Evidence for Catalyst Association in the Catalyst Transfer Polymerization of Thieno[3,2-b]thiophene

Rethinking Catalyst Trapping in Ni-Catalyzed Thieno[3,2-b]thiophene Polymerization

Catalyst-transfer polymerization (CTP) is a chain-growth method used to synthesize conjugated polymers. Although CTP works well for most donor-type monomers, the polymerization stalls with thieno[3,2-b]thiophene when using Ni catalysts. Previous reports have rationalized this result by suggesting that the catalyst is trapped in a Ni0 π-complex with the highly electron-rich arene. In this study, evidence is provided that the catalyst trap is more likely a NiII complex that arises from oxidative insertion of Ni0 into the C-S bonds of thieno[3,2-b]thiophene. This result is consistent with the known reactivity of Ni0 complexes toward S-heteroarenes and is supported herein by 31P nuclear magnetic resonance spectra acquired in situ, as well as data collected from small-molecule model reactions and density-functional theory simulations of the polymerization. We propose that this C-S insertion pathway and related off-cycle reactions may be relevant to understanding or enabling the CTP of other monomers with fused thiophenes.

Using JPP to Identify Ni Bidentate Phosphine Complexes In Situ

Identifying intermediates of Ni-containing reactions can be challenging due to the high reactivity of Ni complexes and their sensitivity toward air and moisture. Many Ni bidentate phosphine complexes are diamagnetic and can be analyzed in situ via 31P NMR spectroscopy, but the oxidation state of Ni is difficult to determine using 31P chemical shift analysis alone. The J-coupling between P atoms, JPP, has been proposed to correlate with oxidation state, but few investigations have looked at how JPP is affected by parameters such as length of the linker or identity of the phosphine or other ligands. The present investigation into the JPP values of Ni bidentate phosphine complexes with two-carbon and three-carbon linkers shows that the JPP values observed in 31P NMR spectra, |JPP|, are competent indicators of the oxidation state at Ni. For complexes with two-carbon linkers, |JPP| > 40 Hz is typical of Ni0 while |JPP| < 30 Hz is typical of NiII; this trend is reversed for complexes with three-carbon linkers. Additionally, the Lewis acidity of the Ni and Lewis basicity of the phosphine ligand affect JPP predictably. For example, increased P-to-Ni donation arising from more-donating phosphines or more-withdrawing ligands trans to the P atoms causes a more negative JPP. These results should enable the oxidation state of Ni and properties of ligands in Ni bidentate phosphine complexes to be determined in situ during reactions containing these species.

Universal Suzuki-Miyaura Catalyst-Transfer Polymerization for Precision Synthesis of Strong Donor/Acceptor-Based Conjugated Polymers and Their Sequence Engineering

Catalyst-transfer polymerization has revolutionized the field of polymer synthesis due to its living character, but for a given catalyst system, the polymer scope is rather narrow. Herein we report a highly efficient Suzuki-Miyaura catalyst-transfer polymerization (SCTP) that covers a wide range of monomers from electron-rich (donor, D) to electron-deficient (acceptor, A) (hetero)arenes by rationally designing boronate monomers and using commercially available Buchwald RuPhos and SPhos Pd G3 precatalysts. Initially, we optimized the controlled polymerization of 3,4-propylenedioxythiophene (ProDOT), benzotriazole (BTz), quinoxaline (QX), and 2,3-diphenylquinoxaline (QXPh) by introducing new boronates, such as 4,4,8,8-tetramethyl-1,3,6,2-dioxazaborocane and its N-benzylated derivative, to modulate the reactivity and stability of the monomers. As a result, PProDOT, PBTz, PQX, and PQXPh were prepared with controlled molecular weight and narrow dispersity (Đ < 1.29) in excellent yield (>85%). A detailed investigation of the polymer structures using ¹H NMR and MALDI-TOF spectrometry supported the chain-growth mechanism and the high initiation efficiency of the SCTP method. In addition, the use of RuPhos-Pd showing excellent catalyst-transfer ability on both D/A monomers led to unprecedented controlled D-A statistical copolymerization, thereby modulating the HOMO energy level (from -5.11 to -4.80 eV) and band gap energy (from 1.68 to 1.91 eV) of the resulting copolymers. Moreover, to demonstrate the living nature of SCTP, various combinations of D-A and A-A block copolymers (PBTz-b-PProDOT, PQX-b-PProDOT, and PQX-b-PBTz) were successfully prepared by the sequential addition method. Finally, simple but powerful one-shot D-A block copolymerization was achieved by maximizing the rate difference between a fast-propagating pinacol boronate donor and a slow-propagating acceptor to afford well-defined poly(3-hexylthiophene)-b-poly(benzotriazole).

The Importance of Ligand-Induced Backdonation in the Stabilization of Square Planar d10 Nickel π-Complexes

The electronic nature of Ni π-complexes is underexplored even though these complexes have been widely postulated as intermediates in organometallic chemistry. Herein, the geometric and electronic structure of a series of nickel π-complexes, Ni(dtbpe)(X) (dtbpe=1,2-bis(di-tert-butyl)phosphinoethane; X=alkene or carbonyl containing π-ligands), is probed using a combination of ³¹ P NMR, Ni K-edge XAS, Ni K_β XES, and DFT calculations. These complexes are best described as square planar d¹⁰ complexes with π-backbonding acting as the dominant contributor to M-L bonding to the π-ligand. The degree of backbonding correlates with ² J_PP from NMR and the energy of the Ni 1s→4p_z pre-edge in the Ni K-edge XAS data, and is determined by the energy of the π*_ip ligand acceptor orbital. Thus, unactivated olefinic ligands tend to be poor π-acids whereas ketones, aldehydes, and esters allow for greater backbonding. However, backbonding is still significant even in cases in which metal contributions are minor. In such cases, backbonding is dominated by charge donation from the diphosphine, which allows for strong backdonation, although the metal centre retains a formal d¹⁰ electronic configuration. This ligand-induced backbonding can be formally described as a 3-centre-4-electron (3c-4e) interaction, in which the nickel centre mediates charge transfer from the phosphine σ-donors to the π*_ip ligand acceptor orbital. The implications of this bonding motif are described with respect to both structure and reactivity.

Unstoichiometric Suzuki–Miyaura cyclic polymerization of extensively conjugated monomers

Suzuki–Miyaura polycondensation of an excess of extensively conjugated aromatic dibromide with 1.0 equivalent of phenylenediboronate in the presence of ^tBu₃PPd(0) precatalyst afforded cyclic polymers.

Identifying the missing link in catalyst transfer polymerization

Nickel-catalyzed catalyst transfer polycondensation (CTP) of thiophenes is an efficient strategy for the controlled synthesis of polythiophenes. However, a detailed view of its reaction mechanism has remained elusive with unresolved questions regarding the geometry and bonding of critical Ni(0) thiophene intermediates. Herein, we provide experimental and computational evidence of structurally characterized square planar η2-Ni(0)-thiophene species and their relevance to the mechanism of CTP. These results confirm the viability of C,C-η2 bound intermediates in CTP of thiophenes, providing an electronic rationale for the stability of such species, and thus that such processes can proceed as living polymerizations. We further show that C,S-κ2 species may also be relevant in nickel-catalyzed CTP of thiophenes, providing new avenues for exploitation and optimization.

Impact of Preferential π-Binding in Catalyst-Transfer Polycondensation of Thiazole Derivatives

Polymerizing electron-deficient arenes in a controlled, chain-growth fashion remains a significant challenge despite a decade of research on catalyst-transfer polycondensation. The prevailing hypothesis is that the chain-growth mechanism stalls at a strongly associated metal-polymer π-complex, preventing catalyst turnover. To evaluate this hypothesis, we performed mechanistic studies using thiazole derivatives and identified approaches to improve their chain-growth polymerization. These studies revealed a surprisingly high barrier for chain-walking toward the reactive C-X bond. In addition, a competitive pathway involving chain-transfer to monomer was identified. This pathway is facilitated by ancillary ligand dissociation and N-coordination to the incoming monomer. We found that this chain-transfer pathway can be attenuated by using a rigid ancillary ligand, leading to an improved polymerization. Combined, these studies provide mechanistic insight into the challenges associated with electron-deficient monomers as well as ways to improve their living, chain-growth polymerization. Our mechanistic studies also revealed an unexpected radical anion-mediated oligomerization in the absence of catalyst, as well as a surprising oxidative addition into the thiazole C-S bond in a model system.

Intramolecular catalyst transfer polymerisation of conjugated monomers: from lessons learned to future challenges

Eleven years after the first reports on intramolecular catalyst transfer polycondensations, this review aims to critically recap on the fundamental “lessons” that can be learned from the historic literature as well as from the fervid activity that has emerged in the last three years.