Lys) and hydrophobic benzyl-L-glutamate (Bzl-L-Glu) were designed for gene delivery applications. The polypeptides were synthesized by ring opening polymerization (ROP) and after orthogonal deprotection of Boc-L-Lys side chains, the polymer exhibited an amphiphilic character. To bind or encapsulate plasmid DNA (pDNA), different formulations were investigated: a nanoprecipitation and an emulsion technique using various organic solvents as well as an aqueous pH-controlled formulation method. The complex and nanoparticle (NP) formations were monitored by dynamic light scattering (DLS), and pDNA interaction was shown by gel electrophoresis and subsequent controlled release with heparin. The polypeptides were further tested for their cytotoxicity as well as biodegradability. The complexes and NPs presenting the most promising size distributions and pDNA binding ability were subsequently evaluated for their transfection efficiency in HEK293T cells. The highest transfection efficiencies were obtained with an aqueous formulation of the polypeptide containing the highest L-Lys content and lowest proportion of hydrophobic, helical structures (P1*), which is therefore a promising candidate for efficient gene delivery by biodegradable gene delivery vectors.

Hemocompatible, biocompatible and antifouling Acylated dextran-g-polytetrahydrofuran graft copolymer with silver nanoparticles: Synthesis, characterization and properties

The novel amphiphilic acylated dextran-g-polytetrahydrofuran (AcyDex-g-PTHF) graft copolymers have been successfully synthesized via combination of living cationic ring-opening polymerization of tetrahydrofuran (THF) to prepare living PTHF chains with different molecular weights (M_{n, PTHF}) of 800-2800 g/mol with nucleophile substitution to mediate grafting numbers (G_N) of 4-25 per 1000 Dex monosaccharide. The microphase separation in the graft copolymer exists for the incompatibility of hard dextran backbone and soft PTHF branches and the confined crystallization of backbone. This copolymer behaves excellent hemocompatibility with red blood cells, good biocompatibility with HeLa cells and strong resistance to bovine serum albumin adsorption. The microspheres (~1 μm) of graft copolymers loaded with drug ibuprofen exhibit pH sensitive controlled drug release behavior. Moreover, the AcyDex-g-PTHF/Ag nanocomposites show good antibacterial property against E. coli and S. aureus. This novel hemocompatible, biocompatible and antifouling AcyDex-g-PTHF graft copolymer will have potential application in biological and medical fields.

Vesicular assemblies of thermoresponsive amphiphilic polypeptide copolymers for guest encapsulation and release

Thermoresponsive amphiphilic polypeptide copolymers are synthesized via different polymerization techniques for their self-assembly into vesicular aggregates for guest encapsulation and release.

Lithium hexamethyldisilazide initiated superfast ring opening polymerization of alpha-amino acid N-carboxyanhydrides

Polypeptides have broad applications and can be prepared via ring-opening polymerization of α-amino acid N-carboxyanhydrides (NCAs). Conventional initiators, such as primary amines, give slow NCA polymerization, which requires multiple days to reach completion and can result in substantial side reactions, especially for very reactive NCAs. Moreover, current NCA polymerizations are very sensitive to moisture and must typically be conducted in a glove box. Here we show that lithium hexamethyldisilazide (LiHMDS) initiates an extremely rapid NCA polymerization process that is completed within minutes or hours and can be conducted in an open vessel. Polypeptides with variable chain length (DP = 20–1294) and narrow molecular weight distribution (Mw/Mn = 1.08–1.28) were readily prepared with this approach. Mechanistic studies support an anionic ring opening polymerization mechanism. This living NCA polymerization method allowed rapid synthesis of polypeptide libraries for high-throughput functional screening.

Ring-opening polymerizations of α-amino acid N-carboxyanhydrides to form polypeptides are usually sensitive to moisture, slow and can undergo side reactions. Here the authors use lithium hexamethyldisilazide to initiate α-amino acid N-carboxyanhydride polymerizations that is very fast and can be conducted in an open vessel.

Facile Preparation of Highly Stretchable and Recovery Peptide-Polyurethane/Ureas

In this work, a new class of highly stretchable peptide-polyurethane/ureas (PUUs) were synthesized containing short β-sheet forming peptide blocks of poly(γ-benzyl-l-glutamate)-b-poly(propylene glycol)-b-poly(γ-benzyl-l-glutamate) (PBLG-b-PPG-b-PBLG), isophorone diisocyanate as the hard segment, and polytetramethylene ether glycol as the soft phase. PBLG-b-PPG-b-PBLG with short peptide segment length (<10 residues) was synthesized by amine-initiated ring opening polymerization of γ-benzyl-l-glutamate-N-carboxyanhydrides (BLG-NCA), which shows mixed α-helix and β-sheet conformation, where the percent of β-sheet structure was above 48%. Morphological studies indicate that the obtained PUUs show β-sheet crystal and nanofibrous structure. Mechanical tests reveal the PUUs display medium tensile strength (0.25⁻4.6 MPa), high stretchability (>1600%), human-tissue-compatible Young's modulus (226⁻513 KPa). Furthermore, the shape recovery ratio could reach above 85% during successive cycles at high strain (500%). In this study, we report a facile synthetic method to obtain highly stretchable and recovery peptide-polyurethane/urea materials, which will have various potential applications such as wearable and implantable electronics, and biomedical devices.