Conelike Janus Composite Particles

Adsorption characteristics of Janus tadpole polymers

The shape of Janus particles is directly connected to their adsorption behavior. Janus tadpole polymers offer a unique topological architecture that includes competition between entropic, enthalpic, and topological terms in the adsorption free energy; accordingly, non-trivial adsorption behavior patterns are expected. We study the surface adsorption of Janus tadpole polymers by means of Monte Carlo simulations, finding that, depending on which part of the tadpole polymers is preferentially adsorbing on the surface, very different types of behavior for both the adsorbed polymeric phase and of the brush arise. The adsorbed phase and the brush mutually influence each other, leading to a variety of phenomena such as nematic ordering of the adsorbed stiff tadpole tails and intriguing changes in the territoriality of adsorbed ring polymers on the surface. We analyze in detail our findings, revealing the mechanisms behind the organization and ordering, and opening up new possibilities to tune and control the structure of such systems.

Interfacial Activity of Janus Particle: Unity of Molecular Surfactant and Homogeneous Particle

Janus particles with different compositions and properties segmented to different regions on the surface of one objector provide more opportunities for interfacial engineering. As a novel interfacial active material, Janus particles integrate the amphiphilic properties of molecular surfactants and the Pickering effect of homogeneous particles. In this research, the outstanding properties of Janus particles on various interfaces are examined from both theoretical and practical perspectives, and the advantages of Janus particles over molecular surfactants and homogeneous particle surfactants are analyzed. We believe that Janus particles are ideal tools for interface regulation and functionalization in the future.

Superhydrophobic Coating Derived from the Spontaneous Orientation of Janus Particles

A superhydrophobic surface was achieved using a monolayer of the perpendicularly oriented epoxy-silica@polydivinylbenzene (PDVB) Janus particles (JPs) on an epoxy resin substrate. The epoxy-silica@PDVB JPs were synthesized from the silica@PDVB/polystyrene (PS) JPs through selective etching of the PDVB/PS belly and the surface modification of the silica part. The modified silica parts can be covalently bonded with the epoxy resin to make the perpendicular orientation spontaneous as well as the coating more robust. The outward PDVB bellies can constitute the micro-/nanoscale hierarchical structures for the superhydrophobic property. The superhydrophobic coating exhibits water repellence and self-cleaning properties. Moreover, the coating exhibits good chemical durability that it can keep the superhydrophobic property after long-time immersion in various aqueous solutions and organic solvents. The coating is still superhydrophobic after water flushing and mechanical wearing, showing the perfect mechanical durability.

Probing the morphology evolution of chemically anisotropic colloids prepared by homopolymerization- and copolymerization-induced phase separation

Chemically anisotropic colloids prepared by polymerization-induced phase separation during seeded emulsion polymerization with non-crosslinked seeds reveals tunability in both surface and interior properties based on the morphology evolution.

Hybrid Janus Particles: Challenges and Opportunities for the Design of Active Functional Interfaces and Surfaces

Janus particles are a unique class of multifunctional patchy particles combining two dissimilar chemical or physical functionalities at their opposite sides. The asymmetry characteristic for Janus particles allows them to self-assemble into sophisticated structures and materials not attainable by their homogeneous counterparts. Significant breakthroughs have recently been made in the synthesis of Janus particles and the understanding of their assembly. Nevertheless, the advancement of their applications is still a challenging field. In this Review, we highlight recent developments in the use of Janus particles as building blocks for functional materials. We provide a brief introduction into the synthetic strategies for the fabrication of JPs and their properties and assembly, outlining the existing challenges. The focus of this Review is placed on the applications of Janus particles for active interfaces and surfaces. Active functional interfaces are created owing to the stabilization efficiency of Janus particles combined with their capability for interface structuring and functionalizing. Moreover, Janus particles can be employed as building blocks to fabricate active functional surfaces with controlled chemical and topographical heterogeneity. Ultimately, we will provide implications for the rational design of multifunctional materials based on Janus particles.

Investigating Switchable Nanostructures in Shape Memory Process for Amphipathic Janus Nanoparticles

Janus particles (JPs) have attracted increasing attention from the communities of materials science, chemistry, physics, and biology. However, the nanoscale JPs that can switch shapes in response to an environmental stimulus is a significant challenge. In this article, we have demonstrated a simple procedure to fabricate the amphipathic Janus nanoparticles (JNPs) composed of hydrophilic body and hydrophobic lobe via using sudden negative pressure technique. Moreover, in response to temperature, the nanoparticles can recover to their initial nanosphere state by a switchable process, showing promising shape memory effect. Here, we can monitor the switchable nanostructures with hydrophilic and hydrophobic changes in the shape memory process of the JNPs by transmission electron microscope, dynamic light scattering, and water contact angle. Furthermore, we successfully compare the differences in shape deformation ratio and shape recovery ratio using the three test methods by the statistical analysis of Student's t-test for independent samples. In addition, we also develop hybrid magnetic Janus nanoparticles, changed from the amphipathic JNPs by the selective attachment of magnetic nanoparticles with hydrophobic molecules, which show new Janus nanostructure and shape memory property.

Janus Colloids toward Interfacial Engineering

Janus colloids are functional particles consisting of two surfaces (or internal materials) with distinct physical or chemical properties in the same particle. Owing to their amphiphilic nature, Janus colloids composed of both hydrophilic and hydrophobic faces provide a powerful tool to generate functional surfaces and to manipulate the properties of interfaces. Amphiphilic Janus colloids have shown promising applications as particulate surfactants in oil/water separation, as interfacial compatibilizers in polymer blends, and as assembly blocks in robust coatings with unique wettability. In this Feature Article, we summarize recent advances in engineering interfaces by using Janus colloids.

Light-Responsive Janus-Particle-Based Coatings for Cell Capture and Release

A robust light-responsive coating based on Janus composite particles is achieved. First, strawberry-like silica Janus particles are synthesized by the sol-gel process at a patchy emulsion interface. One side of the silica Janus particles possesses nanoscale roughness, and the other side is flat. Then, spiropyran-containing polymer brushes are grafted onto the coarse hemispherical side of the as-synthesized Janus particles, and the other flat side is modified with imidazoline groups. The light-responsive polymer brush-terminated coarse hemispherical sides direct toward the air when the Janus composite particles self-organize into a layer on the surface of epoxy resin substrate. The imidazoline groups react with the epoxy groups in the epoxy resin to form a robust smart coating. The coating can be reversibly triggered between hydrophobic and hydrophilic by UV and visible-light irradiation, which is attributed to the isomerization of spiropyran moieties. When the hydrophobic ring-closed spiropyran form is prominent, HeLa cells can be effectively captured onto the coating. After UV light irradiation, the ring-closed spiropyran form changes to the hydrophilic ring-opened zwitterionic merocyanine form, and then the captured cells are released. This work shows promising potential for engineering advanced smart biointerfaces.

Intriguing Morphology Evolution from Noncrosslinked Poly(tert-butyl acrylate) Seeds with Polar Functional Groups in Soap-Free Emulsion Polymerization of Styrene

Herein, we demonstrate a facile approach to prepare anisotropic poly(tert-butyl acrylate)/polystyrene (PtBA/PS) composite particles with controllable morphologies by soap-free seeded emulsion polymerization (SSEP). In the first step, noncrosslinked PtBA seeds with self-stabilizing polar functional groups (e.g., ester groups and radicals) are synthesized by soap-free emulsion polymerization. During the subsequent SSEP of styrene (St), PS bulges are nucleated on the PtBA seeds due to the microphase separation confined in the latex particles. The morphology evolution of PtBA/PS composite particles is tailored by varying the monomer/seed feed ratio, polymerization time, and polymerization temperature. Many intriguing morphologies, including hamburger-like, litchi-like, mushroom-like, strawberry-like, bowl-like, and snowman-like, have been acquired for PtBA/PS composite particles. The polar groups on the PtBA seed surface greatly influence the formation and further merging of PS/St bulges during the polymerization. A possible formation mechanism is proposed on the basis of experimental results. These complex composite particles are promising for applications in superhydrophobic coatings.