Interconnected Macroporous Polymers Synthesized from Silica Particle Stabilized High Internal Phase Emulsions

Dual-functionalized Pickering HIPE templated poly(ɛ-caprolactone) scaffold for maxillofacial implants

High internal phase emulsion (HIPE) templated poly (ɛ-caprolactone) (PCL) scaffolds have gained widespread attention for large-sized bone defects due to its tuneable 3D architecture and ease of fabricating crosslinked PCL (cPCL) scaffolds. However, extremely high stabilizer (surfactant or nanoparticle) concentration and negligence of microenvironment for regeneration sites like alveolar bones have restrained industrial acceptance of these scaffolds. Herein, we demonstrated the fabrication of nanocomposite cPCL scaffolds within Pickering HIPE templates stabilized using modified silica nanoparticles (mSiNP) concentrations as low as 0.1 to 1.0 wt%. Using an unconventional approach, the mSiNP Pickering stabilizer was added in dispersed phase, contradicting Bancroft's rule. The colloidal stability was attained due to faster drifting of mSiNP towards the interface when it was dispersed in silicone oil. Scaffolds with tuneable properties were fabricated by controlling the mSiNP concentration and ϕ_d. Further, cPCL scaffolds were functionalized using clove oil (CO) to improve their efficiency in eradicating S. aureus and E. coli by disrupting their cellular integrity. Additionally, formation of biofilm on the surface of the scaffolds was successfully inhibited by the incorporation of CO. CO-functionalized scaffolds demonstrated excellent cytocompatibility towards MG-63 cells allowing their successful adhesion and proliferation on the surface of the scaffolds.

Cellulose-based, flexible polyurethane polyHIPEs with quasi-closed-cell structures and high stability for thermal insulation

Cellulose-based, closed-cell porous materials templated from emulsions are promising for thermal insulation, but their low stability imposed by physical interaction hinders the materials from real applications. Herein, we report the fabrication of cellulose-based, flexible polyurethane polyHIPEs with quasi-closed-cell structures, high stability and flexibility for thermal insulation. The polyHIPEs were prepared from cellulose-stabilized Pickering high internal phase emulsions through interfacial crosslinking using isocyanate. The resulting polyurethane polyHIPEs showed controllable external shapes, quasi-closed-cell structures, high flexibility, low density, and robust compression (without fracture even after compression to 30 % original height). The crosslinking enabled the polyHIPEs to show hydrophobicity, good stability (without breakage and dissolution observed after immersing in NaOH solution at pH 12, HCl solution at pH 1 and hot water at 100 °C, for 24 h) and decreased moisture uptake (below 1 %). The low density and quasi-closed-cell structures endowed the polyHIPEs with high thermal insulation, with thermal conductivity as low as 33.1 mW/(m K). These features make the cellulose-based, closed-cell polyHIPEs as an excellent candidate for thermal insulting.

Electrically conductive porous MXene-polymer composites with ultralow percolation threshold via Pickering high internal phase emulsion templating strategy

HYPOTHESIS

Constructing a segregated network in electrically conductive polymer composites (ECPCs) is an effective method to lower the electrical percolation threshold. The segregated network structure can be formed naturally via polymerizing Pickering high internal phase emulsions (HIPEs) because solid particles are assembled at water-oil interfaces. However, most Pickering stabilizers show poor electrical conductivity. In this work, we propose a facile method to prepare lightweight ECPCs with well-controlled segregated structure via Ti₃C₂T_x-stabilized HIPE templating.

EXPERIMENTS

Hydrophilic Ti₃C₂T_x flakes are delicately hydrophobized with a double-chain cation surfactant. The morphology of Ti₃C₂T_x flakes is investigated by transmission electron microscopy (TEM) and atom force microscopy (AFM). The surface properties of modified Ti₃C₂T_x are characterized by zeta potential and water contact angle tests. The stability of Ti₃C₂T_x-stabilized emulsions, and the structure of prepared ECPCs are systematically investigated.

FINDINGS

Surface modified Ti₃C₂T_x flakes are used to stabilize water-in-oil (w/o) HIPEs for the first time. After the polymerization of continuous oil phase, ECPCs are successfully prepared with closed-cell porous structure. The pore size and size distribution of porous composites can be tailored by varying the content of Ti₃C₂T_x flakes. The Ti₃C₂T_x flakes are mainly immobilized at the water-oil interface and eventually form the segregated network in composites. Combining the unique segregated network and the outstanding metallic conductivity of Ti₃C₂T_x, the prepared porous polymer composites exhibit good conductivity even with ultralow Ti₃C₂T_x content of 0.016 vol%.

Microphase-separated, magnetic macroporous polymers with amphiphilic swelling from emulsion templating

PolyHIPEs are promising for various applications associated with liquid uptakes. PolyHIPEs from a reactive, monomeric block copolymer can exhibit amphiphilic swelling, but such swelling usually tends to disappear upon copolymerization...

Recent advances in separation applications of polymerized high internal phase emulsions

Polymerized high internal phase emulsions as highly porous adsorption materials have received increasing attention and wide applications in separation science in recent years due to their remarkable merits such as highly interconnected porosity, high permeability, good thermal and chemical stability, and tailorable chemistry. In this review, we attempt to introduce some strategies to utilize polymerized high internal phase emulsions for separation science, and highlight the recent advances made in the applications of polymerized high internal phase emulsions for diverse separation of small organic molecules, carbon dioxide, metal ions, proteins, and other interesting targets. Potential challenges and future perspectives for polymerized high internal phase emulsion research in the field of separation science are also speculated at the end of this review.

Ultralight Aerogels with Hierarchical Porous Structures Prepared from Cellulose Nanocrystal Stabilized Pickering High Internal Phase Emulsions

Cellulose nanocrystal (CNC)-based aerogels with extremely low density and hierarchical porous structure were constructed via a facile Pickering-emulsion-templated strategy. In this method, aminated CNCs (CNC-NH₂) were synthesized to stabilize o/w Pickering high internal phase emulsions (Pickering HIPEs). Amino groups were introduced to CNCs to decrease the net surface charges of CNCs, enhance their aggregation, and therefore achieve Pickering HIPEs stabilized by the particles of ultralow content (∼0.1 wt %). A series of CNC aerogels was then obtained by freeze drying these emulsions. The resulting aerogels were ultralight with a density that reached ca. 0.5 mg/cm³ (an order of magnitude lower than that previously reported for CNC aerogels) and an ultrahigh porosity (up to 99.969%). Contributed to the extremely low density, the thermal conductivity of the aerogels was around 0.021 W/(m·K) which is lower than that of air (0.024 W/(m·K)). This novel strategy could be applied to other materials, such as graphene and carbon nanotubes, to prepare ultralight aerogels with controllable porous structures and unique properties.

Preparation of Carboxymethyl Cellulose-Based Macroporous Adsorbent by Eco-Friendly Pickering-MIPEs Template for Fast Removal of Pb2+ and Cd2

Recently, Pickering high internal phase emulsions (Pickering HIPEs) have been widely used to fabricate macroporous materials. However, the high usage of poisonous organic solvent in HIPEs not only greatly increases the cost but also is harmful to human health and environment, which leads to limited large-scale applications. In this study, we prepared a novel monolithic macroporous material of carboxymethyl cellulose-g-poly(acrylamide)/montmorillonite (CMC-g-PAM/MMT) by the free radical polymerization via oil-in-water Pickering medium internal phase emulsions (Pickering MIPEs), which used the non-toxic and eco-friendly flaxseed oil as continuous phase, MMT, and Tween-20 (T-20) as stabilizer. The pore structure of the resulting macroporous materials could be tuned easily by adjusting the content of MMT, co-surfactant T-20, and the oil phase volume fraction. The maximal adsorption capacities of the prepared macroporous material for Pb²⁺ and Cd²⁺ were 456.05 and 278.11 mg/g, respectively, and the adsorption equilibrium can be reached within 30 min. Otherwise, the macroporous monolith exhibited excellent reusability through five adsorption–desorption cycles. Thus, the eco-friendly Pickering-MIPEs is a potential alternative method to be used to fabricate multi-porous adsorption materials for environmental applications.

Production of High Internal Phase Emulsion with a Miniature Twin Screw Extruder

Emulsions are traditionally prepared by batched emulsifying an oil phase and aqueous phase with a magnetic/mechanical stirrer, homogenizer, or ultrasonic machine, etc. Herein, high internal phase emulsions (HIPEs) produced with a miniature twin screw extruder were first investigated. Adding an oil phase (the mixture of styrene, divinylbenzene, and span 80) and aqueous phase to the inlet of a miniature twin screw extruder, a series of white and viscous HIPEs were obtained at the outlet of the extruder. With the screw rotation speed and the surfactant content varied respectively in the ranges of 50-200 rpm and 5-20%, a series of HIPEs having uniform droplet size were produced. Polymerizing these HIPEs caused a series of polymerized HIPES, which have a well-defined open-cell structure. The method developed herein shows that it is possible to prepare emulsions with oil and water by twin screw extrusion. Also, it may also cause a continuous preparation of HIPEs when the miniature twin screw extruder was replaced by an industrial extruder.

Pickering emulsion-templated polymers: insights into the relationship between surfactant and interconnecting pores

Pickering high internal phase emulsions (HIPEs) using micron-size polymeric particles as stabilizer were developed. By adding a small amount of surfactant to the Pickering HIPEs, macroporous polymers with a well-define open-cell structure were synthesized with these HIPEs as templates. Owing to the micron-size of the particles, the particle locations could be observed directly by laser scanning confocal microscopy. It was found that the excess and attached particles aggregated and formed thick particle layers around the droplets when the HIPE was stabilized solely by particles. These thick particle layers were extremely stable, and did not easily rupture during or after polymerization, which caused the resulting polymers to have a closed-cell structure. When a small amount of surfactant was added, it was found that the surfactant disaggregated the particles, leaving them well-dispersed in the continuous phase. Moreover, the surfactant tended to occupy the oil–water interface at the contact point of adjacent droplets, where the interconnecting pores were hence likely to be formed after consolidation of the continuous phase. This observation confirmed experimentally the mechanism of interconnecting pore formation in Pickering-HIPE-templated porous polymers proposed theoretically in previous works.

Pickering high internal phase emulsions (HIPEs) stabilized by micron-size polymer particles were developed, and the relationship between surfactant and interconnecting pores of these HIPE-templated porous polymers was experimentally clarified.

A facile fabrication of porous fluoro-polymer with excellent mechanical properties based on high internal phase emulsion templating using PLA as co-stabilizer

The stability of fluoro-high internal phase emulsion (fluoro-HIPE) systems and fluoro-polyHIPEs’ mechanical strength require further improvement to meet the requirements of future applications. In this study, we used polylactic acid (PLA) as a co-stabilizer to improve the stability of the fluoro-polyHIPE. The effects of concentration and molecular weight of PLA on the pores of the fluoro-polyHIPEs were investigated. The addition of PLA produced a porous material with narrower void size distributions, higher specific surface areas and enhanced mechanical properties compared to the fluoro-polyHIPE material without the additive. The resulting fluoro-polyHIPE showed smaller pore sizes (void diameters ranged from 1–3 μm) and an improved hydrophobic nature (contact angle can reach to 148.6°). The crush strength and Young's modulus values can reach 4.42 and 74.07 MPa, respectively, at a PLA addition of 25 wt% (oil phase composition), representing increases of 246% and 650% over fluoro-polyHIPE without PLA addition. The fluoro-poly-HIPE demonstrated excellent mechanical properties compared to many engineering foams, such as melamine, polystyrene, and even graphite foams. Improvements in the performance of porous fluoropolymer materials will be beneficial for many applications, such as chemical adsorption and separation, etc.

Effect of PLA on the stability of fluorinated-HIPE and size tuning of the resultant fluoro-polyHIPE with enhanced mechanical properties.

Ultralight Silica Foams with a Hierarchical Pore Structure via a Surfactant-Free High Internal Phase Emulsion Process

An ultralight silica aerogel is among the most versatile materials available for technical applications; however, it remains a huge challenge to reduce its manufacturing cost. Here, we report on a simple approach for the preparation of silica foam monoliths with ultrahigh porosity up to 99.5% and specific surface area as high as 755 m² g^-1, which are similar to those of an aerogel. Our strategy is based on the effective stabilization of water-in-oil high internal phase emulsions by a hydrophobic silica precursor polymer, hyperbranched polyethoxysiloxane because of its hydrolysis-induced amphiphilicity. After conversion of this precursor polymer to silica, the emulsions are solidified without significant volume shrinkage. Thus, mechanically strong macroporous silica monoliths are obtained after removal of its liquid components. According to nitrogen sorption data, the resulting silica foams exhibit a high specific surface area and a foam skeleton consisting of both micropores (<2 nm) and mesopores (2-50 nm). The pore size, porosity, and surface area can be regulated by varying pH as well as the concentration of the silica precursor in the oil phase. In addition, the pore size can be adjusted by controlling shear force during emulsification. This work opens a new avenue for producing ultralight porous materials amenable to numerous applications.

Synthesis of Emulsion-Templated Magnetic Porous Hydrogel Beads and Their Application for Catalyst of Fenton Reaction

The pristine Fe₃O₄ nanoparticle (FeNP) is supposed to be a good catalyst of Fenton processes which have shown significant potential for water purification. Herein the magnetic macroporous hydrogel beads, having an open-cell structure, were synthesized by sedimentation polymerization of pristine FeNP stabilized oil-in-water high internal phase emulsions. The effects of the FeNP amount, internal phase fraction, and the costabilizer Tween85 concentration on the structure, such as interconnecting degree, void size, and its distribution of both the surface and inner of the beads, were investigated. With a methyl orange (MO) aqueous solution passing through a chromatography column that was filled with the FeNPs loaded hydrogel beads, the efficiency of these hydrogel beads as catalyst for Fenton reaction to decompose MO in water was tested. The MO was decomposed quickly at the first hour, followed by decomposed gradually in a further 5 h, and the decomposition rate of MO could be up to 99.6% at the end of the test. Moreover, MO decomposition rate remained over 98.2% in six batches which were run in the same beads filled column. The results showed that these FeNPs loaded porous hydrogel beads were reusable and highly efficient supporter for catalysis of Fenton reaction for decomposing organic pollutants in water.

One-step Preparation of Monodisperse Multifunctional Macroporous Particles through a Spontaneous Physical Process

Macroporous particles that combine the property features of spherical structures and porous materials are expected to find use over micro- and macroscopic length scales from miniaturized systems such as cell imaging, drug and gene delivery to industrial applications. However, the capacity for de novo design of such materials is still limited. Here, a spontaneous process to fabricate monodisperse multifunctional macroporous particles (MMMPs) by high internal phase emulsion templating is reported. An interesting physical phenomenon involving self-emulsification and synergistic effects between nanoparticles and amphiphilic diblock copolymers is observed in this process. These MMMPs, featured with tailor-made pore structures, pH responsiveness, and magnetic response, could be used as stimuli-responsive carriers for multiple functional molecules with a high loading and releasing efficiency. This new understanding regarding the underlying phenomena that control self-emulsification behavior and synergistic action in emulsion systems provides a unique outlook and a novel approach to the design of potentially multifunctional porous materials for controllable release and delivery processes.

Macroporous polymers prepared via frozen UV polymerization of the emulsion-templates stabilized by a low amount of surfactant

Macroporous polymers based on high internal phase emulsions (HIPEs) possess tunable porous structures and device shapes, and these characteristics make it possible for it to be applied in many fields. However, such materials also demonstrate undesirable properties, such as their brittleness and chalkiness, due to a great amount of surfactant required (5.0–50.0%, relative to the external phase) to realize the transformation from HIPEs to macroporous polymers (polyHIPEs). Herein, O/W HIPEs stabilized by a small amount (as low as 0.1 wt%, relative to the external phase) of commercial surfactant were prepared by magnetic stirring and subsequently homogenizing, and well-defined polyHIPEs were obtained through frozen UV polymerization of these HIPEs. In this process, the prepared HIPE was squeezed out by an injector and frozen at once, which effectively prevented the coalescence of internal phase. Then a 365 nm UV light was utilized to initiate the polymerization and the temperature was kept at −20 °C in order to avoid the melting of the frozen HIPE. After the polymerization, samples, having a typical polyHIPE structure, were obtained. Besides, the original monomer, surfactant and the oil (internal phase) were respectively replaced, and well-defined polyHIPEs could still be obtained. All the results suggested that frozen UV polymerization of HIPEs was an effective and universal approach to produce polyHIPEs with a low amount of surfactant.

PolyHIPE is prepared via frozen UV polymerization of the HIPE stabilized by a tiny amount (e.g. 0.1 wt%) of surfactant.

Production of Concentrated Pickering Emulsions with Narrow Size Distributions Using Stirred Cell Membrane Emulsification

Stirred cell membrane emulsification (SCME) has been employed to prepare concentrated Pickering oil in water emulsions solely stabilized by fumed silica nanoparticles. The optimal conditions under which highly stable and low-polydispersity concentrated emulsions using the SCME approach are highlighted. Optimization of the oil flux rates and the paddle stirrer speeds are critical to achieving control over the droplet size and size distribution. Investigating the influence of oil volume fraction highlights the criticality of the initial particle loading in the continuous phase on the final droplet size and polydispersity. At a particle loading of 4 wt %, both the droplet size and polydispersity increase with increasing of the oil volume fraction above 50%. As more interfacial area is produced, the number of particles available in the continuous phase diminishes, and coincidently a reduction in the kinetics of particle adsorption to the interface resulting in larger polydisperse droplets occurs. Increasing the particle loading to 10 wt % leads to significant improvements in both size and polydispersity with oil volume fractions as high as 70% produced with coefficient of variation values as low as ∼30% compared to ∼75% using conventional homogenization techniques.

Fabrication of CMC-g-PAM Superporous Polymer Monoliths via Eco-Friendly Pickering-MIPEs for Superior Adsorption of Methyl Violet and Methylene Blue

A series of superporous carboxymethylcellulose-graft-poly(acrylamide)/palygorskite (CMC-g-PAM/Pal) polymer monoliths presenting interconnected pore structure and excellent adsorption properties were prepared by one-step free-radical grafting polymerization reaction of CMC and acrylamide (AM) in the oil-in-water (O/W) Pickering-medium internal phase emulsions (Pickering-MIPEs) composed of non-toxic edible oil as a dispersion phase and natural Pal nanorods as stabilizers. The effects of Pal dosage, AM dosage, and co-surfactant Tween-20 (T-20) on the pore structures of the monoliths were studied. It was revealed that the well-defined pores were formed when the dosages of Pal and T-20 are 9–14 and 3%, respectively. The porous monolith can rapidly adsorb 1,585 mg/g of methyl violet (MV) and 1,625 mg/g of methylene blue (MB). After the monolith was regenerated by adsorption-desorption process for five times, the adsorption capacities still reached 92.1% (for MV) and 93.5% (for MB) of the initial maximum adsorption capacities. The adsorption process was fitted with Langmuir adsorption isotherm model and pseudo-second-order adsorption kinetic model very well, which indicate that mono-layer chemical adsorption mainly contribute to the high-capacity adsorption for dyes. The superporous polymer monolith prepared from eco-friendly Pickering-MIPEs shows good adsorption capacity and fast adsorption rate, which is potential adsorbent for the decontamination of dye-containing wastewater.

Pore Structure of Macroporous Polymers Using Polystyrene/Silica Composite Particles as Pickering Stabilizers

A novel approach for the preparation of interconnected macroporous polymers with a controllable pore structure was reported. The method was based on the polymerization of water-in-oil Pickering high internal phase emulsion (HIPE) stabilized by polystyrene (PS)/silica composite particles. The composite Pickering stabilizers were facilely obtained by mixing positively charged PS microspheres and negatively charged silica nanoparticles, and their amphiphilicity could be delicately tailored by varying the ratio of PS and silica. The droplet size of Pickering HIPEs was characterized using an optical microscope. The pore structure of polymer foams was observed using a scanning electron microscope. The interconnectivity of macroporous polymers was evaluated upon their gas permeability, which was greatly improved after etching PS microspheres included in the Pickering stabilizers with tetrahydrofuran. As a result, fine tailoring of the pore structure of polymer foams could be realized by simply tuning the ratio of PS to silica particles in the composite stabilizer.

Synthesis and characterization of polyHIPE composites containing halloysite nanotubes

High internal phase emulsion templated-polymer (polyHIPE) composites were prepared from spirulina modified halloysite (HL) nanotube containing styrene/divinylbenzene based water-in-oil type concentrated emulsions. In order to obtain a stable emulsion for neat polyHIPE’s synthesis, at least 5 vol% Span-80 as a non-ionic surfactant, with respect to organic phase was needed. For syntheses of polyHIPE composite structures, this amount was decreased to 2 vol%, even in presence of 0.25 wt% modified nanotube with respect to the organic phase. All the polyHIPE composites exhibited open pore structures with pore interconnections together with partially or completely closed pores. The composite having 0.25 wt% modified nanotube and 2 vol% surfactant was found to have about 260% higher dye adsorption capacity and the highest onset degradation temperature in comparison with neat polyHIPE.

Macroporous Polymers with Aligned Microporous Walls from Pickering High Internal Phase Emulsions

A novel class of macroporous polymers, open macroporous polymers with aligned microporous void walls, were prepared by combining particle-stabilized high internal phase emulsion (Pickering HIPE) and unidirectional freezing technique. These Pickering HIPEs were prepared by utilizing poly(urethane urea)/(vinyl ester resin) nanoparticles as the sole stabilizer, and this nanoparticles also acted as building blocks for the resulting macroporous polymers. Moreover, the morphology and compression modulus of the resulting porous materials could be tuned easily. This means now Pickering-HIPE templated open-cell foams can be prepared, and this route was normally achieved with surfactant and/or chemical reaction involved.

High-internal-phase emulsions stabilized by metal-organic frameworks and derivation of ultralight metal-organic aerogels

To design high-internal-phase emulsion (HIPE) systems is of great interest from the viewpoints of both fundamental researches and practical applications. Here we demonstrate for the first time the utilization of metal-organic framework (MOF) for HIPE formation. By stirring the mixture of water, oil and MOF at room temperature, the HIPE stabilized by the assembly of MOF nanocrystals at oil-water interface could be formed. The MOF-stabilized HIPE provides a novel route to produce highly porous metal-organic aerogel (MOA) monolith. After removing the liquids from the MOF-stabilized HIPE, the ultralight MOA with density as low as 0.01 g·cm(-3) was obtained. The HIPE approach for MOA formation has unique advantages and is versatile in producing different kinds of ultralight MOAs with tunable porosities and structures.

Interconnectivity of Macroporous Hydrogels Prepared via Graphene Oxide-Stabilized Pickering High Internal Phase Emulsions

Interconnected macroporous poly(acrylic acid) (PAA) hydrogels are prepared via oil-in-water (o/w) Pickering high internal phase emulsion (HIPE) templates stabilized by graphene oxide (GO). The amphiphilicity of GO is adjusted by slight modification with cetyltrimethylammonium bromide (CTAB). The morphology of macroporous PAA is observed by a field-emission scanning electron microscope (FE-SEM). The gas permeability is characterized to evaluate the interconnectivity of polymer foams. The pore and pore throat size can be tailored by varying the wettability and concentration of GO. The selective adsorption toward dyes of PAA hydrogels is proved. Macroporous PAA hydrogels with an open-cell structure show enhanced adsorption behavior of both methylene blue (MB) and copper(II) ions.

Interconnected Porous Polymers with Tunable Pore Throat Size Prepared via Pickering High Internal Phase Emulsions

Interconnected macroporous polymers were prepared by copolymerizing methyl acrylate (MA) via Pickering high internal phase emulsion (HIPE) templates with modified silica particles. The pore structure of the obtained polymer foams was observed by field-emission scanning electron microscopy (FE-SEM). Gas permeability was characterized to evaluate the interconnectivity of macroporous polymers. The polymerization shrinkage of continuous phase tends to form open pores while the solid particles surrounding the droplets act as barriers to produce closed pores. These two conflicting factors are crucial in determining the interconnectivity of macroporous polymers. Thus, poly-Pickering HIPEs with high permeability and well-defined pore structure can be achieved by tuning the MA content, the internal phase fraction, and the content of modified silica particles.

Competitive adsorption of three phenolic compounds to hydrophilic urea-formaldehyde macroporous foams derived from lignin-based Pickering HIPEs template

Hydrophilic urea-formaldehyde macroporous foams (UFMF) were simply synthesized by templating oil-in-water Pickering high internal phase emulsions (HIPEs) solely stabilized by lignin particles.

Closed-cell and open-cell porous polymers from ionomer-stabilized high internal phase emulsions

We firstly present a strategy that enables fabrication of both closed-cell and open-cell porous polymers (polyHIPEs) from high internal phase emulsions (HIPEs) stabilized with an ionomer.

MoS2 armored polystyrene particles with a narrow size distribution via membrane-assisted Pickering emulsions for monolayer-shelled liquid marbles

Monolayer-shelled liquid marbles were successfully stabilized by MoS₂ armored polystyrene particles with a narrow size distribution via membrane-assisted Pickering emulsions.

Phase inversion of ionomer-stabilized emulsions to form high internal phase emulsions (HIPEs)

The phase inversion of ionomer-stabilized emulsions to form high internal phase emulsions can be induced by salt concentration and pH changes.